I have a form that I use to collect selection criteria for reports. The controls on the form are combo boxes and date fields. After I run the report, I would like all of the fields on the form to be cleared of the selected values that were used to run the previous report. I have tried the 'repaint' method but it does not work.
Any suggestions?
Thanks,
John
I cleared a table of records and need to restart (at one) the autonumber field. I used the instructions found on on-line help but they will not reset the field back to one. Any one have a solution. I have even deleted the field and created a new one with the same name and it started with the same value it would hav used before I deleted any records.
View 3 Replies View RelatedI have five Option Groups on my form. I was running into a problem where after selecting options for one record and then moving onto the next record, the previous options would stay selected for the new record.
I "thought" I had found a solution by setting the Option Group values to Null in the OnCurrent event of the form, but I found a problem in that when going back to a previous record, it is nulling out the previously selected options. Doh!
Any ideas on how to get around this problem? I want to be able to go from one record to the next without carried over options, but I also want to be able to go back to already entered records without having them nulled out.
I have a form for student attendance that is bound to a query and stores a temporary value for ClassesAttended in a StudentEnrollment table as faculty enters the attendance. They then run an append query to write the temporary records to a StudentAttendance table. Because the ClassesAttended field is bound, when the form is opened, it recalls the last number entered for that student in that class as entered by the faculty the last time attendance was updated. I tried leaving the field unbound, but the first value enter into the first record of the form is updated automatically to all subsequent records.
Is there a way to change the properities, use code, etc. to assigne a null or 0 to the ClassesAttended field when the form opens, without the first updated record to propagate through the reaming records?
could someone please tell how i can reset an autonumber field to start from 1.
basically i have created a table and carried out a number of test with useless data. now that i have the table set up the way i want it and i have tested the queries etc i want to delete all the current data in the table and begin filling it with correct data. however i want my primary id to start from 1 which at the moment it doesn't because i have just deleted 50 records.
thanks in advance
I have a primary key field called "Issue Number", with the properties set to auto-number.
After testing, I need to set it back to zero before going live.
I deleted all the records and did a compact and repair, but the first number that comes up is the one after the last one used during testing.
Help????
Thanks
I have created quite a substantial and effective database for a small gliding club with all the major data tables being linked. I need to be able to re-index tables periodically so that running totals, which are needed to calculate statement balances, works correctly - all well and good. The only problem is that the process of re-indexing requires the data in the main table to be stored temporarily and the original data deleted. When the temporary data is appended to the main table the auto-numbering just keeps clocking up.how to reset the auto-numbering in a local table.
View 3 Replies View RelatedI have the following Event Procedures in a form:
Private Sub PrimaryDisability_Change()
Select Case Me.PrimaryDisability
Case "Other (Specify)"
PrimaryOther.Visible = True
Case Else
[Code] ....
My problem is that when I go to a new record, the fields that I want hidden in the new record unless they meet the criteria are still visible. I have looked all over online and in books to determine the code I use or whatever I need to do to make the field invisible in the new record and only to appear in each record if it meets the criteria.
Hi,
I have a make table query that deletes the old table every time the new one is made. However every time the new table is made it resets the field property for the “Date” field to “Text” rather than “Date/Time”
Does anyone know how I can avoid this problem please?
I’ve tried an update query but Access won’t allow me to perform the sum function that I require the actual query to perform. Any suggestions would be very much appreciated.
Thank you
Dean
I have form named home page in this homepage form in the form header i have inserted some fields from some tables like province, district, community etc. these fields are unbound and are used for filtering purposes, when i select a province all districts related to that province displayed and when i select a a district all related communities displayed, there is a one to many relationship between district table and community table,
What I want is, when i select a district on the form header(it is unbound as i explained before) of this homepage form, the DistrictID should appear in community subform under DistrictID(as there is a one to many relationship between district and community) .
For more clarification find the snap shot attached...
I have a form for entering Retirement Plan information (frmRRSP) that has tblRRSP as its recordsource. The RRSP Rate is a field with a Number datatype (in the table) and a Percent format on the form. When I enter a value on the form it originally displays the value I enter, until I press the Enter key, then it changes to "####" an enters a value of 0 in the table field.I tried entering a value directly in the table and it changes to 0 when I press Enter.I have an almost identical form and table for Vacation and it does the same thing.
View 3 Replies View RelatedI'm certain this question has probably been asked before, but I can't seem to find it!
I have a form field called fldTitle, and want to ensure users write something that is meaningful by evaluating words within the title to a table of keywords (tblKeywords). I know how to write the IF/ENDIF and the other stuff required, but am struggling to find the right commands to do the comparision. Could someone help me out?
Many thanks.
Greetings! This is my first post.
I have two tables: 1) tblClient, 2) tblCase.
Client records from tblClient contain a field called Client_CID (Primary Key), as the Client ID. There are also fields Client_HIGH_FILE_NO, a numeric value of the last case number assigned to the specific client and Client_PREFIX that contain a unique three letter prefix that identifies the client.
Case records from tblCase contain a field called Case_CFN (Primary Key), as the Case File Number. tblCase also contains a field called Client_CID that contains the Client ID associated with the case (obtained from a combo box lookup from tblClient).
My form is frmCase bound to tblCase.
The Case_CFN is constructed by combining the value of the selected Client_CID’s Client_PREFIX with the value of Client_HIGH_FILE_NO plus 1.
I am constructing the Case_CFN on the before update event of the combo box for selecting the client. The resulting Case_CFN may appear as follows
ABC10001
Where Client_PREFIX = “ABC” and Client_HIGH_FILE_NO = 10000
Now, I need to increment Client_HIGH_FILE_NO in tblClient by 1, meaning I need to set the value of Client_HIGH_FILE_NO for the selected Client_CID to, in this example, to 10001.
Questions:
1) Is anyone familiar with this type of number scheme generally and if so any ideas?
2) Can anyone tell me how to update the value Client_HIGH_FILE_NO for the selected Client_CID?
I'm trying to develop a form that opens when you select a tab from another form. The first form would contain Standard Instructions (from a table) and the second form would have a Memo Field for special instructions. The user wants to be able to click a check box for each standard special instruction and when they close the first form all the check standard instructions to update the special instructions memo field on the second form. I'm thinking I have to set up a loop to go thru all records when the first form is closed. Any ideas on how this would work best?
View 1 Replies View RelatedMehere,
I think that you can help me with my problem, similar to the one presented here.
I have a form that, when I select an account number, I want the Group to automatically populate on the form.
Below is the code I input on the 'OnChange' event of the 'Group' field on my form:
strFilter = "OracleAccountNumber = '" & Me!OracleAccountNumber & "'"
Me!Group = DLookup("Group", "Accounts", strFilter)
OracleAccountNumber is the name of the field on my form, and it is the name of the combo box in the table that I want to lookup.
Accounts is the table where I want to lookup the OracleAccountNumber
Group is the field from the Accounts table that I want to automatically populate.
What do I have wrong?
I have "LossForm" to record loss of inventory items due to damage, theft, etc. It has "Loss Subform" for input of multiple items. The row has a calculated field "TotalLoss" (from qty * itemcost). The footer of subform has unbound text field =Sum(nz([TotalLoss])). This all works fine. The problem I have is that I need to pass the total to another form. I want to have a pop-up form to use some of the field values from the Loss form. I have been able to pass all of the field values except for the TotalLoss.
LossForm Close Event: "DoCmd.OpenForm "Journal", , , , acFormAdd, , Me.LossID & ";" & Me.LossDate
pop up form:
Set frmPrevious = Screen.ActiveForm
Me.TransactionID = frmPrevious.LossID
Me.EntryType = "Loss"
Me.Date = frmPrevious.LossDate
{ Me.Amount = frmPrevious.TotalLoss doesn't work }
DoCmd.Save
End Sub
I also tried to setup a global, class, and module variable but keep getting error message of undefined variable.
I have a combo box field called "investigations" on a patient database which can allow multiple values. Each of its values represent the different investigations a patient can do. Now those investigations are tables and forms in the database. how can i program the database to simultaneously open these forms "on update" of that field-investigations?
View 1 Replies View RelatedI have a simple add form that will add an entry to one of two tables: Box 1-1, or Box 1-2.
They have the exact same fields. In the add form, I want the user to specify a Rack field and a Box field. Box 1-1 would be Rack 1, Box 1. Box 1-2 would be Rack 1, Box 2 (there will be more tables later, but just using two for now until I get it working).
But right now my form always adds to the table Box 1-1 - I can't get it to switch.
I've added the code I have so far below. The first part is what I'm having trouble with, the second part just uses a Submit button to add a new record - I'm just including it in case it's interfering in some way I'm not seeing. I'm running Access 2007.
Code:
Private Sub Switch_BeforeUpdate()
If Me.Rack.Value = "1" And Me.Box.Value = "1" Then
Form_Add.RecordSource = "Box 1-1"
ElseIf Me.Rack.Value = "1" And Me.Box.Value = "2" Then
Form_Add.RecordSource = "Box 1-2"
[Code] ...
I have a table listing about 20 elements as field names eg FE, CR, NI, TI and so on.
I have built a form which has a combo box listing these elements by selecting "fields" in the property settings of the combo box & next to this combo box i have 2 text box's where the user can input Min & Max values to pass on to the query.
E.g., FE (chosen from the combo box) value between (Text box1) and Text box 2.
I can run the query to give me values between the 2 text box's by using the following formula in the criteria (Between textbox1 and textbox 2).
The issue i have is to be able to select the element from the listbox, input the min & max values identified and be able to pass this to a query so the query can filter based on the field and values passed?
I have a subformClientOffers on my frmAllProperties. On the subformClientOffers is a field called Outside Agents. This field allows for multiple values to be selected.
The subfrmClientOffers is in datasheet view.
While the field Outside Agents DOES allow me to select more than one, they post in the field one after another:
Ken Shaw, John Doe, Jane Doe, Harlan Bestlyn
Therefore, the datasheet view of the subformClientOffers causes the field Outside Agents to get very long, much too long to view without scrolling. My client wishes for everything on the frmAllProperties to be viewable without scrolling.
Is there anyway, to cause the field Outside Agents to place a return between each selected name (sort of a wrap text kind of thing)?
One thing I might mention is that the field is a drop down field from tblOutsideAgents. The table itself has First Name and Last Name, but I concatenated that into Fullname on the form, so that when the user opens the drop down they see the entire name. I don't know if that would have any effect on making the 'return' thing work or not.
I can't use this field as a subdatasheet because I already have one subdatasheet attached to the subform to show multiple notes on each Client Offer.
On a form I have the following field:
Name: PaymentsMade
Control Source: =DLookUp("SumOfPrePaymentValue","qryInvoicePrepaym entSum","InvoiceId = " & [InvoiceId])
In the form's footer I have the unbound text control:
Name: SumOfPaymentsMade
Control Source: =Sum([PaymentsMade])
SumOfPaymentsMade returns #Error
How do I get it to return the sum of PaymentsMade?
I need for Access only to sum the "hours worked" of my payroll data, only if another field, "pay code" meets a certain criteria.
In Payroll, some codes are used to designate actual hours worked like REG (Regular Hours) and like OTS (Overtime Straight) while other codes are added as "premiums" to these hours and do not mean that you actually worked those hours, like OTP and HOD (Overtime Premium & Holiday Premium). The hours are only added as a reference to the actual hours worked they are attached to. Their units should not be counted as hours worked.
I want Access to 1) Group By Cost Center, 2) Sum "Hours Paid" that are tied to a REG or OTS (only), but 3)Sum the Earnings for all pay types.
Basically, (in excel-like terms: Hours Paid Column= SUMIF of Paycode = REG OR OTS. But Earnings Amount Column= Sum of all Paycodes)
Cost Center
Job Type
Hours Paid
Pay Code
Earnings Amount
20530
Security Guard II
7.5
REG
190.37
[Code] .....
So I have a combobox in a form that lists the values of a field in a table. The rowsource is this:
Code:
SELECT [Estes Training Modules].[Training Module], [Estes Training Modules].[Period] FROM [Estes Training Modules] ORDER BY [Period];
The problem is that ALL values on that field show up, including repeated values. I only need each different value to show up once. How can I do that?
For example, what I get in the combobox is: Annual, 2-Year, Annual, Annual, 2-Year, 3-Year,...
What I need is: Annual, 2-Year, 3-Year,...
I have several result fields which are all drop down lists. I want each result field's drop down list values to be different depending on the selected value of the Test1 drop down list.I came up with using the .rowsource keyword. My syntax seems to be fine but I'm not getting any values under the result fields when I run the form.Here is my code so far:
Private Sub Test1_AfterUpdate()
If Me.Test1 = "Stress Echo" Or Me.Test1 = "Stress SPECT" Or Me.Test1 = "Stress PET" Or Me.Test1 = "Stress MRI" Then
Me.Test1Result2.RowSourceType = "Value List"
Me.Test1Result3.RowSourceType = "Value List"
[code]...
I'm trying to set the control source for a control on my report that describes the number of portions that goes into a box. Sometimes there is a specific number of portions per box and sometimes it's a range. When the number of units is specific, then it is entered into the MasterCaseMinUnits Field. If there is a range of units possible than the min is entered into MasterCaseMinUnits and the max is entered into the MasterCaseMaxUnits.
I want my report to look at the mastercasemaxunits, if it is blank it will only display what is in the MasterCaseMinUnits field. If there is a value in the masterCasemaxUnits field, then it will display the masterCaseMinUnits & " - " & MasterCaseMaxUnits. this is the code I'm Using:
Code:
=IIf(Nz([MasterCasemaxUnits],[MasterCaseMinUnits])=[MasterCaseMinUnits],[MasterCaseMinUnits],[MasterCaseMinUnits] & " - " & [MasterCaseMaxUnits])
When I run my report, the control displays: #Type!
Hi there gurus...
I have made a form with various text-boxes, radio-buttons and other controls on it. The form is not bound to a table or query: I'm just using the form as a data-gathering device for my VBA code. After the user has entered the data I want to use a button to reset the boxes and controls to the way they were when the form was openened, ie as though the user closed the form down and re-opened it again. I know I can do this by resetting the .value of each control back to its default, but there's about 30 controls to reset! Is there not something like "forms!main.reset" that just resets all the controls a form back to their default values, clears out text boxes, etc etc as though the user has closed & reopened the form?
Ta
John