I have created a text field on a form that uses the DateSerial function to return the value of last month e.g. Jul-06.
I have a table that contains months (e.g. Jul-06, Jun-06 etc) and a corresponding numeric value (e.g. 1,2,3).
I have another text box on the same form that I want to display the numeric value in based on the value that has been returned by the DateSerialfunction. What properties/control source should I set for this field? Or do I need to write some VBA?
Thank you for all you help with the above title. Your suggestions were all implemented.
Code: Private Sub GPA_AfterUpdate() If DIVISION = GRADUATE Then 'Honors field is empty HONORS = "" End If If UNDERGRADUATE = True Then 'Apply appropriate honors End If If GPA < 3.2 Then HONORS = "" ElseIf GPA >= 3.2 And GPA < 3.5 Then HONORS = "CUM LAUDE" ElseIf GPA >= 3.5 And GPA < 3.8 Then HONORS = "MAGNA CUM LAUDE" ElseIf GPA >= 3.8 Then HONORS = "SUMMA CUM LAUDE" End If End Sub
Here is the issue: Form created with with a combo box called "DIVISION."The choices of the combo box are "GRADUATE" AND "UNDERGRADUATE." There is a text box called "GPA", where a gpa is entered. then, there is an "Honors" field. When a gpa is entered, the honors box returns the appropriate message.
When graduate is selected from the combobox, the honors box should be empty. (That part does not work.) When undergraduate is selected from the combo box, it works.
I have created a form based on a query with students' gpa in the form. The gpa is in a specific field. There is another field for honors with is for summa cum laude, magna cum laude, cum laude.
Here is the issue: If the students' gpa is 3.8, return "summa cum laude" If the students' gpa is 3.5, return "magna cum laude" if the students' gpa is 3.2, return "cum laude"
This applies to undergraduate students only, which there is a field for.
I have a form with three items:a checkbox called "Check231", a textbox called "text921" and another textbox called "text762".
What I wish to do is: Enter text in textbox921, which stays the same as I scroll through each record. Then If checkbox check231 is checked, it displays text from textbox921 to textbox762. Textbox762 is bounded to the form.
I need to find all EIDs where the Code is 611 where an Event# starting with F was Cancelled along with the time of the cancellation. For these results I also need the Arrived Time for the Event# starting with E for that EID.For instance, a result I'm looking for would be:
EID Event# (F) Cancelled Time Event# (E) Arrived Time
I have two tables of data. One contains balances for a set of accounts (one unique balance per account, per date). The other contains transactions for a subset of the accounts (multiple records - or possibly none at all - per account, per date)
I'm trying to write a query to return the sum of the transactions from the Transaction table, for each unique account + date combination which is present in the Balance table.
Here is my SQL :
Quote:
SELECT tblBalances.BalDate, tblBalances.AccountID, Sum(tblTransactions.Amount) AS SumOfTransactions FROM tblTransactions RIGHT JOIN tblBalances ON tblTransactions.AccountID = tblBalances.AccountID WHERE (tblTransactions.TransDate=tblBalances.BalDate) GROUP BY tblBalances.BalDate, tblBalances.AccountID;
This works fine with one major problem; if there are NO transactions for any given account + date in the Transaction table, I get no record for that combination in the dataset.
What I need is for the query to return a 0 in those situations (i.e. I should have as many records in my queried dataset as there are in my Balances table, but SumOfTransactions may be 0 for some of those balances)
I've tried the following but it has no effect on the outcome :
Quote:
SELECT tblBalances.BalDate, tblBalances.AccountID, Nz(Sum(tblTransactions.Amount),0) AS SumOfTransactions FROM tblTransactions RIGHT JOIN tblBalances ON tblTransactions.AccountID = tblBalances.AccountID WHERE (tblTransactions.TransDate=tblBalances.BalDate) GROUP BY tblBalances.BalDate, tblBalances.AccountID;
Quote:
SELECT tblBalances.BalDate, tblBalances.AccountID, Sum(Nz(tblTransactions.Amount,0)) AS SumOfTransactions FROM tblTransactions RIGHT JOIN tblBalances ON tblTransactions.AccountID = tblBalances.AccountID WHERE (tblTransactions.TransDate=tblBalances.BalDate) GROUP BY tblBalances.BalDate, tblBalances.AccountID;
I am trying to search for specific text in a field and returns its value. For instance some of string includes Sub, L2L, Temp, Model, or MTM and I would like a query to return these values if found.
When I add a record to table A (using a form) the first field I enter is a date. That date will then determine which records I see in my drop down list from table B (via a query).
Some records in table B have EffectiveFrom and EffectiveTo dates recorded - because they are now obsolete, other records have no dates recorded in these fields because they active.
How can I view and then select from the drop down only those records in table B which are effective/valid to the date entered in table A?
I have a table which includes a start date field and completion date field for housebuilding.
I am trying to extract all records that have either a started date or a completed date between 2 dates supplied by the user. I have tried to use Between on both fields but that doesn't return results between the fields.
It workd if I just do it on EITHER the start date field OR the completion date field so that implies to me that I need to break it into 2 queries, one returning start date recrods and the other returning completion date records but then I would need to have somthing that removes records that appear in both the start date and the completion date results.
Trying to run a query using criteria to populate the query by looking at information from a field on a form, if from is closed I need that criteria to look at the table and return all date in table.
I have a single table with customer information, one of the fields is a date field "LastContacted".
I'm creating a search form with 2 date fields (txtDate1 & txtDate2) to search a date range of the LastContacted field, and I need to write this into the query that the search form uses.
I have written this using Nz so that it can still return results if the search boxes are left blank:
Between Nz([Forms]![frm_AdvancedSearch]![txtDate1],#01/01/1989#) And Nz([Forms]![frm_AdvancedSearch]![txtDate2],#01/01/2999#)
This seems to work and it returns lines from the table where there is a date entered. However some of the fields in the table have no entry in the LastContacted field. How to code this query so that it also returns lines where the LastContacted field is blank in the table?
I have tried:
like "*" & (Between Nz([Forms]![frm_AdvancedSearch]![txtDate1],#01/01/1989#) And Nz([Forms]![frm_AdvancedSearch]![txtDate2],#01/01/2999#)) & "*"
Hello, Bit of a newby to all this. Am trying to use a text box as a calculted field. I am doing so using an sql statment in control source The sql stat is built and tested using build query and then copied and pasted from sql view)
I keep getting #name? as an error.
I have managed using dlookup of the same saved sql to return the required value (which works) but find it to be a bit slow and clunky so wanted to give this a go instead. If somebody can have a look at the query below I would much apreciate.
=(SELECT Sum(QryInout!CostExVATGBP) AS TTlCostExVATGBP FROM QryInout &_ WHERE (((QryInout.StockImportNoJoinToAll)=[Forms]![FrmSPurch]![ImportNoNew])) &_ GROUP BY QryInout.ProdType &_ HAVING (((QryInout.ProdType)="Freight"));)
Note that I have tried with and without the &_ and also with or with out the brackets..
Is there a way to have a text box filled out based on the value of a field. There will be only 2 possible phrases for the text box.
=IF( <Expr> Forms![Workorder]![Disposition])=("Return As Is","DISAPPROVE","APPROVE")
This is what I have tried but I get syntax error.The form is Workorder and the field is Dispostion. When the Disposition is "Return As Is" then I want to have the text box yield "DISAPPROVE" otherwise it should be "APPROVE".
I have started work on a database to track the many (several hundred per annum) projects my company undertakes. A 'main' table lists projects, their fees, their key dates, their project numbers, etc. I have created another table for tasks. Each task is assigned to a project (via the project number), and may be 'open' or 'closed'. I have separated the tasks table from the projects table as there may be several different tasks for each project. It is also good to keep a record of the tasks.
I want to prepare a report from the projects table that lists projects IF they have any open tasks.
In my mind, this means 'If a task, with the corresponding project number, is open, put a 'Yes' in the 'Tasks open' field of the Projects table.'
I have a table called Inventory (table1 - PK=INVID) that contains all inventory ID numbers and descriptions. I have another table called Inventory Transactions (table2 - FK=INVID) that gets updated through a form. When a new transaction is made in table2, I want the transaction amount to get added or subtracted to an OnHandQty field in table1. I tried having table2 (transaction table) as the main form and then table2 as the subform, but I couldn't get table2 to update.
I want to print text based upon the content of the field but need more than the IIF statement. For example, if the field contains an "A" I want to print "Active", "C" I want to print "Closed", "N" I want to print "New", etc.
Thanks in advance for any help. You guys have always had an answer in the past!
Hello, I'm working with SQL and databases in general for the first time, and was wondering: how would I select just the most recent entry for each device? my data looks [roughly] like this:
Okay I have a report (rptHorneOstbergQuestionnaire) that is based on a query (qryrptHorneOstbergQuestionnaire). In the report I have a total (HOTotal) which is the result of an expression created in the qry. Based on this result I would like to generate text in a text field (HOType) that is found in the same report.
Basically if the field HOTOtal shows any vaue between: 16 and 30 then I want the unbound text field to show the text Definitely evening typw and so on ...(see case statement below)
I thought I could do a case statement on report open but I am getting an error that my expression contains no value.
Here is the case statement
Private Sub Report_Open(Cancel As Integer)
Select Case Me.HOTotal
Case 16 To 30 Me.HOType.Value = "Definitely evening type" Case 31 To 41 Me.HOType.Value = "Moderately evening type" Case 42 To 58 Me.HOType.Value = "Neither type" Case 59 To 69 Me.HOType.Value = "Moderately morning type" Case Else Me.HOType.Value = "Definitely morning type"
I'm working on a table which has a country field, but this field may contain a text string consisting of more than one country, eg "France, Belgium, Spain"
I want to run a query against the table to select records for any one country, but not sure how to do this.
I am having problem on formatting text on a report based on a Yes/No field using Conditional Rules Manager in Access 2010. When adding a rule [field name] = Yes the font color does not change. I have tried setting the expression to [field name] = True and still does not change the color. Adding a Yes or True in query works OK.
I have a table named ColorValues with the following three fields:
- ID - MunsellCode - RGBValue
30 fields from another table called Color_Analysis are linked to the above with one to many relationships (I've already thought of other ways to normalize data, but this is the most efficient, so no need to go into this topic).
Now, I've constructed a form for Color_Analysis and all 30 fields recording color are included as combo boxes bounded on the ID in ColorValues and displaying the MunsellCode for the user. I've also created unbounded text fields next to the combo boxes and want to use them to display the color that the user selected in the ComboBox. The question is how do I do this?
Essentially I need a piece of code that picks up the value of the combo box (this is essentially the ID in ColorValues), looks up that value in the ID column of the ColorValues table and uses the corresponding RGBValue of the same table as the .BackColor for the unbounded text field.
Each each record in table1 has a unique four character (alpha-numeric) code to identify it. The first two numbers of this code represent the group it is in. (Ie. 15AB and 1502 are both grouped together) The second table stores values that apply to the entire group. I need to create a relationship between these two tables based on the first two characters in the ID field.
Things I've tried: * Making a calculated field with left$() formula - Access doesn't allow relationships on calculated fields * Create a new field for just the first two characters and create a data macro for after update and after insert to update that field with the expression - cannot edit the field the user is on
I am using MS Access 2007 and have a report which display the list of values (say 10 fields) from the basic SELECT * FROM table query.
I need to dynamically set the BOLD based on the particular value for the fifth field which was assigned from Query. if it doesn't match it should display normal.
E.g If Field_5 = "Agent" then Field_5.FontBold = True Else Field_5.FontBold = False End if
I tried the aforementioned code and it dont work. ALso i tried achieve it using below listed options.
I would like the "DateOfConfirmation" to populate with today's date when "SSurvDiagThisYear" is Confirmed.
The DateRecordCreated is a simple =Date() that populates when the record is entered into the table.
SSurvDiagThis Year is the case outcome - Pending, Probable, or Confirmed. It is possible that the case could be confirmed on the same day it was entered into the table but that is RARE.
I am hoping for the The DateOfConfirmation to capture the date the case is confirmed so that I can gather some duration between the case being opened to confirmed.
