I would like to use Access in order to duplicate the content of a list of values into new rows based on the content of a column.
Here is an example below:
List1
List2
A
1
B
2
C
3
D
4
E
5
F
6
G
7
Duplication
A1
A2
A3
A4
A5
A6
A7
B1
B2
B3
B4
B5
B6
B7
Etc
How can I achieve this in Access?
I have a list box and a series of 11 fields a user can search by. My problem is that the List Box has changed the column order.
Example: In the design wizard of the list box I had it such that the columns were in order 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Now after I hit search the fields populate out of order... 4, 9, 2, 1, etc...
How do I select the first column of a multi-column list box (called "List1") for a query.
A single column list box works fine.
Code:
SELECT Tble_Employee.Emp_No, [forms]![attendee_form]![list1] AS SelectedCourse
FROM Tble_Employee;
I have created listbox with one column (contains one column only), now i would like to display all the characters of list item (want scroll bar to listbox).
How do i display all text of list item, I have already fixed Column Widths to max length (22";0.1"). However when scrolling to right, it is going to next blank column of list box, which is created only to change Column Widths property.
I have a 2 column, multiselect listbox which is bound to a table. The querry to populate it is this:
SELECT processus.id, processus.version FROM processus ORDER BY [cle_tri], [version];
Now my problem is that when I do this:
msgbox listbox.itemdata(1) , it gives me the value of the 'id' but I want the values of both 'id' and 'version' extracted from the listbox. How do I do that? Any Ideas??
Thanks in advance.
Hi there,
I'm sure I'm not being dim, but I really can't figure how to do this.
I have a list box with two columns. One column (bound) is a name, the other is a unique ID. I need to transfer both the Name and the ID to a second list box (again, two columns).
I can get it to do this with single selections, but not multiple ones, and this is what I need.
Any ideas?
Cheers
Hi all..
I use the following code in my application to select a particular column value in a list box..
myvalue = SearchResults_LB.Column(5, i)
In my computer the column count starts with 0. So, the above statement sets the myvalue to the 6th column. But when I install the same application on an other computer it sets myvalue to 5th column.
Looks like I need to set the base value of the listbox column property somewhere!
I hope it is an easy one for many of you.
Thanks in advance.
I have a list box derived from a two column SQL select. When I try to use the user selected element I only get the first column data value.
In debugging I have tried ...
Ret = MsgBox(Me.List6.Value, vbOKCancel)
and...
Ret = MsgBox([Forms]![MeetingStatus]![List6], vbOKCancel)
Both of which return the selected row, first column value only.
I can find no help on how to return the content of the second column or the selection as a whole.
i create a project for salary company , i have a list box and have 6 columns & i have 1 textbox , i work with code and a listbox is the query know i need the value of textbox is equal with the column 1 from listbox how to do it ? like when i run form need to be enter the code when entered the code in listbox is equaled with the textbox .another question , in the list box i have one column it is about salary i want the total of salary.
View 4 Replies View RelatedI'm not familiar with listbox yet and i want to filter my form using it.
I have two separate listboxes which display "category" & "type" data from the same table.
Here is the situation i wanted for my listbox.
1. Select one data from "category" listbox.
2. Then it will automatically filter data from "type" listbox or it will list all related "type" data corresponding to "category" data.
3. Then select one data from "type" listbox and it will filter all related data on the form/sub-form.
Is it possible to do that way? Can i do it on multicolumn listbox instead of using 2 listbox?
:mad: :mad:
Hi folks,
I wonder how can I list all the column names for a given table using a single query? I know how to do it in SQL using system tables, but no idea how to do that in Access.
Thanks.
If I have a Query, and I want to list the sum of one of the columns of that query in another text box on a form, is this the correct way of doing it?
=Sum([Drivers Other Shifts].[Duration])
In this case, "Drivers Other Shifts" is the name of the Query, and "Duration" is the column header. When I try this I get #ERROR, so if it's just that something else is wrong, or that my expression is the wrong way to go about it...
why =listboxname.column(0) in the control source of a textbox will give me the value "#name?" ? I've used it successfully on another form..but for some reason its not working for me.
View 6 Replies View RelatedThe column in my list-box did not show all the text i save in the table field. is there any limited size for list-box's column to show the data ?
View 2 Replies View RelatedI am designing a contact database for a diocese and the contacts record form is divided into several tabs, some of which are hidden by default. One of the controls on the form is a listbox (lboRoles), where a user can add one or more roles to contacts. The listbox has a hidden column that defines the TabIndex for the assigned role, and my goal is to make the associated tab on the form that was previously hidden, to now be visible.
For example, if a contact is assigned the role "Committee Member" and the tabindex value for that role is 3, the form should make the hidden tab (where the page index is also 3) now visible.
I am new to Access and am trying to reduce a dataset I am working with to make it managable for Excel. I have three columns which have three unique parameters and one column with numberical content.
Column A Column B Column C Column D
NJ Red Monday 10
NJ Red Tuesday 20
NJ Yellow Wednesday 30
NY Red Monday 35
NY Green Tuesday 40
NY Green Wednesday 60
I want to elimiate column C from the dataset, and sum column D for every unique combination of Column A & Column B. I have figured out how to reduce down the dataset to get a list of all unique combinations of Column A&B,what formula I can use in a query to sum column D on my table for every unique combination of column A&B. This is a simple SUMIF in excel, but my dataset is too large for excel.
How can I sum the amounts in the list box column and show the total on the main form?
View 2 Replies View RelatedI have a data base with names, email IDs, phone numbers of 5 types(example quality, security, IT,finance etc) of person from ten different project teams. I created a basic form for the end user to enter values and created fields for each of the person's name, email ID etc based on the personal type( liek quality, IT, finance etc) on each team. The background table contains records of almost 200 people now.
All of these people will be trained for one task and some will be trained for multiple tasks. I know how to make the combo box allow multiple values/selections but, i cannot list out all 200 personal names in the combobox's rowsource/value list. Is it possible to combine all different name fields and list out all personal(of one team), so that the end user can just select multiple names for that team who have been trained and so on. i need to set the rowsource of the combobox to the values of all personal from one team so the team leader can just go select who has been trained and who has not.
How can change column color in list box and also how to make alignment left or right for cells data.
View 1 Replies View RelatedThank you for taking the time to look my question. Hopefully I can be pointed in the correct direction.
I am trying to stop duplicates in my customer table, the table is as follows
CustomerID PK
Salutation
Surname
Address1
Address2
Address3
City
PostCode
Phone
Cell
I have the surname, address1, City & Phone number Indexed(Duplicates ok)
but if the combination of all 4 fields match then I want this to be not allowed.
I guess maybe I should make the primary key the combination of all 4 fields, not sure how to do that though.
Hope this makes sense.
Thanks
Hi all
In my client data entry form i have a key field clientid if a duplicate id is entered it allows the whole form to be completed and wipes entire form on exit, this is ok but how can i get an error message to warn about the duplication of id.
Thanks
Dave
Hi,
On our database, we have a form that has 2 calendars. A start date and an End Date. The users fill in the name, and a couple other fields. Then select the start date, and end dates.
When they hit submit, the form enters into the table this info for each date in-between the start and end dates. For example if the users enters they will be taking vacation, then they enter 8/1 as a start and 8/10 as a end date. It will make an entry for each day. This works pretty well for us.
But I would like to improve it if possible.
Let say, a user a month ago made an entry that they would be work 8/23 at home. So in the database it has 8/23 at home.
Well, this week they decide they are going to take a vacation 8/21-8/25. So they make the new entry with start date 8/21 and end date 8/25. The form enters all the info just fine.
But if someone runs a report they see 8/23 at home, and also 8/21, 8/22, 8/23 ect on vacation. So gets a little confusing to where they actually are
So I was wondering if there is a way, for the database to prompt the person making the entry, that there is already an entry for 8/23 and ask if they want to delete it or save it? Then continue on creating the entries for the rest (8/24 and 8/25 in this example?).
Has anyone seen something like this? I was going to search, but not really sure what to search for on the forum.
Thanks
Hello, I am suing an append query to append new tables to an existing table. However, I only want to append the records that are not in the existing table. I have three variables: Category, Group, Project. None of them are unique. How to wirte this query.
For example: In existing Table:
Category Group Project
A 1 Pro1
A 1 Pro2
A 2 Pro1
B 1 Pro1
B 2 Pro1
Now I have two records:
A 1 Pro3
A 1 Pro1
I only want to append A 1 Pro3 to the existing table.
Thank you for your help.
Hi there,
I have a form with information on it relating to several linked tables. I would like this information to be duplicated in the tables and a new autonumber assigned.
Is there a way that I can do this by clicking one button and the autonumber will automatically generate a new number keeping the rest of the information in the form and updating the tables with a new record?.
Thanks for you help
Belinda
is there a way that I can compare the ID number from a combo box selection and a table... in order to avoid duplicating that same entry?
ie
If me.cbo1.column(0) = [table name].[field] then
me.cbo1.column(0) and me.cbo1.column(1), etc... = vbWhite
End if
What I am ultimatly trying to accomplish is a way to get rid of one selection in a combo box after it has been selected once and used for another record. is the .requery a better method... if it is, can someone please elaborate on how to use that a little more.
I have two tables.
Table one - tblContent
Table two - tblConentImport
I have built a select query that will identify all records that from the tblConentImport table that do not already exist on the tblContent table.
Here is the SQL -
SELECT [tblConentImport].[ID], [tblConentImport].[LoginName], [tblConentImport].[Title], [tblConentImport].[Type], [tblConentImport].[Code], [tblConentImport].[Date Assigned], [tblConentImport].[Date Started], [tblConentImport].[Last Accessed], [tblConentImport].[Progress], [tblConentImport].[Date Completed], [tblConentImport].[Time Spent (min)], [tblConentImport].[Score], [tblConentImport].[Result]
FROM tblConentImport LEFT JOIN tblContent ON ([tblConentImport].[Code]=[tblContent].[Code]) AND ([tblConentImport].[Type]=[tblContent].[Type]) AND ([tblConentImport].[Title]=[tblContent].[Title]) AND ([tblConentImport].[LoginName]=[tblContent].[LoginName])
WHERE ((([tblContent].[LoginName]) Is Null) And (([tblContent].[Title]) Is Null) And (([tblContent].[Type]) Is Null) And (([tblContent].[Code]) Is Null));
I then built an append qry that appends the new records to the tblContent table.
Her is the SQL -
INSERT INTO tblContent
SELECT [qrySelectContentTable].[LoginName] AS LoginName, [qrySelectContentTable].[Title] AS Title, [qrySelectContentTable].[Type] AS Type, [qrySelectContentTable].[Code] AS Code, [qrySelectContentTable].[Date Assigned] AS [Date Assigned], [qrySelectContentTable].[Date Started] AS [Date Started], [qrySelectContentTable].[Last Accessed] AS [Last Accessed], [qrySelectContentTable].[Progress] AS Progress, [qrySelectContentTable].[Date Completed] AS [Date Completed], [qrySelectContentTable].[Time Spent (min)] AS [Time Spent (min)], [qrySelectContentTable].[Score] AS Score, [qrySelectContentTable].[Result] AS Result
FROM qrySelectContentTable;
This works great as long as the [tblContent].[type] is not equal to "Class".
This select query and append query have not created duplicate records in my tblContent
Please help me. I'm loosing my mind. Below is the address to view this database. The select qry is named - qrySelectContentTable. The append qry is named qryAppend Content Table.
http://briefcase.yahoo.com/turnerbkgabrobins
Any help you can provide will be greatly appreciated.