Run Append Query AFTER Checking Criteria?

Jan 27, 2015

I would like to run an append query but only after I have checked a table for existing data. I want to see if a ralicarID exists in a table and if it doesnt the query should run. if the railcarid does exist but also has a check in and check out date then the query can also run.

I was thinking something like this

Dim RailcarInDatabase as number
' run query here that checks for the railcar id and returns a value
if railcarID in table then RailcarInDatabase =1 else RailcarInDatabase =0

And if If RailcarID in table and DateInShop is not null and DateOutShop is not null then RailcarInShop = 0

Something like that which will allow me to run the query only if the car is not in the database or it is currently not in the shop.

View Replies


ADVERTISEMENT

View A Criteria In Append Query

Jul 15, 2005

Hi, In the example attached below how can I see the "cut off date" that I am prompt to enter in the fourth field of query1-a (I would like to see it for each one of the record that are displayed when the query is run and then append it to a table)
Cheers,

View 7 Replies View Related

Run An Append Query Using Link Criteria?

Mar 21, 2007

Hi

I have an append query which runs from a command button. It transfers all the fields I want it to but when I run the query when in one particular record it not only appends the field for the current record but appends the fields for every other record in my table. I know I should be running the query using stLinkCriteria but I'm not sure on the syntax for the code, see below:

stDocName = "qryAppendOtherAdults"

stLinkCriteria = "[ApplicationNum]=" & "'" & Me![ApplicationNumber] & "'"
DoCmd.OpenQuery stDocName, acNormal, acEdit
Me.frmOtherMember.Requery

Can someone help me with this one please?

View 2 Replies View Related

Passing Criteria To Append Parameter Query Through VBA

Dec 6, 2007

Hello Everybody,

I have an append query that contains a parameter [PTIdent] under the field named PTID. I would like to be able to set the parameter through VBA from a control on a form eg Form!PTID

I use the following code as normal
Private Sub Command19_Click()
On Error GoTo Err_Command19_Click

Dim stDocName As String

stDocName = "apNewPres"
DoCmd.OpenQuery stDocName, acNormal, acEdit

Exit_Command19_Click:
Exit Sub

Err_Command19_Click:
MsgBox Err.Description
Resume Exit_Command19_Click

End Sub

Is there a way within this code to do this? I realise I could set the form criteria within the query itself. However I wanted to be able to use this query from multiple forms.

Thanks for any help

View 2 Replies View Related

Modules & VBA :: Duplicate Checking - Multiple Criteria

Jun 15, 2013

I'm using Access 2013. I want to check duplicate data. I have a form where from insert data into table but before insertion I want check multiple criteria with form. How can I do this

Field are:
BatchID
BillNum
CIH
IH

back end form code is:

Private Sub cmdCheck_Click()
Dim criteria As String
criteria = "[BatchID]=" & Me.cboBatchID & " AND [BillNum]=" & Me.txtBillNum & " AND [CIH]=" & Me.txtCIH & " AND [IH]=" & Me.txtIH & ""

[Code] ....

Finally I'm getting this error: Run Time Error 3075 Syntax Error Missing Operator in qry Expr.

View 3 Replies View Related

Modules & VBA :: Multi Criteria - Checking For A Value To Be Null

Oct 16, 2014

Me.Text11 = Nz(DAvg("[final whse-in diff]", "dbo_inventory", "[CAFETYPE]=" & Me.Text7 And "isnull(me.[DATE FIXED])=" & True And "isnull(me.DATE_IN)=" & True), 0)

I am getting a type mismatch error with this.

My question is:
1. is the syntax correct....
2. Is my way of checking for a value to be null correct....

View 4 Replies View Related

Modules & VBA :: Checking Multiple Criteria Search Code Is Correct?

Feb 25, 2015

Staff are monitored to make sure they are keeping up to date with our customers. A customer can have multiple projects going through the factory at any one time. Each customer has a record per project and a 'general' record. Ideally we would like our staff to be able to move the 'general' record when they update a project record as opposed to either having to find and then update the general record after, or forgetting and calling the customer again 2 days later!

Including a msgbox for the EnqNum seems to show the general record correctly, however being new to access I am unsure if I have the update part correct.

Code:
If Me.chkMoveGen.Value = "-1" Then
Dim EnqNum As Integer
EnqNum = DLookup("[e_id]", "tblEnquiries", "[c_id]=" & Me.txtc_id & " and [e_status] = " & "13")
DoCmd.RunSQL "UPDATE tblEnquiries " & _
" SET e_date_due=#" & Format(Me.txte_date_due, "MM/DD/YYYY") & "#" & _
" WHERE e_id= EnqNum"

View 3 Replies View Related

Use Query As Criteria For Append Query

Apr 10, 2014

I have a table of values in a table called UpdateTable. Before i do the update though i want to copy the entire record for archive purposes. I would like to know how to create an append query that uses another query as the criteria. ie;

UpdateTable - holds current values to be used to update MainTable
MainTable - holds all the data
ArchiveTable- a copy of the entire record that was updated even if only one value was updated

I would like to know how to use a query as the criteria for an update query so I can get a list of all CarIDNumbers in the UpdateTable and use that as the criteria for which records in the MainTable I want to append a copy to in the ArchiveTable.

Basically I need all the CarIDNumbers in the UpdateTable because each time I want to append a copy of all of the records and after each process I will delete all the records in the UpdateTable.

View 8 Replies View Related

Criteria In Append Queries

Nov 11, 2004

I have a table that I want to append to another table, but I do not want to duplicate records if the check number is already in the table I am appending to. I have tried
<>[deposit].[check_number]
or
not like [deposit].[check_number]
or
not [deposit].[check_number]
but I always get prompted to enter a check number... therefore the criteria statement not working.
do not know what I am doing wrong.

View 5 Replies View Related

MS Access Can't Append All The Records In The Append Query

Feb 18, 2007

hi Guys,
I have been looking at different post and checking Microsoft help files as well, but still can't seem to fix this problem.

I am having 2 tables. The first table is connected to a form for viewing and entering data, and in the second table i am just copying 3-4 fields from the first table.

I am trying to use the insert statement to insert records in the second table, and everytime i click on the "Add" button to add the records i get the following error "MS access can't append all the records in the append query ... blah blah blah"

However if i close the form and reopen it, and goto the record (as it is saved in the first database) and now click on the add button to add the fields to the second table/database, it works.

What am i doing wrong???

Any inputs will be greatly appreciated.

View 3 Replies View Related

Queries :: Checking Query For Null And Setting Operations

May 30, 2014

I have been working on an application where I am collecting survey data in a database. There are multiple survey tools available to the user, and it's possible to complete multiple survey tools in the survey.My problem is, it's possible for the surveyor to complete some tools on one day and other tools on another day. I am having problems with trying to figure out how to add a tool that has not been previously added and keep in the same survey which is all held under a single Survey Number.

The first step in the function is to set a Record Number temporary variable based on whether or not the tool has been used (it's possible to use multiple instances of a survey tool, so need to know if the Record Number is '1', or the next number in the sequence.I've been trying to do this by checking a query for a Null and setting the temporary variable using something like:

IF ISNull("RecordNumber","qryRecordHeader") Then '1'
Else
DLast("RecordNumber","qryRecordHeader") +1
End IF

The second half works just fine, so if there is a previous record, it will add. But if it's Null, it doesn't work.I'm trying to avoid opening a temporary form to run the query and checking a field. Is there a way around that?

View 3 Replies View Related

Setting Query Criteria To Be 'blank' Depending On The Criteria Of A Combo Box

Oct 21, 2006

I have set up a database that stores actions (i.e jobs). In the table; two of the fields are...'required completion date' and 'actual completion date'. I wish to lookup, by using a query, all of the open actions (those which havent yet been complete (i.e the 'actual completion date' is null)) and then later on all those which are overdue (i.e the 'actual completion date' is null And the 'required completion date' <today....this being the criteria for an overdue action).

However, I have used a form which has a combo box which contains the values open and overdue. When a selection has been made I want a form to display with the results depending on the selection that has been made. I am capable of creating a form based on a query, but am unsure of how to construct the query with the correct criteria based on the option that is selected from the form.

Any help would gratefully be appreciated. Thanks

View 5 Replies View Related

How To Query Data For Specific Criteria - Criteria Help

Aug 20, 2007

I have data for hundreds of stores. The data was pulled for the top 15 items by store, so I cannot obtain only the top 5 items that I need. How can I query this data to extract only the top (or bottom) 5 Subjects, by store, based on the percentage column?

StoreSubjectSalesSales %
1516Fiction56431.5-24.15%
1516Audio Unabridged1650.8-231.04%
1516History / Military History10081.1-29.99%
1516Role Playing / Graphic Novels14773.9-20.27%
1516Mystery13152.6-19.84%
1516Audio Abridged1785.9-141.84%
1516SciFi / Fantasy27535.3-7.93%
1516Juv Audio/Video1580.6-100.13%
1516Biography8103.6-15.89%
1516Sports7910.8-15.64%
1516Current Affairs / Law8141.9-14.34%
1516Reference7183-16.22%
1516Juv Non-Bk4585.9-25.02%
1516Science / Tech2961.4-33.98%
1516Movies / TV / Music / Dance3395.3-29.46%
1872Fiction307344.3-7.49%
1872Business134307.5-13.48%
1872Psych / Self Improvement100650.4-10.05%
1872Audio Unabridged29165.9-27.32%
1872Cookbooks57463.3-13.56%
1872Computers59235.7-12.37%
1872Regional59883.4-11.22%
1872Health & Fitness64713.8-10.29%
1872Maps19358.4-27.66%
1872Current Affairs / Law47927.1-11.08%
1872Travel Foreign42583.7-12.27%
1872Religion / Bibles80255.6-6.07%
1872SciFi / Fantasy67641.4-6.49%
1872Study Aids / Notes38299-11.24%
1872Games41745.1-9.79%

View 2 Replies View Related

Queries :: Opening Design View Of Append Query Without Timing Out Source Query

Mar 4, 2015

In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.

All is well and fine until source data changes and the pass-through query runs too long and times out.

If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table

Is there a way to open an Append or Make-table query in Design view without invoking the source query?

View 1 Replies View Related

Append Query .v. Table Query .v. Headache!

Mar 20, 2007

Ok, this is what I want to do :

I want to 'append' individual records from 2 tables and place in an archive table or within another database, whichever is the best option.
I then want to be able to 'delete' the relevant records from one table.

The tables are tproperty and trents. This property paid rents but has since been sold. Therefore it no longer belongs in the database, however client wishes to keep details of the property/person/and rents paid in past, for any future ref. These tables are linked in relationships to tlessee and tbilling.
I've read books/notes/looked on here for inspiration and the right direction! If I choose 'append' which seems pretty straight forward then a 'delete' query, how do I choose only one record? Is a make-table onto a different database a better option? It would appear that the whole table is copied over? Can't understand the issue about auto-numbers being copied over? Do I have to use an append/delete query for each individual property that's ever removed?
I'm at a loss! :) Thanks

View 1 Replies View Related

Help With Append Query

May 11, 2007

I have a database that contain foreclosure records. I'd like to create a query that will ask for a date and all records that are LESS than the date will be moved to a different table.

I'd also created an icon on my form and I'd like to attach this query to it.

Any help will be appreciated.

Bruce

View 10 Replies View Related

Append Query

Oct 6, 2006

Please how can i use a procedure to create a query, then append the content of the query to a table (am using MS Access Project)? i did it in Microsoft acess database but now i need it on Microsoft access Project beacuase am transfering to SQL server.
Thanks

View 3 Replies View Related

Append Query + Sum ?

May 26, 2005

hello,

i have 3 tables:

ACAD_U:
ID
PROIZ_A
TIP_A
DN_A
KOS_A

IN_U:
ID
PROIZ_I
TIP_I
DN_I
KOS_I

ZALGA:
ID
PROIZ_Z
TIP_Z
DN_Z
KOS_A
KOS_I
KOS_Z


Now i want to create an append query that will add in table ZALGA fealds PROIZ_I, TIP_I, DN_I, KOS_A, KOS_I by critera if TIP_A = TIP_I AND DN_A = DN_I then calculate KOS_Z = KOS_I - KOS_A?

Can someone pls tell me how to do that?

THX

View 2 Replies View Related

Append Query

Jun 14, 2005

Hi,

I am building a database to hold information of training courses and staff that have requested or completed the training course.

I have built a form which the team leaders can use to request training for their team, basically when the form opens up it asks for team name and training session and then appends the names and training session ID to the main table. This then allows the team leader to tick the "request training" tick box which updates the table for each member they request trainig for.
They would then send this using a custom command button which is linked through outlook.

The problem I am encountering is that if they were to selct the same team and training session again it would then append the same data to the table and this would create duplicate entries.

How can I set it up so it appends only once and then any other time the same data is selected by team leaders it would populate the form with the existing date rather than appending the same data.

thanks in advance.

View 1 Replies View Related

Append Query

Jul 28, 2005

Dear all,
I have a trouble to run the append query. It is failed due to the key violations. Could you please help me how to solve this problem?
Many thanks.
Bich

View 1 Replies View Related

Help With Append Query

Sep 22, 2005

Hi,

Any assistance someone can give me with this append querry issue is appreciated.

I have a table called tblRoleAssignments that has three fields RoleAssignmentID (PK), RoleprofileID & ApplicationrightID. It looks something like this.

RoleAssignmentID,RoleprofileID,ApplicationrightID
58, 12,317
59, 12,796
60, 12,1
61, 13,179
62, 13,84

my append query will write new records depending on the RoleprofileID's I entered, for example If I run my append query on the above list I get the following output

RoleAssignmentID,RoleprofileID,ApplicationrightID
63, 0, 317
64, 0,796
65, 0, 1
66, 0, 179
67, 0, 84

My problem is when I run my append query I want it to enter a specific value in the role profile ID column (taken ideally from a field on a form that will be loaded) so instead of the query entering a zero it writes to the table a vaule I want. Below is how I want my append querry to write the data if I wanted the RoleprofileID to be set to 35.

RoleAssignmentIDRoleprofileIDApplicationrightID
63, 35, 317
64, 35, 796
65, 35,1
66, 35, 179
67, 35, 84

Any ideas????????

View 5 Replies View Related

Append Query

Sep 27, 2005

I think i need to use an append query for this but have never used on before so just need to know if it is the right thing to do.

I have two tables [tblPoles] and [tblPoleInstructions].

I have a form set up for [tblPoles] so the user can enter the data required. One piece of data required is a start date. The only fields the tables have in common are the PK which is the Pole Number and the start date.

I want the user to be able to enter the start date on the form for tblPoles and it to be automatcially entered into tblPoleInstructions. Is an append query the right way to do this?

Any help would be greatly appreciated.

View 2 Replies View Related

Append Query Help!!

Oct 15, 2005

I have made some amendments to my brothers Database. Now I have a problem. How the hell do I append the data from his old one into his new one? It all seems very complicated. Can anybody advise? Basically the tables of primary interest are:

Append From tblCustomers1 to tblCustomers
Append From tblCustomerContacts1 to tblCustomerContacts
Append From tblOrders1 to tblOrders
Append From tblOrderDetails1 to tblOrderDetails
Append From tblPayments1 to tblPayments

How is this possible as Orders relate to Customers, Order Details relate to Orders, Payments to Orders, Contacts to Customers.....my brain is scrambled!!

Help on understanding Append queries appreciated.
Regards,
Phil.

PS: Have attached a small sample DB.

View 14 Replies View Related

Append Query Help

Oct 17, 2005

I have a simple one here I think, but I am a newbie to SQL and Append Queries.

I have an Order Tracking Database with three tables:
Orders (contains PK OrderID)
OrderDetails (Contains PK OrderDetailsID and FK OrderID)
Updates (Contains PK UpdateID and FK OrderDetailID)

The Orders table contains customer info and an order number (OrderID). This is manually entered, not an Autonumber. The OrderDetails table contains line items for products sold with that order. The OrderDetailID is an autonumber, and each record contains the OrderID field as a FK in a one-to-many relationship. Basic stuff. The Updates table is used for tracking the status of each product associated with an order as it flows through the back-end sales process, from production to shipping. The UpdateID field is the PK (Autonumber) and each record contains the OrderDetailID as a FK in a one-to-many relationship.

I do a monthly update of Orders and OrderDetails into those respective tables in Access on a monthly basis. I am just using cut and paste from a .csv file at this time. I am doing this because our company uses a Siebel program for tracking front end sales, but it does not do any back-end tracking at this time. So, I export the monthly sales as a .csv and import into Access. It seems to work fine for now, but it has been suggested in other discussion groups to use a temp table of the raw .csv data, import into Access, and create an Append query to update the Orders and OrderDetails. I will look into that.

The problem I have today is how to get Access to automatically create a new record in the Updates table for each OrderDetailID. So, when I paste (or later append) OrderDetails into the OrderDetails table, Access creates at the same time a new corresponding record in the Updates table. Each OrderDetailID can have many UpdateID's (one-to-many relationship).

I think I need a SQL statement that says "Update the Update table UpdateID with a new autonumber if the FK field OrderDetailsID within the Update table is null" or something like that.

Please help.

View 1 Replies View Related

Append Query HELP

Dec 5, 2005

I have a Form with a combo box that takes in formation from a table and auto fills it. But i cant get that autofilled info to enter into the main table.the one that the form is based off of. I tried to use an append query to move the info from one table to the other. It didnt work. does anyone know why this error pops up i cant see anything wrong...

Concrete Pumper Database Set 0 fieldsto Nulldue to a type conversionfailure, andit didnt add 3 records due to key violations, 0 records due to lock violations and 0 due to validation rule violations...


in detail what im trying to do is this. database is for remote control concrete pumpers.

I have a form based on a table. In this table i have fields such as model #, button 1 configuration-button 12 configuration date entered, date shipped etc.I created a form from the table and Instead of entering each of the 12 button configurations I would like to have that entered automatically when a model # is selected from a combo box. So i made a table with just model # and button configurations and set up a combo box on the form to match. now i need to get the button config from the button config table to be entered into the MAIN TABLE when entered into the form by combo box. oh man...i dont know if im too far gone or what...this may not make sence so please give it your best...I appreciate any input at all. I thought i could do it with an append query and a macro but now i dont think so.


thank you

View 1 Replies View Related

Append Query

Dec 15, 2005

I have a database with a table linked to an Excel spreasheet. I am trying to create an append query to load data from the linked table into a candidate table. Each record in the candidate table has a candidate number which is automatically generated and is the primary key. When I run the query it cannot update the table because of key violations. I haven't got the candidate number as a field in the append query, do I need to put it in there? and if so how should it be setup? Any help would be much appreciated. :)

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved