Run A Create-table Query Every 2nd Hour
Sep 18, 2006Hi
I have made a create-tabel query that I want to run every 2. hour. How can I set Access up to do this automatically?
eroness
ADVERTISEMENT
Day/Hour/Minutes Query
Nov 16, 2005Can anyone tell me if there is a way of displaying a number, which represents the number of minutes of elapsed time, into the format days:hours:minutes elsapsed?
For instance the number (in minutes) 1530 would display as = 01:01:30. 1 day, 1 hour & 30 minutes of elapsed time.
Any help would be appreciated.
Paul.
Query Data By Hour
Jul 28, 2006I have a very large dataset with over 11 million data records in three different databases! Currently the data is collected on average every minute, which is much too detailed! I would like to pull data for every site on the hour, or somewhere near the hour as some data was collected at different time intervals. (this latter part is a completely different issue, I would be happy just to get my first query working, then deal with data not collected exactly on the hour)
I wrote a query and tested it out on a very small portion of the data. It seems to be working, but for some reason won't pull data for the 2 pm, 5 pm, or 8 pm hours...even though the data is there in the table. Any reason why this may be? Even if I simplify the query to only pull out those hours, and not all 24 at once, the data still doesn't get selected. I really can't think of why it's not working. Any suggestions?
I've currently set up the Criteria in the time column of the query to look like this:
#1:00:00 AM# Or #2:00:00 AM# Or #3:00:00 AM# Or #4:00:00 AM# Or #5:00:00 AM# Or #6:00:00 AM# Or #7:00:00 AM# Or #8:00:00 AM# Or #9:00:00 AM# Or #10:00:00 AM# Or #11:00:00 AM# Or #12:00:00 PM# Or #1:00:00 PM# Or #2:00:00 PM# Or #3:00:00 PM# Or #4:00:00 PM# Or #5:00:00 PM# Or #6:00:00 PM# Or #7:00:00 PM# Or #8:00:00 PM# Or #9:00:00 PM# Or #10:00:00 PM# Or #11:00:00 PM# Or #12:00:00 AM#
Is there a better way to go about this?
Thanks!
Ok, I am still interested in knowing why the above query wasn't working should anyone know. But while thinking of how to deal with my other data not on the hour...seemed to have made a few queries that do the trick! Access is great...but sometimes very slow to get what you want done when you're still learning!
Query Maximum Number In Hour Per Day Every Cell ID
Jul 13, 2015I need to know about "Need to query result from access2007 find only "one maximum number" in hour per day every cell ID"
How I use sql command?
See my file at ...
Create Table Query
May 31, 2005Hi
Is there a quick way to split up a table into many other tables? I want to split the table by Client Number, so all the Clients with 1234, for example, are in a table called Client1234
I know the very long winded way, creating a ‘Create New Table’ query, inputting the Client Code criteria each time.
Is there a better more efficient way?
Thanks
coley
Create Table Query
Mar 9, 2007Hi,
I wrote a script which creates a new table and append records into it. Here are my codes:
For Each rst In dbs.tabledefs
If rst.NAME = "Biweekly_Temp_Table" Then
dbs.tabledefs.Delete rst.NAME
dbs.tabledefs.Refresh
End If
Next rst
qryBtt = "SELECT DEDPARMS" & payp & ".EMP_ID, DEDPARMS" & payp & ".FORMAT_NM, " & _
"Sum(IIf(Right([DEDPARMS" & payp & ".Dedtype_CD],1)='R',[overded_am],0)) AS [Employer Amt], Sum(IIf(Right([DEDETAIL" & payp & ".Dedtype_CD],1)='R',[DEDETAIL" & payp & ".ded_am],0)) AS [Employer Actl], " & _
"Sum(IIf(Right([DEDPARMS" & payp & ".Dedtype_CD],1)='A',[overded_am],0)) AS [Admin Amt], Sum(IIf(Right([DEDETAIL" & payp & ".Dedtype_CD],1)='A',[DEDETAIL" & payp & ".ded_am],0)) AS [Admin Actl], " & _
"Sum(IIf(Right([DEDPARMS" & payp & ".Dedtype_CD],1)='E',[overded_am],0)) AS [Employee Amt], Sum(IIf(Right([DEDETAIL" & payp & ".Dedtype_CD],1)='E',[DEDETAIL" & payp & ".ded_am],0)) AS [Employee Actl], " & _
"First(DEDPARMS" & payp & ".STATUS) AS FirstOfSTATUS, First(DEDPARMS" & payp & ".AGENCY) AS FirstOfAGENCY, " & _
"First(DEDPARMS" & payp & ".TITLE) AS FirstOfTITLE, First(Right(DEDPARMS" & payp & ".title,2)) AS RepUnit, Left([DEDPARMS" & payp & ".DEDTYPE_CD],2) AS Type, " & _
"Left([DEDPARMS" & payp & ".DEDTYPE_CD],2) AS LeftType, Sum(DEDPARMS" & payp & ".NBR) AS SumOfNBR, First(DEDPARMS" & payp & ".DEDTYPE_CD) AS FirstOfDEDTYPE_CD1, " & _
"First(Right([DEDPARMS" & payp & ".DEDPlan_CD],2)) AS Tier, First(Left([DEDPARMS" & payp & ".DEDPlan_CD],2)) AS Carrier, DEDPARMS" & payp & ".DEDPLAN_CD Into Biweekly_Temp_Table " & _
"FROM DEDPARMS" & payp & " LEFT JOIN DEDETAIL" & payp & " ON (DEDPARMS" & payp & ".EMP_ID = DEDETAIL" & payp & ".EMP_ID) AND (DEDPARMS" & payp & ".DEDTYPE_CD = DEDETAIL" & payp & ".DEDTYPE_CD) " & _
"GROUP BY DEDPARMS" & payp & ".EMP_ID, DEDPARMS" & payp & ".FORMAT_NM, Left([DEDPARMS" & payp & ".DEDTYPE_CD],2), Left([DEDPARMS" & payp & ".DEDTYPE_CD],2), DEDPARMS" & payp & ".DEDPLAN_CD " & _
"HAVING (((First(DEDPARMS" & payp & ".STATUS)) Not In ('P'))) " & _
"ORDER BY DEDPARMS" & payp & ".EMP_ID, First(DEDPARMS" & payp & ".STATUS);"
DoCmd.RunSQL qryBtt
NOW THE ISSUE IS, AN ALERT MESSAGE ALWAYS POP UP SAYING SOMETHING LIKE, "You are about to paste 34590 row(s) into a new table." What would I have to do to get rid of this pop up? Eventually my users are going to use this and I don't want them to be alarmed when the message pop up.
Thank.
Joe
Create Table Query
Feb 13, 2007can I use create table query and change a fields data type?
I have a field with numbers, but when I get the table, it is set as a text field. I want it to be a number field, but I can't change the orignal table. That's why I was going to use a create table query, but I can't figure out how to change the data type from text to number.
Thanks
How Do I Create A Query Like A Pivot Table?
Nov 15, 2005Hi Forumers...
I have data in a table that looks like this...
SITE-ID | VALUE
Site 1 | 20
Site 1 | 21
Site 1 | 16
Site 2 | 8
Site 2 | 9
Site 2 | 12
etc...
I would like to create a query that allows me to show summary statistics for each site. eg...
SITE-ID | VALUE_MIN | VALUE_MAX | VALUE_AVG
Site 1 | 16 | 21 | 19
Site 2 | 8 | 12 | 9.667
etc...
Am relatively new to MS Access and can't work out how to create a query that does this. Any help will be appreciated.
Using MS Access 2000 (9.0.7616 SP-3) on Windows 2000
Thanks,
Chris Medlin
Create A New Row For Each Table Column In Query
Oct 26, 2006I have a table which stores multiple materials in different columns, and the analysis results for each material in the associated cell. I need to create a query which will display a new row for each material and result with all the appropriate associations (location, date, time, etc.) Is there a way to do this in a single query? Do I have to create a separate query for each material?
Ultimately, I need to create an excel file which displays each material, the analysis result for that material, and the associated site, date/time values in a new row for each material.
Thanks for any help.
Create VIEW From SQL Query On A TABLE Using VBA
Nov 8, 2006How can we do this? Can someone pls help? The query should be part of the code. Like create a variable strSQL = "SELECT * FROM ...." and so on
Newbie here :)
Little Help To Finish A Create Table SQl Query
Dec 26, 2006Hi,
I have the below in an SQL query that is called by a button (At present) that creates a table with an autonumber Primary Key (Can do a single Autonumber PK or a multiple field PK at the moment with the SQL code), and i want to create a table but the table name (An maybe some fields) to be from a field in the table. How can i do this, and is the below correctly written?? it works OK, but may be untidy.
CREATE TABLE Discharges ( MainID COUNTER CONSTRAINT MainID PRIMARY KEY, DischargeDate1 date,
Program1 varchar, Eligibility1 yesno, Cap1 currency, Phase1 varchar(111),
SRFA1 yesno, DischargeDate2 date, Program2 varchar,
Eligibility2 yesno, Cap2 currency, Phase2 varchar, SRFA2 yesno,
DischargeDate3 date, Program3 varchar, Eligibility3 yesno,
Cap3 currency, Phase3 varchar, SRFA3 yesno, DischargeDate4 date,
Program4 varchar, Eligibility4 yesno, Cap4 currency, Phase4 varchar, SRFA4 yesno, testlabel memo)
Have tried:
CREATE TABLE [Form1].[User] (
CREATE TABLE Form1.User (
and then made the record save (To store the field value on the form) before running the SQL code, but nothing happens (No errors)
Thanks
Dan
Create Table AS Select Query
Oct 25, 2007Hello all,
Is there anyway to create a table from a query like you can in oracle?
i.e.
Create Table [B_match] AS
SELECT *
FROM [B_All]
Take care
General :: Need To Create Query From A Table
Apr 14, 2014I have an old ERP system. The upload function is one line per value. So if I want to upload 7 models I need 7 lines, not one line with Qty of 7
however my source system sends the data as one line with Qty of 7
DLM2245/17DLM2245/17X1
DLP2204/17DLP2204/17X7
DLP2249/17DLP2249/17X7
DLV1004/17DLV1004/17X147
DLV1005/17DLV1005/17X158
DLV1009/17DLV1009/17X187
so in this example line 1 is fine. But line two needs 7 lines, and line 3 needs 7 lines and line 4 147 lines etc etc etc.so this is how the first three lines would look in the query.
DLM2245/17DLM2245/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
DLP2204/17DLP2204/17X
[code]....
Urgent Help Needed With Table Create Query.
Aug 6, 2007Hi all, i need some help constructing a query that will create a table for me that does not include the Type value of 'promotion' if the same ID value exists elsewhere within the query.For instance, in the example below, i would want to delete the first entry containing 'Promotion' because ID2001 exists in two other places. However, if only one instance of ID2001 'Promotion' existed in my query, i would want to keep that entry. I would prefer to write all my data to a new table called "Test", This query has to sort out about 1000 entries when executed, otherwise i'd do it manually.I'm pulling my hair out with this one, so could someone help me?ID Company Name TypeID2001 Disc plc John PromotionID2001 Disc plc Paul AgentID2001 Disc plc George Agent
View 3 Replies View RelatedQueries :: Create Summary Query For Each Table?
Dec 5, 2013I have three tables with data.
Table1 is data for meals.
Table2 is data for room costs.
Table3 is data for payments made.
Each of these tables has a foreign key for EventID.I'm trying to produce a report that will show, for each EventID:
The total billed (which is meals + rooms)
The total paid (from Table3)
The balance due (the difference from the two above).
Do I have to create summary queries for each table?
Query That Will Select All Tables In The Database And Create One Table
Sep 16, 2007I have a rotating number of tables that are created from excel spreadsheets that are imported. The Tables will change, but when they are there I need to be able to create a query that will merge them all together so I can run one query against all the tables. In SQL I know you can use a * to say Select *
From Table_1
Is there a syntax for the From portion so I can say:
Select *
From * (AKA all the tables in the Database)?
I have searched for a wildcard for the FROM statement that works like in the select statement but have been unsuccessful at finding an answer. Can anybody help? I'd list the Tables in the from Statement but there are 266 of them. Unless someone knows how to say:
Select *
From All tables in a folder with 266 excel spreadsheets
Thanks for your help
:)
Adding Fields In A Table To Create New Field In A Query
Mar 14, 2008I've got a fields called rev code that contain the following values:
field name: 110 131 250 255 258
field value: 7.49 6 11.25 12.11 78
I'm writing a query that pulls from the first two digits of the rev code and need to round off to the nearest dollar so in my query I'll have a column 11 with a value of 7, a column 13 with a value of 6, then I need to take columns 250 255 and 255 add the values together and round off so I get a column 25 with a value of 101.
How do I do that?
Queries :: Create Table Query From Multiple Fields?
Aug 14, 2013i essentially have 2 table:
1. Table BIC
A list of codes that will be updated monthly, which will be the basis for querying the second table. Approx 100 rows of data.
2. Table Original
A data file obtained from IT where i'll need to sort it to find any codes that are including in Table1. This includes approx ~ 10,000 row of data.
** note, the "BIC" from "Table BIC" can appear in any of the 5 BIC columns in Table Original.
What i need to do is create a query that will:
1. Search the "BIC" from "Table BIC" in all 5 columns of "Table Original".
2. Where it has a hit, it will create new table - for example, the first row of table Original includes the BIC "ABC" in the "BIC 1" column. A query would create table "ABC" and place this whole record (all 8 fields) in new table "ABC". No modification needed.
3. Where two (or more) BIC's from "Table BIC" appear in one record in "Table Original" - the result will only need to be placed in one of the new tables (really doesn't matter which one). For example, Record #4 includes the BIC "ABC" in field "BIC1" and the BIC "DEF" in the field "BIC4". Therefore, a new table would be created (either ABC or DEF) to capture this information.
Queries :: Create Query To Sort Table In Particular Order
Feb 28, 2014I have a table with multi columns with unsorted data.
I want to run query to sort data in multiple columns.
How can i do it?
General :: Using Both Query And Table To Create Pivot Chart
Sep 7, 2014I was just wondering if I could use a query and table to create pivot chart? and If so how I could do this? I need information from both in order to create the chart I want.
View 1 Replies View RelatedQueries :: Create Numeric Query Fields In MAKE Table
May 25, 2014Have a Make table query that needs to create (add) several new fields where each field must be numeric design.
Have tried:
Score1: Not Null - does not seem to work (results in a Binary field)
Score1: 0 - which does give me the numeric field designation but every field in table contains a 0.
Would like to show Blank field (makes data input easier at a later time) but still have the Numeric designation.
Access 2010 Hanging During Create Table Query Or Export?
Jun 7, 2013I am trying to work with Access 2010 to do some pretty simple stuff. I have two tables, one with around 500k rows, the other with around 150k rows. There aren't too many columns, less or around 20 for each table.
I am just trying to do a simple inner join and then create a table but every single time I do it gets about 20% done on the status bar in the bottom right and just hangs. The query itself takes no time to run but it can't create it as a table. Same thing happens if I try to export the query.
Way To Create A Query / Table Where Access Automatically Makes A Due Date?
Aug 11, 2015I use Access 2013. Is there an easy way to do the following: I have a contract that starts on eg 01/07/2015. Tenant has to pay 100 each month. Is there a way to create a query/table/... where access automatically makes a due date? EG: Joe needs to pay me 100 each month, starting 01/01/2015 until 31/12/2018.
This means:
01/01/2015 - due 100 from Joe
01/02/2015 - due 100 from Joe
...
01/12/2018 - due 100 from Joe
Hi, Need Help With Subforms Within The Hour
Feb 11, 2008Hi, I have a main form with a subform inside it. The subform contains two records but only one is shown during form view, is there any way to show both records at the same time?
I am using continuous forms view for my subforms as i have to.
Group By More Than 1 Hour
Jul 25, 2005i have a table of time and dates and a value after it inn which i want to do a query which groups these values by every 3 hours e.g
my table
12/02/2001 00:00 6
12/02/2001 01:00 4
12/02/2001 02:00 8
12/02/2001 03:00 12
12/02/2001 04:00 7
12/02/2001 05:00 6
i want the query to do this
12/02/2001 02:00 18
12/02/2001 05:00 25
i cant find anything anywahere and its use ids for a chart in which the chart wizard allows grouping by 1 hour and not by more than 1 hour any help will be much obliged
cheers
DMax + 1 Hour
Jul 1, 2006I've searched the forum and can't quite find what I need so I'm asking for further guidance form all you Access masters out there!
I have a field 'Time' in the format of 'dd/mm/yyyy hh:mm' which has a default value of =DMax("Time ","[Monitoring]")+1.
This increments 1 on the 'dd' bit when each new record is created, however what I want is for the hour (hh) bit to increment 1 on each new record.
Not sure if I'm being niave but I thought it was some sort of formatting issue, so I've dabbled with a few but to little effect unfortunately.