I have a continuous form with button for every record, wich has a VBA code. I want to put Button in header form, when i click it, then should run all button in continuous form. How can I do that.
View RepliesI have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
I'm using Access 2007.
So I have a continuous form and I have a button that is pressed when a job is released and it record a date in a field. I wanted to turn that button to disabled after pressed but after lots of reading found that it couldn't be done in a continuous form due to it disabling all buttons . So I decided to just make the code populate the field only if it was a null value so that it wouldn't overwrite a value if someone pressed it more than once. Well the null is my downfall in all this. I cannot make it compare and populate the date when the button is pressed. I have tried all I can find on the net and all I can think of.
View 11 Replies View RelatedI have a continuous form that displays all my customers .I want to be able to dble click a customers ID and go to there customer details form.
View 14 Replies View RelatedI have continuous form in Access 2010 and I would like when user will click on record, the image, for instance, imgTest become visible for that record. But for other records the image not visible. How it to do?
View 6 Replies View RelatedOften I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code.
The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime"
Do While Forms!frmdatetime!OKFlag.Caption = "False"
DoEvents
Loop
When this code is run by clicking on a command button, it works fine.
If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime.
If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
Thanks
Richard
I have a continuous form reflecting events. The notes field is too large and so has to be it's own form. I made a button that is supposed to open the notes for the record. But it doesn't matter which record I'm on, it clicking the button always brings up the same note - it doesn't link the criteria and open only the correct record in the notes form. Is this because it's a continuos form? How can I fix this?
View 8 Replies View RelatedThere is a continuous form with a check box in each row and a command button(cmdDetails) in the form footer section. You select a record and press cmdDetails and another form opens.
Rather than in the footer, I would like to have the command button placed in the details section itself, in each row, against each record, so that the check box can be eliminated. Pressing any button will open the corresponding form. how I can "associate" each record with the button next to it.
Hello everyone!I need to call the button_click procedure for a button on a form (button1), from another form, if you see what I mean!.Basically the user opens form1. They click a button which opens form2. Once they have finished on form2 they press the close button, which is the point where I need to call the button1_click procedure on form1.I imagine it's something like this:Call Forms![frmForm1]![button1]![Click] orCall Forms.[frmForm1].[button1_Click()]But no matter what syntax I try it just won't work! They're very basic forms, with only 2 buttons on and basic commands.Any help appreciated! Thanks
View 5 Replies View RelatedAfter data is entered into text box, on the "On Enter" event, how do I make it click a button on the form?Similar to the effect of when you enter your username then password, most people just hit enter on the keyboard to auto click the login button.
View 1 Replies View RelatedI have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
Hello there,
I was wondering if any of you experts out there know a way to help me out here.
I was wondering if it is possible to color the text on the last pressed button on a continuous form different from all the others, so people will know which one they pressed last?
I've been trying a lot of different things here but i'm stuck. All i can get done is that all the buttons turn a different color, but doesn't solve anything.
I hope some of u can help me out here.
Greetz,
And thanx in advance,
Rutger
Good Evening,
I wonder if anyone could help me please.........
I have found Ghudsons attached ‘Browsing2’ example to be of enormous
benefit/use to me when I have been creating various Databases, however I was wondering whether Ghudson or any other kind person(s) would either show or point me in the right direction as to how to create a ‘Delete’ facility which is very similar to the ‘Open’ command button on the continuous form.
I have attempted to adapt the enclosed 'coding' to see if it will come up with the result that I want, but unfortunately I cannot!
Attachment kind courtesy of Ghudson
http://www.access-programmers.co.uk/forums/showthread.php?t=97787&highlight=browsing
Your help or assistance in this matter would be very welcome...........
Best Regards
CarolW
I am trying to make a simple form to tally my total products ordered.
So I wanna add a plus and minus button on my continguous form, but i cant get it to work. How do i update the current record when clicking on the button next to the field ..? It seems only the first record gets updated ..
I am creating a program to allows us to figure out where our personnel are. I am using a continuous Form that shows the individuals name, phone numbers etc. and infront of that is a checkbox, and a combobox that shows "Leave", "TDY", "Contacted" etc. I also have two fields that fill up with what time they were contacted or when they reported in. The default status is "Not Attempted and the checkbox is not checked, and the time fields are blank.
I attempted to use this code:
Dim ctl As Control
For Each ctl In Me.Controls
Select Case ctl.ControlType
Case acCheckBox
ctl.Value = False
Case acComboBox
ctl.Value = "Not Attempted"
End Select
Next ctl
but it will only clear the one line (it doesn't clear the times yet, i figure i'd add that once I figure out to clear one). This seems to work if this was a single form, but not for continuous. How can I convert this for continuous forms?
I have documents (mostly Word) stored in an Access table. The table contains two fields. (1) a text field with the document's name and (2) an OLE field that holds the document.
When I press a button with the document's name on it (or it could be a hyperlink or a dropdown) on a form then I would like the document stored in the matching OLE field to open in the appropriate program for that document.
If I could set the permissions of the document to read-only then that would be great too. If I could prompt for read-only or read-write (no password necessary) access upon opening then that would be even better.
I can store documents in the table, but I have no idea how to launch them from a form button (or hyperlink, or dropdown).
Note: This is all within Access. This is not a web page related question.
Thanks in advance,
Andrew
How do i do it?
i can make a buton and edit stuff, im currantly learning VB .NET at the mo if that helps at all!!!!!
I have created a button that works fine however it will only work one click per form load and i cant seem to figure out why.
Code:
Private Sub BntExpired_Click()
Dim QryAllCourses As recordset
Do Until ExpiryDate > Date Or ExpiryDate = ""
MsgBox ([FirstName].Value + " " + [SecondName].Value + "'s course in " + [CourseName].Value + " has expired")
recordset.MoveNext
Loop
Exit_BntExpired_Click:
Exit Sub
Err_BntExpired_Click:
MsgBox Err.Description
Resume Exit_BntExpired_Click
End Sub
I would like to highlight record when user will click Record Selector in the continuous form. How to do it?
View 1 Replies View RelatedHere is the scenario:
Form 1 - Data entry for a new project
Form 2 - Data entry for a task associated with the project in the Form 1
Button on form 1 that opens Form 2.
What I am trying to do:
Use a combobox on Form Two to choose the Project entered into Form 1, so I can capture the Form1 PK as a FK on Form 2.
Here is the problem:
Refreshing the record on the button click so that the new option entered into Form 1 shows up in the combo box on Form 2.
Full disclosure:
I'm not much good at VBA so I have been trying to do this by customizing the button macro. I have tried Refresh, and Requery, but I can't seem to get it to update the list in the combo box.
2 questions:
1. How can I get this accomplished?
2. Is there a better way to get this data into the table than what I am trying to do?
i want to ask is there any way to open another access database using when click button at form.. for example i have tracking.accb then at my switchboard form, i would like to have a button that can go to another access which is borrow.accb. can these possible for me to do it..?
View 3 Replies View RelatedI want to ask is there any way to open another access database using when click button at form.. For example i have tracking.accb then at my switchboard form, i would like to have a button that can go to another access which is borrow.accb. Can these possible for me to do it..?
View 4 Replies View RelatedI have two command buttons in a subform "sbfScoutRegDetails", one that launches a report and the other attaches the report pdf to an email, associated with the record ID when clicked.
Both of these buttons work fine when just the subform itself is open, but when viewing it in its main form, I get a window saying 'enter parameter value' for "Forms!sbfScoutRegDetails!ID" (this is the WHERE condition in the macro).The report then opens with all the record information blank.The full WHERE condition
Code:
[ID]=[Forms]![sbfScoutRegDetails]![ID]
Not sure if it's because of using a continuous form as a subform? I need the user to be able to view/print or email a contract to each group/contact that signs up.
I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
View 2 Replies View RelatedI'm new to Access and I'm using Access 2010.
I would like to be able to click a button on a form in my data base and login to a website using my username and password.
The manual login, requires two clicks after username and password, "Login" and "Click to continue"
I have tried many solutions found on the internet, none work for me. One forum reply was to send me a link to another site and it was for Excel. Is the code the same? Didn't work anyway.
From the website I want to login to, I have copied the code into a Word doc from the "inspect element" to work out the names of the fields I'm trying to put my username and password into. (see attached)
I would also like to be able to use Google Chrome as my web browser if possible?
How to open a search form with a mouse click on Button_Search
My idea is to pop up a form where user can enter the search text and select the required name and get back to the old form with all details about the entry. This form alone is workign fine. I want to call it in a mouse click. and pass the data back to old form.