Run-time Error '13' Type Mistype

Mar 16, 2005



I created a Duplicate command/macro on a form and, when it is clicked on, a message appeared 'Run-time error '13' Type mismatch'. Debugging the command showed the problem was this code line:

MsgBox Err.Number, Err.Description

in the bDuplicateCurrentRecord section (shown below).

Below is the whole Duplicate coding. The coding was copied from another Duplicate template db as I am no expert on coding. It worked on 97 version but not on 2000 version.

Private Sub bDuplicateCurrentRecord_Click()
On Error GoTo Err_bDuplicateCurrentRecord_Click

Beep

Dim sBookingID As String
Dim sSerialNo As String
Dim sNameOfHost As String
Dim sTrustOrNonTrust As String
Dim sDepartment As String
Dim sContactTelephone As String
Dim sContactMobile As String
Dim sContactFax As String
Dim sDateOfRequest As String
Dim sDateOfFunction As String
Dim sTimeRequiredStart As String
Dim sTimeRequiredEnd As String
Dim sVenue As String
Dim sReasonForBooking As String
Dim sNoOfGuests As String
Dim sStandingOrder As String
Dim sComments As String
Dim sBookingReceivedBy As String
Dim sNonStandardCharge As String
Dim sTrustTotalCost As String
Dim sNonTrustTotalCost As String
Dim sWhenPaymentMade As String
Dim sPaymentMethod As String

sBookingID = BookingID
sSerialNo = SerialNo
sNameOfHost = NameOfHost
sTrustOrNonTrust = TrustOrNonTrust
sDepartment = Department
sContactTelephone = ContactTelephone
sContactMobile = ContactMobile
sContactFax = ContactFax
sDateOfRequest = DateOfRequest
sDateOfFunction = DateOfFunction
sTimeRequiredStart = TimeRequiredStart
sTimeRequiredEnd = TimeRequiredEnd
sVenue = Venue
sReasonForBooking = ReasonForBooking
sNoOfGuests = NoOfGuests
sStandingOrder = StandingOrder
sComments = Comments
sBookingReceivedBy = BookingReceivedBy
sNonStandardCharge = NonStandardCharge
sTrustTotalCost = TrustTotalCost
sNonTrustTotalCost = NonTrustTotalCost
sWhenPaymentMade = WhenPaymentMade
sPaymentMethod = PaymentMethod

DoCmd.GoToRecord , , acNewRec

BookingID = sBookingID
SerialNo = sSerialNo
NameOfHost = sNameOfHost
TrustOrNonTrust = sTrustOrNonTrust
Department = sDepartment
ContactTelephone = sContactTelephone
ContactMobile = sContactMobile
ContactFax = sContactFax
DateOfRequest = sDateOfRequest
DateOfFunction = sDateOfFunction
TimeRequiredStart = sTimeRequiredStart
TimeRequiredEnd = sTimeRequiredEnd
Venue = sVenue
ReasonForBooking = sReasonForBooking
NoOfGuests = sNoOfGuests
StandingOrder = sStandingOrder
Comments = sComments
BookingReceivedBy = sBookingReceivedBy
NonStandardCharge = sNonStandardCharge
TrustTotalCost = sTrustTotalCost
NonTrustTotalCost = sNonTrustTotalCost
WhenPaymentMade = sWhenPaymentMade
PaymentMethod = sPaymentMethod

sBookingID = ""
sSerialNo = ""
sNameOfHost = ""
sTrustOrNonTrust = ""
sDepartment = ""
sContactTelephone = ""
sContactMobile = ""
sContactFax = ""
sDateOfRequest = ""
sDateOfFunction = ""
sTimeRequiredStart = ""
sTimeRequiredEnd = ""
sVenue = ""
sReasonForBooking = ""
sNoOfGuests = ""
sStandingOrder = ""
sComments = ""
sBookingReceivedBy = ""
sNonStandardCharge = ""
sTrustTotalCost = ""
sNonTrustTotalCost = ""
sWhenPaymentMade = ""
sPaymentMethod = ""

Exit_bDuplicateCurrentRecord_Click:
Exit Sub

Err_bDuplicateCurrentRecord_Click:
If Err = 94 Then 'Invalid use of Null'
Beep
MsgBox "A box is incomplete. Please ensure that all boxes are completed before attempting to duplicate the current booking.", vbInformation, "Invalid Duplication"
Exit Sub
ElseIf Err = 2113 Then 'The data you entered is not valid for this box.
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bDuplicateCurrentRecord_Click
End If

End Sub


Private Sub bDeleteCurrentRecord_Click()
On Error GoToErr_bDeleteCurrentRecord_Click

Beep
If MsgBox("Are you sure you want to delete the current record?", vbQuestion + vbYesNo, "Delete Current Record?") = vbYes Then
DoCmd.RunCommand ac CmdDeleteRecord
End If

Exit_bDuplicateCurrentRecord_Click:
Exit Sub

Err_bDeleteCurrentRecord_Click:
If Err=2501 The 'The RunCommand action was cancelled
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bDeleteCurrentRecord_Click
End If

End Sub

Can anyone help?

Thanks.

Paul

View Replies


ADVERTISEMENT

Run-time Error '13': Type Mismatch

Apr 12, 2006

I don't understand why I'm getting this message.

I have a form that is based on a parameter query. The user inputs an item number and the form opens in edit mode. The user clicks the "duplicate" command button and then changes the item number. I've incorporated GHudson's "A Better Mouse Trap" logic and when clicking "save" I get the type mismatch error.

I don't understand why Access is not returning the 3022 duplicate entry error.

When I click "debug" Access highlights the line as shown below:

Err_bSave_Click:
If Err = 2046 Then 'The command or action Undo is not available now
Exit Sub
Else
MsgBox Err.Number, Err.Description
Resume Exit_bSave_Click
End If

End Sub

Any and all assistance is appreciated.

Randy

View 6 Replies View Related

Error With Date/Time Data Type

Jan 4, 2005

Hello all - One of my 3 users' computers keeps coming up with an error when I try to enter the following command in the "Validation Rule" field of the table design view:

>=#1/1/1998# And <=Date()

Some investigative work showed that it's erroring on this clause: "<=Date()". Any idea why it would error on her pc and not the other 2 pc's? Her pc is old, but we're all using Access 2002. The error says: "The function you entered can't be used in this expression." Any thoughts would be helpful. Thanks much.

Dan

View 3 Replies View Related

Modules & VBA :: Run Time Error - Data Type Mismatch In Criteria Expression

Aug 11, 2014

I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:

Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean

[code]....

View 5 Replies View Related

Forms :: Add Time Value To Time Data Type SQL Server Field In Access

May 6, 2015

how to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)

View 1 Replies View Related

Date/Time Type

Oct 25, 2007

I am having problems with this query:
DELETE * FROM [TableOfTrainees] WHERE [TableOfTrainees].[CurrentYearTrainingDate]="" AND [TableOfTrainees].[LastYearsTrainingDate]="";
When I try to run it, an error points to the criteria.
Both CurrentYearTrainingDate and LastYearsTrainingDate are Date/Time format.
I need to be able to check if those fields have a date in them or are blank ("", IsNull and IsEmpty do not seem to work).
Any ideas are deeply appreciated -- thanks ahead of time!

View 1 Replies View Related

How Can I Do Summation To Time Type Field??

Jan 17, 2007

hi,

I have atable with fields time in and time out (short time type), in aquery i did a diffrence between that to fields, so I can know to evry employee every day how many hours work.

but, my problem is how do summation to the work hours to the month (it's a short time type).

example, an employee work from 8:30 to 15:00 in the first day, second day work from 9:10 to 14:20 ....etc
at the end of the month i want to have report from query which give me sum. of hours the employee workes.

thanks to help me

suhad

View 2 Replies View Related

How To Obtain Date Type Without Time Attached

Feb 3, 2015

I have a field [CurrentDay] of type Date/Time. The values for this field are entered through the selection from the date picker. However the time of the day always come along with the date - even if it is not seen. This creates a huge problem when making a query based on this field because no results will be returned unless the time is included with the date in the criteria.

The other part to the problem is that I cannot find a built in function in the expression builder to generate the current date without appending the time - now() certainly does not do that - even if the time is not seen it is there.

View 3 Replies View Related

Cannot Set Validation Rule On Date / Time Type

Oct 12, 2013

I need to restrict data input to the following: "09:00" Or "11:00" Or "13:30" Or "15:30"

This rule works when the data type is set to text, but not on Date/Time with short date set as format

How to get a Date/Time type to accept only one from these four values.

View 2 Replies View Related

General :: Cannot Set Validation Rule On Date / Time Type

Oct 12, 2013

I need to restrict data input to the following: "09:00" Or "11:00" Or "13:30" Or "15:30"

This rule works when the data type is set to text, but not on Date/Time with short date set as format

get a Date/Time type to accept only one from these four values.

View 4 Replies View Related

Tables :: Format Property - Time Data Type

Jul 6, 2013

I have a date/time field. I would like to:

Enter time this way and have it show in the form as:
Enter 5 - show 5 PM
Enter 515 - show 5:15 PM
etc.

I would like it to default to PM and not have to select or enter the PM. How do I enter this format in the table?

View 5 Replies View Related

Modules & VBA :: Append Time Value To A Date Data Type Variable

Jun 27, 2013

I have a variable (dtDueDate as Date) showing as 6/28/2013. I want to append a time value to it (dtMaxTime as Date) which is 5:00 PM so dtDueDate reads 6/28/2013 05:00:00 PM. I have been going in circles trying to figure this out. My goal is to append this date to a table field which has a datetime (General Date).

View 6 Replies View Related

Type Conversion Error

Feb 13, 2007

i am importing from excel and i have a column that has account numbers and at some point i have an account like this... 2C1C18100

on the import i get an error.

i set the field to memo, numner or text and still get the same error..

any suggestions?

thanks in advance

View 9 Replies View Related

Mismatch Type Error

Feb 25, 2005

Hi I'm doing some work on an open source intranet for a friend and I've come unstuck with data types I guess.

Microsoft VBScript runtime error '800a000d'

Type mismatch: 'str'

D:SITESEXTRANETCLIENTS../includes/connection_open.asp, line 104

I added a date field and now get this error.

The process is as follows:

add user - client-add.asp
client-add-processor.asp (& siteSQL.asp include)

the error occours on submiting the original form page

new feilds:

Code:<form method="post" action="client-add-processor.asp" name="strForm" id="strForm">..............edited...............<tr><td><b class="bolddark"><%=dictLanguage("HostingPeriod")%>:</b></td><td><input name="HostingPeriod" size="20" value="<%=Session("HostingPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','HostingPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr><tr><td><b class="bolddark"><%=dictLanguage("DomainPeriod")%>:</b></td><td><input name="DomainPeriod" size="20" value="<%=Session("DomainPeriod")%>" class="formStyleShort" onkeypress="txtDate_onKeypress();" maxlength="10"><a href="javascript:doNothing()" onclick="openCalendar('<%=server.urlencode(date())%>','Date_Change','DomainPeriod',150,300)"><img border="0" src="<%=gsSiteRoot%>images/calendaricon.jpg" onmouseover="this.style.cursor='hand'" WIDTH="16" HEIGHT="15"></a></td></tr>

To client-add-processor.asp

Code:sql = sql_UpdateClient( _session("Name"), _session("Rep"), _session("Client_Since"), _session("Standard_Rate"), _session("Address1"), _session("Address2"), _session("City_State_Zip"), _session("LiveSite_URL"), _session("DevSite_URL"), _session("Contact_Name"), _session("Contact_Phone"), _session("Contact_Email"), _session("Contact2_Name"), _session("Contact2_Phone"), _session("Contact2_Email"), _Active, _session("client_id"), _session("ClientFolder"), _session("HostingPeriod"), _session("DomainPeriod"), _session("Notes"), _session("WebFolder"))'response.write(sql)Call DoSQL(sql)%><!--#include file="../includes/main_page_open.asp"-->

includes/main_page_open.asp

Code:Function MediumDate(str) Dim aDay Dim aMonth Dim aYear aDay = Day(str) -line 104 'aMonth = Monthname(Month(str),TRUE) aMonth = Month(str) Select Case aMonthCase 1aMonth = "Jan"Case 2aMonth = "Feb"Case 3aMonth = "Mar"Case 4aMonth = "Apr"

SQL

Code:Function sql_InsertClient(Client_Name,Rep_ID,Active,Client_ Since,Standard_Rate,Address1,Address2, _City_State_Zip,LiveSite_URL,Devsite_URL,Contact_Na me,Contact_Phone,Contact_Email,Contact2_Name, _Contact2_Phone,Contact2_Email,HostingPeriod,Domain Period,Notes)dim sqlsql = "INSERT into tbl_clients (client_name,rep_id,active,client_since,standard_r ate,address1," & _"address2,city_state_zip,livesite_url,devsite_url,c ontact_name,contact_phone,contact_email,contact2_n ame," & _"contact2_phone,contact2_email,hostingperiod,domain period,notes) VALUES (" & _"'" & Client_Name & "'," & _Rep_id & "," & _Active & "," & _"" & DB_DATEDELIMITER & MediumDate(Client_Since) & DB_DATEDELIMITER & "," & _Standard_Rate & "," & _"'" & Address1 & "'," & _"'" & Address2 & "'," & _"'" & City_State_Zip & "'," & _"'" & LiveSite_URL & "'," & _"'" & DevSite_URL & "'," & _"'" & Contact_Name & "'," & _"'" & Contact_Phone & "'," & _"'" & Contact_Email & "'," & _"'" & Contact2_Name & "'," & _"'" & Contact2_Phone & "'," & _"'" & Contact2_Email & "'," & _"" & DB_DATEDELIMITER & MediumDate(HostingPeriod) & DB_DATEDELIMITER & "," & _"" & DB_DATEDELIMITER & MediumDate(DomainPeriod) & DB_DATEDELIMITER & "," & _"'" & Notes & "')"sql_InsertClient = sqlend Function

Thanks in advance for any pointers.

View 3 Replies View Related

Forms :: Combo Box Where List Of Choices Are Narrowed In Real Time As You Type

Sep 29, 2014

I would like to create a combo box (or something similiar if a combo box simply can't do it) where the list of choices in the pulldown shows only the matches of what a user types in. The list of choices are coming from a field in a table. Also I would like the "search" of the user's input to include what is "within" each choice, e.g. if a user type "ber", then valid results should be bertha, october, robert.

View 1 Replies View Related

Type Mismatch Error In Query

Jun 15, 2006

I am trying to do a basic query and I keep getting a "Type Mismatch" error and the query will not run. If I only do a query on one table, it works no problem so I know it must be related to my Join between tables.

For the two tables that are joined (it is one-to-many)- the first table is a clients table and I created a field called ClientNumber that is an AutoNumber. The second table is called TrainingRequests. This will store the training requests for each client and each client can have multiple training requests. I created a field called ClientNumber in it as well (this is what field I linked the tables by). But I set it to text instead of AutoNumber.

Is there a way to do a query with the two tables? Or will I have to change something in table design? I already have some data in the tables so I am not sure what direction to take.

Thanks for any help someone can provide. It would be greatly appreciated.

View 1 Replies View Related

Dlookup Type Mismatch Error

Feb 15, 2005

Can someone please help with the following:

Dim strX As Variant

strX = DLookup("State", "TblScheduleK12004", "[PartnerID] = '" & Forms!FrmPrintRpt!cboClient & "'" And "[SetNum] = " & Forms!frmPrintRpt!txtSet)

[PartnerID] is a text field
[SetNum] = is a number field

I can get it to work with the Partner ID OR the SetNum but keep getting the error when I add the "AND" to include both.

View 2 Replies View Related

Error: There Are No Registered Wizards Of This Type...

Oct 18, 2005

In Microsoft Access 2000 I'm getting the following error message when I click on visual basic Event Procedure for the first time.

"There are no registered wizards of this type."
"Rerun Microsoft Access or Microsoft Office Setup to reinstall the wizards. If you want to preserve your security or custom settings, back up the 'workgrp file name here' workgroup information file.
For more information on backing up files, search the Microsoft Windows Help Index for 'backing up files'."

After I click OK on the error it goes back to Access. If I click the event procedure again visual basic opens up though VB the screen isn't what it suppose to be. The Object and Procedure pull downs at the top of the page disappear behind my toolbars and I can't get it to setup correctly. If I try to maneuver them correctly they still don't line up. This error seems to be messing that screen up.

This is only happening in one of my databases. In my other database the Object and Procedure pull downs at the top of the page are coming up correctly. If I start a new database that works fine too. I'm not sure why its doing it only on this database

I'm worried my VB is corrupted. Looking for any insight on what caused this and how to fix this.

Thanks!

View 5 Replies View Related

Data Type Mismatch Error

Jan 26, 2006

Hi

I am getting the following error when I try to present some information from a database:

Microsoft JET Database Engine error '80040e07'
Data type mismatch in criteria expression.
/tribute2.asp, line 168

The code relating to this is:
The error line it is talking about is:
Code:rsGuestbook.Open SQLstr, adocon

Code: <%Dim adoCon 'Holds the Database Connection ObjectDim rsGuestbook'Holds the recordset for the records in the databaseDim SQLstr'Holds the SQL query for the databaseSet adoCon = Server.CreateObject("ADODB.Connection")adoCon.Open = "PROVIDER=Microsoft.Jet.OLEDB.4.0;DATA SOURCE=c:inetpubftprootlocalusericlay
emember ing.co.nzdb
emembering.mdb;"strcustomerID = Request.QueryString("remID")Set rsGuestbook = Server.CreateObject("ADODB.Recordset") sqlstr = "select * from guestbook where guestbook.mid =" & strcustomeridrsGuestbook.Open SQLstr, adoconDo While not rsGuestbook.EOF'Write the HTML to display the current record in the recordsetResponse.Write ("<font face='Arial' size='2' color='#000080'><i>A tribute provided by ")Response.Write (rsGuestbook("confirstname"))Response.Write (" ")Response.Write (rsGuestbook("conlastname"))Response.Write ("</i></font><font face='Arial' size='1' color='#000080'><i> ")Response.Write (rsGuestbook("conrelationship"))Response.Write ("</i></font><br><br>")Response.Write (rsGuestbook("conmessage"))Response.Write ("<br>")'Move to the next record in the recordsetrsGuestbook.MoveNextLoop'Reset server objectsrsGuestbook.CloseSet rsGuestbook = NothingSet adoCon = Nothing%>

Can anyone see where I have gone wrong ... could it be something to do with the fact that 'remid' relates to another table in the database. Though when I did a reponse write on the sqlstr it is presenting the remid.

Hope this doesn't sound to confusing.

View 8 Replies View Related

Modules & VBA :: Getting A Type Mismatch 13 Error

Jul 15, 2015

I am getting a "type mismatch 13" error on this line

Code:
PrinterSel = Nz(DLookup("Device", "tblPrinterSelection", "Doc='" & DocumentType & "'" And "Computer='" & sHostName & "'"), "No Printer")

All vba variables are defined as strings. All fields in the table are text.

mafhobb

View 2 Replies View Related

Mismatched Data Type Error #3464

Apr 28, 2008

Hello All,

I changed one of my queries to generate the period off a date in a field. The simple expression is:

Period: Month([Act Del])

It give me the number of the month...however now I am getting this error. I assume that the number of the month is not matching with the other data types....but I need to know who to fix it.

any ideas?

Thanks

View 4 Replies View Related

Object Type Invalid Or Blank Error

Oct 7, 2004

I am getting the following error when I run my report:

"The Object type argument for the action or method is blank or invalid"

I am running the following code from a report.

Thanks

Private Sub Report_Open(Cancel As Integer)
Dim intRetValue As Integer
intRetValue = MsgBox("CREATE EXCEL SPREADSHEET?", vbYesNo)

cswSetReportOptions
MsgBox "cswSetReportOptions complete"
'mac - new record source to filter blank company name
Me.RecordSource = "SELECT * FROM qry2 WHERE strCompanyName <> """" "

If intRetValue = vbYes Then
MsgBox "Creating excel spreadsheet"
DoCmd.OutputTo acOutputReport, , acFormatXLS, "Book1.xls", True
DoCmd.Close
End If
MsgBox "Creating Access Report"
End Sub

View 3 Replies View Related

Type Conversion Failure - I Don't Want To See The Error Message.

Jul 21, 2005

Good afternoon all,

I have a macro that I run. In this macro, I've changed the "SetWarnings" to No. This works since I do not get a "Are you sure..." when I do a makeTable query and the table already exists.

However, I do get a type conversion failure error message.

Does someone know how I click Yes on this without any intervention on my part when the macro is running? Would entering keystrokes in the macro work? I don't think that they will since the next command is not called until the previous has executed ... and I'm getting hung up on the dialog box before the make-table command has finished execution.

I've attached the error message text that I'm seeing.

Thank you for your time and help.

View 6 Replies View Related

Audit Trail Type Mismatch Error

Jul 18, 2006

Could someone please help. I am in a serious time crunch and cannot figure out what I have done wrong. I have copied the module attached for the audit trail and have implemented it into my database. For some reason when I go to run the BeforeUpdate event I get a 13-Type Mismatch error. I have found a fix that will allow me to use the code without flagging an error, but I am not sure it is working properly now. Here is the fix.

1. Pass the form as an argument of the function
Function AuditTrail(frm as Form)

2. Comment out these lines in the code
'Dim frm as Form
'Set frm=Screen.ActiveForm

3. Call the function in the BeforeUpdate event of the form and or subform as follows:
Call AuditTrail(Me)

Many thanks,
CB

View 4 Replies View Related

Modules & VBA :: Error - Type Mismatch On Imports?

Mar 17, 2014

common error in VBA imports. It has happened with spreadsheets and text files I have users importing. An error message pops up "Type Mismatch." But the import appears to work correctly. So I added code that On Error, if error Like "*Type mismatch*" continue to next step. Now the user gets a longer error message: "The expression On Click entered as the event property setting produced the following error: Type mismatch." Again, the import still works, but this message is annoying! The even stranger thing is that I do not get this error message on my machine. Just the other users.

View 4 Replies View Related

Queries :: Keep Getting - Type Mismatch In Expression - Error

Dec 1, 2014

I've been trying to get a query to run but I keep the "type mismatch in expression" error message.It's the Invoice-Product Query in the attached file.I have tried changing the field types, the primary keys and messed around with the relationships but noting seems to work.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved