I am trying to put together this report where I can see how many hours the printers were running in a month's time. The sum property for this is working up until it reaches 24 hours then it starts all over again. How can I get it to keep adding hours when it gets to 24?
For example: 20:35 + 6:25 = 3:00
learnasugo
I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
Can anyone tell me how to get a running balance on a report. I know how to create a running total, by setting the "running sum" property of a text box to "Over all".
I can't however see how I can adapt this to give a running balance (as in a bank statement for example). Attempts to do so end up in failure!!
Many thanks in advance.
Peter
Ahhhh this is doing my nugget in!!! I have a simple table with 4 fields
ID (unique number)
DATE (date)
CAPACITY (number of SKU we can hold)
ORDERS (number of SKU on order)
the data looks like this
ID DATE CAPACITY ORDERS
1 01/01/2007 250000 250000
2 02/01/2007 250000 300000
3 03/01/2007 250000 300000
4 04/01/2007 250000 300000
So looking at the above table we can see that we have more orders than capacity in our factory, however they require to see this in graph form, so what I need is for each ID a running total of the CAPACITY and ORDERS so over a given date range i would produce a graph to find the "pinch points" where we could see if the capacity is less than the orders we have over time.
so my new table would be:
ID DATE CAPACITY ORDERS CAPRUN ORDRUN
1 01/01/2007 250000 250000 250000 250000
2 02/01/2007 250000 300000 500000 550000
3 03/01/2007 250000 300000 750000 850000
4 04/01/2007 250000 300000 1000000 1150000
etc. which i would create my graph from. Ive looked at Dsum and some other methods but cant get my head around it so any help will be much appreciated.
Thanks Steve.
Hi
I'm trying to create a database to keep track of invoices .
on work that was done.is there any sample database that I could take a look at.Or can anyone help me on this I'm trying to capture price on parts + price on labor = total the order form in the tradewinds database looks good but don't know where the code is for calulations? can anyone help me out?
Thanks
Tom
Im having a problem doing a running total on my form.
I want the result to be displayed in a text box, with the figures being collected from a column of figures.
Any help is appreciated
My friends, please help me figure this out. I am new to MS-ACCESS. I am trying to create a simple Leave system for my office. When a user requests a leave, the number of hours will be added to a table. I have created a form for this purpose. What I would then like to happen is, the next field in the Table is the sum of hours requested thus far. So that field would be Requested + Total requested Thus far. I can do it easily in Excel but I can't figure out how to do that in ACCESS. It is a very simple database and I can mail you my sample if you are interested. Thanks in advance.
yallah.
aliyallah@yahoo.com
Does anyon ehave any experience of running totals in an access query.
I'm reporting the data through excel not access reports so need a query not a report solution..
I have a table which looks:
RegionCategoryTypeDesc Period_IDPeriod_YTDPeriodTotal
CanadaEventsWSOP Team67Budget15000
CanadaEventsWSOP Team78Budget0
CanadaEventsWSOP Team89Budget0
CanadaEventsWSOP Team910Budget0
CanadaEventsWSOP Team1011Budget0
CanadaEventsWSOP Team1112Budget0
CanadaEventsWSOP Team1213Budget0
CanadaEventsTOTALAll12Budget15000
CanadaEventsTOTALAll23Budget15000
CanadaEventsTOTALAll34Budget15000
CanadaEventsTOTALAll45Budget15000
CanadaEventsTOTALAll56Budget15000
What I would like is to have an additional column which keeps a monthly summary of spend based on running total month 1to 12. All items have months 1 - 12 and are ordered in that fashion.
Any helpo really appreciated.
Simon
Hi guys
I am making a query that calculates how much costs i have per job. I'd like to create a function in the query that can calculate how big a percentage each job is. (need total for every job/ total for all jobs) but so far i haven't been succesful in this.
Anyone who could help me?
Cheers,
Takstein
I have a table called Team Standing that includes [TEAM] [PLAYER] [GAME DATE] [POINTS]. From this table I have a query that provides for each game date and team a count of the players, [GAME DATE] [TEAM] [PLAYER COUNT]. [PLAYER COUNT] is calculated using the total COUNT .
What I would like to add is a cumulative running total over the game dates. For example.
[GAME DATE] [TEAM] [PLAYER COUNT] [TOTAL PLAYER COUNT]
2007/01/05 --- 1 ------- 11 -------------- 11
2007/01/12 --- 1 ------- 8 -------------- 19
2007/01/19 --- 1 ------- 14 --------------- 33
I am having trouble figuring out how to get a cumulative running total. I have tried a number of different sub-queries and selects but I can’t seem to get something that works.
Any help or ideas would be greatly appreciated.
Thanks
Hi,
Am trying to create a query for a chart where I can total the employees over time but am having real trouble creating a running total from the "Total" field within a query but cannot seem to get it at all.
TotalStartDateLeftDate RunningTotal
126/03/1957
121/03/1971
127/02/1986
115/02/1988
207/03/1988
007/03/198831/05/2007
Here is my current SQL query:
SELECT Sum([CountOfStartDate]-[CountOfLeftDate]) AS Total, Atest1.StartDate, Atest1.LeftDate, Sum([CountOfStartDate]-[CountOfLeftDate]) AS RunningTotal
FROM Atest1
GROUP BY Atest1.StartDate, Atest1.LeftDate;
Can anyone help please?
I've been tasked to create a report that shows the date an employee hit a loss of $200.00 or greater for the company. Each day they work, they will either have an overage or a shortage in their till fund. They start out each day with a set amount of money in their till and at the end of the day they are expected to turn in that same amount; the tills are used for making change. If they are short, and the amount is fairly large, hence the $200.00 mark, then it becomes an issue that needs investigating.
I need to total these amounts up and when the total hits a negative $200.00 or greater, I need to display the date it occurred and then display the amount the company would have saved if the employee had been either terminated or transferred to a non-revenue department.
Getting the "saved" amount should not be a problem once I figure out how to get the above indicated loss amount.
Any ideas?
Kevin
Hello, I am new so if I am posting in the wrong board, please feel free to move this.
My question is as follows:
I have several tables set up to track the grants my office adminsters. These include Project Information, and Payments. I am attempting to keep a running total (in each funding source) that shows up in the Payments form. I am not sure how to build the query for this.
Example:
Grant A has the following funding:
$20,000 -Capital Projects FY04
$50,000-Federal Funds FY06
The following payments have been made (each payment would be a seperate record:
$1,000- Cap FY04
$2,000- Fed FY06
$4,000-Cap FY04
$8,000-Fed FY06
Suggestions?
PS-I am really not that great with VB so if you could explain it as if I were 5 that would be great
This should be easy! Right?
I have a series of dates with events that occured on those dates. Some events were extended, others were not how do I get a running total, cumulative total, for all records in the RunTotal column?
Opened DateOpen IssuesCountOfExtendedNotExtRunTotal
5/21/2007 1 10 1
8/6/2007 1 10 2
10/8/2007 1 10 3
11/1/2007 1 10 4
11/8/2007 1 01 5
12/5/2007 1 0 1 6
Thanks for your help.
Hi,
i'm working on a report about firm's personal. i have to calculate a column as running total. But i could not.
Please help me.
i am sending my file.
best regards.
I have a form that calculates number of hours each month. So a little box for Jan, Feb, etc.
At the bottom I have another field that sums it up. Well Im using just basic + to add the fields and it only works where there is something in each box.
I can't go through and put zeros in for everyone since a 0 and a blank mean two different things. I tried Dsum and just now after searching the forum, I tried nz.
Am I overlooking a real nice function that would assume a blank entry in the sum is a zero? or perhaps some trick I could try? Also, is there anyway to store the calculated total in the associated table, so I can query it later? It already has its own specific field that up until now was hand calculated and entered manually...like the monthly hours.
Thanks in advance
I have a form that has a "Quanity" field on it as well as a "# Times Printed" field.
I'd like to have the "# Times Printed" be a running total of the "Quantity" field where everytime a "Quantity" is entered, it updates the "# Times Printed"
I've played around with a few idea's but haven't had much luck.
Thanks
Scott :)
I need HELP PLEASE!
I have created a table from importing the data from an Excel spreadsheet. Then I created a simple query using the wizard and adding all the fields that the table had into the new query.
Here is the problem...
I created a couple of expressions using the expression builder for a couple of the fields and I am stuck on how to create an expression for a running balance column.
For example: I have a QTY column (not calculated), a Price 1 column (not calculated), another Price 2 column (calculated with an "If" expression used to look-up a code in one column and if it meets the criteria then it would return a different price than what is in the Price1 column, and a Subtotal column. I need a Balance column (which would start with, for example, $10.00 and then deduct the subtotal amount.
QTY Price1 Price2 Subtotal Balance
- - - - $10.00
1 1.00 - 1.00 $9.00
2 1.00 2.00 $7.00
1 - 2.00 2.00 $5.00
I need very detailed, but very simple directions and fast. I have tried DSum (doesn't work) and every expression I could think of. I need this done in the query I started or in a new query. I don't have Access on this computer, so please sent directions versus a sample database.
Please Help...
what I think is a running total for each day. I have a form that collects data several times in the day. I want a report to show a total for each day and subtotals for each column and grand totals. I can add the dates and used a running total to the report but the report will show all the entries made for the day not a single total for the day. (I hope I said the correctly.) This needs to be done for all columns. I'm not sure what I'm doing wrong. I've attached what I have so far.
View 2 Replies View RelatedI have a table -EVENTS that contains the core event data like the date, location and attendance.
Then I have a separate table that links to the event's KEY and is used to store the events results. Player name (pulled from member table), finish position and points. Players are awarded points for where they finish a game. I want those points to be added to The members overall point total.
how I add these points to a total and where do you think I should store the running total? Should it always be calculated in a query or stored in a field?
I have determined the solution to my problem lies outside of normal SQL queries and I need to create a UDF.
Here is the problem. I need to create a running total based on the sum of two fields [PTS_ISSUED] & [PTS_REDUCED] with one restriction. The total can never be less than 0. If it is less than zero, the totals reset with [PTS_ISSUED] as the new starting point.
I've attached an excel spreadsheet. Column"C" contains the formula logic I am trying to replicate into access.
I will be honest, writing the UDF is beyond my current knowledge but once I see it I am able to understand it and implement it.
I believe the solution needs to store the running total into a variable, make the necessary comparisons and determine if its okay to add the [PTS_ISSUED and [PTS_REDUCED] to the stored total of the previous calculations then advance. I just have no clue in how to go about writing it.
This calculation needs to be presented in Access because the results will drive several other functions within the database.
I have a database consisting of two tables. One is "articles" and the other is "tasks". To put it simply, I would like to find how much time the article spends in tasks, but one article can have many tasks, and they often (but not always) overlap. Tasks have a start and end date field.
View 8 Replies View RelatedHigh everyone I've had a look around the FAQ's and other threads but haven't been able to find what I'm looking for.
I have a table that contains two fields, one being 'part number' and the other being 'quantity'. Unfortunately there are multiple duplicate 'part numbers'. I am looking at keeping only one instance of the duplicate 'part numbers' but at the same time I want to add the 'quantities' together to keep a running total.
For example:
Before
Part Number Quantity
a1 1
a2 2
a3 2
a1 1
a2 1
a1 4
a1 1
After
Part Number Quantity
a1 7
a2 3
a3 2
Any help would be greatly appreciated.
Cheers
I have a query, and I want a field that shows the current balance as of that transaction, eg:__________________________________________________ _______|__Transaction ID__|__Type_______|__Amount__|__Balance__||__1______________|__Deposit_____|__£10______|__£1 0_______||__2______________|__Deposit_____|__£30______|__£4 0_______||__3______________|__Withdrawal__|__£15______|__£2 5_______|So far, I have this:SELECT [Transaction ID], [Type], [Amount], (SELECT Sum([Amount]) FROM tblTransactions AS tblTransactions2 WHERE tblTransactions2.[Transaction ID] <= tblTransactions.[Transaction ID]) AS BalanceFROM tblTransactionsWHERE [Account ID]=1;Although this does not look at the 'Type' field; it just adds the amounts; regardless of it being a deposit or withdrawal. I'm really not sure how to add this.Thanks in advance.
View 11 Replies View Relatedhere is the info needed table name is employee time and fields are employee name, date, total hours.
i need a running total until 2000 hours are reached and then i need it reset to 0. also any hours over the 2000 need to be added to the 0 in other words if on a wednesday the employee reaches 2006 then i need to start at 6 instead of 0 otherwise if it is exactly 2000 i need it go to 0. can anyone please help.
thanks and GOD bless,
Mark Lane
Hello, I have 4 input field boxes in a form: "basic hours", "overtime hours", "holiday hours" and "total hours" i would like it so that when the user enters number(s) into the other field(s) the total field will calculate (add togther the other fields). So for example if the user puts "10" in the "basic hours" input field and "5" in the overtime hours" field then the "toal field" will display the number "15". i would like it so that the "total hours" field calculates the total progressively after each number in the other fields is input (ie a running total is displayed). The user will always fill in basic hours but 1 or more of the other fields can be left blank. I think i need to do some VB on the after update procedure for each field entry but not sure what the code is?, any help would be brilliant.
View 7 Replies View Related