Running A Query Based On A Select Record In The Form
Jun 13, 2006
Hi,
I have a query that I would like to run from a form. I have created the button and the query, but want to add in a clause that will use the user selected record / field as the criteria for the query when its run.
how I can have a combo box on a form, and once a value is picked, return a query that displays all the data based on that value. I have tried using sub forms and the after update but I cant seem to figure it out.
i want to be able to create an On Click Event when pushing a command button that will run an Update query to update a record and after it has been updated that specific record will pop up on a Form and be displayed. i know a different way is to run the Update query and then have it displayed in a Select query but i want it to be displayed on a Form instead. is it possible?
I have a form which lets the user enter a contract ID and then a combo box that has a list of reports which run against whichever ID is entered.
What I want to know if I put the ID's in a table if theres a way to allow the user to select multiple ID's in one go and run the report against them the range rather than 1 at time?
I'm thinking about utilising the check/tick boxes would this be possible? or another way?
I am trying to run a query and display the results in a report (the report side of it is childs play and not a problem). The problem I am having is that I have a search form which should allow the user to search any one of 6 fields (text boxes) or a combination of each.
If the user enters something into a field then that search criteria must match. I wanted to have it so if all fields are left blank then it will show all entries in the database (but it isn't, it shows a blank report). I also wanted it to allow partial completion of boxes.
So for instance if I have 5 customers (Jones, Jonson, Jonus, jimjonkins, Janis) and I type "Jon" into the name field then I would like it to show the first 4 records as they all contain "jon" somewhere in their name but its not, its only allowing exact matches.
I currently have '[forms]![Search_Customer]![Search_Name]'.
Hi all, I have a query which populates a form called EditPatientFrm, which asks the user to enter the patient UniqueID in order to pull up the record they want to edit from the TblPatient. However, I want the user to now be able to input just one of three criteria in order to pull up the record to be edited:
UniqueID ChartNumber PatientLastName and PatientFirstName (two fields)
since they may not have the UniqueID readily available to them.
Can anyone show me how to do this? I have tried to find answer to this one under queries and forms- no avail. Sure it's a simple thing...
I don't quite know if I am heading down a blind alley here. I want to filter a form to show a subset of the records via a toggle button. Click again and you go back to the full record set.
The form is based on a query and the filter is to be based on a copy of the query with several criteria and sorts added. This will result in a record set of active projects comprising about 20% of all records (65 out of 253). The sorting sets the record order to match the main management report and so the Planner can update the active records by navigating through the record set rather than having to search for each record using the Find button.
If what I am trying to do is not the way to achieve the desired result, I'd be grateful for any pointers elsewhere.
i have a table that holds Electronic Gift Card details (those plastic store gift voucher cards). it holds all details of every transaction for every card, so the card number, activations, redemptions, dates, times, transaction values etc. are all recorded in my table.
i have attached a small extraction in a spreadsheet.
a single gift card can have multiple transactions against it throughout its lifespan. there are sometimes error transactions, and i need to write a query that finds these error transactions (they are all flagged with a "1" in the [reversal flag] field, so that bit is easy) but then also then the next transaction that occurs on that card. this subsequent transaction will not be flagged with a "1", but is a reversal of the error and will have an "802" flag in the [transaction type] field.
each transaction is date stamped hh:mm:ss, but i don't know how to write a query that will
1) find gift card number that has a reversal code of "1" 2) find next transaction made on that gift card based on transaction time 3) check that subsequent transaction type is "802" 4) select both transactions 5) repeat for entire table
i can't seem to get the desired result just using a straightforward query, and i don't know much (or any!) VBA in access.
I have searched and search and I can't find the answer to this question when I thought it would be simple. Hopefully you can put me out of my misery!
I have a access 2007 split form with a series of search boxes and a query result window. Enter info into one or more of the search boxes, click search and you get the matching results in the query window below. That works fine but I want to work with the results of the query, how can I do this?
I was looking for the user to be able to select a record and then click a command button to open that record in a form. Or in another instance select a record in the result window, have the current from close and have the primary key passed to a another form which I use to open the split form.
I just can't see how to do it but I expect there are several ways. Happy to use VBA but my experience is with Excel VBA so I'm still getting used to the objects.
I have an existing database with multiple tables. Two tables have the same primary key Cab#.
1. When user clicks on the form on the menu form, I want to request the Cab# value from the user. 2. Then I want to get the record from the first table CabData based on the entered Cab#. 3. Then I want to create a new record for the second table Rides with five fields from CabData table inserted into the Rides record. 4. Then I want to display the new Rides record to the user for updating. 5. Then I want to save the new record to the RIDES table.
What is the ACCESS termonolgy to do each step? Are there any special details I should watch for?
I am trying to select the records I want displayed by what category is chosen in the combo box.
Say there are two fields in the combo box: Red / Blue
I want the query to only display the records associated with the Red Category.
If I set the criteria in the query to [Show only Red] and type in Red when the query is run I get blank lines.
Is there an issue when choosing a category from a combo box for the query to be specific on?
My other issue is.... does the problem originate because I am trying to run a query from a table that is being filled in by typing the information into a form? I wouldn't think so, but I am not sure.
I have a list of client stored in a table "Clients". I would like a form to present a user with the next client in the list at the click of a button, but there will be some exceptions:
Some clients will be given priority, and should be moved to the top of the list although they may not be the next logical entry in the table. Priority clients are indicated by a field "Priority" with a Yes/No option set before work begins.
Some clients will have requested a call at a certain time of the day - This time will be stored in a field named timeToCall. The next user to click the button after the time has passed should be given that clients details.
When the end of the list is reached any clients who could not be contacted will be tried again. My table currently has a field "Attempts" to track this, but that may not be needed. Clients who have been dealt with will be removed from the "Clients" table to a "Completed" table.
Whichever record is selected will be flagged as being dealt with so that 2 people don't get the same entry. I may add a new field for this, but right now I plan to use the "attempts" field to control this
I am unsure of the best approach to the above, I'm not very well-versed in Access, but if I were doing this in Excel (as originally requested by my boss) I would do it like this:
Use a form where the "Next" button will use VBA code to first check if there are any priority clients, then check if there are any timed client's ready to call and then move to the next entry that has had 0 contact attempts. Whichever record is the next one will be displayed in the form to the user.
I have a list box that is correctly listing resources from a table (tblResource). I would like to select one of the list box entry and run a query against the tblResource to show the information for that resource in a form. I have tried to use the lstindex with the control (lstResource) in the where clause of a query to accomplish this with no success.
Please except apologies if I sound a bit ignorant with this but I'm complete novice with Access...
Basically I have a table with the fields Name - Date - Location I need to extract info from the table based on the location field.
i.e. return Name if a specified location exists and another specified location does not. This was real pain in itself and in the end I had to run two seperate queries which returned NAmes where each of the chosen locations exist. I've then created an additional query which compares the two sub-queries and iliminates Names that appear in sub query 2.
I do hope this make's sense I'm starting to confuse myself.....
Anyway, my problem is with the date field... I have to specify a date in order to get the correct info as the results may change on a daily basis... i.e. somebody may use both locations one day, but just the one location the next. However the eventual report which I need to generate is based on criteria over the previous 7 days, although if I use this criteria in my query in completely messes up the results.
So, what I was hoping that I could do is somehow automate my query to run 7 times (once for each of the previous 7 days) and then to combine the results of the 7 queries into a single query or report...
Failing that, could anybody think of any simple way of achieving this... or will be a case of having settle for a seperate report for each day?
Any help would be hugely appreciated... once again apologies for the explaination... It porobably makes no sense at all.
I have DB in access 2007. I have a report that is uses a select query to generate the information for the report. It has been working great, But however lately like maybe with in the last month, it has been causeing Access 2007 to crash. I am having the same issue with another DB that uses the same information but that information is imported in. both Databases have worked great up until two months ago. Microsoft states that it is because of the program. I have tried to repair the DB by using the Repair option. I am confused as to why this would be happening. I can create a new report and it seems to work. but I do not want to change all the DB on everyone's computer just for this reason. I also have two buttons on my report that utilize macros to close or print the report.
Table: "Facility Info" Data in the table: "facility", "city", "date", etc. Query: "Q Facility" Report: "R Facility" Form: "Main Form" is where the data is entered that goes into the "Facility Info" table.
In the "Main Form" there is a dropdown box where I can select the "facility".I would like to add a button to this form that opens my report "R Facility". But this report is a collection of all the facilities and I would like it to just report the ones for the facility that I selected from the dropdown box on my "Main Form".
Is it possible to run a query/filter in order to hide/show a field in a record instead of it affecting the entire record.
What I'm trying to do is, in a form the user can enter information about a service call and they can enter a recommendation for the next visit. When they enter a recommendation they are able to select which month the recommendatin should pop up. This Service report get's printed on a monthly basis as a report. Now the recommendation field should only pop up if that particular month which was selected earlier is true. I've tried different methods, but it would affect the entire record as opposed to just one field.
I have a combo named cbogroup. I have a tblGroup with several records (active, non-active, nursery, etc.). One of the records is *ALL*. Using the CboGroup the user can pick any of the records. Howeverr, if they pick the *ALL* record, I want the query to pull up animalID based on all records in the TblGroup. If another record is picked (i.e. nursery), then the query will pull up only animalIDs that are in the 'Nursery'.Can I put a (iff then) in a query in order to differentiate a query based on all group records or a query based on only one record?
I am trying to write a query that looks at a set of parts that are assigned to the same "Asset" number, and takes the sum of all prices for that collection of parts.
I have the query set up to do this without any problem. Where I am stuck is that in the table containing the details of parts, there are three possible prices. What I need it to do is take price c if there is no value in prices b or a, price b if there is no price in price a (otherwise take price a).
I have tried this using the criteria ="price a" = 0 AND "price b" = 0 (for price c) and ="price a" = 0 (for price b criteria). When I run the query I get a "Data type mismatch in query expression" error.
I would like to run a simple select query, where the CRITERIA is based on the user choice. I have a form with a combo box, with a few choices, and a button that will trigger a macro with one query for now. I can store the choice in to a variable e.g. "town", using Microsoft VB code. How can I transfer the variable to the CRITERIA field in the query, so whenever I chose a specific "town", my query will select the records for that specific town. I want to use one query, and I don't want to have to "hard type the criteria in to the cells' query", but I would like to use a variable that can change and will be read it from the user choice through combo box.
Apologies for imposing on you all but I was wondering whether or not you could help me out??
Would you be so kind as to kind as to show me a practical example of how to incorporate a facility into my attached Database which serves to select an equal ratio of my field “SectionHeadings” such that out of the 30 “random” questions that it currently generates it will provides me on completion with the following:
5 From Set1 5 From Set2 5 From Set 3 …..etc etc
It currently generates the 30 questions that I need without a problem; however it routinely selects any number of one particular type, sometimes more from one subject and less of another.
All subjects headings are of equal importance to me and as a consequence would be very grateful if you could look at what I’ve already done and show me what needs to be done in order to achieve my aim.
I hope my request is possible - Any help you could give me would be very much appreciated. Thank you very much.
I have a bound form which is from tblEmployee, I'd like to have a dataset below (like a splitform but not a split as they have limits) so when i search in the box it gives me say all the smiths - i select for example david smith and it displays his information in the form objects above so they can be edited?
Hi All, I hope I can explain what I am trying to achieve.. I have a "Top 1" query (Qry_Avail_StockItem), which selects the next available record in a table. I have a main form (Frm_MasterStock) with a command button "Add Record". If the user clicks the "Add Record" button, I need the form to go to the record that the query has selected.
Is it possible to run a basic select query to pull records based on multiple strings entered by a user?
I have a query with field criteria - Like '*' & [Type In MMDBID:-] & '*'
This allows the user to input one MMDBID and the records are retrieved from the db.
I can also use the OR statement in the same field criteria "AB123" OR "BC123", and all records based on those values are pulled back.
But I cannot get the user to input multiple values and I tried amending the SQL string based on the OR criteria above
SQL statement (Like) is below :
SELECT tblFund.MMDBID, tblFund.[Investment Name], tblCodesLive.[IOE Code], tblCodesLive.[Uptix Code], tblFund.[Red Payment Deadline] FROM (tblFund INNER JOIN tblCodesLive ON tblFund.MMDBID = tblCodesLive.MMDBID) INNER JOIN tblContact ON (tblFund.MMDBID = tblContact.MMDBID) AND (tblCodesLive.MMDBID = tblContact.MMDBID) WHERE (((tblFund.MMDBID) Like '*' & [Type In MMDBID:-] & '*') AND ((tblFund.Editing)=False) AND ((tblFund.Closed_Fund)=False));
The last version of Access I've used was 97 but I'm getting back into it. I've read a couple of things that recommend creating a form based on a query, not a table, especially if a calculated field is involved.
When I create a select query based on 1 table, I can change/add/delete records right in the results of the select query, which will carry over to the form just fine.
However, when I use an additional table and join them in my select query, I can no longer update any of the fields that show in the query result. The link I'm using is just a 1 to 1.
How can I get around this? I'm using the second table just for lookup purposes (use the value of one of the fields in a calculation), but I want to be able to update the fields from table 1 from the form.