I am trying to export my query to an excel file and I get the above error.
Here is my code:
Code:
Private Sub cmdExcel_Click()
DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel12Xml, "queryA", "C:queryA.xlsx"
End Sub
Not sure what the issue is.
hi There
I Have A Database Trying To Convert It To MDE I Get The Following Message
--------------------------------------------------------------------------
This error is usually associated with compiling a large database into an MDE file. Due to the method used to compile the database, a considerable number of TableID references are created for each table. The Microsoft Jet database engine version 4.0 can only create a maximum of 2048 open TableIDs at one time. Exporting a database as an MDE potentially can exceed this limit if the database has a large number of objects (table, macro, form, report, etc).
There is no accurate method to estimate the number of TableIDs the Jet database engine uses during the process of compiling a database as an MDE. However, each VBA module and each form uses one TableID, as a result, if the database has 500 forms, and each form's HasModule property is set to Yes, as many as 1,000 TableIDs are used.
Any Help Please
Thank You In Advance
I have a routine which connects to MySQL database with ADODB connection. This worked in 2003 and 2007 runtime but throws a 430 error on 2010 runtime. It works in full access 2010. Has there been a change of policy to restrict this type of connection in the 2010 runtime? If I use a linked ODBC table instead of ADODB the runtime fails with "Runtime Error". It still works in full access.
View 2 Replies View RelatedGood afternoon all,
I have a macro that I run. In this macro, I've changed the "SetWarnings" to No. This works since I do not get a "Are you sure..." when I do a makeTable query and the table already exists.
However, I do get a type conversion failure error message.
Does someone know how I click Yes on this without any intervention on my part when the macro is running? Would entering keystrokes in the macro work? I don't think that they will since the next command is not called until the previous has executed ... and I'm getting hung up on the dialog box before the make-table command has finished execution.
I've attached the error message text that I'm seeing.
Thank you for your time and help.
I am trying to import an Excel spreadsheet into an Access 2007 database. Each time I import, Access creates a 'type conversion failure' error database.
I set up the first field in my .db to be a TEXT field because the Field will have both numeric and text characters. The field name is [estimate number] with numbers such as 656111 or 65611A being imported. All the fields with the numeric and alphabetical combination (i.e. 65611A) are not being imported (which results in the creation of the error db).
I have Office 2000 Developer installed on my workstation at work and need to create an executable to deploy to other workstations that do not have MS Access. I'm using Access 2000 and the few that have the runtime installed already have Access 97 runtime.
When I execute the Package and Deployment Wizard I click on the checkbox for "Include Access Runtime". When it creates the package, however, the runtime is not included. I have verified that the runtime is on my hard drive. The CAB file is only about 10 Mb - the same size it was before I tried to create an executable that included the runtime module.
Any suggestions on what I am doing wrong? The size of the module created by including the runtime is not a concern at this time. I just need to get this application deployed for a mission-critical analysis task.
I am creating an app that allows the user to locate a 'job' and all the files associated to to it.
Once the user identifies the job, a form is populated with hyperlinks (labels) that point to each file in a single directory which contains all the assocaited files (pdf's and word docs).
The label are being created successfully, but I can't seem to get the label to accept the hyperlink feature.
Here is my code to date. Why are the labels not accepting the hyperlink data?
-----------------------------------------------------------
Const strForm = "Documents"
Dim frm As Form
Dim ctl As Control
DoCmd.OpenForm FormName:=strForm, View:=acDesign
[Code].....
SQL Issue ...
ERROR: Runtime error 3061 - Too few parameters. Expected 1.
------------------------------------------------------------------------
Not sure how to work in the '* ROLL *' into this SQL statement. The query statement works fine ... I have tried different quotation methods ( Not Like " & " '
* ROLL * & ' " & " ) AND .... )
sql = "SELECT DISTINCTROW Sum(CDbl([Scrap Factor])) AS SumOFScrap FROM [RT: Signpro1: Costs] LEFT JOIN [DT: InventoryExtend] ON [RT: Signpro1: Costs].[Part Number] = [DT: InventoryExtend].[Part#] GROUP BY [DT: InventoryExtend].CategoryID, [DT: InventoryExtend].Description, [forms]![signpro sign estima parameters]![combo14] HAVING ((([DT: InventoryExtend].CategoryID)=30) AND (([DT: InventoryExtend].Description) Not Like '* ROLL *') AND (([forms]![signpro sign estima parameters]![combo14])=1));"
ANY HELP WOULD BE APPRECIATED ...
Cheers,
QTNM
Hi there,
I'm using the FILECOPY command to copy a specific file on the C drive to a CD.
I have been testing this for ages and it's been working fine. All of a sudden, I am getting a runtime 75 error. WHY???
Thanks in advance,
Paul.
Hi Everyone
Ive created a database using the file system object that creates folders, moves files from one folder to another, etc.
This works perfectly on my home pc, but when i try to install it on the server at work I get the following error message:-
Runtime Error 429
Active X component can't create object
I've had a look on the net and appears that it only happens on certain computers and I wondered if anyone had any quick fixes that they had come across over the years.
Thanks in anticipation
Kindest regards
Tony
Hi
I am getting Errors: 0,20,91 at the same subroutine
What could be the reason for the error?
Thanks
"Function is not available in expressions in table level validations"
I keep getting this message when trying to update the value of a text box when using the following code
Forms!frmFinanceProposal!Text940 = Me.Text253
Would someone be able to explain what this message means pls!!!
Good morning
I had yesterday off work and have come back to a nightmare.
The database we use doesnt work the way it should anymore.
There is a switchboard which gives us the option to show a booking form...Worked fine until someone did something to it yesterday.
When I click on the command button to load the form I get an error saying that there was a runtime error 2001 " You canceled the previous operation"
How do I fix this??? I so confused.
I have tried opening the form other ways but it appears to be locked and wont open.
Please if someone could share some light!!!!
TIA
Hi
I have this error when on:
DoCmd.GoToRecord acDataForm, "PaycheckTable", acNewRec
Whent I trace with the debugger when the ENTER keyy is pressed event.
If I don't use the debugger I don't see any error.
This problem occurs when I check a specific checkbox and trying to go to a new record (Whith the other checkboxes I don't have a problem).
Another symotom:
When I use the next or new record buttons I don't have any problem.
How can I fix the problem?
Thanks
i am tring to write a find fun and useing the following code but it keep giving me the error 3131
Please help
If Ponumber.Value = "" Then MsgBox "Nothing To Search": Exit Sub
Set db = CurrentDb
Set rstOrder = New ADODB.Recordset
rstOrder.Open "table1", CurrentProject.Connection, adOpenStatic, adLockOptimistic
Set rst = db.OpenRecordset("Select * From " & table1 & " where PoNumber = ") & Trim(Ponumber)
As the topic indicates: what is runtime error 7225?
Thanx for your help
Hello All,
Using Access 2003 and Word 2003 on a WinXp Workstation with all SPs and updates.
The code that I'm using is MS standard (see below) and has never previously given me any problems albeit using Access 2000 and Word 2000.
I've searched the MS knowledge base and googled the error but nothing I find seems to relevant to this situation.
It falls over on the '.Destination = wdSendToNewDocument' line.
Can someone help?
TIA,
Mo
--------Code----------
DoCmd.Hourglass True
If CreateWordObj() Then
With gobjWord
.Visible = True
.Documents.Open "d:screening emplate.doc"
DoEvents
With gobjWord.ActiveDocument.MailMerge
.Destination = wdSendToNewDocument
.SuppressBlankLines = True
.Execute
End With
'.ActiveDocument.PrintPreview
.Visible = True
End With
End If
DoCmd.Hourglass False
Hi,
I created a database for someone at work, with the main point of it being for someone to enter a date in one field, and then 13 weeks from that date, it ticks a box, and then 26 weeks from the date inputted, it ticks another box.
Now, all was working fine, but today she came to me and showed me an error that keeps appearing.
What happens is when she creates a new record on the form, if she doesn't input either a date (so the above formula can work), or the persons name in the appropriate field, a Runtime Error 94 appears, which I think says 'Invalid Use of Null', or something along them lines.
I've looked at the coding, and am a bit stuck (bare in mind I don't know a great deal about coding).
From memory, in the coding, the database looks at the date inputted, then adds 13 or 23 weeks to the date, and ticks when it gets to that point. However, if this date isn't inputted, that is when the run time error appears. I have no idea at all why this happens when the name isn't inputted.
If it's any help at all, the bit that is highlighted in yellow in VB, when I click debug, is as follows:
dStart = Me.txtStartDate
Underneath this it has the formula that adds 13 weeks to that date, and then the same but for 26 weeks.
I'm guessing I need to tell it that when there is nothing inputted in the date field, it doesn't have to do the formula. It doesn't like having nothing in the date field.
Apologies if that makes no sense.
If anyone at all can help, it would be much appreciated.
Cheers
Dan
I have been writing databases for several years now, so I know my way around access pretty good. I have come upon a strange error though. which is confusing me to now end. I wrote a Database on my work machine which has the latest version of MS Access and SP2 for Office. I just tried to send it to another employee for them to test. Now they do not have the full version of MS Access installed on their machine, they only have the runtime version which only runs the Database. The load works fine and the first screen uses ADO to lookup some value and display them in a list box, nothing crazy, everything works fine. Now using this form, when they click a button the info in the list box is used to set the Fields a new Unbound form. And this is where the error happens. The on_load event of the form fails for some reason, and gives a msgbox which says, "Runtime error occured and the App needs to close", but the prog works fine on my machine. I am baffled. The file is a MS Access 2000 format, I tried changing it to MS Access 2002/2003 Format, and when I do that they cannot open the file because it says they do not have thje latest MS Access version. I have no idea what, why the error occurs, any ideas??
View 1 Replies View RelatedI need to know how to mondify the message text of RunTime Error 2113 when the user type invalid value in the date field?
View 2 Replies View RelatedWhy does the following code generate an error. All i want to do is open a recordset which I thought would be straightforward. (novice Programmer, new to access vba). The set statement in the ComboProduct event generates the error.
Option Compare Database
Dim Company As String
Private dbaProposal As DAO.Database
Dim EffectiveDate As Date
Dim Product As String
Private rstProposal As DAO.Recordset
Private Sub ComboProduct_AfterUpdate()
Product = ComboProduct.Value
Set rstProposal = dbsProposal.OpenRecordset("SELECT * FROM Proposals WHERE Proposals.[Group Name]='" & Company & "' AND Proposals.[Effective Date]=#" & EffectiveDate & "# AND Proposals.Product='" & Product & "'")
End Sub
Private Sub Form_Load()
Set dbsProposal = DBEngine.OpenDatabase("Database1.accdb")
End Sub
Hello all!!
That error keeps on appearing in my application and no way to sort it out...
The error is the following:
Runtime error 3734: the database has been placed in state by user 'Admin' on machine ... that prevents it from being opened or blocked.
I tried to sort it out by doing:
set db= opendatabase(database,0)
but still appearing the message.
could i solve it by checking if there is an actual opened connection before starting a new one? and in case that that there is an opened one, close that.
Don't know what else to try!!
Thanks in advance
Hello Access friends,
What is wrong with the following code (modified the module from http://members.iinet.net.au/~allenbrowne/AppInventory.html ):
I Keep getting a runtime error 3061 Too few parameters . Expected 1 on the line highlight below.
I have the reference MS DAO 3.6 selected and I am using access 2000 and calling the module from a command button in a form.
Thanks in advance for taking the time to help me out.
Dim db As DAO.Database 'CurrentDb()
Dim rs As DAO.Recordset 'Various recordsets.
Dim strProduct As String 'vProductID as a string.
Dim strAsOf As String 'vAsOfDate as a string.
Dim strSTDateLast As String 'Last Stock Take Date as a string.
Dim strDateClause As String 'Date clause to use in SQL statement.
Dim strSQL As String 'SQL statement.
Dim lngQtyLast As Long 'Quantity at last transaction.
Dim lngQtyAcq As Long 'Quantity acquired since incoming transaction.
Dim lngQtyUsed As Long 'Quantity used since outgoing transaction.
If Not IsNull(vProductID) Then
'Initialize: Validate and convert parameters.
Set db = CurrentDb()
strProduct = vProductID
If IsDate(vAsOfDate) Then
strAsOf = "#" & Format$(vAsOfDate, "mm/dd/yyyy") & "#"
End If
'Get the last transaction date and quantity for this product.
If Len(strAsOf) > 0 Then
strDateClause = " AND ([TransacDate] <= " & strAsOf & ")"
End If
strSQL = "SELECT TOP 1 [TransacDate], [Quantity] FROM [Transactions] " & _
"WHERE ((ProductID = " & strProduct & ")" & strDateClause & _
") ORDER BY TransacDate DESC;"
Set rs = db.OpenRecordset(strSQL)
With rs
If .RecordCount > 0 Then
strSTDateLast = "#" & Format$(![TransacDate], "mm/dd/yyyy") & "#"
lngQtyLast = Nz(!Quantity, 0)
End If
End With
rs.Close
'Build the Date clause
If Len(strSTDateLast) > 0 Then
If Len(strAsOf) > 0 Then
strDateClause = " Between " & strSTDateLast & " And " & strAsOf
Else
strDateClause = " >= " & strSTDateLast
End If
Else
If Len(strAsOf) > 0 Then
strDateClause = " <= " & strAsOf
Else
strDateClause = vbNullString
End If
End If
'Get the quantity acquired since then.
strSQL = "SELECT Sum([Transactions].[Quantity]) AS QuantityAcq " & _
"FROM [Transactions]" & _
"WHERE (([Transactions].[ProductID] = " & strProduct & ") AND ([Transactions].[TransacType] = 'Incoming')"
If Len(strDateClause) = 0 Then
strSQL = strSQL & ");"
Else
strSQL = strSQL & " AND ([Transactions].[TransacDate] " & strDateClause & "));"
End If
Set rs = db.OpenRecordset(strSQL)
If rs.RecordCount > 0 Then
lngQtyAcq = Nz(rs!QuantityAcq, 0)
End If
rs.Close
'Get the quantity used since then.
strSQL = "SELECT Sum([Transactions].[Quantity]) AS QuantityUsed " & _
"FROM [Transactions]" & _
"WHERE (([Transactions].[ProductID] = " & strProduct & ") AND ([Transactions].[TransacType] = 'Outgoing')"
If Len(strDateClause) = 0 Then
strSQL = strSQL & ");"
Else
strSQL = strSQL & " AND ([Transactions].[TransacDate] " & strDateClause & "));"
End If
Set rs = db.OpenRecordset(strSQL)
If rs.RecordCount > 0 Then
lngQtyUsed = Nz(rs!QuantityUsed, 0)
End If
rs.Close
'Assign the return value
OnHand = lngQtyLast + lngQtyAcq - lngQtyUsed
End If
Set rs = Nothing
Set db = Nothing
Exit Function
End Function
Hai
I am arif.I am a vb programmer.I try to open the recordset but one error coming that is methot 'open' of 'object_recordset' failed.
Private sub cmdcheck_click()
dim rscom as adodb.recordset
s1="select * from class_subj where class='"& trim(lstclass) & "' and section=
'"& trim(lstsection) & "'"
set rscom=new adodb.recordset
rscom.cursorlocation=aduseclient
rscom.open s1,con,adopendynamic,adlockoptimistic
rscom.close
set rscom= Nothing
End sub
Please clear this problem
regards
ARIF
I have an 'add new order' form which opens with all the fields blank and focus set to a combo box. The first thing the user must do is select a contract name or number from an unbound combo box. I then want the form to update and show all the relevant information in the form fields.
In the row source of the combo box I select all 3 fields from the same table (Project_Info). Only the contract number is visible all others are set to 0cm width in combo box properties.
In the afterupdate event I have the following code to set the field to the values from the select query
My code looks like this:
[code]
Private Sub ProjectContractNum_AfterUpdate()
Dim sOrder_idSource As String
Dim rs As Object
ProjectName = ProjectContractNum.Column(1)
proj_status = ProjectContractNum.Column(2)
End Sub
[end code]
My SQL in rowSource looks like this:
SELECT Project_Info.proj_name, Project_Info.proj_contract_no, Project_Info.proj_status FROM Project_Info;
Access tells me that I don't have a join key in my record set.
message reads as follows:-
Run-time error '2147352567 (80020009)':
Cannot add record(s);Join key of table Project_Info' not in record set.
Debug highlights this line:
proj_status = ProjectContractNum.Column(2)
'proj_status' is the name of the text box and the control source.
If I just use just the first 2 fields (project number and project name) these two work!!
What am I doing wrong?
Thx, Kev.
I have a form that contains a field with an On Click event procedure to send the value in that field to a corresponding field on a subform attached to another form. Does that make any sense? The On Click procedure looks like this:
Private Sub FieldNameonCurrentForm_Click()
Forms!frmMainFormName!fsubSubFormName.Form!txtFiel dName = me.FieldNameonCurrentForm
End Sub
I’m not quite sure what I am doing wrong. I am getting the Run-time Error ‘2465’ and it is pointing out that it is unable to find field ‘fsubSubFormName’. I have double (and triple) checked the names and I have not misspelled the names of the form or subform. Did I set up the event incorrectly? Could it be that I am not calling the subform the correct way? Any ideas? .....