I have created single form and 7 different tables. In my form I have a combobox which have different branch names (Table names are as per combobox values). Now what i want to do is whenever I select a branch name from combo box and click on the save command button the particular record should be saved in particular table.
View RepliesI am new to Microsoft Access. I have built two entry forms for product release information. I have a drop box under the label customer for each specific customer. I would like for this form to send the data entered in the form to the customer specific table from the customer names in the drop box. I have tried to research and execute this myself thus have been very unsuccessful.
View 14 Replies View RelatedI have a tabbed form that contains multiple rows of data just like the following: (it's a service checklist for a store where the user makes choices from the combo boxes: e.g. good, fair, poor, etc)
Paint (txtHrs), Action (cboPaintAction), Condition (cboPaintCondition)
Carpet (txtCarpetHrs), Action (cboCarpetAction), Condition (cboCarpetCondition)
Counter (txtCounterHrs), Action (cboCounterAction), Condition (cboCounterCondition)
etc.
Since the combo boxes describe data that relates only to that element I can't put all the data needed into a single table. There are 40 of these rows so does that mean I have to create 40 tables? If so, how do I add the data to them from the form? Any help with this problem would be greatly appreciated!
I have 5 tables that I would like to input data in. It can only be done with a single form. The fields I want to input in have the same names in all 5 tables, for example:
Table 1:
Name
Age
DOB
Table 2:
Name
Age
DOB
Table 3:
Name
Age
DOB
Table 4:
Name
Age
DOB
Table 5:
Name
Age
DOB
Is it possible to input data into all of these fields in each table using one textbox for each field?
Preferably without having to use code but if it cannot be done without it then that would be fine.
I have three tables: Vehicles; Vehicle Reallocated; and Vehicles Retired. I have a form that runs a query to find all the info in the Vehicles tbl that is not "Retired", not visible in the form. I then have the option to toggle to a Reallocated or Retired form. When i toggle to the reallocated form, i have the like fields in that table (ie Van #, Vin, Make etc) pulling the info from the hidden subform with the vehicle query, so i do not need to fill in repeat data. However, when i add a reallocated date and the new clinic that vehicle is for, i get the record ID for the vehicle reallocated table as expected, but when i save none of the data moved over from the query saves in the record?
How to get all the data on the reallocated form to save?
I've created a access database containing multiple tables, theres one main table that will contain all the data compiled.
I then have other tables that contain some matching data but with an additonal column filled in,
I want to be able to pull the data from these other tables into the main table and compile it including merging some data into a single feild.
Effectively this is what the inputs will be:
Code:
Table 1
Ident Number Solution TRN
T0941A1 SLN019149 EFE0008
T0941B1 SLN019149 EFE0008
T0941C1 SLN019149 EFE0008
Code:
Table 2
Ident Number Solution TRN
T0941A1 SLN019149 EFE0167
T0941B1 SLN019149 EFE0167
T0941C1 SLN019149 EFE0167
Code:
Table 3
Ident Number Solution TRN
T0941A1 SLN019149 EFE0188
T0941B1 SLN019149 EFE0188
T0941C1 SLN019149 EFE0188
Then the main table i want to compile the data like this:
Code:
Table 4
Ident Number Solution TRN
T0941A1 SLN019149 EFE0008,TRN0167,EFE0188
T0941B1 SLN019149 EFE0008,TRN0167,EFE0188
T0941C1 SLN019149 EFE0008,TRN0167,EFE0188
i want it to show as 1 line item and compile the TRN numbers into a single feild per row rather than having duplicates.
Sorry for the newbie question but...
I've got a form called 'frmStudent' which is linked to 'tblStudent'. I have designed it as a tabbed form, the first tab has "Student name", "Student Number", etc. The second tab is linked to visits by the student to a mentor (such as a tutor etc). Here I'd like to have "Date of visit", "Mentor Name", etc.
So far I've been able to get the first tab to work (I'm guessing because it's linked to 'tblStudent'), but can't get my 2nd tab to work as I have no clue on how to link it with 'tblVisits'. Is there a VBA methor or perhaps a nother method to do this?
I'm attaching a link to the sample of what I'm doing (please shift-open into frmStudent to view what I'm talking about). Any ideas and suggestions would be greatly appreciated!
DOWNLOAD DATABASE:
http://www.myfilestash.com/userfiles/sabotage1945/Student_Help.zip
Kindest regards,
Sab.
I have a form that no longer saves data in some fields, but does save data in others. Nothing has changed, except that it no longer saves the new data which it did save at one time. I looked at the code behind the form, and the requery statement is still there.
Any suggestions?
My database allows you to log issues (see attached)
An issue will belong to the project, the project may have multiple test plans.
The issue will also be the primary responsibility of a company, and that company may have multiple contacts (people)
Now, i could create a form over the top of each table but then if someone wanted to add a new project, testplans for that project, suppliers (companies) for that project AND new contacts for those companies, they are going to end up going through loads, and loads of forms.
So my question is, what approach would you recommend to create a control panel where they could add these items with the fewest number of page switches possible? (preferably none.
There is a public master database with a bunch of tables and data in it being maintained by another group. My boss wants to skim some information from this, add some of his own information to it, and save it in a completely separate .mdb file on our server.
I've used Access to link to the public database, built a custom table just for us, and built a form. The form uses bound controls on the left side to pull in data from the public database, and unbound controls on the right side for user entry of data. I coded a VBA save button that should save all controls (bound/imported as well as unbound/data entry) to our local table.
The unbound controls save just fine, but the bound controls are missing from the table. A new row is created with no problems, I get no error messages, but half the fields in the table are just blank.
Code:
DoCmd.GoToRecord , , acNewRec
Dim Rs As Recordset
'Dim SDB As Recordset
'Dim strSQL As String
Set Rs = CurrentDb.OpenRecordset("Supervisor Table", dbOpenDynaset)
[Code] .....
i got a form with three normal fields where i add data i then have two auto number fields i.e. SupplierID and PersonID the supplierID works fine, i can add a new record and click save and it will save the data in the suppliers table.The problem is with my PersonID field, i need it to retrieve the data from my subform and firstly display in the field on my main form and secondly, when i click save it should save save the number that is displayed into my Suppliers table.
View 2 Replies View RelatedI have used DateSerial to calculate a future date in Microsoft Access form, but it wont save the calculated date on a table (I need the calculated date on a table so that I can generate a phone list sorted by dates).
I have tried to use the formula (=DateSerial(Year([StartDate]),Month([StartDate]),Day([StartDate])+21) in Defaul Value, without avail, and while the formula works in the Countrol Source, it wont save it to a table because it wont accept the formula and link together, so that I can do a report, or search on it.
If anyone can help I would be so greatful
Thank you
Nic
I want to open an existing record via a form and then edit that data but save the form as a new record. Basically a form used for handover/takeover process where most of the data remains the same but the new form is the basis for the next handover/takeover.
View 6 Replies View RelatedI have some project run on MS-Access as front-end with database linked to MS-SQL Server. I have some column of table contain Date-Time data that store data as General Date format (ie 01/01/2005 08:00:00). I create some form for my staff to key in a data of lab test that they will be key in only time with out date value. On form, I show this value as time only too. But I want to use this data with Date value for some calculate as backgroud process.
So...
In case of new data, Database will be store my data as CurrentDate with Time that my staff key in.
In case of data update, Database will be store my data as ExistDate with Time that my staff may update.
What should I do for solve my problem?
I have some project run on MS-Access as front-end with database linked to MS-SQL Server. I have some column of table contain Date-Time data that store data as General Date format (ie 01/01/2005 08:00:00). I create some form for my staff to key in a data of lab test that they will be key in only time with out date value. On form, I show this value as time only too. But I want to use this data with Date value for some calculate as backgroud process.
So...
In case of new data, Database will be store my data as CurrentDate with Time that my staff key in.
In case of data update, Database will be store my data as ExistDate with Time that my staff may update.
What should I do for solve my problem?
I have a button that when clicked moves a piece of data to a subform. I have put the whole sequence below. The trouble I am having is :
- The event will not happen until the form is saved. I think this is because fkTaskID is a new record (auto) number which hasn't generated yet.
- If I force the form to save it does work but then I get an error on the INSERT command when not all required fields of the form are complete (see sample in second part below).
Is there a way to save the record and maintain the integrity of the form input - and still have this code work?
BUTTON CODE
==========
Private Sub BTNAddReasonRw_Click()
Dim dIndex As Long
DoCmd.SetWarnings False
For dIndex = 0 To Me.LISTReworkReasonsUnselected.ListCount - 1
[Code] ......
What I have is a database setup with multiple tables in which different areas of my DC can input information simultaneously into their respective tables. I then have another database linked to it for myself to have a live view of each updated record. I would like to see all the records of each table in 1 single table (possibly just sorted ascending by time). Each table has the same Field headings but may have different qtys of records. As I will then have it linked to an Excel table to VLOOKUP from it.
I have tried Union coding but always get Syntax Error etc.
I'm using the MS Access 2010 ExportwithFormating action to export three tables to a single MS Excel 2010 workbook. The action overwrites the first excel worksheet each time instead of saving all three worksheets in a single excel workbook.
How can I export three tables into a single excel workbook.
I have a form which contains one subform. On the subform I have a command button which saves the record just entered. On the main form I have a "refresh form data" button which updates the main form so that the calculated controls can show the correct results based on the data just entered?
Can anyone tell me how I can get the "save record" button in the subform to subsequently refresh the data in the main form as well, thus saving a button???
Many thanks.
Peter
I have 3 separate tables with the following fields: Year; Name of School; Emis No. (Primary Key); No. wrote; No. passed; Pass %. These tables were created in Excel and imported in Access.
I would like to do the following (see table below): 1. create a form that would allow me to view all the data per school in datasheet view and also allow me to enter new data annually; 2. create a new table where this information can be stored
.
YEAREMIS NOSCHOOLNO WROTENO PASSEDPASS %2009109964Bhuqwini4012302010109964Bhuqwini6126432011109964Bhuqwini6422342012109964Bhuqwini
I have 3 separate tables with the following fields: Year; Name of School; Emis No. (Primary Key); No. wrote; No. passed; Pass %. These tables were imported from Excel. I would like to do the following: create a form that would allow me to view the all the data per school in datasheet view and also allow me to enter new data annually.
View 2 Replies View RelatedI use the first record of my table as a blank when the form is opened. Users are supposed to use a drop down to navigate to a record for updating. Some users have populated fields into my blank that i've had to go in and delete.
I'm wondering if there is a way to prevent that first record from being edited.
I have a couple of tables which only have a single field. Is it worth adding a second field in order to hold an ID number (is this commonly termed an index number?) for each entry.
My other tables with multiple fields include a field for an ID number and these tables are linked via these fields.
At this stage I cannot see any reason why, in the future, I would want to add additional fields to the tables which I am currently planning to make single field.
Single products night be thinks like 2-inch wheel or 1 inch wheel in a choice of colours, front axle, back axle etc that can be ordered as distinct products
A kit is distinct product in its own right consisting of a bundled set of other single product components.
Question 1: I would quite like to have single products and kits use the same ProductID index but I think Single products and kits need to be on separate tables in order that the product components included in a kit can be defined. So what I would like to happen is that if I open a kit form on my database in order to define a new kit that it would somehow look at the index for the single product table and take the next assigned ProductID. I am not sure of the best design approach with regards to tables and relationships needed to enable this.
Question 2: When associating the single product components of a kit with the kit record it will be necessary to select from the entire list or single product components as all single products are potentially valid kit components. If I were to do this using the tbl_single_products as a lookup table it would be a very long lookup list the user would have to scroll through. Are there any functions or techniques that would allow me to dynamically search a lookup list as the user enters text e.g. The user enters "T" the list pointer goes to entries beginning with "T" the user enters "e" the list pointer goes to lookup list entries beginning in "Te" etc.
Question 3: Is there anyway apart from autonumber to create an automatically incrementing index of your choice for use in tables e.g. PROD001, PROD002 etc...
I need to output my Access Database as one XML File. My issue is I need to have two tables mapped back to one table. When I try to nest them, one table is nested as it should be, but the other one is just added on the end of the file; not nested like I need it to be.
Board Stacks is the upper end Table. Calibration and Station_Captesters needs to be nested inside it. On top of that, I also want to add they lower two tables in series.
Warehouse inventory system in access 2003. I have set up two primary tbls: Equipment and ETO (Equipment transfer order) both have an autofill primary key and the equipmentID is part of the ETO tble. There is a one-to many realationship from the equipment to the ETO. There are other tables (4) in the system but they are used as look-up tables and i'm not concerned about those.
Equipment Table layout: EquipmentID, ModelNumber, SerialNumber, Mfg, ProductName, CurrentLocation, Category. This table is used as the repository for all of the equipment that needs to be tracked and inventoried. It will not change much with except the CurrentLocation changing as the stuff is shipped around (in Store, In Warehouse) and of course when new equipment is being added.
ETO table layout: ETOID, ETONumber, FromStore, ToStore, OriginStore, ETODate, ModelNumber, SerialNumber, MfgID, ProductName, LocationID, CategoryID, EquipmentID. This table will be used (I hope) to basicly track the equipment as it moves from store to store to warehouse and back out again.
Process: Locate a peice of equipment by either SerialNumber or ModelNumber in the Equipment Table, change the location depending on it's status (coming in, going out) then i need to somehow update the ETO table with that ModelNumber, SerialNumber, Mfg, category, etc..But put in the FromStore, Tostore, OriginStore, ETODate, etc..
I have tried both the update query and append query from both tables but I can't get the results i need.