Save SQL To An Existing Query?

May 10, 2006

Hi

Can i save an SQL statement to an existing Query. what i would like to do is have a crosstab on fields that will be determined at runtime. so i would have the pivot on a field that is chosen at runtime. I can run a sub that will generate the correct SQL, i am just lost on how to save it to an existing query.

the full blown explanation of what i am try to do, is the following. i have a report which is going to use a cross tab. so i need to attach a query to the report. if i assign report.recordsource = SQL i get a message that a crosstab can't be attached to the report. but if i use a saved crosstab and i write report.recordsource = me.myCrosstabQry then it works. don't know why, but it does.

thanks in advance for your help,

sam

View Replies


ADVERTISEMENT

Forms :: Save Existing Form Data As New Record

Nov 14, 2014

I want to open an existing record via a form and then edit that data but save the form as a new record. Basically a form used for handover/takeover process where most of the data remains the same but the new form is the basis for the next handover/takeover.

View 6 Replies View Related

Cannot Add Criteria To An Existing Query In SQL

Feb 19, 2007

I currently have a query (see code below) showing me a total count of WorkUnits. I would like to exclude WorkUnits if the PossibleCause field is Out of Stock. When I add criteria to Where in the code I keep getting an invalid bracketing issue and I cannot solve it no matter what I have tried. Any advice on how to add the critieria above to this query correctly?



SELECT 'Total Work Units' AS FaultCategory, Count([WorkUnit]) AS [WU Totals]
FROM [Select Distinct [WorkUnit]
FROM WorkUnitsFaultsMainTBL
WHERE BuildID IN ("E010","C809","F001","C810","F187","A910","M173","M174") AND
[TodaysDate] BETWEEN [Forms]![Queries_ReportsFRM]![StartDateTxt]
AND
[Forms]![Queries_ReportsFRM]![EndDateTxt]]. AS vTbl;

View 7 Replies View Related

Query An Existing Database

Jun 17, 2005

is there anyway to view records in an access database from an existing database? i have 3 databases that perform basically the same things, but are for different people...
i would like to create a database that can report all this information in one spot, instead of creating reports in every database. if this is not possible, i'll probably go the asp.net route, but this seems to be an easier way, if it is possible
what do u think?
*j

View 2 Replies View Related

Modules & VBA :: Save As Dialog Box - Allow User To Save Copy Of Current Database At Desired Location

Feb 12, 2014

So I have this relatively simple problem: I need to create a button that once clicked will open the Save As dialog box and allow the user to save a copy of the current database where he wishes. The filename should contain todays date in DDMM format along with some pre-set text e.g. DDMM PresetText.

I am using Access 2010.

View 2 Replies View Related

Query With Criteria On Two Existing Queries.

Aug 9, 2005

Hi,
I am in need of help to sort out some records. I have tow existing queries I would like to combine and get one final set of records out of. They go like this:

Query 1. (unique #)
Lot Protocol Sample # 1 mth 2 mth 3 mth
X ABC 1 x x (check boxes)
Y ACD 2 x x

Query 2. (unique #)
Lot Protocol Sample # 1 mth 2 mth 3 mth
X ABC 1 8/8/05 9/8/05 10/8/05 (query performs
Y ACD 2 8/8/05 9/8/05 10/8/05 calculations)

What I am looking to retrive through the third query is this:

Query 3. (unique #)
Lot Protocol Sample # 1 mth 2 mth 3 mth
X ABC 1 8/8/05 9/8/05
Y ACD 2 8/8/05 10/8/05

Where the third query only shows the calculated dates when the check box is true. I have tried to go through the expression builder, but to no avail. I either get all records, like query 2 or I get nothing reported. I am not sure how to limit the records based on the check boxes.

Thanks,
CB

View 1 Replies View Related

Tough Modification Of Existing SQL Query

Mar 7, 2007

I’m trying to modify an existing SQL query that calculates actual working days between start date in tblECN and end date in tblECNDetail to do the same between start date in tblECNDetail and end date in tblECNDetail (same table).

Where I’ve gotten into a bind is with the joins of the two tables that are needed in the first query but not in the second as both fields come from the same query.

In the current working query I join about tblECN.ECNID and tblECNDetail.ECNID. In the new query I don’t think I need to create these joins at all as BOMEntryStart and BOMEntryEnd both come from the same table (tblECNDetail). I’ve bolded all references to the table no longer required for join but I don’t know which join statements I can be rid of. When trying to save I get an error in the FROM statement if I leave as is. If I get rid of the join statement I get an error

working query
SELECT [tblECN].[ECNID], [tblECN].[RelDate], [tblECNDetail].[PendDate], DateDiff("d",[tblECN].[RelDate],[tblECNDetail].[PendDate],2)- IIf([HCOUNT]>0,[HCOUNT],0) AS DaysDiff, Int([daysdiff]/7) AS Weeks, [daysdiff]-[weeks]*3+IIf(Weekday([tblECNDetail].[PendDate],2)>5,5-Weekday([tblECNDetail].[PendDate],2),0)+IIf(Weekday([tblECN].[RelDate],2)=6,1,0)-IIf(Weekday([tblECN].[RelDate],2)>Weekday([tblECNDetail].[PendDate],2),2,0)+IIf([tblECN].[RelDate]=[tblECNDetail].[PendDate],1,0) AS weekdays, Query5.HCOUNT
FROM (tblECN INNER JOIN tblECNDetail ON [tblECN].[ECNID] = [tblECNDetail].[ECNID]) LEFT JOIN [SELECT Query4.[tblECN].[ECNID], Sum(Query4.TEMPVAL) AS HCOUNT
FROM (SELECT [tblECN].[ECNID], 1 AS TEMPVAL
FROM tblHoliday, [tblECN] INNER JOIN [tblECNDetail] ON [tblECN].[ECNID] = [tblECNDetail].[ECNID]
WHERE (((tblHoliday.Holiday) Between [tblECN].[RelDate] And [tblECNDetail].[PendDate]))) AS Query4
GROUP BY Query4.[tblECN].[ECNID]]. AS Query5 ON [tblECN].[ECNID] = Query5.[tblECN].[ECNID]
WHERE ((([tblECNDetail].[PendDate]) Between [Forms]![frmDates]![StartDate] And [Forms]![frmDates]![StopDate]) AND (([tblECN].[DoNotProcess])<>"Do Not Process"));


Not working query
SELECT [tblECN].[ECNID], [tblECNDetail]., [tblECNDetail].[BOMEntryEnd], DateDiff("d",[tblECNDetail].[BOMEntryStart],[tblECNDetail].[BOMEntryEnd],2)- IIf([HCOUNT]>0,[HCOUNT],0) AS DaysDiff, Int([daysdiff]/7) AS Weeks, [daysdiff]-[weeks]*3+IIf(Weekday([tblECNDetail].[BOMEntryEnd],2)>5,5-Weekday([tblECNDetail].[BOMEntryEnd],2),0)+IIf(Weekday([tblECNDetail].[BOMEntryStart],2)=6,1,0)-IIf(Weekday([tblECNDetail].[BOMEntryStart],2)>Weekday([tblECNDetail].[BOMEntryEnd],2),2,0)+IIf([tblECNDetail].[BOMEntryStart]=[tblECNDetail].[BOMEntryEnd],1,0) AS weekdays, Query5.HCOUNT
FROM ([b]tblECN INNER JOIN tblECNDetail ON [tblECN].[ECNID] = [tblECNDetail].[ECNID]) LEFT JOIN [SELECT Query4.[tblECN].[ECNID], Sum(Query4.TEMPVAL) AS HCOUNT
FROM (SELECT [tblECN].[ECNID], 1 AS TEMPVAL
FROM tblHoliday, [tblECN] INNER JOIN [tblECNDetail] ON [tblECN].[ECNID] = [tblECNDetail].[ECNID]
WHERE (((tblHoliday.Holiday) Between [tblECNDetail].[BOMEntryStart] And [tblECNDetail].[BOMEntryEnd]))) AS Query4
GROUP BY Query4.[tblECN].[ECNID]]. AS Query5 ON [tblECN].[ECNID] = Query5.[tblECN].[ECNID]
WHERE ((([tblECNDetail].[BOMEntryEnd]) Between [Forms]![frmDates]![StartDate] And [Forms]![frmDates]![StopDate]) AND (([tblECN].[DoNotProcess])<>"Do Not Process"));

Any help is greatly approciated.

View 13 Replies View Related

Modules & VBA :: Save Access Report As PDF And Save To Folder

Jan 10, 2014

I have a few selected reports on an Access 2007 database that users can run. Is there a way for users to view the report, save as a PDF and automatically save a copy to a shared drive by modules/vba coding as an On Click event procedure?

View 4 Replies View Related

Insert Query Result Into An Existing Column

Jun 24, 2005

Hello again.

I've got a query that takes a part number, strips off the un-needed prefixes and suffixes, and gives me just the meat & potatoes of what I need.

I'd like to insert these results into a particular column in an existing table. Say the column name is Part_Number and the table name is CompletedWork. What would the SQL look like for that? I think this is relatively simple but my SQL skills would never be found in the same sentence as 'good'.

TIA for the help. This forum is an incredible source of information.

-Matt

View 11 Replies View Related

Append Query Based On Existing Info

Oct 6, 2005

Wow, seems like this is my favorite place in the world now.

My problem is that I need to append data from one table to another, on the condition that any of the fields in the record have changed since the last time the query ran.

For example,

tblEmployee has the fields 'EmployeeID', 'Name', 'Position', and 'Office'. We are appending to tblEmployeeHistory with the same fields in addition to a field for a date. When executed, the query should append the records where something has changed and attach today's date to them. This enables us to later use another query to call up old information based on the date.

Once again, this is a hypothetical situation and not my actual database. Any solution or comments are welcome.

View 2 Replies View Related

Query Pulling A Column Not Existing In The Table

Nov 6, 2007

Is there a way to specify in the query sql, if column XX exists in a table, pull it, if doesn't exist, create a blank column "XX" ?

View 6 Replies View Related

Reports :: Adding Query To Existing Report?

Mar 15, 2014

Is it possible to add a query to an existing report? I use Access, not VBA.

View 1 Replies View Related

Adding / Removing And Saving Existing Query

Jan 28, 2013

I am in the process of making a database and basically I have everything done but this saving, loading and adding/removing part.

Would it be possible for me to allow end-users to run queries that they could save, load, add to the existing table or remove from the existing table?

When I say Add/Remove what I mean is could a user of the database run a search of every customer in the state and then remove everyone in County X or on the other hand could they run a search of every customer in the state and then add every customer in a neighboring state.

Kinda like layers and again I have all of the criteria set up I just need the Save, Load and Add/Remove buttons on the form. I should add that I do not want users to save over the main table I want them to save it as there own text file they can upload later.

View 14 Replies View Related

Selecting Existing Table Name Using Form's Combobox For A Query

Dec 12, 2006

Folks,
can someone help me on this? I am not sure why the select query inside this procedure is not working. Here is the that routine:

Public Sub temp()
Dim strDocName As String
Dim strTableName As String
Dim strTbl As String
Dim aot As Access.AccessObject
Dim strSQL As String
Dim rpt As Report
Set rpt = CreateReport

strTbl = Forms!frmSearchBoilerGuar!cboTypeOfGuar

For Each aot In CurrentData.AllTables
If aot.Name = "strTbl" Then
strTableName = strTbl
End If

Next aot

strSQL = "SELECT tblProjts1.chrProjectName, tblProjts1.chrBlrPropNum, " & _
"strTablename.memGuranItem , strTableName.memLDs FROM tblProjts1 " & _
"FROM tblProjts1 LEFT JOIN strTableName ON" & _
"tblProjts1.intProjectId = strTableName.intProjectId"

rpt.RecordSource = strSQL
strDocName = "rpt"

DoCmd.OpenReport strDocName, acPreview
End Sub


Basically, I am trying to select a table name from the combobox and then use that table name for my query. Then I want to use that query as a recordsource for my report.

Any help is greatly apprecited.

Shan.

View 2 Replies View Related

Update/Change Existing Data To New Table With Query?

Feb 17, 2008

i'm a Access novice. I have tables with existing data in numerical form, and would like to know how I can use Queries or VBA code to update these values into a new format in a new table. for example the original data might be of race type:

1 - caucasian
2 - african american
3 - hispanic 1
4 - hispanic 2
5 - hispanic 3
6 - other

and i want to regroup these into less types, eg:

1 - caucasian
2 - african american
3 - hispanic
4 - other

how can i achieve this in Access? i know how i can do this conceptually with "if" and "case" statements, but I have no idea how i can do this in Access. I don't want to mess with the original data, so please help with CODE or QUERY examples.

thanks!!

View 4 Replies View Related

Modules & VBA :: Adding Calculated Field To Existing Query

Nov 12, 2014

I am looking for a way to add a calculated field to the end of an existing query using VBA. Is there an easy way to do this?

The data I receive from an external supplier shows monthly data split by column with a new column added in each month. I then need to reflect this by adding a new column to the end of the query. It is currently a manual tweak, but I want to automate this with code.

View 6 Replies View Related

Queries :: Designing A Query To Normalize Existing Database

Dec 6, 2013

I am attempting to normalize an existing database. I've created the table structures necessary and now I'm designing a query that will update the new field in my primary table: "LabelBaseProduct" with the primary key from my new table: "tblBaseProduct" where the old field from my primary table: "tblLabels.BaseProduct" equals the description field from my new table: "tblBaseProduct.BaseProductDesc".

A visual of my tables:

tblLabels (Main table)
- LabelID
- BaseProduct (old field with text data)
- LabelBaseProduct (new field, needs to be updated with PK from tblBaseProduct)

tblBaseProduct (new table)
- BaseProductID (PK and FK to tblLabels)
- BaseProductDesc (Field that should be matched to tblLabels.BaseProduct)

I tried to design a query using design view of the query design and this is what I have:

Code:

UPDATE tblLabels, tblBaseProduct
SET tblLabels.LabelBaseProduct = [baseProductID]
WHERE (((tblLabels.BaseProduct)=[tblBaseProduct].[BaseProductDesc]));

When I attemted to run the query it told me that it was going to updated over a million records. I only have just short of 2k records in my database.

View 4 Replies View Related

Queries :: Writing Formula In Query On Existing Fields

Apr 14, 2015

I have a table linked to SQL Server 2014. As SQL Server 2014 does not support calculated fields I created a query to use formulas. Now I want to write formulas on the existing fields ( TotalMarks ) of table Not to create new fields.

View 1 Replies View Related

Add New Field To Existing Table And Populate New Field With Existing Data

Apr 23, 2014

-Microsoft Access 2010

-Existing Access Database contains tables with 1-2 million records

I would like to add a field[dol] to an existing table[rei]. I need this new field[rei].[dol] to be populated with existing data from another table[main] based on the associated field[main].[account1] or [main].[account2] or [main].[account3].

Table1[main]
...account1
...account2
...account3
...dol

[code]...

In the [main] table. There is always data in [dol]. But there is NOT always data in the [account] fields. Sometimes there is multiple account numbers per [dol] but not always.

Customers will ALWAYS have at least 1 [account] number and [dol]. Some will have multiple [account] numbers and [dol]. Sometimes these [account] numbers are the same in multiple fields[account1] [account2] [account3].I just need to do a lookup or something to find the [account#] and pull in its [dol] from the [main] table and populate it in [rei].[dol].

View 14 Replies View Related

Query From An Existing Query Result

Jun 27, 2005

Hi,

I'm writing a database for a record label. Here is the issue. I need to calculate total number of CD's sold for a specific state, and CD Name. I have a query that asks for the name of the state, and CD Name, it then produces the total number of records from this result. This works fine.

My problem is that I need to use something like a DSUM on the total number of CD Sold for the this given result. I have tried to use the previous query as a Make-Query, and then using the generated table in my next query. However, this has not worked, it just reproduces the old results with out tallying them up into one general record.

Is there anyway to use one query's results in another query.

Your help is greatly appreciated.

View 4 Replies View Related

Modules & VBA :: Link / Export Query To Existing Word Document?

Apr 10, 2014

Like the title says it:

Is it possible to link/export a query to a existing Word document?

I have several Word documents with text, and i want to place the data of a few query's in those documents in a certain place.

Is this possible true vba or another way?

View 4 Replies View Related

Queries :: Append Query To Check For Existing Values And Add Only Those Not Present

Oct 23, 2013

I have a database used to manage teaching assignments (which kid is assigned to which teacher so to speak). I have this relationship defined through three tables, a teacher table, a student table, both with unique ID's. The third table is used to define the assignment. Also, the kid table has an extra GroupID. The group ID is what is used to define. So in the definition table, Teacher 1 is assigned to Group 1, and so on (though their may be 20 kids in group 1). When a new teacher is added to the teacher table, I need it to add it to the corresponding field in the definition table. The groupID is in the table as an Autonumber so that will populate automatically.

I need to appendTeacherID to tblassignment (TeacherassignmentID) and have only one occurrence of the TeacherID. So, if I have teachers 1-8 listed, each assigned to a group# in the tblassignment, and I add Teacher 9, I need it to add Teacher 9's unique ID to the TeacherassignmentID field without adding 1-8 again. I can't figure out how to "check" for ID's 1-9 and add only those I've added to the teacher list that aren't already assigned to a group.

I've tried a few different SQL queries append/select queries but nothing seems to do what I need it to do....

View 1 Replies View Related

Forms - Adding Query As Data Source In Existing Form?

Dec 2, 2012

I am trying to add a query in an existing form. When I click on adding a field, I get an option to show "all tables" for not queries.

View 3 Replies View Related

Using Append Query - Update A Table By Replacing All Existing Information

Dec 6, 2013

Can I use the append query to update a table by replacing all existing information with updated information while at the same time adding all data that isn't currently in the table?

Right now every time I run the Append Query it just adds the same information as a new row instead of replacing the existing row with the updated information.

View 8 Replies View Related

Save Results Of A Query

Oct 18, 2005

I have a form that carrys out some calculations, I know it goes against the rule, but can I save the results of the calculation into a table. When I try to do it at present it puts the rusults into a drop down list in a table. How can I overcome this please?

View 2 Replies View Related

General :: Open Save File Dialog - Select File From Text Box And Save To Selected Location

Aug 8, 2013

I need code for save dialog file ,and select the file from textbox and save it to the selected location.i have only this code and i dont know what else i can do with this because it just opens the save file dialog !

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved