"Save Record" Button In A Subform To Also Refresh The Data In The Main Form
Mar 26, 2005
I have a form which contains one subform. On the subform I have a command button which saves the record just entered. On the main form I have a "refresh form data" button which updates the main form so that the calculated controls can show the correct results based on the data just entered?
Can anyone tell me how I can get the "save record" button in the subform to subsequently refresh the data in the main form as well, thus saving a button???
I have a form called Add New Delegation, i have combo box of Institution names on the main form and a subform for Agreements discussed. with a combo box called agreements. I successfully cascaded the combo boxes so that the agreements discussed on the subform are filtered by their respective institutions on the main form. However i am unable to refresh the list each time a new institution is selected as the Macro will not allow me to requery a control on the mainform from the subform..
I have a main form that has some sub forms on it linked by master child on PK. When I select a new record on the sub forms I want to take a date value from the main form and populate the value into a field in the sub form. How do I do this as I cannot see a new record event on the sub form?
I have a database with a Main Menu Form, containing a Button that loads my main data entry form. When the Button is Clicked portions of the data entry form that is loading shows through the Main Form Background (e.g. portions of the navigation bars, and portions of the boarder on the form that is loading.)
I have a main form where information for a particular part number or job is entered. Should the part number not yet exist, Access will let you know. I have a button within the main form that opens up the Form_EnterPartNumber form which allows you to enter the new part number.
What I would hope to be able to do would be to refresh (requery?) the main form after creating a new part number and closing the Form_EnterPartNumber form..........but, keep the main form on the current record instead of resetting back to record number 1.
What i'm trying to do is add a new record to a subform. The problem is, I couldn't use a subform based on a table in order to achieve this. I needed extended information for it to be useful, so I made the visible part of the subform based on a query instead.I'd like to add a button that adds a new object to the main job. I'd like the adding of that button to call a new form allows you to fill in the information for that object (this called form actually contains 5 subforms to populate all the data of the object). That form works.
What I need is for the button to call the 2nd detailed form AND create the necessary entries in the project/object junction table.The idea as it is now is a button on the main form, but if it was possible to do so via continuous form in a subform, that's doable.
How can I make certain my user enters records on a subform before attempting to save the main form? Right now they can completely ignore the subform before saving the record.The Main form has business address, etc. on it. the subform is bound to a join table that lists the multiple categories, subcategories and sector the business is listed in for a directory.
I already have my fields set to required at the table level in the join table, and have some existing VBA in both my subform (to update edited date) and my form (to validate empty records where a certain condition is met) but that's not the issue...
How do I focus the user to enter a record on the subform to the point where they are forced to enter something and complete the subform before the record is updated.
i have a form with subform in it, and when i press the save button in the main form it saves only the records in it but it wont save the records in the subform
i found on microsoft this code DoCmd.Save acForm, "New Employees Form"
how can i use it to save both the main form and subform together
Form 1 - Data entry for a new project Form 2 - Data entry for a task associated with the project in the Form 1
Button on form 1 that opens Form 2.
What I am trying to do:
Use a combobox on Form Two to choose the Project entered into Form 1, so I can capture the Form1 PK as a FK on Form 2.
Here is the problem:
Refreshing the record on the button click so that the new option entered into Form 1 shows up in the combo box on Form 2.
Full disclosure: I'm not much good at VBA so I have been trying to do this by customizing the button macro. I have tried Refresh, and Requery, but I can't seem to get it to update the list in the combo box.
2 questions:
1. How can I get this accomplished? 2. Is there a better way to get this data into the table than what I am trying to do?
I have a main form and a sub form. Tbhidden and tbpropersave are the text boxes that govern the update procedure. The main form has two text box that i use to prevent the user from modifying the information on the main form without clicking my custom save button. the problem is that the subform should be completed after the information on the main form has been filled in. The Update code i have refuses to allow me to complete the subform without first clicking the save button on the main form. Here is the code. I wana be able to fill in info in the main form, then the sub form then click save. The sub form is a table which relates to the main form table Many to One.
Private Sub Form_BeforeUpdate(Cancel As Integer) On Error GoTo Err_Form_BeforeUpdate
Me.tbhidden.SetFocus
If Me.tbPropersave.Value = "No" Then Beep MsgBox "Please Save This Record!" & vbCrLf & vbLf & "You can not advance to another record until you either 'Save' the changes made to this record or 'Undo' your changes.", vbExclamation, "Save Required" DoCmd.CancelEvent Exit Sub End If
Exit_Form_BeforeUpdate: Exit Sub
Err_Form_BeforeUpdate: If Err = 3020 Then 'Update or CancelUpdate without AddNew or Edit Exit Sub Else MsgBox Err.Number, Err.Description Resume Exit_Form_BeforeUpdate End If
I have been trying to figure out how to make a form refresh after deleting a record in a subform. The code in the combo box that populates the subform works fine. If you select the "Action" of "sign" from the unbound combo box above the subform, it places "Sign" in the the subform and then makes a checkbox on the main form [WillTake] = True.
But when I delete the record by right clicking on the entry, the focus is sent back to the main form so I can refresh the form and thus update the [WillTake] checkbox. I have tried just about everything. I can get the focus to a field on the form, but I cannot figure out how to refresh or requery the form.
The code to transfer focus is on the OnDelete of the subform.
I have two subforms on a "Page"/Tabs. Subform #1 is a continuous form which accepts data about dimensions of a pattern piece. The other subform needs to update its information display each time the last control of the first subform loses focus, because it tells me how much material is required for all pieces of this pattern that are entered.
My first feeble attempt at this was to add the following code to the "Lost Focus" event of the final control on the first subform: Form.Parent.Refresh
This succeeded in forcing the second subform to re-run its calculation.
However, after the recalculation took place, I wasn't able to move to the next record on the first subform. This subform is a continuous form, and I need to be able to add another row of data and then see the second subform change based on the additional information in the first subform.
Hi everyone!! This is my first thread in this forum..Hope to get best from this site ..well i m facing a problem..i have a main form and a subform (which is in datasheet view) . Now i have a button called "close_form" in main form on whose click event i have writen this code :
Private Sub close_form_Click() On Error Resume Next DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70 Me.Controls.Item("fees sub").SetFocus DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70 DoCmd.Close End Sub
1. If i run this form directly from Access and there are no changes i do in the form and click this button then it gets hang after showing error "run time error 2046 ; the command or action undo is not available now " "press End or Debug or help"
2. As i have created a Custom menu, if i run this form from that menu then it does not show any error. But it runs fine for the first time but nothing happens on clicking this button the second time i open the same form ( in same session). What to do ?? Please help .. shikha
When I add a record in the subform and then move to the next record whilst still in the subform, the main form jumps back to its first record? I then have to move back to the right record in the main form to update the next record in the subform.
I want to move to the next record in the subform without affecting the main form.
In Access I have created a button to print a preview prior to printing document it is entitle "NoVeteranMain" which works fine. Except I want it to save my document prior to printing preview how would I do it. If not after I edit it I have to re-save it prior to hitting button which generates print preview.
This is code that is generate upon click
Private Sub NoVet_Click() DoCmd.OpenReport "NoVeteranMain", acViewPreview, , "ClientID = " & Me.ClientID End Sub
I am creating an events database. In my main form, I have all the details of a single event (billing code, fees, customer, support personnel, etc.). Then, I have a subform (form view) that lists each of the other services which share an event ID (this ID comes from a separate, unrelated events management suite). In the subform, I display the most-commonly-edited fields so that they are editable without navigating to a different record.
However, there will be instances where it becomes necessary to navigate to one of the records listed in the subform. I would like to make this a quick process by just clicking on the primary key in the subform, and have the corresponding record appear in the main form.
In my searches I've found a common suggestion to use a DoCmd.OpenForm method where the form opens to that specific record -- in effect filtering by the primary key number. I don't prefer this method because it disables the ability to navigate to other records using the previous, next, find records, (etc.) buttons without closing and re-opening the form.
Is there a way to make the main form 'jump' to a specific record by clicking on a control in the subform, without limiting the ability to navigate in the main form?
I want a user to be able to create a new record in the main form, after they have finished filling in the boxes in a subform by pressing the Enter key, rather than having to click the 'new record' button on the main form.
I reckon I need a 'default button' on the subform but I have no idea what this should do when clicked to create the new record...
I have tried everywhere for a solution to this:mad: Any help is much appreciated.
I have a main form with a subform. The subform shows related records using a match criteria. Each record that shows in the subform also has a unique ID. This unique ID is also shown on the main form record (although not used to link the main and sub forms).
I would like to be able to click on a command button on each of the records in the subform and goto the Main form record. I can't find any threads that deal with this though - sorry!
I have a subform that is populated with records, filtered by two combo boxes on the main form. I would like to be able to double-click on one of the records in the subform and have it populated in the main form for editing.
I have a sub form and a button on the main form that needs to be pressed to refresh the data in the main form after data has been entered into the sub form.
Is it possible to have the main form refresh on exit from the sub form field automatically without having to press the button??
Could i hide the button and run a bit of code that runs the refresh button on the main form on exit from the subform field?
I am trying to create a command button that clears all the records in the Sub form in the CURRENT RECORD OF THE MAIN FORM. I know this sounds a little bit confusing, but I hope you understand!
The main form is: frmOrder2 The subform is: subfrmItemOrder
The fields in the subfrm that has to be cleared are:
I am currently working on a project in access 2010 and I am having a search for record dilemma. I have a main form that has a subform in it under a tab control. I place a search box at the top of the form so that user could select either the ID, the internal case number, and/or the reviewer name in the text boxes to search the record.
I have tried the using the search for record macros and the convert the macros to VBA and possibly write so extra coding for calling the subform into the search but nothing seems to work in getting the search in sync between the main form an the subform. VBA code that will look for same record in both forms.
The reason for the tab control is because depending on the data entered the users switch between mid section data about case and so one set of info goes into one tbl and the other goes into another, but the subform that I am referring to in this question is being generated from the same tbl as the main form.
I have two unbound subforms on an unbound "display form". I managed to link the two subforms by following this method: [URL] This is great and works well enough, however, by design, subform2 will only display records relevant to the very first record on subform1. I need subform2 to be filtered based on ALL of the relevant records being displayed in subform1 not just the first one.
Previously, subform2 was based on a query using subform1's records as criteria, but this gave me the same result.
