Had to reinstall OS system. Upon reinstalling Access 2010, and my data, scroll wheel did not move the screen. Previously, worked in typical fashion. Now, have to use the scroll bar. Just plain old Datasheet view. Cannot seem to find any "setting" for this behavior, e.g., Navigation, or in any of the other options screens. Merely want the scroll wheel to work like it does in any other program, alternative to the bar. Recalled the same thing happened on installing Access to my lap top recently. Scroll wheel didn't work. Then, all of a sudden (i.e., I didn't think that I did anything, such as a setting, to change behavior) it started working as a typical scroll wheel.
I am building a database that I need to have the scroll wheel completely disabled or have it actually scroll the screen when I use it. Because as you already know when in a form it will cycle through the records rather than move down on the page.
in a form i type my information and want go to next rocord, there have a few way for this task like create a button or .... but i want use scroll wheel for go to next rocord, is it possible? if yes how do it?
i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only
happen- scroll wheel stops working in one table- the rest you can scroll in as usual? I know there can be issues with scrolling when you're missing some driver for your mouse, but this happened all of a sudden to just this one table, so I can't imagine that it's the mouse missing any drivers. I did compact/repair, restarted, and also tried repair of office installation. That table still won't allow scrolling unless you move the scroll bar manually first.
I have a main menu that I select things to open. Most of the things I open I open in form view but some I want to open in data sheet view.
Without recoding my menu code is there a way to specify in the form to be opened that it should open in data sheet veiw?
Right now I have the default view as data sheet view in the forms but because my calling code is not specifying any view they default to form view, and again I don't want to edit that code in my main menu.
How can it be that from Design view I can go to data sheet view, but from form view there is no option for data sheet view? On form property sheet "allow data sheet view" is "yes".
Is there a way to prevent a user from switching records on a single page form when he rolls his/her mouse wheel. I have noticed that users accidentally scroll the wheel, and this switches them to the next record.
I need for them to remain at the current record they have chosen, or at the new record they are working on.
On a subform that records notes in datasheet view (columns: Date, Note; sorted in reverse chronological order with newest at the top), is there a way to get the blank new record line to appear at the top? Otherwise, you have to counter-intuitively scroll down below the oldest entry to enter a new line.
We could sort in chronological order, but then the most relevant notes would sometimes be scrolled off the bottom of the form and not seen.
I created a new field as a text box, converted it to Combo box, then the Values are pulled from a query and all that works fine.
I have a form that opens and displays these Fields in a Data Sheet view and the new Combo box doesn't drop down and is flagged as a text box in the property bar but no way to change it??
I need the drop down like the other Category field I have, that works but this one doesn't.
See screen shot.
You can see in the Category field, there is a Drop down, but in Category II there is not, even though this is a drop down field. - BUT in this data sheet view it doesn't show it as a drop down.
I have a main form (tsTimeSheetMain) which contains a sub form (tsTimeSheetDataNewSub) in data sheet view. When I click off one row onto another row in the sub form, it triggers this code:
Forms!tsTimeSheetMain!ProjectMonSum.Requery
i.e. it tries to requery the ProjectMonSum field (on the main form) which is a dsum calculated field. This works fine and updates the ProjectMonSum field (which dsums values from the same datasource as the subform.
However, this seems to put the cursor back to the top left field in the subform (datasheet view), rather than leave it in the field I click on (in the subform).
Why is this happening and what is a decent workaround this issue? I just want to update the calculated dsum field each time you update values in the subform.
When opening an access object (Form, report, table or query) in design mode (Access2013), the speed at which the Property Sheet responds depends on how long it has been since a windows update has taken place. To be more specific, immediately after an update and reconfiguration, the Property Sheet responds almost instantaneously; after a few days it can take several minutes to respond.
A member of the Access User Group that I am associated with has asked a question that I can't answer.
In older versions of Access, when you went from Form Design View to Form View, if the Properties Sheet had been visible, it would be hidden in Form View. Since probably Access 2000, the Properties Sheet remains visible in Form View (if it was opened in Design View). Not a big problem, you say? Well, it is to this person, who is concerned about her users seeing the Properties Sheet and making changes in it.
Anyone know a way to defeat this behavior and hide the Properties Sheet in Form View?
With a form in design view, I click on the DESIGN tab on the ribbon and then under TOOLS, I click on PROPERTY SHEET, whick opens on the form. Now I do that and nothing happens. It is the same with ADD EXISTING FIELDS. Neither one appears. Everything else seems to work ok.
I am working in the design view of a form, the controls properties sheet disappeared-gone and even clicking the properties sheet button it does not come back.
I am using Excel/VBA as a frontend and Access backend. The sheet2 stores the queue name and Queue number. We have to update the sheet1 from column L to column O by looking for the values from the Access table for the date selected from the comboboxes. Now In sheet 2 , it says Queue number and in actual in access table it is the combination of Type & Type1 & Type2. So we have to look for Type & Type1 & Type2 in the table and find out total Batches ,Total Envelopes,Total documents and total pages and then store the values in the ExcelSheet1 from column L to column O.
The following formulas will be used in the select statment:
Total Batches = count(BatchNo) for date selected Total Envelopes=sum(Envelopes) for date selected Total Documents=sum(Cases) for date selected Total Pages=sum(Pages) for date selected
I have a form and in the form is a subform. When I add a record with the following code, the subform detail scrolls in such a way that you can't see the record you just added...only a single blank new record. Can you set the scroll position so that I can see all the previous records including the one I just added?
Private Sub Add_PROJ_RECORD() On Error GoTo Err_Add_Click Me.PROJECT_DATA.Locked = False Me!PROJECT_DATA.SetFocus DoCmd.GoToRecord , , acNewRec Me.PROJECT_DATA.Form.PROJ = PROJ_COMBO Me.PROJECT_DATA.Form.SPEC = SPEC_COMBO Exit Sub
I am working with two forms frmManager and frmMMeasures where based on selection from the combo box of frmManager of the department, position and staff member frmMMeasures is loaded where MUserLoginID and MPositionName is populated based on selection from frmManager. This is what I use to populate the MUserLoginID field for the control source " =[Forms]![frmManagers]![cboStaff] ".
My problem is when I go to the next record on the form those two fields do not change from what was picked up from the form frmManager.
I don't know how to ensure that the correct data is displayed.
In my database I have all my clients information in the [Main] form and all their transactions / debits / etc. in a subform [Transactions] in datasheet view. My question is how can I have the subform automatically scroll down to the last record (or to a new record) so the user doesn't have to scroll down everytime a new client is viewed?
I have a query where I want to see a percentage of executed demos. I currently have Name of the promo (group by), # of demos (group by), Status (criteria = E for executed demos, count) and Percentage: Status/# of demos. Everytime I run this query I get this message: "Data type mismatch in criteria expression." The only data in Status is either a O for open or an E for executed. The E in Status is the only criteria I have in the whole query. If I take the count function off Status, it runs, but does not give the right results. Does anyone know what I am doing wrong?
I always feel as though I'm asking a stupid question but here goes. I am making a database with sub tables and sub forms, and working from "Access 2003 inside out". When I open table properties and enter a subdata sheet name and fill in child and master links everything seems fine until I try to save it. I open the table properties window again and the sub data sheet option has returned to "auto". Am I doing something stupid or is there a bug in my system?