Hi all,
Here is what I am trying to do.
I have a start up form with buttons, I would like to have a button that when clicked it would open a form for the user to put in the “order number” and then click another button that opens the order form to that record only.
Thanks in advance
Jon
why the code below is not functioning properly. When I type in an acronym in the textbox, it keeps saying there is an error "Run-time error '3345': Unkown or invalid field reference 'ABO'." I do have ABO in the field.
The dysfunctional code:
Code:
Private Sub btnFind_Click()
If (TxtFind & vbNullString) = vbNullString Then Exit Sub
Dim rs As DAO.Recordset
Set rs = Me.RecordsetClone
rs.FindFirst "[Acronym] = " & TxtFind
[Code] .....
The red highlighted line is where the debugger leads me to. Something with identifying the field? I would like to enable the search procedure to search throughout the entire records rather than just a specific field. How may I write such a line or two?
i need to create a system that can search data using keyword.so i want to create search button that i will create it at form. currently i have 1 table and in that table i have 10 fields which are project_name, doc_ref_no, doc_title, volume, book_no, author, doc_status, box_barcode, filling_location, doc_availability.
i have create 2 forms, one form for user to add new record and another one is to search record. the user can search by enter project name, doc title, volume and box barcode. for project name and volume, i use combo box and for doc title and box barcode i'm using text box.
i want to create search function that can detect from user keyword and even user did not fill in all the form, the system still can search the record.
I have a database that uses four forms and each form has it's own table and each form has it's own search button to find a specific record within that table. I would like to use one search button that will look at all four tables and bring up the correct record when the request number is entered. Can I link all the tables to perform this or is code required? Can someone send me in the right direction for how to do this? Give me an example of code if it's required?
Thanks for any help I can get.
Laura Edmark
Hello
I have a main form with a search command button in the header. This search facility looks for information in a subform. At the moment I can't seem to get it to work.
Main form called Building
Subform called LineTypeSub
Field its trying to search is called Line
Here's the code I have at the moment.
Private Sub cmdSearchLine_Click()
DoCmd.ShowAllRecords
DoCmd.GoToControl ("Line")
DoCmd.FindRecord Me!SearchLine
Line.SetFocus
SearchLine = Line.Text
SearchLine.SetFocus
strSearch = SearchLine.Text
End Sub
If anyone could help that would be great, thanks.
Hello
I need a button that looks at 2 text field in my form that must be the same as 2 field from my table, and display the information from it. I made an example for explain my problem.
In my example i've 1 table: Users
1 Form: frmZoek
In the form are 2 textboxes and 1 command button:
txt1 (Firstname)
txt2 (date)
Command16 (Search)
Now i want that if you fillin txt1 and txt2 the search button looks up in the table if there is a match, if there is one it dislpay all the information under it.
Sorry for my bad english.
I need some help with a simple function in access.
I am trying to create an application whose purpose is to maintain a database of customer names and addresses. This is contained in a table called tblCustomers.
I have create a from whose purpose is supposed to be to search within the table by zip code and return them to the user via a report. The form is called frmZipLookup and contains a text box called 'zip' and a button called 'GetReport.' 'zip' is where the user inputs the desired zip code, 'getreport' is the button that is supposed to bring up the search results.
Now, at first I created a report called rptCustomers based on the tblCustomers, and I had the button bring up this report, however I was not sure how to limit the report to only the zip code entered on the form.
I created a query called qryZipLookup. I put tblCustomers in this query and dragged down the * field and the zip code field from the table.
I would like to use a sql statement to make this work, but so far none of the statements I have written have produced any results at all.
How can I create a button which will search within the table by the zip code field?
Hi there people, i have created a query that searches through different fields within the database, and on its own works fine, enter some or no data and it will return what you have entered. The problem is i have created a form with text and combi boxes on that i can enter the query parameters into in one place, but i can not get the search button to use this data and filter the query? the query is a subform on the main search form and is refreshed when the search button is pressed but with no filters defined by the text/ combi boxes. can anyone help please?
View 4 Replies View RelatedI have a form within a form and am trying to create a txt box for me to input the information i want from a main form and the search button to display the data in the sub form. I have a combo box which work fine but i don't like it to me its not looking professional.
Any help will be greatly appreciated.
thanks Ed
Hi,
I wish to place a command button next to a specific field which when clicked, launches the search command ready to search records against that field.
I have already tried this and managed to place a button to search - however, this searches every field in every record - I just want to search 1 specific field.
I am a bit new to this, so please be as untechy as possible!
Thanks,
Ritchie.
I have the database and the Data page, but how do I add a search button to the data page to search the database by a certain field? Any help would be appreciated. I would be happy to send you the files if you give me a contact.
Thanks
I havent used access before and need a easy way to seach through 1300 records i have created in a form. Each record has 6 criteria, some with drop down options. I would like to create a button that when you type into a box and click this button it will search all my records and bring up a list of all the records containing the key words searched for.
View 10 Replies View RelatedI have a MS Access database, and I have set up a form for users to input
name, address, ssn and other data. I have command buttons on the form
to print a record, add a record, delete a record and to exit. I tried the
search option, but with 50k records on a netwoek, it was to slow.
Is there a way to have a search on a command button, (Macro?) on
this form to allow our employees to search by name or ssn?
Thanks for your help.
I have a search form from which the user can search by multiple criteria.
Currently users run the search by pressing a button on the form with the mouse, the keyboard enter button just tabs around the form.
My question is can I get the enter button to run the search rather than tab around the form?
If so how?
Thanks.
Larry.
I'm fairly new to Access / VBA and have been trying relentlessly to get a text box / search button on my Access form to pull up a specific record. Although the null command produces the correct error msgBox, it does not show any record if I enter a correct primary key term.
Search button = SearchButton1
Search criteria = SearchText1
Primary key field = UniqueAEVRef
Code:
Private Sub SearchButton1_Click()
If IsNull(SearchField1) = False Then
Me.Recordset.FindFirst "[UniqueAEVRef]='" & SearchField1 & "'"
Me!SearchField1 = Null
If Me.Recordset.NoMatch Then
MsgBox "No record found", vbOKOnly + vbInformation,
Me!SearchField1 = Null
End If
End If
End Sub
putting a search button on a form on my database.
On the navigation buttons at the base of the form there is a search facility where I can type a record id but I would like to get rid of that and search records either by turning the ID field into a searchable box or by adding a button where I can press it and get a search box up.
I have a search button / text field on a form with the following code:
Private Sub SearchButton1_Click()
Code:
Dim rsTemp As Recordset
If IsNull(Me.SearchField1) = False Then
Set rsTemp = Me.RecordsetClone
rsTemp.FindFirst "[CompassRef] = '" & Me.SearchField1 & "'"
If Not rsTemp.NoMatch Then
Me.Bookmark = rsTemp.Bookmark
[Code] .....
Unfortunately it only returns the 'No record found' MsgBox, even if SearchField1 is populated with relevant content.
How to create a search BUTTON to give results on the listbox after a user typing the desired keywords to search.
As of now, the database has "On Change" property that whenever a key is pressed (from time to time; letter per letter) it automatically change. What I want is for the user to finish the word he/she wanted to search then theres a Search BUTTON to press in order to show the results.
Attached is the database...
And also, how to put Reset BUTTON - to reset the search box and ready for the user to type again.
In my database I've encountered a hitch - I've got one form set up to view one person at a time and I've got many records in this database - Is it possible to create a textbox and a button called search that will take me to the record containing this text?
i.e currently im on record abc i type into the text dfe and press search - it will take me to a record that contains that text?
I have the below VBA in a from for it to filter the records below based on the criteria:
Private Sub Search_Click()
Dim strWhere As String
strWhere = IIf(Len(Me.AssignedTo & "") <> 0, "([AssignedTo] Like ""*" & Me.AssignedTo & "*"") AND", "") & _
IIf(Len(Me.OpenedBy & "") <> 0, "([OpenedBy] Like ""*" & Me.OpenedBy & "*"") AND", "") & _
IIf(Len(Me.Status & "") <> 0, "([Status] Like ""*" & Me.Status & "*"") AND", "") & _
[Code] ....
When I click the search button nothing happens, is there something wrong with my code??
I am creating search boxes within that searches customer by lastname, phone number, address and suburb. Will I be able to use one search button for all of them or do they have to be individual buttons?
View 4 Replies View RelatedHow can I put search button on the navigation form to search all form in my database? I have eight form I would like to be able to search to be able to pull all information for one student worker.
View 14 Replies View RelatedI am currently the administrator of a fairly large network and am trying to keep inventory of all my domain assets. I would like to be able to search for these assets by a number of different ways such as computer name, location name (ie: CEO office, accounts receiveable, or human resources), slot number on my switches (I would like to know whats connected to where), and also what switch it is located on. Right now I am using a combo box to populate these fields but would like to implement a search function instead to be able to search with whatever information I have.
View 1 Replies View RelatedSo I'm not new to Access but I am to 2010. It has been a bit "challenging". Here's my first question:
1.) I'm trying to search on a field by using a command button. I basically want to click the button and the following message pops up: Enter MRN.
2.) When the MRN is entered, I would like the form to filter on all records that have this MRN.
3.) In old versions of Access, I would create a Macro for this and then call the Macro in the form.
4.) I've tried the FindRecord action in the Macro but it does not work. I actually came across several actions that don't seem to be working properly (getting error messages).
5.) In my head, this should be one of the EASIEST things to do. I've done this before in several different databases. I will admit it has been a few years since I have used Access for this (ie. building forms, macros etc.). I've primarly used it to pull in a data set and then run some queries to get the data I need quickly versus using Excel.
I'm building an application to record engineer input in Events (jobs) for an engineering company.
My main tables are Products, Builds and Events, together with fifty or so reference and ancillary tables which aren't really relevant to this particular head-scratcher.
A Build is derived from a Product and an Event is applied to a Build. An Event includes a sale, a service, a warranty repair and so on. Over time, multiple Events will be logged against a Build.
I have a searchable Events form (Search_Events), containing a subform (Search_Events_sub) whose contents dynamically change to reflect data entered in a variety of unbound fields in the main Events search form. Needless to say, the glue that holds things together is the Event_ID field.
On my Search_Events form, I'd like to place two buttons (Rpt_Event_client and Rpt_Event_internal) which will allow the user to print either a client or an internal copy of the event in question. The reason I want to use separate buttons rather than one button for both copies is that it's quite likely that different engineers will work on different parts of an Event's build, test and sign off process, and will want to print off and annotate the internal report, whereas only the final report will be sent to the client. Also, there will be some slight differences between the visible fields on each report (time and materials logged etc).
So far, I've managed to get the Rpt_Event_internal button to open the relevant Event report in preview mode, using the following on the button's 'on click' event:
DoCmd.OpenReport "Rpt_Event_internal", acViewPreview, "", "[Event_ID]=[Forms]![Search_Events]![Sub].[Form]![s_Event_ID]", acWindowNormal, ""
(In the subform, Event_ID is referenced as s_Event_ID because I'm using an nZ function in most of the search fields so that the results filter dynamically)
So far, so good: this works fine. However, from a usability perspective, and based on the fact that this will be the most-used feature, I'd really like to be able to have the button do the following:
- print the relevant report, based on Event_ID as above to a PDF file
- synthesise the filename of the report along the lines of "Event_" & [Event_ID] & "_Client_Copy_" & [Date()] & ".pdf"
- and to then have the standard 'save as' Windows location browser/file explorer dialogue box appear so the user can choose where to save the file. I don't want the filepath to be hardwired, rather I need the users to be able to decide where to save the file.
I'm using Access 2013.
I am new to MS Access! I have design a database and a form to record the information of customer feedback.
The first thing I want is to search the record from the whole database. Secondly I want to print that searched record. And finally I want to make a Form Reset Button.
I have made a "Clear" button but it is not working correctly and removes the record from the database after saving.
I have attached the database!