Search Button For Specific Field

Mar 3, 2008

Hi,

I wish to place a command button next to a specific field which when clicked, launches the search command ready to search records against that field.

I have already tried this and managed to place a button to search - however, this searches every field in every record - I just want to search 1 specific field.

I am a bit new to this, so please be as untechy as possible!

Thanks,
Ritchie.

View Replies


ADVERTISEMENT

Forms :: Search Button On A Bound Form On Specific Field

Mar 20, 2013

So I'm not new to Access but I am to 2010. It has been a bit "challenging". Here's my first question:

1.) I'm trying to search on a field by using a command button. I basically want to click the button and the following message pops up: Enter MRN.

2.) When the MRN is entered, I would like the form to filter on all records that have this MRN.

3.) In old versions of Access, I would create a Macro for this and then call the Macro in the form.

4.) I've tried the FindRecord action in the Macro but it does not work. I actually came across several actions that don't seem to be working properly (getting error messages).

5.) In my head, this should be one of the EASIEST things to do. I've done this before in several different databases. I will admit it has been a few years since I have used Access for this (ie. building forms, macros etc.). I've primarly used it to pull in a data set and then run some queries to get the data I need quickly versus using Excel.

View 5 Replies View Related

Forms :: Search For And Upload A File To Specific Location Using A Command Button

Jan 11, 2015

I would like to create a form that allows me to search for a folder on my desk top, then once located i can transfer that file to a specific location on another drive, Similar to the Browse / upload function you see on many applications.I am using Access 2003. Is this possible??

View 5 Replies View Related

How To Create A Specific Search Page And Connect A Text Box To A Command Button

Mar 19, 2012

I haven't used access before and have been set the task to create a data of photos. The table is called 'Find a Photo' and contains 6 catergories of various information including river, site and date. I would like to create a search/command button by which i can type the river, site and date into seperate text boxes and search all of them at the same time.I don't know how to connect a command button to command button and not sure if any macros/queries are needed. Hope all this aint to hard to do.

View 1 Replies View Related

Search For Specific Characters In A Text Field

May 25, 2005

I have a table with a large text field in it, among other fields.
What I am trying to do, in a query, is to show only the characters that are between brackets "[" and "]" for that field. And, if there is more than one pair of brackets, show only what lies between the last pair of brackets.

What I've tried so far is use InStr() functions to find these brackets and then use a Mid() function to show the enclosed text. But, it doesn't work well and it gives me a very complex query! In fact, I don't think it is a good idea to even use these functions in my query. That would probably slow it down a lot.

Can someone show me a function that I could use to do what I'm looking for? I need function names that could help me make better searches for more informations.

Thank you!

View 2 Replies View Related

Modules & VBA :: Search CSV To Find Specific Statement / Text On Specific Line?

Jul 8, 2015

how to read a specific line in a CSV file (using VBA), to see if the phrase "There are no records available." is present.

If it is present, then I'm going to do a debug.print stating that there are no records to load - and then the script will move on to the next file. If the phrase isn't present, then I'm going to upload the file to Access, parse the information, and then upload it to a CRM. (I already have the latter portion of the code up and running....I just need to account for the first part, where I can determine if the file has data or not).

The structure of the file never changes. The first row is composed of eight column headers (Post Date, Card Number, Card Type, Auth Date, Batch Date, Reference Number, Reason, Amount) and (if) the phrase "There are no records available." is present, it will show up on the second row, in the first column (under Post Date).

View 3 Replies View Related

Modules & VBA :: Search Button With Text Field

Jun 19, 2014

I'm fairly new to Access / VBA and have been trying relentlessly to get a text box / search button on my Access form to pull up a specific record. Although the null command produces the correct error msgBox, it does not show any record if I enter a correct primary key term.

Search button = SearchButton1
Search criteria = SearchText1
Primary key field = UniqueAEVRef

Code:
Private Sub SearchButton1_Click()
If IsNull(SearchField1) = False Then
Me.Recordset.FindFirst "[UniqueAEVRef]='" & SearchField1 & "'"
Me!SearchField1 = Null
If Me.Recordset.NoMatch Then
MsgBox "No record found", vbOKOnly + vbInformation,
Me!SearchField1 = Null
End If
End If
End Sub

View 5 Replies View Related

Button For Sending A Specific Row Of Information To A Specific Email Address?

Oct 8, 2015

I am trying to figure out how to make a button that sends an email to a specific email address, containing the information from 1 row.

we have rows where we put the the address, the quantity and the time interval we can collect the packages in. these information have to be send to a trucking company. I want access to send an email to the trucking company's email address, and not a whole report of all the rows, but be able to choose to send row 1,2,3 etc.

View 1 Replies View Related

VBA - Search Button To Search Entire Records / Runtime Error 3345

Jun 18, 2014

why the code below is not functioning properly. When I type in an acronym in the textbox, it keeps saying there is an error "Run-time error '3345': Unkown or invalid field reference 'ABO'." I do have ABO in the field.

The dysfunctional code:

Code:
Private Sub btnFind_Click()
If (TxtFind & vbNullString) = vbNullString Then Exit Sub
Dim rs As DAO.Recordset
Set rs = Me.RecordsetClone
rs.FindFirst "[Acronym] = " & TxtFind

[Code] .....

The red highlighted line is where the debugger leads me to. Something with identifying the field? I would like to enable the search procedure to search throughout the entire records rather than just a specific field. How may I write such a line or two?

View 5 Replies View Related

How To Create Search Button Using Access 2007 That Can Search From Form

Jul 10, 2012

i need to create a system that can search data using keyword.so i want to create search button that i will create it at form. currently i have 1 table and in that table i have 10 fields which are project_name, doc_ref_no, doc_title, volume, book_no, author, doc_status, box_barcode, filling_location, doc_availability.

i have create 2 forms, one form for user to add new record and another one is to search record. the user can search by enter project name, doc title, volume and box barcode. for project name and volume, i use combo box and for doc title and box barcode i'm using text box.

i want to create search function that can detect from user keyword and even user did not fill in all the form, the system still can search the record.

View 5 Replies View Related

Using One Search Button To Search 4 Tables In A Database?

Mar 10, 2008

I have a database that uses four forms and each form has it's own table and each form has it's own search button to find a specific record within that table. I would like to use one search button that will look at all four tables and bring up the correct record when the request number is entered. Can I link all the tables to perform this or is code required? Can someone send me in the right direction for how to do this? Give me an example of code if it's required?
Thanks for any help I can get.

Laura Edmark

View 7 Replies View Related

Search Button To Search Subform

Sep 9, 2005

Hello

I have a main form with a search command button in the header. This search facility looks for information in a subform. At the moment I can't seem to get it to work.

Main form called Building
Subform called LineTypeSub
Field its trying to search is called Line

Here's the code I have at the moment.

Private Sub cmdSearchLine_Click()

DoCmd.ShowAllRecords
DoCmd.GoToControl ("Line")
DoCmd.FindRecord Me!SearchLine

Line.SetFocus
SearchLine = Line.Text
SearchLine.SetFocus
strSearch = SearchLine.Text
End Sub

If anyone could help that would be great, thanks.

View 1 Replies View Related

Locking A Specific Field Of A Specific Record

Oct 3, 2005

Hello, I have just spent ages doing searches and reading everything I can on locking. But, I have yet to find an answer as to how I can lock a specific field in a specific record.

e.g. Staff enter customer details, then at the end of the day the admin (me) checks it over and presses a big old button that stops them from locking certain fields in the current record only - they must still have access to the unlocked fields of the current record, and it must not lock any other records.

I'm guessing there's some VB code in the form of fieldname.lock = true, but then it locks the field throughout the whole table!

Can anyone tell me how to do this please?

View 11 Replies View Related

Cannot Search For Specific Date

Feb 22, 2006

Hi,
Can anyone help. I am trying to search an access database for entries for a specific date i.e 26/02/2006

The below works fine, but how do i search for all entries for a specific date i.e 26/02/2006


sSQL="SELECT * FROM tavern_tbl ORDER By ReturnDate ASC, ReturnTime ASC"


Table name is tavern_tbl
ReturnDate / ReturnTime are column names

Any help would be appreciated.

View 3 Replies View Related

Search For Queries That Use Specific Criteria

Jun 6, 2005

Hi,

Is there a way to search for queries that use specific criteria?
Let's say I have 60 queries in total, but only 35 of them use the "Province" field as criteria. The criteria is set to retrieve all records that are in Province AB, SK, ON.

Suddenly we need to also include Province MB to all of these 35 queries.
Is there a way to identify these 35 queries (all the queries use criteria in the "Province" field). These are the queries that would need to be modified to include "MB" as part of the criteria.

I hope my explanation is clear.
Thanks upfront for any suggestions!

BJS

View 4 Replies View Related

Forms :: Control To Search Table For Specific Record?

Aug 11, 2015

I have a form that has a control to search the table for a specific record See code below that is on the AfterUpdate event of a Combo Box

Code:
Set rs = Me.Recordset.Clone
rs.FindFirst "[ClientID] = " & Str(Nz(Me![cboName], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark

[Code]....

What I need to know is how to make the rowsource based on the filter and not the table.

View 4 Replies View Related

Forms :: How To Clear Up A Specific Error On Search Form

Jan 7, 2015

I have a search form that's slightly modified search form modeled after the one available here on this site. It's a main form with a list box. I use the listbox to narrow down the results I want from the search function.

The search details are shown in a sub form that contains sub-sub forms

As seen in the code below, I am using the listbox to set a filter on the subform . Works famously until I search for something that does not exist in the database. I then receive runtime error 3075.

I believe it's related to the way I'm showing the details in the subform (by enabling a filter). If there is no record in the database that match the search criteria, I don't want any error messages or pop-ups and preferably would like the listbox to be blank.

Attached a screenshot of my form.
red = main form
green = subform
blue = sub-subforms
tan = obscuring the search results

Code:
Private Sub SearchFor_Change()
Dim vSearchString As String
vSearchString = SearchFor.Tex
SrchText.Value = vSearchString
Me.SearchResults.Requery

[Code] .....

View 2 Replies View Related

Forms :: Search Text Box For Specific Word - Find Option

Sep 18, 2013

I have 5 textboxes and a multiline textbox in a form in my Access Database. I am going to type several keywords in those textboxes and I am going to type an article in the multiline textbox.

What I need to do is I want to calculate the keyword density in the article. I can do that if i know how to search the whole text in the article and count the specific word. And I want a function to count all the words in the article too.

View 1 Replies View Related

Command Button To Open Specific Record

Oct 6, 2004

Hi All,

I have a form called "frmProducts" which is linking to table "tblproducts".

Easy Enough...

The form shows all the Products information (fields).
I have a "More Info" command button (cmdMoreInfo) next to every record in the form.

When the command button is clicked I would like it to open up another form "frmMoreInfo".
But On frmMoreInfo I would only like it to show that specific product.

I have tried the following code on the on click event on the command button but it was always asking me for the value of Form![frmMoreInfo]![txtInternalCode]

Code:Private Sub Command12_Click()On Error GoTo Err_Command12_ClickDim stDocName As StringDim stLinkCriteria As StringstDocName = "frmMoreInfo" stLinkCriteria = "Form![frmMoreInfo]![txtInternalCode]=" & Me![txtInternalCode]DoCmd.OpenForm stDocName, , , stLinkCriteriaExit_Command12_Click:Exit SubErr_Command12_Click:MsgBox Err.DescriptionResume Exit_Command12_Click End Sub

Any Ideas?

View 4 Replies View Related

Opening Specific Invoice From Command Button?

Jul 20, 2014

I am trying to create a command button that sits on the order details page and that will open up a report i have created called 'picklist' which is basically the same as an invoice but with some different product information listed on it.

I want the command button to open up the picklist that corresponds to the order that i am on e.g picklist #2 for invoice#2

1) I have seen this code on the internet -

DoCmd.OpenForm "SecondFormName", , , "FieldName = #" & Me.ControlName & "#"

Would this work for me if i was to modidy it to:

DoCmd.OpenForm "PickList", , , "InvoiceID = #" & Me.[txtID] & "#"

2) Where do i input this code? If i click on the 'onclick' in the properties form im presented with this page (attachment):

View 6 Replies View Related

Forms :: Using Calendar To Control A Test Box - Click Search For Specific Date

Jul 2, 2013

I am trying to allow a calendar to search through a text box with a large amount of data in which will have headings using the date so i wanted to use a calendar search. Hopefully this will be be like the find function in word where you type (or in this case select a date) then click search or next which will take you to that specific date.

View 14 Replies View Related

Forms :: How To Open A Specific File Using Search Function In Access 2003

Dec 5, 2014

I have a access 2003 database, and i am wondering if i can't setup a search function in a form that will open a file in windows explorer?

What i would like to do is have a test box that i enter in a number for example: 1234 then have a button named "Search" hit that button and it opens a corresponding file in windows explorer named 1234, or just opens that folder directly..

View 14 Replies View Related

General :: Opening Specific Invoice From Command Button

Jul 20, 2014

How to modify an existing database template to meet my needs.

I am trying to create a command button that sits on the order details page and that will open up a report i have created called 'picklist' which is basically the same as an invoice but with some different product information listed on it.

I want the command button to open up the picklist that corresponds to the order that i am on e.g picklist #2 for invoice#2

I have 2 issues/questions:

1) I have seen this code on the internet -

DoCmd.OpenForm "SecondFormName", , , "FieldName = #" & Me.ControlName & "#"

Would this work for me if i was to modidy it to:

DoCmd.OpenForm "PickList", , , "InvoiceID = #" & Me.[txtID] & "#"

2) Where do i input this code? If i click on the 'onclick' in the properties form I am presented with this page (attachment):

View 8 Replies View Related

Using Subform For Search Criteria And Relating One Search Field To Several Columns

Apr 21, 2015

1. I created a form with some search-fields which are related to a query. Then I added a Subform in which I put some more Search criteria (So that I can easily hide and unhide those additional searchfields). It sounds strange but is necessary ;-). Now I related those searchfields in the subform to the same query. When I run that query a window pops up that I should put in a value in all those searchfields which are in the subform. But I told Access that it should display all rows, if there is no value in those searchfields. Just as I did it with the Searchcriteria in the Main form. Do I have to do something special, when I have a query which is related to two Forms?

2. I want a searchfield to search in three different columns. Usually the value will just be found in one of those columns. As the Table I search is very long and has many searchfields and multiple of those will relate to more than one column, is there an easy way to do it in VBA? As I did it by using the "or" field when designing a query, but this seems very slow and unstable.

View 6 Replies View Related

Queries :: Task Completion Database - Search Records With Specific Expiry Date

Nov 17, 2014

I have a task completion database. Each record of model consists of an expiry date. I need to review and update the records before the expiry date. Each model may have more than one record as I have updated the models a couple of times. I would like to select all of records with the expiry date less than 30 days so I can plan to review and update them on time. How to select all these records.

View 2 Replies View Related

Modules & VBA :: Button To Export All Records In Database In Specific Month

Nov 6, 2014

I am trying to create a button on an access form that will prompt the user to enter a search month and then export to excel all records in that database that match that month.

So, if the user prompt "what month" is October, then THE 30 records in the field [receivedate] that are in october (10/XX/XXXX) are exported to excel.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved