I'm trying to incorporate a combo box in my form to navigate through records. The plan is to select a piece of equipment listed in the combobox, and that record will then be displayed as an "after update" action.
However, I have tried through coding I have tried before and utilising the wizard to create this combo-box, but each time I get a "Complie Error - Can't find project or library".
The section of code is shown below:
Private Sub Combo227_AfterUpdate()
' Find the record that matches the control.
Dim rs As Object
Set rs = Me.Recordset.Clone
rs.FindFirst "[EquipmentID] = " & Str(Nz(Me![Combo227], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark
End Sub
I have a search combo box to search for a field on my form. But it just goes to that particular record. The combo box is for client id and it has more than one record. How can I have it return just the records pertaining to the client id choosen in the combo box.
I have a database with over 100k records and I want to use a combo box to search for records by typing in the name. I found code to do this at: [URL] .....
This is working, however i have many fields on the form that I want to populate from the table after the search. Right now only the 3 fields from my rowsource combo box populate.
In my select statement do I need to SELECT * (all) and then populate the fields that way, or is there a way to populate from the table based on the ID of the record that is found?
I have a DB of books and a form to search for multiple fields including ranking (combo box). The way I have it now is to pick "3 stars", "4 stars", "5 stars". What I want to do is have it so that if I pick "4+", it will show all records that have 4 stars and 5 stars and "3+", it will show records with 3, 4, 5 stars.
I have a db which has a field called site_id it a table called sites. I have a form called sites which uses this table as a record source. I would like to make a combo box on the form as a drop down whenever the user selects a new site id it will take them to that ID on my form. I saw where you can do this with the wizard when your add the combo box to the form but it says I need to use a different table or query. Any one know how to use a combo box like this? Thanks..
I have a combo box that searches for surnames in my database. if there are two surnames the same, it brings up the first one. if this is not what i want then how can I ask it to search again instead of just pulling down the list and searching manually?
I have a search form with unbound combo boxes that uses the combo box values as criteria for a query. The Row Source of cboCategory is based on the query:
SELECT Categories.ID, Categories.Category FROM Categories ORDER BY Categories.Category;
When I start the form and I don't select a value for the cboCategory combo box, the query just returns all the values. This is great. The problem is that if I make a selection in the combo box, I have no way of reverting it back to that initial value that would make the query return all categories - if I erase the combo box the query returns nothing. So I have to close the form and reopen it.
I tried adding an "All" value to the combobox like so:
SELECT Categories.ID, Categories.Category FROM Categories UNION Select Null as AllChoice , "(All)" as Bogus From Categories ORDER BY Categories.Category;
but it does not seem to work. It just returns nothing instead of all the categories. How can I add a value of "All" to the combo box that will return all of the categories?
I have seen a few articles here and there on using a combo box to filter records in a sub-form and to filter records in another combo box, but I am not getting anywhere. I hope someone can belp
Exercise 1
For this exercise, I have the following tables:
tblClients containing client names tblProjects containing some project details
I want to set up a simple form, so that the user can select a client name from a combo box on the main form which filters the project detail records in the Projects sub-form. Once the user enters project details, I want this info as well as the selected ClientID to be fed back to tblProjects.
Exercise 2
I have the following tables:
tblProjects as above tblWorkstream containiig names of workstreams and some other details.
Every project has one or more workstreams
I have a form where users will enter hours worked on each workstream. They will first select Project from a combo box on the main form. This should then filter records to be displayed in the Workstream Combo box, before they can then enter hours.
Please let me know if you need me to explain any part of this better.
Thanks in advance.
ps. I am a novice, so I'm hoping to do the above using default MS stuff, not with complex programming!!!
I recently created a database to be used to store incoming invoices. We have 4 suppliers which supply the same material and wanted each supplier to have its own database.
I began by making a database which included all the key tables, forms, queries and functions I would need to then save 4 copies, one for each supplier. This just meant I would not have to repeat the process for each individual supplier.
The problem is all my data is external and upon importing it into the database it has made the search function (combo box) not return results.
I believe this is because: 1) The form was created before the records existed 2) The records were imported from an external source and not created using the form.
However, the way I have designed the form is so I can see all relevant information linked with a specific invoice. This aids in gathering information quickly about an invoice but also so I can input credit note and invoice query information linked to a specific invoice on the same page.
Is there anyway to remedy this?
Or use a similar search function that returns records in my form "Main View"
The last thing I want to do is have to create the form again, although I don't think this will work either as reason 2) states.
I have added a combobox to one of the forms in my customer database using the "find a record in my form based on a value in my combobox" section of the combobox wizard.I have a number of columns in the combobox (the primary key is the bound value, and I have unbound columns for first name, surname etc).
I sorted the records in the combobox by column 3 (surname) so I can scroll through the list and choose surname instead of having to memorise customer numbers. Now I have more than 1500 records (with more on the way), scrolling through takes ages, and I was wondering if there is a way to adapt the combobox so I can (for example) type the first letter of a surname into the box and be taken to surnames beginning with that letter, whilst retaining the primary key as my bound column?
My initial thought was to base the combobox values on a query, and make the query prompt for a starting letter (or string of letters) each time it runs, so it only displays the query results in the list, but I was wondering if there is a neater way to do it?
I have created a combo box which lists companys, when i click on a certain company it brings all records for that company but underneath the last record it shows all the other records on the form.
How do i get it to only show the records for that company only.
I'm trying to create a combo list box in a form that has all 12 months (January, February......etc,) listed in rows, and depending on the selection will bring up only that particular month within a range of dates from a table. I don't want it to look at the day or the year, but only the month.
Example: I select January from the drop down list in my combo box and my form will display all records with dates that are in January regardless of month or year.
Hello Friends, I had a problem with my database although the problem is very easy because I am out of touch I am not able to solve it. I am attaching my databases along with this thread. I want that if the user enter First, Last or Inumber in a text field in the Form "search". After pressing the button ‘search’ a the form ‘search_results’ opens and displays all data records that match to the entered parameters. By clicking on the data record the form ‘candidate’ opens with this specific record and the form ‘search_results’ is closed. I would be happy if someone help me. Thanks
[URL] ....I am trying to dynamically search multiple fields from a combo box on a form that includes a subform. I am using code from the above referenced link within this forum.
It works without the "setFocus" for the Listbox except it jumps to a record after the very first character is entered instead of narrowing down as characters are typed. If I leave in the "setFocus" I get run-time error 2110.
I would like to take advantage of using combo boxes to search records on a form but do not want user to be able to edit or change any of the data. Setting the form to read only of course, disallows use of any controls on the form.
I have several forms in a navigation form. On all the forms, the little search bar at the bottom shows # of 103 records. On my navigation form it shows 1 of 1 and won't allow me to search.It would seem that the search bar is only looking at the current form and not at the records.
I am building a search form in my DB. I have got this working by using a text search box on the main form which then links to a subform that shows the results. This works great, however, when the form is first opened, it shows all the records that be searched. Is there any way that I can stop this? I just want the subform to be blank until a search is ran.
What could cause certain records to not be searchable when performing a search?
I have created a pretty simple Search Form that I can look up a record by a Job#, Phone#, or Name. It populates a list of record(s) on the bottom pane using a split-form.
The issue that I have recently discovered is that some records are not showing up when searched, though the record does exist. I can find the record by manually going to a record in the database that is close to the one I’m looking for and then using the previous and next record button to view the record I want.
So if a record exist and has the relevant data for the field that is being searched, why would it not find it? Using the default search built into Access on the bottom record bar, I can find the record using the search criteria I mentioned above.
I also have the Search Form set that if no search criteria is entered, it will display ALL records. Even with all the records shown, these few records do not show up.
Could these few records have a feature or setting that is disabled that needs changed? If so, what to look for at this point.
I'm trying to make a filtered search form using "*" as a wildcard default value in combo boxes, this works for all the text fields except for the account number field (Numeric primary key). After quite a bit of reading up and searching, I tried using the following as the row source;
SELECT customers.ACCOUNT_NO, customers.CUSTOMER FROM customers; UNION SELECT "*", "All" From Customers;
I am designing a db for a dental clinic. I created 3 tables as follows:
1.T_Patients (P_Code(PK) and other fields) 2.T_Diagnosis (P_Code(Fk), ToothRecId (PK) and 32 text fields for 32 tooth named (UR1 to UR8, UL1- UL8 for Upper left / right Arch and LR1 to LR8, LL1 to LL8 for Lower left / right Arch) 3.T_Pmts (P_Code (FK), PmtRecId(PK) and other fields
I created one main form based on T_Patients tbl and similarly another 2 forms from other 2 tables. In the main form I placed 1 sub-form and 2nd sub-form. Bothe the sub-forms are Master / Child relationship on form over P_Code field in the main form.
Single character length has used for all the 32 text fields in table T_Diagnosis. So only one single B, C, D, F, M could be entered.
Normally we search patient’s profile by patient’s code or by name that displays in the main form. But the client needs to search patient’s record by tooth criteria.
There may many tooth fields in the first sub-form that are null and only some of them with any one of the B, C, D, F, M character. Bcz there is very rare chances of damaging all 32 tooth of the patient.
Now my clients want to search based on the data which are B, C, D, F, M characters. Means once he types C (stands for Cavity) in a search text box then it should bring all the sub-form records that hold value C in any of the 32 fields.
1.How can I do this when the search based on SUB-FORM and not over the main form? 2.The entered criteria value might by in other field also. Like say if entered C then this value may be in any of the 32 fields. So how it would bring all records?
I am confused how to do it. I attached a pic of my form for your ready ref. :confused:
I would really appreciate if somebody could help me.
I'm creating a search form to filter out data based on certain inputs. My VBA code looks like:
Code: Private Sub Command18_Click() On Error GoTo errorcatch Me.Filter = "([Experiments.Log] Like ""*" & Me.Text21 & "*"") AND ([Expdate] Like ""*" & Me.Text22 & "*"") AND ([BaseSolution] Like ""*" & Me.Text24 & "*"") AND([AddCom] Like ""*" & Me.Text25 & "*"") AND ([Test] Like ""*" & Me.Text26 & "*"") AND ([Plan] Like ""*" & Me.Text23 & "*"")"
Me.FilterOn = True Exit Sub errorcatch: MsgBox "Error #: " & Err.Number & vbCrLf & vbCrLf & Err.Description End Sub
However, the output does not include records where other fields are blank. I have read that I may need to use Is Null but am not sure how to.
All using access 2010. Here's the situation. I built a searchform according to datapigtechnologies video. Used a query with criterias on fields i want to search on the form: ex.
Code: Like [frm]![frmMyform]![MyField]
It worked fine i thought until i ran the same query outside the form without the criteria field. I filtered the query for the same result and the one used on the search form did not return all data records for that particular result set. Ex. on the searchform; I select the fields I wanted to filter then ran the query. I come up with only 9 records when it should be 18 I get with running the exact same query without the criteria and manually filter the results.
have set up a navigation form which contains 5 unbound subforms that are made visible or not visible thru the on click event of command buttons on the main form, the subforms have a command button with an embedded macro that searches for a record based on what has been keyed to an unbound text box on the subform, this works fine when the sub forms are opened independently of the navigation form but when the search is done from within the main form, the error message is, "....cannot find the referenced from frmAQIFAList" subform, I tried referencing the main form name infront of the subform name but this also doesn't work, perhaps this would be better with code ? or is it because the subforms are unbound ?
I have three tables, tblPeople, tblAddresses and tblVehicles. I have a form called frmPeople that shows a single person record, and has subforms with the list of addresses and vehicles for that person (each record has several). I want to create a single search form with each of the fields in my tblPeople, tblAddresses and tblVehicle tables, and allow the user to type anything into any of the fields on the search form, and have the search form fetch records that match.
So far, I have the query built, and the tables all linked the right way (I think), and I have all the search fields coded. And it works GREAT... except for this one little issue: If I do a search, and I put "Smith" in the last name field, I will get several Smiths in my search result, one for each address and vehicle combination. In other words, if I have ONE Smith in the table, and two vehicles and two addresses for that Smith, the query results give me FOUR Smiths! One with Vehicle1 and Address1, one with Vehicle2 and Address1, one with Vehicle1 and Address2, and one with Vehicle2 and Address2.
What I would LIKE is to have ONE record in the query results, and that record shows me that one Smith. And if I then search for "Plymouth" in the VehicleType field, and I have Smith in the name field, I'll get ONE record, and it will be the one of Smith with his Plymouth (Vehicle2).
Here is how my query looks right now (this one ONLY has the last name and vehicle search function to save space), and this is the one that gives me multiple results (which I do NOT want, unless multiple PEOPLE match the search criteria):
Code: SELECT DISTINCTROW tblPeople.LastName, tblPeople.FirstName, tblPeople.PersonID, tblAddresses.Address, tblVehicles.Vehicle, tblVehicles.Plate, tblVehicles.VehicleYear FROM tblPeople LEFT JOIN tblAddresses ON tblPeople.PersonID = tblAddresses.PersonID WHERE (((tblPeople.LastName) Like "*" & [NameField] & "*") AND ((tblVehicles.Vehicle) Like "*" & [VehicleField]));
why the code below is not functioning properly. When I type in an acronym in the textbox, it keeps saying there is an error "Run-time error '3345': Unkown or invalid field reference 'ABO'." I do have ABO in the field.
The dysfunctional code:
Code: Private Sub btnFind_Click() If (TxtFind & vbNullString) = vbNullString Then Exit Sub Dim rs As DAO.Recordset Set rs = Me.RecordsetClone rs.FindFirst "[Acronym] = " & TxtFind
[Code] .....
The red highlighted line is where the debugger leads me to. Something with identifying the field? I would like to enable the search procedure to search throughout the entire records rather than just a specific field. How may I write such a line or two?
