Searching A Recordset Starting From The Last Record To The First
Apr 23, 2008
First I will open a form and choose a salesman. Then based on the salesman selected I want to open a recordset and start searching for the last record for the salesman selected. When the record is found some of the information from that record is pulled on the form.
View Replies
ADVERTISEMENT
Sep 1, 2014
Why my Recordset start from record # 301 instead of # 1 Here's part of my code:
Set db2 = CurrentDb
Set rst2 = db2.OpenRecordset(strTable2)
If rst2.RecordCount = 0 Then
MsgBox "No records to process."
[Code] ....
Table has 12,000 records and the first record has an ID of 1. So why is it starting from the record 301? What am I doing wrong?
View 3 Replies
View Related
Mar 23, 2005
When you start access it usually starts at the beginning of the file. How can I make it start at the last entry?
View 1 Replies
View Related
Nov 13, 2013
I have created some control buttons using the built in functions of Access2007 and then using the script supplied here modified the control.
So far the controls can add new record, save record, exit form, open next form and close existing form, open previous form and close existing form.
My next question is when the user reaches the end of the form fields how do I stop the form from automatically starting a new record?
For example, I use the TAB key to move from field to field and when I tab out of the last field the form goes straight to the next empty record.
I want this to be a deliberate action performed by clicking the Add New Record button and not an accident of a key press.
The other thing is, how do I get the form to open with blank/empty fields and not at the first populated record?
Some of the data is updated frequently so the records need to be able to be edited but I need to prevent accidental editing of the existing records.
View 14 Replies
View Related
Oct 13, 2011
I have a simple form in datasheet view in Company Name sequence. By default it starts the list at the beginning. I would like to put a combo box in the form header that pulls down the companies to allow the user to select the starting company to list. I don't want to go directly to the selected company, I just want the list to populate starting with the selected company. I can create the combo box and I know I use the After Update event to get the selected value, but how do I restart the list. Ideally, I would still like the operator to be able to scroll up and down after the list is redisplayed starting with the selected company.
View 2 Replies
View Related
Jun 28, 2006
i have a form which hold the data about a pc
i want to be able to bring up information about what software is on that pc
the software of each pc in a seperate table.
i was wondering is it possible for me to look through my pc's and click on a particular pc and be able to find the info about what software is on that pc.
View 2 Replies
View Related
May 27, 2007
Hello. Im new here and also new to both Visual Basic and Access so please be patient with me :)
I've downloaded SearchDB.zip uploaded by agehoops. Its works exactly like its supposed to but I need to update it a bit.
Im making a MovieDatabase and have a table with Orginaltitle, SwedishTitle, Director, Actors and so on. When I search in "Director" for "Francis Ford Coppola" or just "Francis" the movies which is related to him comes up. But when I search for "Ford Coppola" or only "Coppola" nothing comes up. I want the user to have that possibilty to search using the last part of the name too. Is that possible?
When searching with the binocolor icon it works fine when chosing "part of record", i think thats the english translation for "Del av fält". I have a swedish acces version so im not so sure but anyhow I think you understand what I mean.
To sum it up I want the ability to search writing only a part of what the record contain including the last part and not only the first part like it is right now.
Appreciate any help!
Regards,
SoloJuve
View 6 Replies
View Related
Feb 8, 2005
Hi there,
i've read most of the articles in this form about searching for records in a subform. I've envclosed a picture witch displays my problem:
-i would like to find a record"(invoice)" in the subform"facturen" with a searchbutton. As you can see, i've already made a searchbutton named"zoek cliënt", but i can only find records within the main form "debiteuren". Can somebody help me with the code for the searchbutton?
Thanks in advance.
Greetings,
Stephan
View 1 Replies
View Related
Jul 19, 2005
I have a form that assigns an Auto Reference Number to each record. Now the records are later edited. Is there a way that I can have the user enter the Reference number and come directly to that particular record that needs to be changed in the form. Like a dialog box that asks Enter Reference Number or something.
View 2 Replies
View Related
Sep 9, 2006
Hi,
Not sure where to put this, but as I want the information to be shown in form view, I guess this is the bext place to start.
In breif, I have created a database, in which infomation on machinery is held.
The problem I am having (atm), is I have to create a function, which I want to be presented in form form, where by each item can be searched by it's RequestID (unique) or the customer who owns it, so that its current location can be attached (or viewed).
I'm not sure whether i've worded this well, so to sumerise:
I need a form with 3 fields, RequestID, Customer and Location.
Where by I input the RequestID, which brings up the Customer and Location, or input Customer which brings up the RequestID and Location (obviously there will be mulitple results from Customer search).
Again, I hope I haven't confused anyone because it's pretty simple what i'm trying to say, but....
Thanks, Ben
View 1 Replies
View Related
Aug 2, 2013
I have a form where a user enters data. One of the things the user enters is a "lot size". I need this lot size field to be checked against a query in the database to determine if the quantity is acceptable or not.
The order number in this query is in certain cases missing a leading zero, so I need to truncate this from the user entered form field.Finally I want the user to be notified if they are trying to exceed the lot size in the query.My code is as follows:
Code:
Public Function RemoveFirstChar(RemFstChar As String) As String
Dim TempString As String
TempString = RemFstChar
If Left(RemFstChar, 1) = "0" Then
If Len(RemFstChar) > 1 Then
TempString = Right(RemFstChar, Len(RemFstChar) - 1)
End If
End If
[code]....
View 14 Replies
View Related
Sep 7, 2011
OK so my situation is a simple 1 to many relationship where the main form has the primary key and the secondary input form needs the foreign key to be passed to it to link the 2 tables.
Say for example 1 Site has many sections (Plants). The main menu form can therefore select the Site and filter to another combo box containing the plants that are attached to that site. The user can then either edit the plant or add a new plant record linked to the site.
I have figured out how to edit the plant attached to the site using a macro that opens the form Plants with the site ID passed from the main form however when I want to enter a new Plant I still need the site ID passed to the Plants form however using the following code
DoCmd.OpenForm "frmPlants", acNormal, , , acFormAdd
It simply opens the form as a new record and therefore will not transfer the SiteID
No doubt this is not the hardest thing to do I just can't work out how to do it
I have seen somewhere using code similar to this
stLinkCriteria = "[SiteID]=" & Me![SiteID]
DoCmd.OpenForm stDocName, , , stLinkCriteria
But I can't seem to get it to work.
View 1 Replies
View Related
Jan 24, 2005
I have a form with a record source already defined (used so the user can browse through records and edit them)
I have the form store requirement ids and not the name however I would like to present the requirement name rather then the id to the user
So it tried with a sql query and a recordset but I keep getting the error data type mismatch in criteria expression on this line
Set rsm = dbm.OpenRecordset(sRequirementName1)
I think the problem is having the record source already defined and then having a new Recordset not sure how to work around it
here is the code
----------------------------------------------------------------------------------------------------------------------------------------------------------
Private Sub Next_Click()
Dim sRequirementName1 As String
Dim queryResult As String
Dim wsm As workspace
Dim dbm As Database
Dim rsm As Recordset
sRequirementName1 = "SELECT Requirements.RequirementName " & _
"FROM Requirements " & _
"WHERE Requirements.RequirementID = '" & Me.RequirementID11.value & "' "
Set wsm = DBEngine.Workspaces(0)
Set dbm = wsm.OpenDatabase("E:Practicum Hours.mdb")
Set rsm = dbm.OpenRecordset(sRequirementName1)
queryResult = rsm.Fields(0)
Me.HoursCompleted11_Label.Caption = queryResult
End Sub
----------------------------------------------------------------------------------------------------------------------------------------------------------
I have also attached the DB if anyone thinks they can help, if you are confused about what i am trying to do with the modify form i made one with students that works
it is the modify hours1 form and the code above is the on click event for the next button
Thanks for any help anyone might offer
View 2 Replies
View Related
Jan 30, 2006
I am trying to go to a specific record in a recordset (on a form).
In the past I as using the typical open the form and use the filter to go to the specific record:
strLinkCriteria = "Where ID = 5"
Docmd.openform "frmName", , strLinkCriteria
This takes me to the correct record, but filters the form down to that one specific record. The users instead would like to go to the specific record, but be able to see all the other records for the form correctly.
Is there anyway to do this?
Thank you,
T.J.
View 2 Replies
View Related
Aug 31, 2004
I have 2 forms. On form1, the record source is a query. From form2, I need to iterate through the recordset from form1 and perform some action. How do I access the recordset from form1?
Thanks in Advance,
-jnoody
View 1 Replies
View Related
Jul 4, 2007
hey guys
having a corruption issue with my database, it happens when a user updates a record and a second user has that record open elsewhere. then when the second user closes they save their changes over the top, corrupting the whole record.
so i need to know with a recordset if there is a way to check if a second user is currently looking at the same record?
thanks
View 4 Replies
View Related
Oct 17, 2014
I am trying to lookup a record in a recordset. If no match is found then run an append query. I am having trouble coding the findfirst syntax.
Code:
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim WO As String
WO = Forms!frmdsh_workorder!txtWO
Set db = CurrentDb
[Code] .....
When I run the Function, it throws a RT error #3077 on the .findfirst line. (Syntax Error (Missing Operator) in expression. )
View 3 Replies
View Related
Aug 4, 2013
I have a DAO.recordset called "rsSQLIn". This comes from a csv file by:
Code:
strSql = "SELECT * " _
& "FROM [Text;Database=" _
& strFolder _
[Code]....
While the validation runs a boolean keeps track of validated input and errored input.
After validation the validated input is dumped in the table.
Now what I want is de saving the errored record from "rsSQLIn" to be copied to a new .csv file.
The problem I have is that I cant seem to get the current record from the recordset "rsSQLIn". How do I reference this? I need the complete set of 24 fields being the same within "rsSQLIn"
View 3 Replies
View Related
May 8, 2014
I am attempting to use 2 fields from a query to supply the Top and Left Properties of a Collection of Rectangle Controls on my form. The purpose of this is to display the locations on a map of "Spots" in a haunted house. The query that I am using shows the spots that have been pre-tagged with the location of where they belong on the map (currently the query has only 24 tagged spots). On the actual form I have rectangle controls (control type acRectangle) with their visible property set to False by default, named box1 through box25 (there will be more eventually, as I am just working with this test group).
I started with the following code, yet it stops after (correctly) placing the first spot on the map (please see the attached jpg):
Code:
Private Sub Form_Open(Cancel As Integer)
Dim ctl As Control
Dim db As DAO.Database
Dim rst As DAO.Recordset
[Code]....
I'm sure I need to have 'Loop' in there somewhere, but I am not sure exactly where to place it, or if another line is also needed.
View 10 Replies
View Related
Oct 18, 2013
I have a following problem: I have a form in continuous mode. Users are supposed to filter data in it to their liking using inbuild filters in Access. After that there is a button that should calculate total weights in filtered records (at this point, I add more calculations once I have solved this issue). Code of button is as follows:
Code:
Private Sub btnCalculateWeight_Click()
Dim rst As Recordset
Dim weight As Long
Dim material As Long
Dim subtype As Long
Dim locus As Long
[Code] ....
Loop goes through recordset correct amount of times but for unknown reason takes value only from the first record and sums it N times where N is number of records in recordset. Recordset seems to be correctly assigned according to messageboxes I added to pinpoint problem. PotteryWeights is a custom function I made and it works properly.
View 2 Replies
View Related
Nov 5, 2013
I have a problem with trying to execute a command for each record in a recordset. What I'm trying to build is a file distribution system. I have a form with the path where the source file is and a subform with a couple of records where the destination path is defined. I use the code you will find below, but it will only copy the file to the destination from the first record.So the code will do the filecopy command for every destination.
Code:
Dim Sourcepath, Destinationpath
Sourcepath = Forms![Item distribution]![Item source path]
Destinationpath = Me.Destination_path
Dim rs As DAO.Recordset
Set rs = Me.Form.Recordset
[code]....
View 12 Replies
View Related
Jul 18, 2013
Is is possible to generate a workbook for each record in a recordset, and title it using the unique identifier for that record?
I created the following code, but it does not seem to work. First of all it doesnt like the string and secondly it does not like the declaration of wb as Excel.Application
Code:
Private Sub generate_wkbk()
Dim rsID As DAO.Recordset
Set rsID = CurrentDb.OpenRecordset("Select * FROM tblMeeeting;", dbOpenDynaset)
With rsID
rsID.MoveFirst
[Code] .....
View 3 Replies
View Related
May 8, 2015
I am trying to copy a subform record set from one record to the next record. The data in the main table is copied over using this method;
Code:
Dim v1 As Variant
Dim v2 As Variant
Dim v3 As Variant
Dim v4 As Variant
v1 = Me![Today's Date].Value
v2 = Me!Insured.Value
[Code] ....
Can I integrate the copying of the subform data to the new record with this or do I need something different, and if so what?
It's a many to many relationship and I've tried adding the following line to the code:
v5=Me![Endorsements Umb XS].[UmbID]
same=v5
and it works but it only copies the first record out of the set.
View 14 Replies
View Related
Aug 7, 2015
Is there a way to print the current record from a dao.recordset?
This is an exercise to compare data content.
I have a table with 30 fields and thousands of rows (rs1).
I'm comparing it with a copy of the same table (rs2) that has the same number of fields and the same rows and almost the same content.
I can loop through the recordsets and get the cursor to stop on a field whose values don't match, lets say on row #x
and the programmed message will say something like:
"ROW: 699 Field: [RequestStatus] rs1.VALUE: Closed, DOES NOT MATCH rs2.Value: VOID, in the comparison recordset"Then I'd like to print the entire Row, Row #699.
I thought I could use rs1.getrows but I'm not sure how to make that work.
View 4 Replies
View Related
Mar 13, 2014
I found this code and have substituted parameters to suit my own needs however the loop is not working. Only the first record in my recordset (which is a test recordset of only 3 records) is being updated.
Also, for testing only, the edit or update being applied is trivial: Description = "WHITE RESIN". If i can get the loop to work I want to substitute higher functionality to the module.
Private Sub Update_Click()
Dim dbs As DAO.Database
Dim rsQuery As DAO.Recordset
Set dbs = CurrentDb
Set rsQuery = dbs.OpenRecordset("qryRmResin", dbOpenDynaset)
[Code] .....
View 14 Replies
View Related
Sep 22, 2013
I have the listbox named "payment_date", which shows recordset specified by following code:
Code:
Private sub Form_Current()
Dim que As String
que = "SELECT [date] FROM payments WHERE id Like '" & Me!myid & "*' ORDER BY [date] desc;"
Me.payment_date.RowSource = que
End Sub
I need my listbox to show recordset with record count like this:
3.date
2.date
1.date
View 4 Replies
View Related