Section Header At Bottom Of Page And Detail Lines On Next Page
Nov 22, 2004
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer) If Page = Pages Then Me.[TextBoxName].Visible = True Else Me.[TextBoxName].Visible = False End If End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
I'm trying to create a report where I can use a section header as a hyperlink to show/hide detail, but only for that section. For example, my customer names are:
Code: ABC Co. ZYX Co. 123 Co.
If I click on ZYX Co., I want it to show the contracts for ONLY that customer:
I have a main report with 2 subreports. My main report has a header section, the 2 subreports are in the detail section of my main report. How can i prevent my report from splitting up my header and my subreports. (Header section of my main report is a company and the subreports are the detail of the company.. i don't want my compnay name on the bottom of a page and then the detail on the next page.. it does this sometimes. thanks!
I am using MS Access 2003.I have a report whose Detail band contains a zero-height Comment field positioned at the bottom of the other single row of fields. It has Can Grow = Yes, so it sits waiting to grow if there's any data in this Comment field.
However, when this report prints, if the Comment field just "happens" to straddle two pages, it gets positioned only on the first page and gets cut off in the process. (See attachment 2.) Ideally, the entire field should display on the second page instead.
If I adjust the margins in Page Setup, I can fix this on this particular report. However, depending on the data being reported, these new margin settings can create a problem for the same report with different data. (All depends on where the Comment falls.)I'd like the report to work consistently, no matter the data or margins.
Is there a way to have a datasheet open with the last record at the bottom of the page? I now have it opening to the last record, but it has the last record at the top and can't see the records before it without scrolling.
I have a report which is grouped by employee number - each group can have one or many records displayed - it works fine, but can look untidy sometimes when there are more records than will fit without wrapping onto another page; this is particularly prevalent when there are two or three groups - the third one may run over onto the next page, without group headers.
Is there anyway to force a page break at the bottom of a group if that group is not going to fit on the current page in its entirety?
I have a report which shows the results of two separate queries in a simple table view.
One set of data varies in size depending on the amount of records and the other is a fixed size and never changes.
I'm wanting to make my report always show the fixed size data in the bottom right corner of the page when its printed.
I've tried putting it in the footer section of the report but don't want it to affect the size of the details section and just show next to the other query results.
Is this possible and if so how would I achieve this?
I made a blank form, created everything on my form then added a header to put the title etc in and tried to view it using form view and the header isn't appearing. What do I need to change?
I'm using VBA to insert the page number in a header. It's working, exept for a couple of things. I want it to insert the page number at the current position, and restart numbering at each section. I increment the section # with the variable x. Currently, it's inserting the page number at top-left of header. I want it to insert the page number after the word "Page" followed by 2 lines breaks.
Any way to repeat the Report Header on every page?
I had my header in the Page Header so that it would repeat on every page, but it did not have the CanShrink option so I put it in the Report Header so it shrinks when I want it to, but now it doesn't repeat. I was hoping there was some kind of code I could implement that would let me repeat the Report Header on every page.
Or is there a way that I could get the CanShrink property in the Page Header?
I have a report, a phone list, which has two columns, see the attached file for a screen shot.
The Employee Name, Mobile Phone and Desk Phone text is in the "Page Header". The Data fields that retrieve from the table are in the "Detail" section. The whole report is 8.89cm wide. The two columns fit perfectly across a portrait A4 sheet.
When I run the report to Print Preview, I get the two columns fine, but the Employee Name, Mobile Phone and Desk Phone text doesn't repeat at the top of the second column. Is there some way of achieving this? I want the part I have circled in RED to appear over the top of the second column as well.
I would have thought there would be a simple check box somehwere that would be something like : "Repeat Page Header on multiple columns", or something as equally useful. Strange that this is so difficult to do, as am sure that this sort of thing is something that lots of people would want to do?
I am trying to create a report that has a header ( all ok ) then could have 1 or 15 detail lines ( all ok ) which contain cost for each line
then I have a footer with the subtotals of the costs and also bank details then I have footnotes
What I need the report to do is keep the subtotals, bank details and the footer notes at the bottom of the page all the time weather I have one detail line or 15 detail lines
What is happening at this time is the footer information is moving up or down depending on the number of lines I have.
I created a form with a continuous default view and created labels in the page header of the form. When I view the form, I can see the data from the form detail, but the lables in the page header do not appear. Why can't I see the labes in the page header ?
I have a report where I number pages based on the Store (muliple stores in report but page numbering resets when Store changes) I do this by manipulating the page number field on the report by code in the report sections to reset it and to increment it.
Code:
Private Sub GroupHeader0_Format(Cancel As Integer, FormatCount As Integer) Me!PageNum = 0 End Sub Private Sub PageFooter_Format(Cancel As Integer, FormatCount As Integer) Me!PageNum = Me!PageNum + 1 End Sub Private Sub ReportHeader_Format(Cancel As Integer, FormatCount As Integer) Me!PageNum = 0 End Sub
The report has a Page Header with various fields and labels and that's been fine however I've had a request to hide a field on subsequent pages (i.e. print it on the 1st page of each store then hide it).
So I added the following code to various sections, but can't get it to work correctly. The fields (label and text box) appear on Page 1 for the first store then get hidden but never return even though when I step through the code it is functioning 'correctly'. The GroupHeader code is performed but the fields don't get displayed on the report. I think is isn't re-painting that section but adding code to the Paint event does nothing, and in fact doesn't actually get run, so not sure when that event is triggered.
Code:
Private Sub GroupHeader0_Format(Cancel As Integer, FormatCount As Integer) Me!PageNum = 0 lblMemberNo.Visible = True MemberNo.Visible = True
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
I have a database of high-school football players, and I am looking to print out single page reports (or forms) that will show detail from several tables and queries. This will act as their resume when they visit schools on recruiting visits. The reason for needing query items, is that I have developed queries that return the most up to date height, weight, 40 time etc., and that single most up to date number is what should print, not the entire table. When I try to build a report it will let me bring in multiple tables, but not queries.
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.