I've been trying to figure this out, but it looks like a no go.
I wanted to give my users the ability to create/modify queries, but NOT create/modify tables.
Does anyone know if this is possible in Access 2002?
Thanks,
Earl
Hi,
I am trying to make a query from fields out of 3 tables.
All tables must include following fields:
Table 1 fields:
WR04 (year 2004)
Date
Reporting Person
Table 2 fields:
WR05
Date
Reporting Person
Table 3 fields:
WR06
Date
Reporting Person
I am trying to pull together in the query any given individual (Reporting Person) who may be included in all above tables but believe I may have a relationship problem as I am only getting results that match all tables.
I hope this is clear.
Any suggestions please.
Hello.
I'm building a history table to keep track of some changes that occur on one of my forms.
Here is what I'm using to build my history table:
Dim rs As DAO.Recordset
Set rs = CurrentDb.OpenRecordset("tblDateCycleTestingChanges", dbOpenDynaset)
With rs
.AddNew
![CycleTestingDatesID] = Me.CycleTestingDatesID.Value
![Changed] = Now()
![ClientID] = Me.ClientID.Value
![ProjectID] = Me.ProjectID.Value
![TaskID] = Me.TaskID.Value
![TaskStartDt] = Me.TaskStartDt.Value
![TaskEndDt] = Me.TaskEndDt.Value
.Update
End With
Set rs = Nothing
End If
I have 2 questions:
1. I'm not sure where to insert this event. I'm thinking on Before_Update on the updated field? (I don't want to put it into Before_Update for a form event as I have other things that are being filled out/changed and I only want to keep track if certain fields on the forms are updated/changed.
2. I would also like to keep track of Old and New values for those specific fields. Is that at all possible?
Thanks.
I have at least 15000 records and all of them should be corrected if there is existing duplicates with same EMBG and different name. More precisely if there are 2 persons with same EBMG lets say 123456789 but one with name Naim Arifi and other one Naum Arifi then query should present to me Naim and Naum. Example
1. Naim Arifi 123456789
2 Elton John 123456452
3. Naum Arifi 123456789
4. Naim Arifi 123456789
* *
* *
* *
* *
722. Naim Arifski 321546798
* *
* *
So the record 1 3 and 4 and 722 should be highlited because they have same EMBG and I need to find where is the mistake manualy (correcting from Naum to Naim). In this case row number 4 is mistake instead of Naim is Naum. I need to correct it manualy.
Could someone provide me some help
Ok, I currently have a query built with requests. What I want to do is initially set each request with a priority.
Then when one request is closed the query will take the requests with priority 2 and change it to priority 1, change the request with priority 3 to priority 2 and so on. Also any new requests that are entered I want to be able to set their priority as well. Can anyone help me with this, or is it even possible?
Any help would be greatly appreciated!
:( Hi Guys,
I have a very basic DB of customers names and addresses. What I want to do is find all the enquiries within the months of August, September and October, send all these enquiries to a new table so that I can use this new table for a mailshot.
The date of the incoming enquiry is in a field on it own and written as dd/mm/2006.
If there is an easy way to create a mailing list from the original table please let me know.
Best Regards
Keith:o
i have two tables that only need to exist for the length of the user's session. i build them with ADOX in my backend database when the user starts up, and destroy them with ADOX when the user closes the application. the name of the table created varies, too, depending on the user (userID is built into table name).
i need combo boxes on my forms in the front end to be able to access this data.
is there a way in code, once the temp tables are built, to create a 'link tables' type of setup?
my alternative is to build the temp tables in the front end portion, but i don't really want to do that.....
I have a table that lists county names. On the data entry form only the county names are displayed. However, I have another form that is used to build a custom query based on various criteria, of which county is one.
To make the table compatible with both both forms, the data source for the dropdown list for data entry is: Select * FROM county WHERE county <> "No Selection"
For the SQL form the code is simply: Select * FROM county The default value of the dropdown list is "No Selection". When dropdown list for county is set to "No Selection" the program interprets it as "select all counties". Other dropdown lists provide other parameters such as the project year, nature of the project etc. Each of these other dropdown lists also have a default value of "No Selection". The SQL form thus gives me the ability to mix and match several criteria. For example, it will display all projects in a particular year for a particular county or all projects in all counties that involve the construction of a residence.
My question, instead of physically having the string "No Selection" in the table itself, is there a way to embed the phrase "No Selection" in the SQL expression itself and still have it as an option on the dropdown list?
OK, here's the deal. I have two data tables, one of which holds many types of customer information and has a very large number of records, including, name, address, phone, and email. The other table contains only email addresses. Each email in the second, smaller table corresponds to a record in the larger list , by virtue of both records sharing the same email address (primary key?). I need to be able to take a short list of email addresses from one table and produce all of the records from the larger table that have corresponding email addys, essentially. Can somebody shed some light on how I can structure a query to solve this dilemma? Sorry for the newb question, just getting started out using db's.. Thanks!
View 1 Replies View RelatedI'm making a library database program thing... There's an option for the user to view all books on loan.
I have two tables:
Books, which has columns ID*, ISBN, Author, Title, Year, Location
BorrowerStorage, which has columns Book ID, Name, Email Address, Desk Number
Book ID in BorrowerStorage is related to the Books primary key.
Now, for the viewing all books on loan, I want it to produce a read only table which contains all the entries from the BorrowerStorage table and the corresponding Title/Author columns (i.e. the records for which the ID in Books column = BookID in Borrower Storage column)...
Hi
I am really at the end of my teather with this problem so i really hope someone here can find a solution.
I have 2 tables; Client (Client general info, defined by their location), ClientHardware (Info on the hardware a client has and also it's condition).
I need to be able to select one or more clients and display one or more conditions of their hardware, e.g. London, York, Bury + Red, Amber, Green condition.
After the Query is working right i will need to output it to a report through a button on the form.
I attempted adapting This Method (http://www.databasedev.co.uk/query_using_listbox.html) but adding another list and query just resulted in the report showing the all the records of the selected client (e.g. london) then all the records with the selected condition (e.g. bad) it would be ok if i could merge the list box selections into one query but right now it looks like this
MyDB.QueryDefs.Delete "qry ClientName"
Set qdef = MyDB.CreateQueryDef("qry ClientName", strSQL)
MyDB.QueryDefs.Delete "qry RAGType"
Set qdef = MyDB.CreateQueryDef("qry ClientName", strSQL2)
Is it possible to put the variables in strSQL2 into the creation of qry ClientName somehow?
Any help, large or small will be appreciated as I'm really at a dead end with this.
Regards
Phil
I currently have 2 tables in a database that I'm trying to build a query off of. The first table lists personnel & their position #s, and the second table has a column for "rated person", "rater", "senior rater" and "reviewer" which are all part of our annual evaluations. I'm trying to program the query to display the names of the person attached to a position #, but can only get the query to return the actual position #s.
I'm using the table to assign each position # appropriately, i.e. position # 10202 is rated by 10103 and senior rated by 10101; I do this with the lookup data type. Once each position # is assigned, I'd like the query to display the name of the personnel instead of the position #, i.e. when queried, it would return under the rater column JOHN SMITH instead of 10202, and in the senior rater column JOHN JONES instead of 10103, etc.
I have a combobox that I use to combine the employees first name and id number. So when you pull down the list you can select the employee you want and it is saved in the form. Now I need to create a query so that I can create a report on each employee separately. The query will not let me get the Employee Frist Name/ID from that saved field. I thought that what is saves in that field, you can retrieve it in your queries or reports.
View 3 Replies View RelatedI am building a database with Access 2013. The information contains data built from a workplace violence report form. I have to build a query to pick the data but must fall between two different years.The data range must be from 09/01 previous year (ex. 2012) and 08/31 current year (ex. 2013).
As the database collects more information, the year range will change but the other information will stay the same (ex 09/01/2013 to 08/31/2014).I do not want to change the query annually, just let it change the year automatically.
Hi, I am desparate!! I work for a high school and need a database to record student community service hours over their high school careers. I have been trying to do this on and off since the summer. I promised I would have it done by the end of winter break but........I may have to go back to a spreadsheet if I can't get this right. That has proved to be a royal pain in the past few years.
I have set up tables but getting the relationships right is a problem. I dont know if it is possible but I would like to set it up so that I have a student form with 4 subforms for each school year. Each subform (4 tabs) will have the title of the school year (i.e. 05-06). We don't allow them to get credit if they go over on their hours for a given year. In other words, they can't do all their service hours in say, freshman year. They have to do 10 as freshmen, 20 as sophomores, 30 as juniors and 40 as seniors.
Each year I can refresh from the school db (for new students, etc.) but I can't go in and create a report in that program as we don't have the capability.
I am trying to teach myself but every tutorial I come across doesn't give reasons why you do something so I can figure out how to convert that info to help me. I have been researching this for a long time and looking at sample dbs.
Can anyone help? I am going to try to attach a copy of the mess I have made so far, Hopefully
Thanks in advance.
Hello all,
I need some assitant in building a simple check reconciliation database. I was wondering if anyone can guide me in doing so? Or if anyone has some kind of sample i can use that would be great. thanks
Hello,
I want to build a agenda, like the one shown in the image below.
I have no idea how to start.
Any help would be greatly appreciated.
Thanks in advance
http://www.wega.nl/images/scherm/agenda.gif
I have made an Access database containing contract names and addresses. I need to have each of these contracts linked to another table which shows the allocated engineer for the particular contract. I used a "one 2 many" relationship using a field "LinkID" to do this. Each engineer has a unique "LinkID" in the engineer table but the engineer changes each day. The engineer for each particular day comes via an excel spreadsheet. The way it works at the moment is that the engineer name has to be manually changed each day, and this takes time. I have tried importing a linked excel table which looked like it would work, but was not able to use the linked table in the same "one 2 many" related table format as above.
What i need to do, is find a way for the fields containing the engineer name to be automatically updated somehow, possible by reading the values from the excel sheet.
Anybody know of any way for this to be done?
Thanks, and hope this makes sense got its got me baffled.
*** Edit **** Thinking about it, i could have an imported execl sheet which contains all of the engineers for each day. Would there be a way using a macro, to update the data in the engineers table that is related to the contracts, by overwriting it with the data from the linked spreadsheet?
I'm running a 9 parameter query, where values for the criteria are drawn from a form. I'm confused as to how I build an "if, then" string so that if one of the parameters is left blank, the program will skip it and go to the next.
Any suggestions?
I need to create an sql statement where the having statement can grow depending on how many conditions I pass to it. There maybe 10 conditions or there may only be 1 condition statement. I guess I'm really looking more for proper structure. Should I use "if" statements or is there a way to structure a variable with "OR" statements in it and use that.
conditionStr = "Rental"
autoSeg = -221205415
strSQL = "SELECT tblSubSegments.fkSegment, tblSubSegments.fkType, " & _
"Sum([tblSubSegments]![Quantity]*[tblSubSegments]![Units]) AS Expr1 " & _
"FROM tblSubSegments " & _
"GROUP BY tblSubSegments.fkSegment, tblSubSegments.fkType " & _
"HAVING (((tblSubSegments.fkSegment)= " & autoSeg & ") AND " & _
"((tblSubSegments.fkType)= '" & conditionStr & "'))"
rst.Open strSQL, gblEstDataCnn, adOpenKeyset, adLockPessimistic
With rst
count = .RecordCount
End With
This works fine and returns a record count of 1 however if I change the conditionStr to:
conditionStr = " '& PMTravel & 'OR' & Rental &' "
This of course does not work. Thank you for any help.
Hi,
I am hoping this is the right place to find some help.
I have just started access (2003) and i am trying to build a list.
Let me explain.
I have a table that contains
cartcode, description, price
and another containing
manufacturer, model
I then created a new table that links these tables together so that if i click the little + next to a cartcode i can see a list of models linked with that cartridge.
What i want to do though is create a query/table/anything that will create me a list of cartridges and then in the second column a list, hopefully seperated by a comma or all the printers models related to that cartridge.
I hope that makes sence.
So my question is how do i create the list which included related printers?
Thank you
Hi all, i'm new here and I have a query about a database i'm building with which any help would be appreciated.
I'm designing a form and I need to be able to have an option to save to a temporary table for retrieval by users so that they can continue their saved record at a later time. Does anyone have any ideas on the best way to do this as I am relatively inexperienced and I have to have the whole database complete before Wednesday:confused:
I have been asked to add a building entry log (Session Log) for a gym members database I created 2 years ago, unfortunately having racked my brain for the last week I am no nearer a solution.
Background:
I am a novice with a little knowledge (Dangerous I know), the main structure of the database is Contact [Storing address and name], Payments [Storing membership info - renewal date etc] and Sessions [Storing session date & time] this sessions table was recently added as a stop gap measure to allow the staff to enter user sessions manually.
Problem:
System needs to log user as IN and record the current time on first entry of userID (5 digit number), then the second time userID is entered it must log user out and record the time.
Resources:
I have just a single laptop running windows 98SE, and a USB numeric keypad. I should be able to get hold of a second monitor if required, but beyond that it is a case of beg, borrow, or steal as my budget is ZERO.
Any help, or suggestions to get me on the right track would be greatly appreciated.
Hi i have a assignment in which i have to build a database with documentation (attached file has details about the assignment) I have no prior database experience, and have no idea where to start.I want to build the database for a computer store which sells computer products. I don't want to make it very complex, since my database skills at this stage are very poor. I will appreciate if someone gives me a run down or steps in building this database. I have no clue where to start, since this is probably the first database i have ever built.
View 3 Replies View RelatedHi,
I want to build an access application for a bicycle shop, I have a little access knowledge and would like to get more information on doing this.
Is there a place to look for on the web on how to build an application like this ?
thanks.
Hey Guys
Great Forum and another newbie here
I have created an invoicing system for my business, as i was unhappy with MYOB.
Basically i have Product ID and Desciption in 1 table.
In another, called registry, this is where i input the data for the order.
What i basically want to do is?
When i type in the Product ID in the registry table, i want the description field to automatically appear in the cell next to it. As this would save a lot of time
Any help would be much appreciated
Thanks
Tarek