Select Only Records For Specific ID Query
Jul 31, 2007
This is killing me,
I have a form with a unique ID, I have a query that pulls all data regardless of the ID on the form.
How can I get the Query to pull only the data for the ID that is currently in view on the form?
Please help..
Thanks,
Fen How
View Replies
ADVERTISEMENT
Jun 16, 2014
How can I get a Query Criteria To Select All Records or specific records in query design section.
I have a table that shows many departments with credit card transactions. I like to run a query to see specific department, or have an option to see all the departments when the query is run.
View 2 Replies
View Related
Dec 14, 2013
While I am not new to Access, I am not well versed in its abilities as far as combo boxes go. What I have is a Form where a combo box allows you to pick from a table records 'record ID #' in order to fill in the data of that record to the rest of the form.What I want to do is use a query to select specific records from this table and allow the combo box to show only these 'selected Record IDs' for user selection.
View 1 Replies
View Related
Jun 15, 2013
In an Access 2010 form is it possible to export select records and fields in those records to a specific location?
Code:
Set objDialog = Application.FileDialog(4)
With objDialog
.AllowMultiSelect = False
.Title = "Please select a File"
.InitialFilename = "C:"
.Show
If .SelectedItems.Count = 0 Then
MsgBox ("Action Cancelled")
Else
[code]....
The user can select the directory using the code above, but can specific fields in records be exported to a excel workbook in that selected directory?For example, if the are 5 records in the database can the fields LastName,FirstName,BirthDate in records 1,2,3 be exported to Setup.xlsx in that selected directory?
View 1 Replies
View Related
Nov 3, 2005
Hello,
I'm sure this has a simple solution, but iv searched this forum and every solution that i get is filled with code that goes over my head! Well here goes...
I have a main form called expense... which contains a tab control. the tabcontrol in turn has three pages containing a subform each. (lets call them sbfrm1 sbfrm2 and sbrm3.)
All three subforms are based on three different queries (say Qry1 Qry2 and Qry3) but the three queries are based on the same table. this table contains all the expenses incurred over the months across three categories (hence three queries). the subforms are to display these expenses according to categories.. i.e. sbfrm1 displays records pertaining to Category1, sbfrm2 for category2 etc.(the queries ensure that!)
when the main form opens, the subforms display all the records in the table according to category...but not according to the month in which the expenditure was incurred.
I now want to add a feature that enables the user to choose records pertaining to a given month at the click of a button.
for eg. if there is an option group named month, (with toggle buttons as the month names), then if the user selects the month Aug, then immediately the subform1 displays records under category1 for the month Aug? However I want to include an "ALL" option as well whereby all the records are displayed for all months (the category criteria must be maintained at any cost!!!!
Is there a solution that will not use too much code!
Thanks in advance.
View 5 Replies
View Related
Jan 16, 2015
Trying to build a CRM system for the office but am getting stuck with the below...
Each company (tblCompany) in the database has at least 1 enquiry (tblEnquiries) linked to it and normally at least 1 (sometimes 0) people (tblPeople).
I have a form which loads company specific information e.g. notes/quotes/orders/people/enquiries. All data is loaded based on the company unique id (c_id).
The attached image shows Company 1 (c_id = 1). It has 6 enquiries. However the subform only displays 5 of these. It does not display any which do not have a person (or p_id) linked to it - this is consistent throughout the database. I have included the table relationships and the enquiry as well in case they are needed!
Searching the net seems to suggest 2 possibilities:
1 - the relationship join type needs to be set to include all from tblEnquiries and only those from tblPeople where joined fields are equal, however changing the join properties does not appear to have an effect.
2 - table field types do not match (all _ID fields are set to number, unique numbers only).
[edit]: am using Access 2010!
I have re-designed the query to pull through tblEnquiries and tblPeople data based on the c_id field on the open form, which is now showing all records, including those not assigned to a person.
However, in the form I can select one from the query datasheet and open to see additional info. Those without a blank p_id number do not open, I receive the error:
"Run-time error '2113': The value you entered isn't valid for this field.
All _id fields are set to numeric so am not sure how to correct this?
View 2 Replies
View Related
Nov 11, 2012
In the Owner Name field, I am looking for a way to pull out all estates. They are abbreviated with "EST" or "Estate". The problem is throughout the database, if you do a simple filter for "contains est" it will include names such as "Forester" or "LHB Investments".
How do I query, or filter this database such that it only returns the estates abbreviated with "EST" or "Estate"?
View 11 Replies
View Related
Mar 30, 2006
Hello, I am sure this is quite simple, however I cannot figure it out. I have a query that shows tblPartNumber and tblAverage. The average is calculated in the query by taking the total minutes to assemble the parts, divided by the number of parts completed. What I am trying to do is run a query that will show me the most efficient (lowest average), time for each Partnumber. Ideally the query would show me something like this;
Part # Average
1234 .72
1234 .86
1234 .94
etc...
I searched on here and it seemed like the Top 10 is used, but in my application that ommits all of the other partnumbers because it only shows ten of the records for the first partnumber. I only want to see the five most efficient averages. Any help is greatly appreciated.
Thanks, Tim
View 3 Replies
View Related
Jun 23, 2006
Hello,
I want to make a query that retrieves me all the duplicated records from a table. Itīs possible?
Thankx
View 1 Replies
View Related
May 27, 2007
I have two tables, bad design, not my choice of the way it's set up.
Table a has Fields 1-2, dups allowed in all fields. No pk was originally assigned.
Table b also has the same fields 1-6, but also has field 6.
Table a has all of the records in question, table b only has some of the records from table a but does not have any records that are not in a.
Something like this.
Table a
Field1 Field 2 Field 3 Field 4 Field 5
John Shirt blue denim button
Mark pants green straight
John Shirt blue silk button
Table b
Field1 Field 2 Field 3 Field 4 Field 5 Field6
John Shirt blue denim button new
Mark pants green straight used
If I query the two tables, a left join to b, then I get the correct number of total records. If I select any records from b, then the total records goes higher than there are, even for the two combined, listing the same record multiple time.
Any suggestions are appreciated. I am a blood bank lab person, not an IT person, or DBA, so simple responses are greatly appreciated.
View 6 Replies
View Related
Aug 9, 2007
As part of my job, each month I have to select 20 problem report resolutions and grade them on quality. Typically we have about 100 problem report resolutions per month. Is there a way I can use a query to return a random selection of 20?
Thanks,
Jim
View 1 Replies
View Related
Mar 12, 2008
I have to review 20 reports each month for quality check. I have a query that lists the reports completed within the past 30 days. Is there a way to filter this query to show only 20 random records?
If there is no way to do this, can you suggest some way of doing this so that it's impartial? For example I don't want to select the first 20 of the month because everyone will catch on and wait late in the month to post their report. Normally about 70 reports are completed in a month.
Thanks,
Jim
View 3 Replies
View Related
May 3, 2014
I'm having a problem get a query to select all of the records it should be.
When I filter the source table (200_STANDARDIZED NRGL) to show the data I want to see (PC2 = 6000; GAAP = 02; CGL = 0950, 2735, 2736, 3500 and 3501; STD VENDOR NAME = blanks), I get 33 records.
NOTE: Had to take the PC2 records that were not '6000' out of the dB I've attached in order to be able to send dB bu the PC2 filter is needed in the complete dB.
When I create a select query to the do the same thing, I get either:3 records (when I set STD VEND NAME to Like '') or 30 records (when I set STD VEND NAME to NOT Like '*' ) I've attached the dB - Query 1 is the subject of bullet 1 above and Query 2 is the subject of bullet 2 above.
BTW, the three records that show up in Query 1 are the same records missing from Query 2.
View 3 Replies
View Related
Aug 22, 2007
I am developing an Event Management DB for business training courses. I have an attendees table with a link to CompanyNames. I wish to be able to produce an attendees report based on the CompanyName ie all attendees from the selected company. I have done this by using a dropdown of companynames on a Criteria selection form. This works well.
What I would also like to do is print the same list without the companyName criteria. I am aware I could make another query but was hoping that maybe there is a way of setting up the criteria in the companyName field so that it could accept either a company name or ALL company names.
Hope someone can help.
Thanks
Peter
View 2 Replies
View Related
Apr 4, 2013
I have a Sales Table with below fields, i might have not set it up in the best way possible.
Consumer, Consumer_ID, SaleDate,Prod_Sl#,Prod_Type,Sale Amount
1. I need to update the sales price for each item sold based on category of Product Type, as we are tracking the product with Serial Number.
For an instance if 2 items of Category1 with Prod_Sl# as Sl1 and Sl2 and
2 items of Category 2 with Prod_Sl# as Sl3 and Sl4 are sold.
I need to update the sales price amount for these.
2. I want to accomplish this using a query.
View 1 Replies
View Related
Sep 19, 2013
I have a Union query as follows;
SELECT ALL *
FROM 1st_Lives
UNION SELECT ALL *
FROM 2nd_Lives;
1st Lives has 465,414 records and 2nd Lives has 151,852 records.
When I run the query I only get 604,976 records instead of 617,266 (I basically just want to add the two data items together).
View 1 Replies
View Related
Feb 5, 2014
I'm having a bit of a situation with a select query that I set up.
I have two tables, both with a list of serial ID's.
One is table field is formatted like this:
"B0340 13 453423 X"
The other is formatted like this:
"=B03401345342300"
I wanted a select query that could show me the records in a universal serial like this:
"034013453423"
This leaves out the "spaces", the "B" and the " X". (Couldn't find a way to make Access generate a new field with the serial ID correctly without a query).
So I used the "Mid" expression in a select query and it worked, it showed me the first table in the correct format.I wrote the same "Mid" expression for the other table and it worked too.But, when I ask for the results for both tables in the same query, it shows me much more records than I have(all duplicates). I figured out that when in table one I have 20 records, in table two I have 5 then the query shows 120 results (20 x 5).
This is the code in SQL view:
Code:
SELECT MainDatabase.[Transfusie Eenheid + Specification], (Mid([MainDatabase].[Transfusie Eenheid + Specification], 2, 4) & [MainDatabase].[Transfusie Eenheid + Specification], 7, 2) & [MainDatabase].[Transfusie Eenheid + Specification], 10, 6)) AS [BloedeenheidID MD], ScannedForms.BloedEenheidID, Mid[ScannedForms].[BloedeenheidID], 3, 12) AS [BloedEenheidID SF]
FROM MainDatabase, ScannedForms;
View 4 Replies
View Related
Jun 20, 2013
I have a simple select query on a SQL table from Access. The query is:
SELECT tbl_Orders.OrderID, tbl_Orders.Approved
FROM tbl_Orders
WHERE (((tbl_Orders.Approved)=0) AND ((tbl_Orders.Completed)<>0))
ORDER BY tbl_Orders.OrderID;
The strange thing is that sometimes it pulls 34 results, and sometimes 38. From what I can tell, it should be pulling all 38.
What can I do to make sure it gets all the records?
View 2 Replies
View Related
May 7, 2013
So I have a table with around 20,000 records and there is a field which holds a phone number for each individual within the organization, I want to run a select query that counts how many are not in the correct format
The format is 10 digits and it must start with a 0
Using Access 2010
View 2 Replies
View Related
May 14, 2013
Is there a way to select non-contiguous records in an Access table or query?
View 3 Replies
View Related
Feb 25, 2015
I have records using a select query that I am sending to a make table. I would like to have those records excluded from being used again for 180 days, at which point they can be used again. Essentially, I have an ID and an email address which gets stored in the Make Table. I would need to ensure that if we send an email out in Week 1, we do not send an email again for another 180 days if there is activity from that same ID. On day 181, the ID/email address can then be resent.
View 6 Replies
View Related
Jun 21, 2005
I'm trying to use code to relink the the table but that is not the only table that is linked in the DB. The other linked tables are in other databases so I want to select specific tables to relink as the others may not need it. I alway will want to select the path.
here is an example of the code I'm using I got it from one of the other users here.
View 14 Replies
View Related
Dec 12, 2007
Hi all, I need to extract in a query a recent range of records, these records should be all before a certain date and all the following future records example:
if today date is 12/12/2007 I need to extract all records that are dated from the 1st of november and all the records that come after the 12/12/2007.
In the criteria I have set "Date()" what else should I be adding to get the range mentioned above?
Thanks
View 5 Replies
View Related
Apr 3, 2006
OK I have done a select case as follows
Private Sub Form_Current()
Select Case DatePart("w", Tape_Date)
Case 1, 3, 5
Clearly this runs/works on a Sunday, Tuesday and Thursday.
I have tried to adjust this to work on a specific date but I'm struggling.
Would I use 'datePart' or just 'Date' and what format in the case would I use.
Thanks in advance
View 6 Replies
View Related
May 19, 2005
I have a table that stores price records with a field for the effective date but there is no field for the inactive date. How can I write a query to return the price for a date that falls between recorded effective dates?
Example: A record exists for 12/03/2005 and the next is 01/04/2005. How can I find the effective price on 18/04/2005?
Thanks
View 2 Replies
View Related
Mar 4, 2008
How can I setup my form print button to print to a specific printer, and then to a specific tray? We need to use different colors depending on the item we're printing. This is possible by changing the printer settings as I print each form, but I'd like a more automated way to do this. Help please. Jolene
View 2 Replies
View Related