Select A Datasheet Row -- Populate A 2nd SubForm Based On That Row?
Jul 12, 2005
Hi,
I'm not even sure if this is possible to do (I havn't found anything on the Net yet), but I have a Form displaying Customer information, and the vending machines that customer has.
The main form (frmAccount) has 2 SubForms:
1) AddressSubForm (is a Datasheet), listing the many addresses the one account has.
2) VendingMachineSubForm (is a Continuous Form) and displays the machines related to the account.
What I want to do is select an address in the datasheet, and have the MachineSubForm populate with what machines are located at that address. Can this be done?
The Machines and Addresses link by AddressID. Both subforms are built on queries.
Thanks for any help/insight!
Mike
View Replies
ADVERTISEMENT
May 19, 2014
I have a subform that is essentially a blank table which users can create rows depending on how many they require and fill the table in.
I then want to be able to append a main table with the records that have just been created in the subform's table... but here is where an issue lies.
Main Table has 6 columns... subform table has 5.
I already have the value to put into the 6th column but Im just not sure how to do it... the value is obtained from the original form.
For each record, copy that record into the main table + adding another value into the extra column.
Is this possible? or doable?
View 4 Replies
View Related
Sep 1, 2007
Hi,
There is a requirement for
1)Populating a datasheet in a subform with a querystring which is dynamically built in VBA.This querystring is constructed based on the search criteria fields selected by the user in the main form.How can this be immplemented?
2_To click/double click a record in the datasheet,extract data and populate textfields,comboboxes with it which are in the main form.How is this achieved?Also,I can't find click events in a datasheet.
Pls let me know.
Thanks,
Savita
View 2 Replies
View Related
Dec 6, 2013
What I have is a form that takes in information regarding test data. Each test run can record data for multiple requirements. I am able to pull all data fine, however in order to make it easier on the user i was hoping to populate the requirements subform based on a selection of "test group" in the main form.
Commonly run together requirements can fall in to groups. I have a selection box for these groups in the main form and a table that stores these group id's and group setup. Is there a way to autofill the tables records that the subform is linked to based on the selected test group?
View 3 Replies
View Related
Mar 2, 2007
Hi,
I have a form with a subform, Both of them are based on a query.the form
displays a productid and its details ,and the subform has matching
productnames for that productid.
Now i have a search on the main form wherein the user enters ( search
for) the productid, once they click search button, the form should show
that particular prod id and details and subform loaded accordingly with
that productid matches...seems simple but how do i code this in VBA??
Basically populating the form and subform with data based on search..
i am using ODBC coonxn with backend oracle tables..
any help would be highly appreciated!
Thanks
View 2 Replies
View Related
May 29, 2015
I have a main screen that has a tabbed form in it. Each of those tabs has a sub-form in it that displays information and allows some information to be updated.
In one tab I have a query based sub-form that returns information related to the project. This information cannot be manipulated or changed as it comes out of a company managed database. I would like the analysts to be able to add more granular information to a new table by inputting information in a dropdown field for one of the new table fields, but utilizing two of the existing sub-forms fields as identifiers in the new table.
View 14 Replies
View Related
Aug 20, 2013
I have an unbound combobox on a form that is used to filter the records of a subform based on who they have been assigned to. The combo box is based off of a query to the personnel table and utilizes a UNION querry to add the option "**ALL**" with a id number "111111" as the first option in the combo box.
In other words: the combo box has a list of names to choose from and the word "ALL" at the top as the first selection. The idea is that when "**ALL**" is selected, the subform should display all records regardless of who they have been assigned to. I'm trying to accomplish this with VBA. I've started developing the code to try to impliment this, however currently when "**ALL**" is selected, I'm getting a datatype missmatch that seems to be caused by my use of recordset.
Option Compare Database
Option Explicit
Private Sub cboTaskListName_AfterUpdate()
'On Error GoTo cboTaskListName_AfterUpdate_Err
Me.Refresh
[code]...
Also once the queried records are saved into the record set, how can I communicate that to the subform so that it displays them?
View 2 Replies
View Related
Apr 30, 2015
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
View 6 Replies
View Related
Sep 16, 2013
I would like to select a record from my combobox dropdown list and have that record populate in my subform. Currently, I am only able to select the 1st record at the top of the dropdown list to appear in my subform. But I would like to select any record from the dropdown list and have it populate my subform.
View 8 Replies
View Related
May 17, 2013
I have a form with a button that pops up a datasheet with a number of records. I need the dbl click event to populate a hidden text field with the id of the item that was double clicked.
Ive found the double click even and can get the double click to close the window, but i need to populate the text field as well.
View 1 Replies
View Related
Oct 18, 2005
When viewing in 'continuous' / datasheet mode - is it possible to highlight the whole row instread of just the cell the user has clicked in?
View 1 Replies
View Related
Feb 9, 2005
I'm working With Access 2002, and have a form with 2-subforms. SubForm-1 is a datasheet which shows a list of records. SubForm-2 shows a list of records in a different table, which are linked to the record selected in SubForm-1. The question is how can I Highlite the entire row in Subform-1 when I click on any field in the row. Is there a way to do this?
Any help would be greatly appreciated.
Thanks
MBeaston
View 2 Replies
View Related
May 6, 2014
I have a subform containing a list of Funds and attributes such as Asset Type, Fund Manager, etc.
Currently, I have a textbox, where the the control source is set so that it will be updated with the Asset Type from the subform.
I also have an unbound combo box that contains a list of Asset Types queried from a table via row source, where user can select the Asset Type.
What I would like is when a record is selected from the subform, the Asset Type is selected on the combo box as a default value. User can select another Asset Type if required. How can I do this?
View 1 Replies
View Related
Sep 11, 2013
The table has PK and city column can be one of several. I need to create a filtered datasheet view (few columns only).
Since there are quite a few cities, I need to select one to display all the records in that city. My questions
Since it is a datasheet view I cannot use Combo Box. What to do then ?
If I use subform with a combo box, and bind the query in the subform with the selected combo text, it does not work.
here is the subform query
SELECT tblClient.ClientName, tblClient.HqCity FROM tblClient WHERE (((tblClient.HqCity)=[Forms]![frmSearchCity]![cboCity]));
I get nothing.....
View 8 Replies
View Related
Aug 20, 2007
Hello everyone,
I have a query that runs from the main form when the command button is clicked. It displays the results in datasheet view. I want the user to double click a specific record and jump to that specific record in the main form. How do I do this? Sorry, if this is a dumb question. Please help, my boss is breathing down my neck. :eek: The main form is called Contracts. Each record has a unique ID.
Thanks,
Jason
View 11 Replies
View Related
May 14, 2013
I have had to place it in a zipped word document that is attached.
View 6 Replies
View Related
Oct 1, 2013
I'm trying to do the following.
I have a text box named Last_Check on a form.
On that form load I want to use the following SQL statement to populate that text box.
SELECT TOP 1 tbl_QA_Check_Sheets.Machine, tbl_QA_Check_Sheets.The_Date, tbl_QA_Check_Sheets.Time
FROM tbl_QA_Check_Sheets
ORDER BY tbl_QA_Check_Sheets.ID DESC;
can't get it to work.
View 11 Replies
View Related
Nov 6, 2012
I would like to be able to select a value from a drop-down and by doing so be able to populate three fields in a table.
View 12 Replies
View Related
Apr 24, 2013
In my quality control database QC techs will be entering in test results. Each quality control entry they put in will have a product and lot number it is related too.
My question is about making data entry easier for the QC techs. When two jobs are being run at once, the techs may have to alternate between which jobs they enter, meaning a different product and lot number. It would be frustrating for the QC techs to enter in a product code and lot number for every entry they make.
Can the lot number field be automatically populated when the tech selects a product? Basically, if the tech selects product A, can the last lot number value for product A automatically populate the field in the new entry?
Edit: Currently I have the "solution" of making two instances of the entry form with each lot number entered on the different one. This allows the QC Techs to use the CTRL+ ' to populate the last record, allowing them to quickly enter the product code, lot number, and date of the job they are working on.
View 3 Replies
View Related
Sep 19, 2014
I am looking to have a combobox on a unbound form to select a product code (this i can do). However I want a textbox to auto populate with the description as well - both in the same table tblproducts - product_id, pcode, pdesc....
View 4 Replies
View Related
Jul 11, 2006
I have a form and a datasheet subform in Access. A form has person info and datasheet subform has 4 fields: QuestionID, QuestionNumber, QuestionName and Answer fields. The Answer field is a dropdown field and has 3 items: Yes, No and N/A. If QuestionNumber from 3 to 6 the answer was Yes or No then lock the Answer field in Question 7. Any idea how to do it?
View 1 Replies
View Related
Apr 9, 2013
I have a simple SELECT CASE query. I'm not sure how the syntax goes and I want to learn about it.
In the attached file, if you click on "cohort table", you will see the categorization for each unit under "field1".
how will I be able to use a SELECT CASE statement in a query to populate each unit with assigned category?
View 1 Replies
View Related
Jul 17, 2006
Hi. I am trying to create subform in datasheet view with one column (total 3)as drop down list. Is this doable? Thanks.
View 3 Replies
View Related
Jan 23, 2005
I have a form (Main) with a subform (MainSub) set as a datasheet.
The main form holds details of employees and the subform holds targets and dates for the employees.
the subform has 4 fields, Target, StartDate, EndDate, AchieveDate.
What i would like to do, is show the date of the target that was achieved last on the main form.
For example,
Joe Young has 3 aims, 2 of which are complete and 1 which is still ongoing.
Joe achieved his targets on 31/11/04 and 31/12/04.
On the main form I would like to show a control called 'LastTargetAchieved' as 31/12/04.
If I am not making myself clear I will see if I can get a sample uploaded, otherwise, thanks for any help.
View 2 Replies
View Related
Jan 5, 2006
I have a subform that is in databsheet view. When the user logs in to the db it sets the global variable with the group level they have.
I would like a column to be hidden for a certain group of users and have tried the following.
On the subform opening event i have
if vlevel = "engineer" then
me.Hours.columnhidden = True
Else
me.Hours.columnhidden = False
End If
And i have done the same on the Main Form open event identifying the subform by Form!Subform![Hours].columnhidden = True
But neither worked.
Can any suggest something.
View 4 Replies
View Related
Jul 25, 2006
Can anyone tell me how to manipulate a single cell in a datasheet view, or if it is even possible?
View 3 Replies
View Related
