Select Which Column To Use
Jan 10, 2008
I could probably do this with 2 seperate querys, but I want to know if it can be done with just one.
I have a query which builds a username based on LastName, FirstName
That same query pulls out the Role of that person.
Currently the first column of the query has Role, and the second has the username expression.
One of my forms uses this in a drop down box that gives a Role, and the person attatched to that role.
On my login page i wanted the samething but without the Role.
Is it possible to just select the second column of the query?
I've tried setting the bound column to 2, but this doesnt work.
View Replies
ADVERTISEMENT
Sep 14, 2005
Hi
Can someone help me to change the following select?:
SELECT avdeling_nr,aar_nr, Sum(Arbtid) AS SumAvArbtid
FROM tblFerdig
GROUP BY avdeling_nr,aar_nr;
The table tblFerdig contains the columns mnd_nr and uke_nr. I want to be prompt to select aar_nr, mnd_nr or uke_nr.
something like this:
SELECT avdeling_nr,[input], Sum(Arbtid) AS SumAvArbtid
FROM tblFerdig
GROUP BY avdeling_nr,[input];
Can someone help me?
eroness
View 3 Replies
View Related
Sep 1, 2004
Hi,
I am trying to create an ASP script that I can use to take the column names out of my access database, and then take out the data. I have a select statment like this:
Code: <%Set conn = Server.CreateObject("ADODB.Connection")conn.open "source","",""SQL_query = "SELECT * FROM table"Set RS = conn.Execute(SQL_query)%><%WHILE NOT RS.EOF%><%=RS("field")%><%RS.MoveNext WEND%>
I would just like to make it so the above script just takes out each column header from my database table, and instead of the <%=RS("field") it shows the current column name.
Thank you for your help,
~David
View 5 Replies
View Related
Sep 30, 2005
Is there any way to use a select query where it will select the values off of my database but temporarily use a different column name for one of the columns???
I have 3 different item names stored in my main table. When I compare this to another table, I want to select one of the item names and just pass that as item_name. This way, I can have the same compare routine instead of writing a different compare routine for each item name. Any way? Thanks a lot for the help in advance!
View 1 Replies
View Related
Jul 22, 2013
Code:
strSQL = ("INSERT INTO " & strTable & " Select c.OrderNumber, c.Item, c.RepId, p.ProductNbr, p.Name, [tbl_LBP_Sales Location Num].[Rep Region Code] FROM CalculateTotal c, dbo_PartNew p, [tbl_LBP_Sales Location Num] WHERE ([Structure] like '*" & u & "*') AND ([ProductNbr] = '" & txtPartNumber & "')")
CurrentDb.Execute strSQL
It keeps giving me this error and I don't know why?...
I tried replacing the brackets around Rep Region Code with quotation marks as well as these things `` but kept getting the same error...
View 3 Replies
View Related
Nov 4, 2005
Hey, I know this is probably a simple thing to do, but I couldn't find it anywhere on the web so hopefully someone here can help.
I have a column of UPC codes which are a bunch of #'s. I need to find the ones that have more than or less than 12 characters.
Thanks
View 2 Replies
View Related
Feb 6, 2015
I have two listboxes. One for Activities and the other for Organizations.
I set the Org listbox to be multi-select so I could run a loop on that listbox to join multiple Orgs to a single Activity. That part works well.
To do so, I am using the bound column (which is the pkey value) from the multi select listbox, and on the single select listbox I'm using the ListboxName.value to gather the pkey for the "1" side of this 1:Many series of inserts.
Now... I want to use one of the other-than-bound-column value from the multi-select listbox, but I don't know how. When setting a value I only know of the use of :
Code:
ListBoxOrganizations.ItemData(varItem)
and I don't know how to do the equivalent of
Code:
ListBoxOrganizations.ItemData(varItem's column(2).value)
yes, I just made that up, but I hope you get the point. Meaning, as the loop cruises the ItemsSelected on the multiselect I'd like to use other than the bound column when setting variables.
I've tried using the column property to then cruise to the proper record in the listbox, e.g. :
[code]
txtCollaborationDesc = "Collaborate " & ListBoxOrganizations.Column(2, varItem) & " with " & listboxActivities.Column(2)
[code]
But this seems to return the column(2) value of the first record loaded into the list box, as if the varItem piece is being ignored. I believe the loop is working properly, as when the inserts are happening correctly with the bound column of the multi-select list is correctly present as an Fkey in the resulting child records.
I just can't get any other column's value for some reason.
MS Access 2010 and this is an accdb.
View 3 Replies
View Related
Aug 28, 2013
I have a SELECT INTO query that pulls info and drops it into a table, after deleting the target table and making it anew upon insertion of the selected records... Is there some way to accomplish the same feat without deleting the target table, so I could retain the target table's fields/field lengths?
I would first set up a target table with fields of specific lengths, and when the data is inserted, the data that fits would insert into these fields, and data that didn't would be truncated..I guess my problem is that when the new table is created it makes all the fields string 255 which is too long when I goto export the data, without having to clip/trim the data for use.
View 4 Replies
View Related
Dec 12, 2012
So I have a list box that lists organizations. I recently changed the list box type to extended multi select. On the same form, I have a button that opens a new form where the user can input contacts for each organization. When the list box was not multi select, the expression [forms]![media]!
[List30] made the default value of one of the fields in my contact form the bound column from the selection in the list box. However, now that the list box is multi select, the contact input form does not seem to be able to get the value from the bound column in the list box. When multi select is turned on, is the bound column stored differently.
To even get the contact input button to work, I had to change the code from:
Private Sub Command40_Click()
On Error GoTo Err_Command40_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Contactsqry"
stLinkCriteria = "[Organization ID]=" & Me.List30
[Code] .....
View 14 Replies
View Related
Nov 3, 2014
I was just wondering if this is a possibility to do in one query or if it has to be run from a number of different queries.
I am currently developing a database from scratch for work (with very little Access experience).
The current query I am trying to run, if linked to a number of tables with different information.
What I am trying to do primarily is link stock to a specific "Host Name", "Serial Number" and "Part Description".
In the "Host Name" there is for example - A1-TX10-10001, B1-TX2-10004, C1-TX-10004 - The latter part of the name is a unique identifier number. The first part is the compartment in which the "stock" sits. So you may have all three components (A1-TX1, B1-TX2, C1-TX3) linked to the same unique identifier (10001 for example)
The serial numbers naturally are different for every single one and of course the srial numbers are linked to the "Part Description" - which will read something like....."C1-TX3 Transmitter", "B1-TX2 Combiner" etc.....
When I run the query like this the Host Name (which is also linked to the unique identifier on its own (10001) it returns everything under "A1-TX1-10001"
What I would ideally like to do is write a statement so that if the "Part Description" contains "A1-TX1" it will only return rows that contain "A1-TX1" in the Host Name and the same for "B1-TX2" and "C1-TX3" in the same query.
If "Host Name" contains "A1-TX1" to return "Part Description" to contain "A1-TX1"
View 10 Replies
View Related
Mar 2, 2014
Basically, I have a database table that is maintained every week. It is about e-mail account licenses for Office 365.
Each column represents a week of license data for every mailbox account which is about 10 000 plus users with the date as the field headers( something like "License information as of 06122013").
Basically, I have created 52 queries based on the license type I require to be calculated & I have a form created to control it. However, right now it is all output only as I have yet to create any user parameter to specify on any of the queries about the date I want
As I am currently unsure how to specify all the queries to use one field date header which I want the user to specify via drop down list in order to calculate all the licenses on this specific date.
For example, if I want to see the license information for 06/11/2013, I would choose "License as of 06112013" & it would then run all the queries based on the header specified earlier & output that information on the form.
Right now the queries are all configured as the "Select" type.
View 1 Replies
View Related
Apr 3, 2013
How do I select the first column of a multi-column list box (called "List1") for a query.
A single column list box works fine.
Code:
SELECT Tble_Employee.Emp_No, [forms]![attendee_form]![list1] AS SelectedCourse
FROM Tble_Employee;
View 6 Replies
View Related
Sep 24, 2013
I am trying to run a simple update query to copy data from one column (Addrl1)to another column (Working_Addrl1) within the same file and I can't for the life of me figure it out. Then I need to repeat for addrl2 and addrl3 to working_addrl2 and working_addrl3.
View 7 Replies
View Related
Mar 5, 2007
Hi all,
In the organisation that I work for employees get paid every 2 weeks on a Saturday. So for this financial year the pay period end dates have been 08/07/2006, 22/07/2006, 05/08/2006 etc
I have a column in an Access table listing various dates. I want the next column to be
populated with the next pay period end date after that date.
So if DATE is 05/07/2006 I want PAY PERIOD END to be 08/07/2006
and if DATE is 09/07/2006 I want PAY PERIOD END to be 22/07/2006 etc
How do I do this?
Kind Regards,
Matthew
View 1 Replies
View Related
Mar 24, 2014
I have created a cross tab to extract pipeline and sales for Q1 2014, Q2 2014, Q3 2014 & Q4 2014... the user can select the quater from a multivalued text box...
Now for the final output, have created another query which pull the above four quarter in each column from the cross tab...now the problem arises when i change the quarter to Q2 2014, Q3 2014, Q4 2014 & Q1 2014..it gives an error "Microsoft office Access database does not recognizes "Query name" as a valid field name or expression".
The error is because the second layer of query does not identifies Q1 2014.
How do i make access change the column automatically when the Q1 changes to Q2...
View 1 Replies
View Related
Nov 30, 2014
I need to input a string into a column named "EventType". The code should first check if the column "Agent Name" contains any strings. If there is none, it will input "IBM Director" into the EventType column.
Once it has looped through the agent names, the code will then loop through the Details column and input into EventTypes based on what is displayed within the string.
These are the codes that I am using to achieve this, however nothing is being input into the EventType column.
Code:
Private Sub Command11_Click()
Dim dbs As DAO.Database
Dim rst As DAO.Recordset
Set dbs = CurrentDb
Set rst = dbs.OpenRecordset("Final")
[Code] ....
I think the problem lies with the code that checks the agent name. When I removed it, it managed to populate the EventType column based on the details. But I still need to find out how to check the agent name too.
View 4 Replies
View Related
Nov 16, 2013
i have a columns as 1. contactname, 2. firstname 3. lastname 4. email and in this columns some emails are not matching with the contactname or some time firstname or some time lastname so i need the to find out the un matched contacts from the database.
View 1 Replies
View Related
Apr 23, 2015
I have a multi slect list box (simple) and I need to find and select an item using vba - e.g., the bound column is the ID field and I need to select a specific ID (which will be different each time) as opposed to selecting the 100th record for example. How do I do this?
View 2 Replies
View Related
Dec 14, 2006
hi,
im wanting to reference a value of a dropdown which is already serving a function - the dopdown already has it's bound set to 3 but i want this new function to refercne the second column-
im tyring:
"Tutor = '" & Me.ComboStaff.Value(2) & "'"
which isn't working- how do i reference the second column of a dropdown if its bound to its third?
cheers
dubs
View 2 Replies
View Related
Feb 25, 2008
Hi. I have a question I'm hoping someone can help me with. I would like to take data from multiple columns and put the data into one column. Additionally, I do not want to exclude any data (union all) and I would like to group the resulting union by another field. For example:
Original data layout:
Column Headings: Sample Event, Depth 1, Depth 2, Depth 3,
1st Row Data: 1, 6, 9, 12, 9
2nd Row Data: 2, 7, 9, 8, 3
Desired data layout:
Column Headings: Sample Event, Depths
1, 6
1, 9
1,12
1, 9
2, 7
2, 9
2, 8
2, 3
So far I'm using the following SQL. What do I need to add or change to get my desired result of grouping the unioned depths by the 'sample event' field?
I appreciate any help anyone may have to offer. Thank you.
SELECT Depth1 AS Depths
FROM Depth_Velocity_Substrate_Correct
Union all
SELECT Depth2
FROM Depth_Velocity_Substrate_Correct
Union all
SELECT Depth3
FROM Depth_Velocity_Substrate_Correct
Union all
SELECT Depth4
FROM Depth_Velocity_Substrate_Correct
Union all
SELECT Depth5
FROM Depth_Velocity_Substrate_Correct
View 5 Replies
View Related
Feb 28, 2014
I want to convert a number column into a text column.
Number Column is called Customer.
Below I can't match to the other table containing the text column Customer No.
How can I convert columns in vba?
Code:
strSQL = "SELECT CALCULATED_Forecast_TNS.*, USEFUL.TRP_in_EUR " & _
" FROM USEFUL INNER JOIN CALCULATED_Forecast_TNS ON (CALCULATED_Forecast_TNS.[Reference No] = USEFUL.[Reference No]) AND (USEFUL.[Customer] = CALCULATED_Forecast_TNS.[Customer NO])"
Set qdf = CurrentDb.CreateQueryDef("REPLACABLES", strSQL)
DoCmd.RunSQL "UPDATE REPLACABLES SET CALCULATED_Forecast_TNS.TRP_in_EUR = USEFUL.TRP_in_EUR"
View 1 Replies
View Related
May 21, 2015
I am looking to add a column in a query that will give a Y or No to previous column data if it contains TEXT or NUMBER (It could read "TEXT" or "NUMBER" or even Y for text or N for number).
View 3 Replies
View Related
Jan 30, 2014
In my table for duplicate "line no" I have different "contractor" like below.
LINE NO CONTRACTOR
L-0001 C-1000
L-0001 C-2000
L-0003 C-6000
L-0003 C-8000
L-0003 C-9000
L-0004 C-5000
Now I would like to make a query for transposing values like below:
LINE NO CONTRACTOR1 CONTRACTOR2 CONTRACTOR3
L-0001 C-1000 C-2000
L-0003 C-6000 C-8000 C-9000
L-0004 C-5000
how I have to make this query?
View 1 Replies
View Related
Dec 4, 2011
I have this table ("people") and an example of possible rows:
id(key) COL 1 COL2 department country name
1 xx yy KPP USA John
2 zz kk KPP USA John
3 ss ff TLL USA John
4 ww qq PPO Italy Marco
5 jj uu PPO Italy Marco
I have to count the number of distinct DEPARTMENT for each NAME; so, for John should be 2 (KPP and TLL) and for Marco 1 (PPO).
I have tryed in this way:
SELECT
COUNT(DISTINCT department) AS NumberOfDifferentDepartments
FROM people
GROUP BY name;
But Access says me there is a syntax error.
I'm working with MS Access 2002.
View 2 Replies
View Related
Aug 18, 2011
I have a Access 2003 file and I want to filter anywhere where there last name is "expired" and change the column first name to say "no". How do I do that?
View 1 Replies
View Related
May 6, 2014
I have a subform containing a list of Funds and attributes such as Asset Type, Fund Manager, etc.
Currently, I have a textbox, where the the control source is set so that it will be updated with the Asset Type from the subform.
I also have an unbound combo box that contains a list of Asset Types queried from a table via row source, where user can select the Asset Type.
What I would like is when a record is selected from the subform, the Asset Type is selected on the combo box as a default value. User can select another Asset Type if required. How can I do this?
View 1 Replies
View Related
