Each record in the database has a subform (one to many relationship) with multiple records. When the user clicks on a record in the subform I want the information from the subform and from the mainform to go into a Word document. I am able to pull the data from the main form but not from the sub form. Any suggestions would be appreciated. Below is an example of what I am using to get the data out of the main form for the bookmark in Word called "ClientName".
I have two subforms on a main form. Both use similar queries and nearly the same set of records and PK. The first subform is for data entry and the 2nd subform is a continuous form that lists the entries in order that are made from the 1st Subform. (for entering in vacation days and appointments)
The continuous form cannot be edited, it is to be a list for viewing the information only.
I have an edit button next to each record on the continuous form. When the button is clicked, I want it to take the 1st subform to that specific record as well (same PK), so the information can be edited there.
I cannot figure out how to get the 1st subform to go to the record on the continuous form when the button next to that record is clicked on the continuous form.
I tried the DoCmdSearch for record and just keep getting object is not open errors.
Hi All, What is the easist way to select a column's value in a subform. After the record is selected I would like to write a value ("0") into this column by way of a button click..
I have a main form which has 4 combo boxes all based on tblPeople. Combo0 is skill Combo1 is discipline Combo2 is crart Comb03 is active
The sub form is a datatable list of the tblpeople.
How do I apply the filter to the datatable. I am assuming I need to build a sql statement somewhere like SELECT from tlpeople WHERE me!combo0 = [tblpeople].[skill] and me!Combo1=[tblpeople].[discipline] etc
Is there a sample database? or can somebody tell me how to go about this.
I've got a subform that im writing code for, once a user enters a value in one of the fields i want to make sure they cant change that field (and two other fields in that same record, though the rest of the fields are fine to edit at will)
I've got a function already written to validate the data in the record and decide whether or not the fields are enabled and disabled, however im having trouble finding an event in which to activate the function
Is there an event that triggers whenever a user selects a different record?
Any chart or list with all the handlers and how they trigger (in relation to each other) and when?
My Database is really simple, it contains 1 table (called Querys) and a form called Dashboard.
In my main form (Dashboard) I have inserted a sub form which shows all the records in my table (called Querys) when I use my main form and add a record this sub table can then be refreshed and it shows all my records.
This part is fine,What I would like to do is be able to select a record in my sub form and it show the record data in my main form. This would really speed up the navigation process as the database gets bigger.
umm.. i have a form with a combo box which is linked to a table which gives me customer id numbers. and i have a listbox which i want the names and addresses to appear when i select a cusotmer id number from the combo box
so on the list box i put " SELECT CustName FROM Customers WHERE CustID=$combo43; " in row source; if i change $combo43 to 0 the name appear but that is fixed and i want it 2 change when i select a cusomer id number from the combo box
im trying to select data from an access database via asp. the data must be stored in a recordset and fit the criteria as given in the variable varItemSelected:
heres what i have
SQLstmt = "SELECT * FROM Products WHERE product = " &_ varItemSelected
set rs = con.Execute(SQLstmt)
but i get the error: Microsoft JET Database Engine error '80040e10' No value given for one or more required parameters
I have a database which records time spent on various projects and I would like to be able to calculate the time spent on any particular project between two selected dates. The report and the query behind it already works to display the time accrued on all the dates of a project, but I want to be able to break it down to small ranges of dates
I have a form on which the user selects the start date and the end date. How can I apply this calculated information as a criteria in a query so that I can produce a report with the relevant information on it.
I already have the report and the date selection form designed. The dates selected go into two unbound fields which have a date format.
I have data in a table I am extracting using an append Query, I wish to assign a number from the original table +1 to the records pulled by the append query. I am very new to this and have the expression below, however the result is #error in created field CertifNumber The data I am looking for is in table Sample Details and the Field is CertNo
Hi, I have 13 tables in all. 2 are Area and Scope which have unique entries of areas and scope and the remaining 11 will have a primary key, Tag_No. I want to select data from these 11 tables such that ALL the data will be pulled out but say table 1 has a column MOC and remaining 10 tables dont, then it will be a blank or null in those columns for the 10 tables. How can this be done? (I hope I am not confusing!!!) Adwait
I am having trouble writing what I think should be a fairly straight forward query... I am have a table with 2 fields, the first contains a list of subjects, the second contains a list of scores that students got in their tests in that subject.
So the data looks like this:
Maths 54 Maths 69 Maths 41 English 71 English 55 Art 44 Art 43 Art 66
I would like to write a query that selects only the highest score for each subject and presents it like this:
I am constructing a database for a friend and need to filter data from a daily log to enable a report to be generated for each months actions. I have created fields of: entry date, month and year with the view of filtering by month and year. How do I perform this task?
I would like to create a excel file to let the user to input the following column.
Date No. of success No. of failure ==== ============ ============== " " " " " " " " "
I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure
For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?
if the data is very large , I want to create a access db to store it , how to do it ?
I would like to create a excel file to let the user to input the following column.
Date No. of success No. of failure ==== ============ ============== " " " " " " " " "
I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure. For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?
If the data is very large , I want to create a access db to store it, how to do it ?
I have an on click event to mail a report which works. I want to change the text to include data from a table.
I changed the code to include the field 'office' from the table 'Checks' but get an error saying 'Object required'.
Code is : Private Sub cmd_mailreport_Click() Dim office As Object Set office = Checks.office DoCmd.SendObject acReport, "checks", "PDFFormat(*.pdf)", _ "info@company.com", "", "", office & " Daily Check - " & Date, "Attached is the report for the office", _ True, "" End Sub
I have with my database. It's holds cost data including purchase made in foreign currencies which need to be converted to GBP using the correct exchange rate so a variety of reporting & stats can be performed.I have a table called Costs within which there are 2 fields
Purchase Currency Exchange Rate
I also have another table called Exchange Rates 13/14 within which there are 2 fields
Currency Exchange Rate
When a value is entered in the Purchase Currency field on the Costs table (this is a look up field linked to Exchange Rates 13/14 so it shows the listed currency in drop down) I need the database to automatically populate the Exchange Rate column in Costs i.e. match the value in the Purchase Currency field to the Currency field in Exchange Rate 13/14 and populate with corresponding Exchange Rate from Exchange Rate 13/14.I have tried the following and none work:
SQL Tried
1. UPDATE Costs SET ExchangeRate = [Exchange Rates 13/14].[Exchange Rate] WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
2. UPDATE Costs SET ExchangeRate = [Exchange Rate] FROM [Exchange Rates 13/14] INNER JOIN [Exchange Rates 13/14] ON Costs.[Purchase Currency] = [Exchange Rates 13/14].Currency
3. SELECT [Exchange Rate] FROM [Exchange Rates 13/14] WHERE Costs.[Purchase Currency] LIKE [Exchange Rates 13/14].Currency
I know it is possible to have a drop down for Purchase Currency which shows 2 columns (both Currency and Exchange Rate) you can then use the exchange rate figure for a calculated field. The problem I have is that I am importing data into the costs table from excel. In Excel I can only have 1 value in the Purchase Currency column on the upload template. If I just have Euro in this column the database does not match it to the Euro in the Purchase Currency drop down and also store the correct exchange rate.
Or is the alternative to put this into the calculation of GBP Unit Cost where this somehow matches the Purchase Currency in the Costs table to the Currency field in Exchange Rates 13/14 tables and uses the appropriate exchange rate from Exchange Rates 13/14 to calculate GBP Unit Cost in Costs table.
I have staff table which is a lookup field on the phone call table.when the phonecall form opens I want the employee field to auto fill in the employees name from the lookup field according to there security level.so something like this
On Open Select Case Forms!frmLogin!cboUser.Column(4) Case X = 4'the employees security level' Case X = Insert Table_tblPhoneCalls!EmployeeID"4" into Form_frmPhoneCalls!Employee. End Select
of course this is a syntax error as I do not know the correct code words.
I created a subform that displays the records of a select query after selecting the desired data from a single combo box (for instructors name) and then using an OpenQuery macro attached to a button.
Only 1 record is displayed in the subform each time I hit the button. If I look at the query return there is no change. However, if I close the query and select a new instructors name, although I only get one record in the subform, the query when opened shows all the correct records.
I have a data entry subform that is only supposed to show an empty record ready to be populated, and a display records subform that is supposed to show all the records. The subforms are both on the same tab of a tab control on my main form.
Problem 1: The data entry subform shows all the records rather than a blank record. Something on my main form is causing it to show the records when it should not. Any ideas? The Data Entry is set to Yes.
To try to isolate the problem, I created a new form and added the subform to it where it behaves properly:confused:
I then added Me.DataEntry = True to the form open to see if that would solve my problem but it still sets the data entry to no.
If I have the properties box open when in form view of my main form, I can set the data entry to Yes and it works fine until I move to the next record of the main form when it resets to no. Teraing my hair out here.:mad:
My final attempt was to search the entire project to see if there is a "DataEntry = False" somewhere but there isn't. What is setting this property? Any ideas where I should look?
Problem 2:
After entering data in the first subform (data entry form), I want to re-query the second subform but I just can't get the syntax right. I have wrestled with the "Syntax for subs" document downloaded from http://www.mvps.org/access/forms/frm0031.htm (Microsoft MVP site) but to no avail.
My main form is called fdlgPrjDetails, the data entry is via fsubPrjCommentsUsersDataEntry and the subform I wish to requery is fsubPrjCommentsUsers.
None of the attempts below worked giving a cannot find control error.
Private Sub Form_AfterUpdate() On Error GoTo ErrHandler
i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only
Would like to be able to update a text field on the main form with information from a dropdown box on a subform when the subform data equals a certain value. Would like the main form field to update as soon as the subform information is selected from the dropdown box.
Example (sorry don't have code for it)
Mainform field = Mytext Subform dropdown field = Newtext1, or Newtext2, or Newtext3
If Newtext2 is selected on subform, I would like Mytext to immediatly show the value in this field (mainform/mytext). Do not want either Newtext1, or 3 to ever show in Mytext but want it to remain in subform field
It can either be on Lostfocus from subform or onupdate from subform, etc.
Whatever works best/easiest Thanks for the help in advance
