eg.
file 1 => send to a@hotmail.com
file 2 => send to b@hotmail.com
file 3 => send to c@hotmail.com
file 4 => send to d@hotmail.com
file 5 => send to e@hotmail.com
send them at the same time, but different address. Can they do that?
I think that it cannot be done this way, right.
I think that it only send a file at a time, right.
Please let me know. Thanks.
Thanks.
The query Q_CurrentJobs is a list of jobs to send to the tech for today. (These are open jobs queried).
I need to run this query on the report (R_CurrentJObs) and send the report to each tech based on their individual jobs. The jobs are connected to each tech by its TechID.
The report list the job information for each tech (JOb number, Location details etc.)
When I click the button to send the email. I want to email each tech individually based on the Q_CurrentJobs query using R_CurrentJobs. (DoCmd.SendObject)
the code below sends 3 reports to a folder that the vba creates if needed. I would like to change it so the 3 reports go to different folders and creates a folder with the customer name in each of the below folders if needed at present it looks table with one folder address is as I dont know how to make it look up the 3 different records in that table so I would like to just put the 3 folder address in the code
I have a database which has several records with at least 5 documents needing to be attached to each record. Using attachments or OLE would cause considerable bloat, so I opted for hyperlink fields for all the document types necessary to save with each record. However, now I am faced with an issue. It is easy enough to write code to open the files by following the hyperlinks, as well as write code to send an email, but how would I go about combining the two? I need to write a code that will attach these documents to an email, as attachments and not as hyperlinks. I know with excel documents, I could follow the hyperlink and send the document by email through excel, but I also have images converted to pdf's that need to be sent as attachments.
I can see how to iterate over all the controls to find the Tag collection, then do something with it.
Problem is that since I know the name of the tag, I just want to do something with it (height, visibility, etc). But I can't figure out how to reference a tag directly without iterating over all the controls.
We have a query that pulls information from four tables. What we need to do is do a query or something else to pull the data from the existing query into a table/excel file. The problem we are having is that we want just one record for each person with all of their class selections in one field. Is this doable?
=DCount("*","[Personnel Information]","[prp-requires replacement] = -1"&"[PRP Position Status]='Certified' or 'postured to PRP position'")
is what I got and obviously having issues with. I basically want to count who has prp requires replacement check that are currently certified or postured.
I have one problem I can't seem to get to the bottom of. I have a database that counts the attendance of my basketball team. Everything works great but I have one problem. Our basketball program is 12 weeks for each student. Now students can join any time but all of them are required to stay 12 weeks to complete the training. How do I get Access to tell me how many weeks a student has left in the program? As i was saying it is easy for me to add together the days of the week that the student attended, but I can't seem to figure out how to get the amount of weeks a student been attending. One more thing, I know this is asking alot but is there a way to have an extra column that allow me to add additional weeks to certain individuals (for the students that like to skip a week or to)?
I have an Inventory database with 2 tables. Here is a simplified version of both tables:
First Table is Inventory: Fields are ID Description PackSize PackCost
Second table is PriceHistory: Fields are ID InventoryID Date PackCost
Fields are joined, one to many (one inventory record can have many prices in its history). ID in the inventory table is joined to InventoryID in the PriceHistory table.
The problem comes when I am browsing records in FORM VIEW of the inventory table:
As I page through the inventory records, I often see the same record multiple times (once for each entry in the pricehistory table).
For example, if the item POTATOES in the Inventory table has had it's price updated 3 times (3 entries in the PriceHistory) table, then I see the Potatoes record 3 times as I am browsing.
I only want to see this record once (with the latest price) when I am browsing the Inventory table in form view.
I have searched all the forms but could'nt find any answer which would help me , I have created a listbox , it works fine till the moment i set its 'Multi select' property to SIMPLE or EXTENDED , the minute i do that i get no results in my query , could someone please help me with this , i really really need to get this workin!! I have also uploaded my database so u could try it yourself...
I have now opened it in Design view and wish to adjust the width of the controls - text boxes etc but when I try to adjust one, all of the text boxes in that column are adjusted.
I want to add to every row a combobox with a list of towns depending on the value in the field Country ID.how do I filter the comboboxes individually based on a value in another field on the same row?
I have to write a code for my database,i have folder with files "pending Review" and a table with column "tblExcelLocation". when i run my database all the files from pending review folder goes to "tblExcelLocation" on a click of button.But,if the files already exists it should not insert those files and insert the rest.For this i tried to write a code but i think i m unable to do that .
Code: Loop through files in folder folderspec = "O:QA FilesQC ReportingPending Review" Set fs = CreateObject("Scripting.FileSystemObject") Set f = fs.GetFolder(folderspec) Set fc = f.files
Every hour a zip file is created in an FTP folder. The zip file contains an .mdb access database file with any changes to the data since the last hours file.
What is the best method to get access to connect to the content of the zip files and pick up the changes to the data?
Is there a way to tie a send object to a combo box on a form? I know I can write a query to pull information from a selection in a combo box using the [form][formname]thing. What I'm trying to do is I've created a database that allows many users to enter a request in a form. then when the form is complete they need to E-mail the form to their respective manager. I want them to choose from a combo box, then click on a button and the form is e-mailed to their manager for approval. I've gotten everything else to work accept for being able to choose the manager. I know I could also leave that blank and it will ask for them to enter the recipients name. If that's my only option I'm ok with that.
Thanks
PS If this issue has already been addressed I couldn't find it.
Technical Information (for support personnel) Error Type: Server object, ASP 0177 (0x800401F3) Invalid class string /newslettercreate.asp, line 22So, the letter can not be sent.
What is the ERROR of “Server object, ASP 0177 (0x800401F3) Invalid class string” ?
My OS is winXP pro, email program is Outlook Express. Who could help l me solve this problem? Thanks!
Hello! I am currently trying to devellop a DB for stock management. I would like to allow the DB to send me a message (like a 'net send') to warn me if an item of stock is runing low i.e. if part n. 123 is less than 10 in stock the DB sends the message. For this to work I must also have the users decrease the stock items as they take them out. Would any of have any suggestions? Thanx
I have a contact database which store email address and other info for customers. I have searched and searched. How can I use these email links to open and email to the contact? Such as how to email you@there.com from DAP or Form? So the user can click on the email address and auto open Outlook to send that contact an email? This is so much easier in webpage building :o Any direction would be greatly appreciated. Thanks guys :)
Is there a way to send another user a message within Access? (Like "Instant Messenger" or Lotus Notes "SameTime") If you have any experience or info I would appreciate some info. Thanks in advance!
I am creating a recruitment db for 6 members of staff, I have created a form (add new vacancy). Within the form is a various drop down boxes where you can select each employee and drop down box to pick which company want a vacancy filling. What I wanted to do is when a new vacancy is put on the system, and the administration team select save record is it possible to email the employee to let them know a new vacancy has been added, and also email another administration department to send the employee a suitable candidate list with the information provided on the form. Or am I asking far to much from access. The two fields that are most important is who the vacancy belongs and which company want the vacancy. The db is available if you require a look to have a better insight. Thanks for all your help.
I'm playing with my DB a bit and I need help in determing which way to go. When I print out labels for Envelopes or directly on envelopes, sometimes I have people living on the same address (a family), so I would like to save some on printing and actually sending several envelopes to the same address. Now, I was thinking of doing this through the code in VBA but now I'm thinking if there is maybe more simple and faster way in building a qry.
All the data for the labels and envelops comes to a temp table from where I'm printing out reports...so what I'm not sure, is there a way to make a querry which would go through my temp table sorted by address, pick address1 then address2, if they are the same, check if lastname1 and lastname2 ise the same and then name1=name1 & Name2, delete record2 and go on...
I have a situation where two clients will be using the same database design - one of them will be sending information from his database for the other client to add to their database.
This will be on a record by record basis. The form that has the info entered into it also has a subform.
How do I export a single record between databases that have the same fields? I know how to export a table, but not a single record. The fact that the record that needs to be sent is from two tables (ie the main form and the subform that collects the data for those tables) further complicates things for me. Any ideas? :eek: