I have a field that consists of a combo box with 8 items in it. Each of these 8 items is a label for a type of income. I also have a separate field that is the amount of income. Is there a way to show on a report the 8 types of income as 8 columns, and separate the amounts of income into the correct column? I know this involves a query, but I'm not sure where to begin.
View RepliesI have a query which displays only the records that match the criteria in the form given before. Now i want to create separate report for each of these records. How should i go about with it? I don't want a seperate form for this purpose, is there any way to do the same with a macro?
View 1 Replies View RelatedI've created a custom ribbon and it works great however I want to create a separate ribbon and attach it to the report. On this particular ribbon, I'd like the export to excel, export to word and print functions to appear ONLY for reports. Not all reports will need to be exported; it depends what the user does. I've created this XML and I'm not receiving any error message. It loads as expected but my group is blank/empty. Still confused.
View 2 Replies View RelatedI have a database of musical events. Now im creating flayers for each event. My Q is how the Information for each event should fit on one A4 page and should start on a new page of the report.
View 2 Replies View RelatedThe main issue I'm having is trying to populate a text box based on a combo box selection. I've found threads on that - the twist that is throwing me for a loop is that I'm dealing with two different forms.
I have a main/welcome form with two combo boxes on it. Based on the user's selections in these two combo boxes, two different forms are opened for data entry. For instance, box 1 has A, B, C and box 2 has x, y, z. If a user chooses B and z, then form B and form z are opened. What I want is for a text box to be populated on one of the opened forms, not the same (main/welcome) form. In other words, when B and z are chosen, I would like there to be a textbox autofilled with "z" on form z.
How do I stop the report footer from printing on a separate page. I have seen several suggestions but nothing seems to work.
View 1 Replies View RelatedTrying to make this code work, don't know how to filter as it prints identical all reports.
Private Sub cmdExportPDF_Click()
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim MyPath As String
MyPath = "C:Reports"
If Len(Dir(MyPath, vbDirectory)) < 1 Then
MkDir (MyPath)
[code]....
I have VBA code for a Print Preview button on the main form that previews the current record in a separate Report using this code:
Code:
Private Sub cmdPrintRecord_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
End If
[code]....
I use this Print Preview code on a Button in the Form Header. The Main form lists head of household information. I also have a tabbed control with three tabs that have SubForms for Address, Children and Contact details. The problem I have is that if any of the subforms are left blank I get a Run-Time Error '3021': No Current Record. If I Debug (press the button), it takes me straight to this line:
Code:
varAge = DateDiff("yyyy", varBirthDate, Now)
highlighted in Yellow.Anyone on my database must have an address, should have contact details and could have children. If any one of these is blank then the print preview will not work.I would like to know how to stop this error happening for blank records in my subforms.
Is it possible to open a report using a combo box. At the moment all my reports are opened using cmd buttons. This is just a question of curiosity, I will continue to look into it myself of course.
View 8 Replies View RelatedSeasons Greetings to all.. I hope you didnt put on too much weight.
The fog at Heathrow ensured I had a very stressful Christmas.. but thankfully it has gone for now.
i have a question regarding choosing a report to open based on a combo list..
i have a field called jobtype..
this field will always have either
"CASH" or "ACCT"
i have 3 separate report designs.. 1 design for cash jobs, 1 design for acct jobs, and 1 deisgn for both jobs.
i want a form that will allow my user to choose which report to look at..
lets call it form1.. i want to place a combo on my form (combo1) that has the values..
CASH
ACCT
BOTH
i realise that in my report query source.. i can use the following as the jobtype criteria
[Forms]![form1]![combo1]..
Question
I need the combo to realise that if the CASH value is selected.. it should open the CASH report..
if the ACCT value is selected.. it should open the ACCOUNT report..
and finally if BOTH is selected then open the BOTH report..
how can i do this?
I have a report that I would like to bind to a combo box. I have built the combo box with the table that I need but I need it to select and print a specific report when the user selects the correct item from the combo box. I really do not know if this is possible and my coding ability is next to nil, but having it would really help my users.
Thanks for whatever help you can render and if necessary, I will send you the database and show you what I need.
Thanks again,
Rio
i have two combo box, one is cboMonth and one is cboYear. i am trying to get the values from these 2 combo box, and used the value to generate report. however, when i click the btnPrintSummary button, system keep prompting me to enter parameter value.
Code:
Private Sub btnPrintSummary_Click()
Dim stDocName As String
Dim stWhere As String
Dim blnTrim As Boolean
[code]...
I created a simple form that has a dropdown of all the reports that a user can select. I am using the following command;
DoCmd.OpenReport "rpt_Roadshow2", acPreview, , "RoadShow.RSID = SelectSymbol.Column(0)"
Where SelectSymbol is the name of the ComboBox and Column(0) is the first column of that data field. When I run it I get
Run Time Error 3085
Undefined Function 'SelectSymbol.Column" in expression.
The premise:
I’m trying to create a report that is based on one of the columns in my data set. This is a rather large database, but there are only a few variations in this column and I’d like to have a report of the individual variations.
The current fix:
I’ve been able to make a report of all the variations and they are organized within each group. I cannot get Access to make a report that has only one of the variations.
How I’m doing this:
I am currently trying to use a combo box to pick which variation I want. I created a table that is related to the main table, which only has the names of the individual variations (and none are repeating, so I believe that was done correctly).
Then I am using a command button to call the report format (I am using VB to do this).
The issues:
Rather than just displaying the single variation that I chose, the one I chose is highlighted and all of the others are showing up directly below it. Then all of the data sets are showing up.
The needed fix, I think:
I don’t think I have the combo box and the command button linked properly. Does anyone know how I should have the parameters set in the combo box and what command I need to include in VB to draw the information from the combo box?
I have an unbound combo box on a report that looks up to a table of address data.I have a specific requirement where if one of the bound fields on the report is a specific value, I want the combo box to show data. If the bound control on the report is a different value, I want the data in the combo box to be different.
I have tried using the OnOpen method, but it says I cannot assign a value to it.I have tried using the OnLoad procedure, but it doesn't show anything. the code is as follows:
Code:
Private Sub Report_Load(Cancel As Integer)
If Me.[Dispatch Type] = "Sent to A" Then
Me.cboDispatchTo = 15
ElseIf Me.[Dispatch Type] = "Sent to B" Then
Me.cboDispatchTo = 8
End If
End Sub
I have a form that filter records off of combo, I want the user to run reports based off of the filter selected in the combo box.Here's the code I've been toying around with:
Code:
Private Sub ReQuote_Click()
Dim strCustomer As String
Dim Filter As String
If IsNull(Me![cboFilter]) Then Exit Sub
[code]....
I ripped it off of another thread on here but my needs are slightly different so I couldn't quite get it to do what I wanted.
I am trying to design a form which would have a combo box cbo1(Market) and a command button (btn1) to finally view a report based on the values selected in the combo box. The query (say qry1) that the report uses has about 11 columns, in which Market is one of them. And I have 8 different Markets. Now i need to be able to generate the report for two options:
1. I should be able to show the columns for the selected market ONLY(it need not be multiple selections; just one will do). Example: If I selected the Market 'Chicago', I want the report to display the column values for only Chicago.
And the other option is.
2. I should be able to show the columns for 'ALL' markets together. I dont actually have an option by name 'ALL' in the 8 values for market. I would like the combo box to show the option 'ALL' along with the 8 values in the list.
I am using a combo box to enter Employees names for training hours...I want to use a pivotchart but when i use the training hours table/form the pivotchart gives me the combo box numbers instead of the names. I know there is a formula or something I am suppose to use here or even a query but I don't have a clue as to how to do this....if someone would be so kind in directing me with instructions and help...thanks
:confused:
Hi guys . I created a form that has 3 combo boxes. Their name are Project Number, year and weekno . It has also a button that on click action supposed to generate a report baced on my combo box criteria and then loads that report for me. could any expert show me an example on how to do this. I have difficulty finding an example in google since i did not exactly what is called this method of generating report in access 2000.Thanks
View 2 Replies View RelatedHi I currently have 2 seperate reports that I want to use in one.
I have...
1. A Date report that works from a form with a to and from field, it then finds all reports between those two fields.
2. A Client report from a form, a simple drop down box that gets it info from a query, it then works of a macro to find all records to that client
What I want is to have the one form where you can 1st select the client at the top from the drop down and then you enter the to and from date, once you click ok it will bring up all records for that client within the dates.
This is the code I use for the dates, is there a way to add an extra bit that makes it look at the client combo as well to just show the records for that client between the specified dates...Code:Private Sub OK_Click()Dim strReport As String 'Name of report to open.Dim strField As String 'Name of your date field.Dim strWhere As String 'Where condition for OpenReport.Const conDateFormat = "#mm/dd/yy#"strReport = "clientnameanddate"strField = "DateJobReceived"If IsNull(Me.txtStartDate1) ThenIf Not IsNull(Me.txtEndDate1) Then 'End date, but no start.strWhere = strField & " <= " & Format(Me.txtEndDate1, conDateFormat)End IfElseIf IsNull(Me.txtEndDate1) Then 'Start date, but no End.strWhere = strField & " >= " & Format(Me.txtStartDate1, conDateFormat)Else 'Both start and end dates.strWhere = strField & " Between " & Format(Me.txtStartDate1, conDateFormat) _& " And " & Format(Me.txtEndDate1, conDateFormat)End IfEnd IfDebug.Print strWhere 'For debugging purposes only.DoCmd.OpenReport strReport, acViewPreview, , strWhereEnd SubPS I didnt write this code i just edited it for my own use so please reply in simple terms
Any suggestions are appreciated !!!
Thank You
I have several lookup fields in a table that reference data in other tables, each with two fields (unique nummber & text data). The combo boxes in the data entry form work fine, but when I produce reports, the unique number shows up in the output, not the text data from the second field. What can I do to force the data that I need to see in my reports?
View 1 Replies View RelatedI have about 10 reports and I have them listed in a combo box. I would like to just pull down the report I want and click on the single button and it would open up. I know I am a pain in the *** but I could always hook the reports to 10 buttons but that design looks trashy.
I already made the reports and just waiting for some help. I think im losing my mind, it seem every time something is done in this database, people keep asking for more changes. What is going on.....
I have a form with a field called "comRpt" listing all the reports available to run on AfterUpdate procedure. I would like to add a command button when clicked the selected report shown in the "comRPT" field runs then it is attached to an emailed. How I can accomplish this?
View 2 Replies View RelatedI am trying to get a report based on a selection from a combo box. The issue is many fold. Firstly I have been playing around with it so much that I have messed up the syntax and can't remember what I had. Here is what I have at the moment (this is based on a button):
DoCmd.OpenReport "RepClassrooms", acViewPreview, , " Class = '" & Me.cmboRepClass & "'"
The second issue is that it isn't filtering on the combobox - it gives all the data from the database based on all the entries in the combobox but this is probably down to the syntax again.
I have a database with a table name tblTeachersProfile and a report format based on the table. I also have a form with two combo boxes name cboState and cboCounty base on field from the table and a control button called Get. Now, I would like to make selection from the two combo boxes and generate a report after updating both combo boxes based on my selections.
This is what I have but it is not working: For my Get button
Code:
DoCmd.OpenReport "rptInServiceIndividualSchoolAndTeachersInformation", acViewReport, , "strCounty = '" & Me.cboState & "'" And "strDistrict = '" & Me.cboRegion & "'";
I am using access 2010...and i have a form with a combobox on it...and in that combobox shows a list of employees names. When i currently select the name of the person that i want, it creates their own individual report of their workload.What I want to do is to be able to select that person and it generates their individual report and then attaches it in an email to that individual.
View 9 Replies View Related