Separating Text Box And Label In MS Access 2010?
Apr 15, 2015
How does one separate a text box and label in MS Access 2010? They seem to travel together side-by-side. I want to put one on top of the other.
I am using MS Access 2010. Also. I want to put one of them in the header and the other in the body of the table.
View Replies
ADVERTISEMENT
Dec 29, 2005
Hi!!
I have a quick question. I have a field that has information that looks like the below. I need it to be in 2 separate columns, but there is no space between the numbers and text otherwise I would know how to do this in excel. Anyone know how to do this is excel or access?
11000031377A & A AMERICAN DETECTIVE BUREAU
It should be separated as....
11000031377 A & A AMERICAN DETECTIVE BUREAU
Any and all help would be appreciated!!! Thanks!
View 2 Replies
View Related
Jul 18, 2013
I have a textbox on a form that i am pulling off of a table. the table stores the infor as listed below
customer ordernumber order description
Jeff 123 -abc
-def
-ghi
Bill 456 -ghy
-hig
but when i bring the field into a form it lists it out the field of order description as below in a textbox, i used textbox b/c the the text can be pretty long
-abc-def-ghi
how can i make it so that it separates out the listing as i have it on the table?
View 2 Replies
View Related
May 4, 2015
I have been doing an exercise to split the data from the list of the information into column A, B & C. Unfortunately the data value that i have consist of several set of data format therefore it create an issue for me to separate the information in Access 2010 easily.
eg.
Original Data Field
FLRY-B-0.75-L-GY
FLRY-4.0-V-R
VTAC-GY 19X20
COT-F2-5-DL
Actual Data To Populate Into Column A, B & C should be the following :
A
FLRY-B
FRY
VTAC-GY
COT-F2
B
0.75
4
19X20
5
C
L-GY
V-R
(No data captured for this column)
DL
View 14 Replies
View Related
Oct 10, 2011
I'm using an Access 2010 report to recreate a spreadsheet that contains rows consisting of fourteen columns of data. Each column is totaled. The data types are numeric and the property sheet format is either Standard or Percent depdening on the column.
In order to track the totals, I utilize two text boxes for each column. One is visible and contains the data for that particular row. The other is hidden and has its Running Sum property set to "Over All". The final totals row consists of text boxes that reference the final result of the running sum text box.
This works up to a point. I see correct totals results for columns 1-10. Then for some reason the running count appears to stop for the second to last row of column 11. (It's always the second to last row). As a result, the totals for this column (11) and subsequent columns (12-14) do not total.
View 14 Replies
View Related
May 7, 2014
I've been writing queries in the following format for years in Access 2003, but having recently transistioned to Access 2010, I've found the following sql doesn't work.transform
sum(s.value)
SELECT
s.sn, s.ln, s.pn, s.id, s.lat, s.point, s.supply_type, s.used, s.real, s.code, c.name
FROM
supply_points s
, codes c
WHERE
s.code = c.code
and s.id is not null
and s.code = 1075
and s.month >=[forms]![main]![gppstart ]
group by
s.sn, s.ln, s.pn, s.id, s.lat, s.point, s.supply_type, s.used, s.real, s.code, c.name
pivot
s.month
In Access 2010, this query returns the following error message:the Microsoft Access database does not recognize '[forms]![main]![gppstart]' as a valid field name or expression
Is this a common phenomena in Access 2010?
View 3 Replies
View Related
Jun 17, 2014
I have created a member data base form in Access2010.
That has been populated with 366 member records
I have two text box fields that are currently free type fields, Member Type & Member Status.
What is the best way I can change these to show only the relevant options:
i.e. Member Type ( Full, Family, Pensioner, Life. )
Member status ( Current, Lapsed, Deceased)
I have tried to right click the field but the "change to" option is greyed out & not available.
I have also tried to insert a combo box or list box to show these options. The "use control wizard" option has been highlighted but when I drag either a combo box or list box into the form. the wizard does not activate.
View 14 Replies
View Related
Nov 26, 2013
I have a MS Access 2010 application when the User opens form CONTACTS Form
◦User finds single record to be used CONTACTID is identifier to be used for selection
◦User clicks button to open form frm_MAIL_MERGE
◦Frm_MAIL_MERGE has a drop down combo box that reads the folder location where the application resides and displays all .DOTM files (that is all template files) and one more combo box which contains the CONTACTID.
◦User selects single .dotm file for merge
◦Frm_MAIL_MERGE has either drop down to select CONTACTID or UNBOUND data field for user to type in CONTACTID number
◦User enters CONTACTID to be used for the mail merge
◦User selects SUBMIT
◦Application merges selected .dotm file with the information in table CONTACTS for the selected CONTACTID
◦Merged document is saved on the user Desktop as xxx.docx
View 10 Replies
View Related
Apr 4, 2013
Is it possible to have a value in an excel 2010 cell be used to update an access 2010 db?
For example, if in a spreadsheet "test" cell A2=3 then in a db "test" a column "value" is 3. However, if the value in the spreadsheet changes so does the db.
View 1 Replies
View Related
Jun 23, 2015
I am using Access 2007 and 2010. I would like a text box (or label) on a report to autofil using fixed text from a label on a different (closed) form.
View 8 Replies
View Related
Mar 23, 2015
I wish to work in Access 2010 with a subset of my Outlook 2010 contacts (all desktop- no network barriers), so I am exploring the Desktop Contacts DB found in Microsoft's templates. It passes contact data back and forth using the standard macros, but I wish to add more fields from Outlook. It seems I need to find the code associated with the macro. I believe I can solve the problem using a Linked table, but am wondering if there is another solution?
Calendar synchronization is another issue. Linking gets me to the Archive Calendars, but not the Current one in Outlook which is what I want.
View 2 Replies
View Related
Jan 25, 2005
Hi,
while designing a form, I want to delete a whole bunch of text boxes, but I would like to keep their labels. how do I do this?
Thanks 4 any tips!
Jean
View 4 Replies
View Related
Feb 6, 2005
i want to make a condition that if an OLE object of mine is empty then the label won't be visible. (visible=no)
The reason i want it is that the ;label is placed inside the OLE object frame, and when i fill the ole object i want that the label will disappear
View 3 Replies
View Related
Nov 23, 2005
hi again,
i am making a form which has a help link on it;
the help link is basically a label using this code:
Private Sub help_Click()
Me.help_pop.Visible = True
End Sub
this makes the help_pop label appear visible (as it's visibility is false)
ok so i have that bit sorted, now i want to be able to click the help link agian to make the help_pop label disappear..
any help appreciated
Rob
View 9 Replies
View Related
Oct 4, 2006
Hello,
Is there a way to make the text in a label smaller than size 8?
I need to put some text on a form, but it's too large for the limited amount of space I have.
Thank you.
View 4 Replies
View Related
Sep 9, 2004
I have a text label that I would like to have vertical instead of horizontal. In the properties box, I go to the other tab and set 'Vertical' to yes and the text rotates. Except it rotates 90 degrees clockwise. (The text starts at the upper right corner and reads down, you have to tilt your head to the right to read it.) This seems the wrong direction to me and to my office mate - all the tables we've seen with vertical text has the text rotated 90 degrees counterclockwise (text starting from the lower left corner and reads up, you have to tilt you head to the left to read it.)
Is there any way I can make the text rotate counterclockwise instead of clockwise? I really don't want to create many little graphics.
Thanks
View 3 Replies
View Related
Feb 3, 2005
Hi all-
Does anyone know how to create a text box inside of a label box in a report? I need to create a report that mirrors a memo format. In the report, I need to type a label ("Total score is __ out of __.") where the __ spaces are calculatedtext boxes based on a table. Thanks.
View 2 Replies
View Related
Jun 12, 2013
I have two text boxes, and i want to make there value be the label for the form. Here is what i have in the Label on the form:
=Nz([Last Name] And [First Game],"Untitled")
Where am i going wrong?
View 5 Replies
View Related
Dec 9, 2013
I have one field in my table "Id". Here I have inputed 16 digit number always. Can I print out every digit with different text box or label in my report?
View 4 Replies
View Related
Jun 9, 2015
I have a Menu form that has 5 cmdbuttons that opens the same main forms but with 5 different filters. I want a label or text box to change to the name of the filter. I am using VBA to open the form. I can't code a form that's not open yet. Is there any way to accomplished the above?
View 14 Replies
View Related
Dec 31, 2013
I'm running Access 2003 and my question relates to delivery notes that are produced for drivers as reports. These delivery notes have a blank payment box for the driver to complete if the customer pays upon delivery.
As more and more customers are prepaying by credit cards, I'd like this payment box to be automatically filled with a "PAID" text which will let the driver know the order has already been paid for.
The delivery note is produced from an "Orders" table which has a "Paid" field whose value is automatically set to "Yes" when the order has been paid for.
I was hoping to be able to place a "PAID" label on the report which is only visible when the Paid field of the underlying query is Yes.
As things are at the moment I cannot see any way to put any conditional statement onto this Text/Label. The only options for the "Is Visible" property of the text are Yes or No.
View 4 Replies
View Related
Jan 20, 2015
I have globally defined 'Progress' as integerer and using the following code on my splash screen - i want to add a "." to the end of the label caption until progress = 10 (10 timer events)
Private Sub Form_Load()
Progress = 0
End Sub
Code:
Private Sub Form_Timer()
Dim Dot As String
Dot = "."
Progress = Progress + 1
Me.lblProgress.Caption
If Progress = 10 Then
DoCmd.OpenForm "frmLogin"
DoCmd.Close acForm, "frmSplash"
End If
End Sub
View 1 Replies
View Related
Jul 27, 2014
I have a report that displays on a continuous style report. What courses the employee have been on and when they expire
right I have field call expirydate and another call dayover showing the number of days till that course has expired also I have made a label called Expired1
now what I'm trying to do.....
if the expirydate has passed I want the expired1 label to be visible and dayover field to become invisible
I have tried
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
If Me.Expirydate < Date Then
Me.expired1.Visible = True
Me.DaysOver.Visible = False
End If
If Me.Expirydate > Date Then
Me.expired1.Value = False
Me.DaysOver.Value = True
End If
I have also tried the code on current event on the report
now my problem if one of the course has expired it will show the label called Expired1 but on all the records but I only want it to display on the record that has expired and leave the daysover text box visible if course has not expired
View 7 Replies
View Related
Oct 29, 2013
I am attempting to use VBA code to make the label in my report hidden if the text box is blank. I am very new to coding, and am not sure how I would express this in code. I have been looking at a few examples of how to get this done, but it doesn't seem to work. Where to insert the code. Attached is the image of the properties for my label and text box that I want hidden if text field is blank. I al just lost trying to figure this out.
View 7 Replies
View Related
Jun 19, 2013
I would like the label for a text box to read "B&W or Color" for a database of photographs.
Access will not accept the ampersand. Since this is just a label, I thought I could get away with using this symbol.
Is there a way to get the label to accept the ampersand?
View 1 Replies
View Related
Jul 24, 2013
I have a report base on my table. Here a check box. I wanna show two label text hide/show base on when check is true or false. It will be when report will be open. I have try this but nothing is happened.
Code:
If AffecteAc= True Then
affected.Visible = True
general.Visible = False
End If
View 1 Replies
View Related