Hi, Newbie Question,
what can I include in my code to prevent a user from entering a date into a textbox (via code via combo boxes)
that is an earlier date than the last or latest date field record entry. The two questions I s'pose I'm asking are how do I reference that
last or latest Record (which maybe the user just inputted via the form) & how do I approach the code. The user will be inputting data
for his club members for a monthly sporting event & I'm trying to prevent him accidentally entering an earlier date than the last meet.
I have a scenario where the first three rows of date which have dates of 4/1, 4/4/ 4/6 with ndc 5513026701; next six rows that have dates from 4/8 to 4/20 with ndc 5513014801; next three rows that have dates from 4/25, 4/27, 4/29 with ndc 5513026701.
The issue I am having is I do not know how to have separate min/max dates for ndc 5513026701 since when I group by ndc 5513026701 min = 4/1 ; max = 4/29. I need to have min = 4/1 and max = 4/6 for one row and another row of min = 4/25 and max = 4/29.
Any easy way to sequentially create min/max for each ndc 5513026701? I wasn't sure how to verbalize this so I have attached a sample worksheet.....
Are there no arrays in Access? I am looking for a way to put sequential dates onto a calendar. An array would work fine, with an offset for Weekday(FirstDayOfMonth).
Shall be grateful for clarifications for these two :
1. I have two fields - TheYear (set to take the current year) and another for sequential numbering. In fact I created this to replace the autonumber field. As suggested by a member I created a Generate button with the criteria as under
Private Sub Generate_Click() If IsNull(Me![NumFld]) Then Me![NumFld] = Format(Nz(DMax("[NumFld]", "[DiaryTable]", "[TheYear]='" & Year(Date) & "'"), 0) + 1, "00000") End If Me![NumFld] = Format([NumFld], "00000")
End Sub
It works fine. and when the year is changed, the numbering starts from 1 again. My question is how do I make it to auto generate the number so that the user doesnt have to click the Generate button everytime to get the number. Suggestions please.
2. Is it possible to change this sequential numbering midway i.e. to start from a different number and increment by one?
Hello, I am very new to access and I am trying to create a simple sytem to help us create part numbers. We are using a 2 digit descriptor to help define the part some. Then we want to add a sequential 7 digit number on to that.
Example:
01 (is electrical) 02 (Shop supplies) etc....
So...
01-0000001 would be a part number for an electrical part.
I do not understand how to have access add the zeros to the front. I would also like to be able to jump a bit out of line to reserve part numbers for certain projects and also include some that we already have.
If this make any sense to anyone, any help would be appreciated!
I have an existing table with a field labelled Job Number (17 Job Numbers). Each month I import a new table and match each record via another field (serial number). For each new record, one or many, I want to attach a sequential Job Number. In this example the new job numbers need to start at 18 then 19 etc. How is this possible? I am fairly new to Access so please be gentle!. Cheers
Im trying to create a document register in Access 97 to create and track document numbers, for this i want to assign a 6 number unique id to each record starting at 000001 going up in order to 999999 which will form part of a unique docuement number ...i know this may be a really easy thing to do but can anyone tell me how?
I need to generate line numbers for an access query. This query is run via VB code. After it runs, a Dlookup is performed to search for the line number of a particular order detail id. When it finds it, it puts the line number along with other unique order detail information into a text file to be used by a computerized saw that cuts the parts out. Here's a sample query:
The query is supposed to be sorted with SortID Descending, Frmlgth Ascending, Stilelgth Ascending - in that order. The sort is working fine. However, the Sequential numbering is not. The OrderdetailID has NO bearing on the sort order. Here is my SQL code:
SELECT OrderDetails.OrderDetailID, ProductTypes.ProductTypeSortOrder, OrderDetails.FrameStileLengthActual, OrderDetails.FrameRailLengthActual, OrderDetails.OrderID, (SELECT count(*) FROM OrderDetails As x WHERE x.orderdetailid <= OrderDetails.orderdetailid AND x.orderid = orderdetails.orderid) AS SeqNo FROM OrderDetails INNER JOIN ProductTypes ON OrderDetails.ProductType = ProductTypes.ProductType GROUP BY OrderDetails.OrderDetailID, ProductTypes.ProductTypeSortOrder, OrderDetails.FrameStileLengthActual, OrderDetails.FrameRailLengthActual, OrderDetails.OrderID HAVING (((OrderDetails.OrderID)=[forms]![orders]![orderid])) ORDER BY ProductTypes.ProductTypeSortOrder, OrderDetails.FrameStileLengthActual DESC , OrderDetails.FrameRailLengthActual DESC;
Does anyone have any suggestions? I'm not too good with SQL, but I can figure it out (I think!). I've searched all the formus, but all the reference I can find regarding this don't work for me in my application...
I have a form on which I need to print a sequential number - increasing by 1 each time the form is printed. I cannot think of a way to do that - perhaps something returned from a query? Any suggestions?
Hello Access friends, Trying to have a sequential autonumber for the ScreenID with the DMax () function. Please advise on what is wrong with the following : =Nz(DMax("[ScreenID]","[Screenprep]","[ScreenID] = '" & [CarModel] & "-" & Left$([Category],1) & "'")+1,0) Neither putting this code in control source or beforeupdate event of the form is not working.
I have looked around and from previous posts in the forum come up with this module. But it is not working either: Public Function NewScreenID() As String
Dim db As DAO.Database Dim rst As DAO.Recordset Dim ScreenID As String Dim CarModel As String Dim Category As String
On Error GoTo Err_Execute
Set db = CurrentDb()
Set rst = CurrentDb.OpenRecordset("SELECT Max([Screenprep].[ScreenID]) AS MaxScreenID from [Screenprep];", dbOpenSnapshot)
If IsNull(rst!MaxScreenID) Then NewScreenID = [CarModel] & "-" & Left$([Category], 1) & Format(1, "0000") Else NewScreenID = rst!MaxScreenID + 1 End If
rst.Close Set rst = Nothing Set db = Nothing
NewScreenID = ScreenID
Exit Function
Err_Execute: 'An error occurred, return blank string NewScreenID = "" MsgBox "An error occurred while trying to determine the next sequential number to assign."
End Function
In advance thank you for your time.Can someone please guide me on how to sort this out?
I placed the code Nz{DMax("field name","table name"),0)+1 on the control source of the ColNo field and i also tried copying numerous similar codes to the BeforeInsert, OnCurrent, etc.. events, but the result is ALWAYS THE NEXT MAXIMUM NUMBERFOR THE "ENTIRE" POLID.
What i mean is, if i enter a new record, it would give me a sequential number of "4". I figured out this is because 3 is the last maximum number as i have shown on my sample table. Even if i use the PolID "789", the number shown on the ColNo field results to "4".
IT SHOULD HAVE BEEN "2". Considering that the last ColNo used for PolID 456 was "1".
I have a field called "Project #" that needs to generate a unique number each time a command button is clicked. For example, when the button is clicked the blank "Project #" field is filled in with "653001". After the "Project #" field is filled in the button also runs a code to create a report exported into Excel. This report will only have the records with the Project Number of "653001". Then, when more records are added and it's the end of the next week, the button is clicked again and the "new" blank "Project #" fields will be filled with the next Project number which would be "643002". A report will again be created but now with only the records with the Project number of "643002". The first three characters will always be the same for the Project Number "653" but the last three will increase whenever the button is clicked to update any new records that have a blank "Project #". So, it should look like: 653001, 653002, 653003, 653004, etc.
I know it sounds confusing but I hope someone can help.
Hi, im pretty new to access, i need some help or a pointer on how to set up a sequential number. i have a orders table with an order number starting GO how to i get access to count up in ones from the starting number. regards
I'm making a database that has to do with ski lifts. There is a report I'm trying to make about some safety equipment, the way the boss wants it structured with six consecutive text boxes, like this:
Now the text boxes are filled with values from a table. The problem is that if you put two text boxes side by side it will just display the same values. I was wondering if there is a way to get it to display consecutive values from the table even if they are side by side.
I know that there may have been many posts on this and I have searched for a total of about 2 hours in these forums before posting, so please don't shoot me down for asking this.
I simply need to know how I can create a unique, alphanumeric order number. I was going to use Autonumber, but from what I have read on these forums, that is not the way to go, as Autonumber is simply to identify the record.
What I need is an number like so: ST000. It needs to start at ST142 and increase by one each time. Obviously I would like to avoid gaps from records being deleted or not completed etc.....
I really have no clue how to do this, and would appreciate it if anyone can point me to a post that would help, or offer me the solution.
Just trying to figure out how I can run a select query on some data I have and how to also include an additional field which has a value counting the number of rows.... eg in the first row there would be the usual results and the new field would have a value of 10001, second row would be 10002, third would be 10003.
I've done some searches for sequential numbering but couldnt find anything so far.
I have a form with 3 tabs...each tab has the same subform embedded in it.
There are 3 sequential records in the database, and my desire is to have each record display on its' proper tab.
How can I set filter criteria for each subform to append the record sequence identifier to the link master/child fields to ensure that only the appropriate record displays on each tab?
Basically, I trying to use tab controls with embedded subforms to display the many side of a one to many relationship. The parent form contains the data for the parentrecord, and I want the subform, with a tab for each related record, to show the child side of the data relationship. One child record per tab, utilizing the same identical sub-form for each.
I've taken on the task of transitioning excel reports (and their format) to a database. One report summarizes all the parts of a piece of furniture, and the order of the machines each part goes to.It looks similar to this:
Part# Part Name Machines/Operations M7264Top Panel 112114116120121325216 M7265Under Top Panel 112114116120121 M7266Base Assembly 411325216311310312316
The table this comes from has both operations and setups, so I used a query to filter only the operations.The query (qryOperations) result looks like this:
i need to add sequential numbering (1,2,3,4...) to each line of the qryOperations and use the sequential numbering as the column header.How do I add sequential numbers to the query, that restart after each change in part number? I can do this in a report easy enough, but not a query.This is the SQL of the query I need to have the sequential numbers in...
SELECT tblparts.[PART NUMBER], tblOperationCodes.MachineCode, tblOperationsList.Order FROM tblparts INNER JOIN (tblOperationsList INNER JOIN tblOperationCodes ON tblOperationsList.OperationCode = tblOperationCodes.OperationCode) ON tblparts.[PART NUMBER] = tblOperationsList.[PART#] WHERE (((tblOperationCodes.Function)="O")) ORDER BY tblparts.[PART NUMBER], tblOperationsList.Order;
Need a sequential number on report. Have an unbound text box and set it to list a running sum over group. The twist is that I'd like to have it start with an assigned starting number [Starting Number] and then add 1 to each subsequent record. It works for the first record but then the next record is last value + [Starting Number]. Basically it is a check run where I would list the starting number and the report would do the rest.
I have a list of what should be sequentaia numbers, but I am finding instances were a number seems to be missing..Is there a way to query the whole dataset and find all missing instances without having to trawl he list?
Ineed to track Trailer security seals that are sequentially numbered with 8 digit numbers...They are physical seals and no efile with the numbers to upload into Access...is there a way I can put in a range and Access will populate the rest in a table?
I have a table like the one below. I need to Auto Sequence based on JobIDOne in the field that says sequence in the manner that I've typed. Hand typing is not an option because by table will be updated regularly. All other fields are updated via a form. I need a either a macro or VBA solution that can reconcile this, preferably through the table. Note, I do not want to use a query to create this sequencing or SQL language as I do not know how to write SQL commands.
I know it can be done but I've seen about a thousand ways to do it that I haven't been able to modify for my specific table.
DateOne TimeIn JobIDOne InitialsOne Dates Worked One Sequence
