Everything is going well, when i make a transc ,transcid generated
i,e 1,2,3,to 47,48,49,50 and so on. In this case there are minimum 50 transaction on daily bases,
Here i have an idea that daily after 11.59pm, I mean after changing date, when I make a transaction, transaction id or sequence no start from 1, and my last day data will also remain safe .
This is what I am trying to accomplish I need to be able to create a serial number which automatically resets every day so I may use it to easily know how many records were created per day, without running a report.
I have a table called "OrderDetails" with following fields:
Num OrderID (Primary key) Product Quantity Price
I want to create a data entry subform that can used to enter order details in this table such that, for a given OrderID, the Num field is automatically set to previous number + 1. For example, for OrderID = 12, if there are 4 products that need to be entered, the 4 records should automatically take 1 , 2, 3, 4.
Is any body know how to retrieve the manufacturer's hard disk serial No.? I want to use it in my access application to avoid piracy. At present I am useing a code which gives me Volume serial No., which got changed when ever my user format his hard drive. Instead of HDD firmware serial, code for retrieval of any other permanent No. like mother board or CPU firmware serial can help me to solve my problem
I am working in ms access database form. I have a form with detail section. In detail section i would like to make sr.no field auto increase each time new quotation is created. Using AutoNumber didn't work because because it doesn't start the serial number from 1 for each new quotation.
I am attempting to modify some code that is used for reading content in an Outlook mail and need to catch and move the email if certain content is duplicated in the email.
The code reads the email that is in the attached image format:
As seen, this email contains 2 devices, but the Serial No in both is duplicated.
In the code, I need to capture this and rather than reading the contents, I need to just move this email to a separate "Manual" folder to be dealt with separately, so not to write the information to the database.
The current code is as follows:
Option Explicit Private ns As Outlook.Namespace Private sEmailAddress As String Private sPerson As String Private dReceived As Date
I have two tables that I want to append to each other.But in one of them the date column has the yyyymmdd format and in the other it is a serial date number.How can I make them consistent by either converting yyyymmdd to date number or by converting the date number to yyyymmdd?
I am trying to construct a system in access where I can have a user type in a part number, revision of a part, job number, serial number quantity, and generate a serial number based on the quantity that they need.
I am getting hung up on even how to construct the tables effectively to accomplish this, let alone the forms, queries, etc.
The numbers have to be in the following form. XXXX-XXXX
For an example:
I have part ABC and I need 5 serial numbers.
I need to be able to create a batch of serial numbers automagically that reads like:
9001-0001 9001-0002 9001-0003 9001-0004 9001-0005
Then for the next part XYZ I need 3 serial numbers. It would be constructed like this:
9002-0001 9002-0002 9002-0003
With the goal of eventually being able to search a part number and revision, or a job number and return all serial numbers assigned to that.
I'm having an issue with the database being read only and a type mismatch due to OpenRecordset. I know this database use to work when it when it was just
CurrentSerNum = RecSet(0) +1 was doing the incrementing.
I need the database to increment in a different way now.
Q=manufacture location 1st number is new=0 or used=1 2nd and third number =82 4th is single digit year aka 2015 = 5 6 and 7th are work week aka 25 for this week 8,9,10 are incremental numbers for the units made that workweek, so 001,002,003. Then week 26 starts the increment starts back at 001.
Code: Private Sub MakeThoseProducts_Click() On Error GoTo Err_MakeThoseProducts_Click Dim NumericSerial As Double Dim WorkWeek As String Dim WorkYear As String Dim WorkWeekNumber As Integer Dim WorkYearNumber As Integer Dim Location As String
is there anyway to make a counter field that is automatically filled (1,2,3,...) rather than filling it manually and also it resets each new day?? I'm not talking about autonumber field because of its nature also because I use it as a uniqe field "VisitID",
Looking to see if there is an easy solution to this problem I have.
I have a table which holds order information, the primary key for this table is orderID which is an autonumber.
The field in question is order number, which has a default value of "JJO"00000, which I have started manually at JJO10001, is there anyway i can get my database to automatically increment this number to save me from keep checking the last order number produced.
Lost count of the number of times I have gave the same order number to numerous customers.
In a field called PSSheets I want the number to be update every new entry, if I use the AutoNumber feature it won't let me enter the number I want to start with, which is 1421001, then the next number would be 1421002 and so on right up to 1421200 and then the number would change to 1422001.
My usual method is to delete everything in my table, which does not need to be maintained, then I Compact and Repair and re-open the form and my ID is reset to 1. Now it just continues from the last number I used.
This ID field can and will blow up pretty fast, so resetting it would be useful.
I have a parent form which has a class variable (class module instance) to store the form' status and more.... and when i add a new record to the subform it resets the class variable field' data. but this only happens on first transaction, but if i re-run the steps (re-set the variable field value) it's not happening again.
I am using an attendance management system with a DB in Access. Now I want to create APPLICATION_ID automatically by continuing number. For example, I have a table called "LEAVE_APPLICATION" and the structure is below:
Now I want to update the table by adding the below data
00360 2 00360 2 01390 14 01390 1
How can i create the APPLICATION_ID field auto generating while pasting additional data. It should be numbering continually from the last record (Grouping to be applied for EmpID)like below:
I have created a sub form in a form that allows data entry for order details. I have a column that holds order amounts that automatically rounds up or down, and I don't want this. I have examined the back end table properties for this particular field, and the number field is set to general.
I have a main form called "frmMain" and on it I have a text control named "txtBoatStatus". The control source for txtBoatStatus is determined by code that I have in the Form_Current event. The code is as follows:
txtBoatStatus.Value = "There are " & BoatStatus & " boat orders that are complete."
(end code sample)
Now when I first open the frmMain everything works great and the control will say, "There are 5 boat orders that are complete." Perfect. However, In the instance if I open the form with my Boat Orders and mark off another order as complete (bringing my total to 6), the txtBoatStatus does not update when I reopen frmMain. It will only update and show, "There are 6 boat orders that are complete." if I manually hit SHIFT+F9.
How can I do this automatically? I've tried various things such adding "Me.Recalc" or "Me.Requery" to differnt events, controls, etc. but I still cant get it to show the updated number automatically. How can I get it to update without SHIFT+F9?
I have a 2010 Access Database with a Navigation Pane. When I click a Navigation Button to view another form I lose the position and record I was on in the first form. It's almost like the first form refreshed when I click the navigation button to view the second form. Is there a way to setup the Navigation form so when I click on various navigation buttons it won't reset the previous form I was on?
I have a stockist which includes " stock number", " description"
When I use these parts to create a "bill of materials" for a job I am presently selecting the material and this data is going into the table and the stock number just goes in the form not the table, is there a way that when I select the "stock number" the material will still go in the table and the stock number stays on the form. or also go into the table
The reason I want to do this is because the stock number is easier to remember than the description ...
I've been building a CRM in Access that allows for creating profiles for our accounts. When we add a new account, I'd like an Account ID to automatically generate and look like this: CRMXXXXX where the X's represent a random number. I originally wanted to set the field as autonumber to just count up, but unfortunately I need to append this value to another sales database we have; you can't store the text "CRM" with an autonumber in a table.
Right now, all I've done is place an equation in the default value of a textbox I have on my 'Add Account' form. I then made the control source of the text box the Account ID field. My equation is as follows:
="CRM" & CStr(Int(Rnd(Now())*10000))
This appears to work, as it generates a value in the correct format. However, I've realized that each time I open the CRM, the random numbers start over again and I run into issues of trying to create a new record with the same ID as a previously created record. I assume I need to incorporate some sort of timestamp to it in order to change it.
I have 2 fields in access table. In one field i fill numbers eg (1,2,3,4,5) drop down list. In the second field I need to fill another data. When I chose one of the numbers from Field 1, I want automatically fill the second field with appropriate data.
I have several fields that I fill in on a form and they all need to add up in the last field. The first way that I tried this worked good for the initial data entry on the form. However if I need to edit one of the fields in the form then it resets the TotalCost field and I have to enter all of the numbers again. Is there some way that I can make this work? Or is this an Access quirk I will have to live with?
I tried to do this two different ways.
Here is the code for the first method:
Option Compare Database Dim C1 As Long 'For Total Cost Dim C2 As Long 'For Total Cost Dim C3 As Long 'For Total Cost Dim C4 As Long 'For Total Cost
[Code] .....
This way works great the first time that I tried it, I had to re-enter info in all the fields if I wanted to change one.
Here is my second method:
Which didn't work, i received an error message:
"The expression After Update you entered as the event property setting produced the following error: Invalid outside procedure."
And then nothing changes.
Code: Option Compare Database Dim C1 As Long 'For Total Cost Dim C2 As Long 'For Total Cost Dim C3 As Long 'For Total Cost Dim C4 As Long 'For Total Cost
I've searched through the forum looking for what i want to do with no luck so hopefully one of you kind people could help.
I'm setting up a DB that logs in a batch of parts to which i generate a batch no. As the batch progressess through the works when a problem arises we generate fault records (I've set up another table for this and linked the batch no fields together). I want to put a serial no. on this form consisting of 'year' 'batch No.' and ?'Auto number'? From reading posts is it best to put the 3 items in seperate fields (less hassle)
My 2 questions are
1, how do i extract just the year from a date field?
2, This is the main problem. The auto number. If i use auto number to generate a unique number to log the record the number will be massive in no time at all. This is fine as the unique identifier for the record in a table but not for the serial number of the printed report. Idealy I want to have the batch number then a serial number that resets to 1 on a different batch No. For example
21098/1 21098/2 Batch No./serial No. 21098/3
22309/1 22309/2 22309/3
Just some more info this database is a multi user database split front and rear.
I hope i've explained this well enough, many thanks for your help in advance
I want a field to be a serial number made up of a letter of the alphabet followed by 3 digits. I want the digits to increase by 1 in each of the following record. For Example the serial number in the first record would be A001, then followed by A002, A003, ....., A142, A143, A144 & so on. I am fairly new at Access but I have experimented with AutoNumber, it won't work if the Field is not a pure mumber, can't get autonumbering to happen if I treat the field as text. I don't know where to go from here.
