Hello,
I'd like to know how to set values to a subform when opening a main form
I have a quotation form called FQuotation with a subform on it.
This subform is the link between the products and quotation it is called SFProdQuote and has the fields: refproduct, quantity, quote and PQTotal.
Once I have filled the info on the main form i pick the products on the subform using a combo box on the refproduct field, input the quantity and give it a quote.
All this works fine it calculates quantity x quote = total.
My issue is I'd like to create a quotation form that opens with a set of products already selected in the subform. let say 10 of them, since my quotations always start with the same 10 products or so. I do not want the users to have to select over and over the same things.
Is it possible to open a form with set values selected in the combox of its subform?
1. I have a switchboard. I want to click a button, that opens a form with a dropdown list, when I make my selection, it opens a subform in add mode, but the linked field in the subform isn't empty, but filled with the mainform's field value that I selected?
OR
2. Is there a way for me to open a form in add mode, add data to it, click the add button (I will add an add button) that allows me to add again, but this time a particular field is not empty, but filled with selected info from previous selection?
Say for instance, I have 2 fields (both combo box fields), I click add, made selections for both fields, I click add again, but this time one of the fields stays constant like it's already been selected. It's filled with what was selected from before.
Hi every body . I got a a form and sub form. I want to disable sub form untill the user finishes selecting values from combo box drop downboxes. I be happy if some one show me how to do this.
I'm trying to create a record for a table that has 2 attributes:
ContainsTracks +album +tracks
I have my main form, where the album is determined by a TextBox. My subform has a textbox that lists the tracks (in datasheet view). I have this set up and working fine.At the moment if I try to add a new record by typing a new entry into the subform I get the error: "Index or primary key can not contain a null value". This is because both album and tracks make the composite primary key of ContainsTracks.
My question is, how can I tell the subform to grab the value from TextBox1 in the main form as the +album when I create a new record.I have provided two screenshot that perhaps explain my predicament a bit better
I have a form, a subform and a master unique table. I need the unique table to updated in the following manner: Form has certain fields that need to be assigned to every record created in the subform[id] and [info1] Subform has a unique [caseid], and contains further [info2] but needs to be bound into [id] in the main form. Example of the master unique table:
I've managed to accomplish this with a linked table&subform structure, but the master unique table looks like crap because it collapses the subform values into sub-records in the master table when the [id] is similar. The data is in the rigth place, i just want it not to be collapsed/expanded, but every unique recors shows in the table in the regular format
when I open my Quotations form I'd like a set of services to be selected by default, ex: Brush and Pen. So the user only has to input the quote amount
is there anyway to have the form open with a script like: "on open (or on load). in subform SELECT refproduct where product from tblproducts = 1 and also SELECT refproduct where product from tblproducts = 4" Therefore when my main form opens, in the subform I have already Brush on the 1st line selected and pen on the 2nd. My user only has to type the price.
Within my main form I have a combo box called "workgroup." Also in the main form is a subform called "sfrmSubmissionRecords," and within this subform is a combo box called "covermemo."
Each cover memo is assigned to a specific workgroup, so my intention is for each time a new workgroup is selected from the dropdown, the covermemo combo box in the subform becomes populated only with the covermemos associated with that workgroup. I'm almost finished except for the final step when I try to make the values regenerate...Access says that can't find the referenced form "sfrmSubmissionRecords"
This is the code that I'm using:
Private Sub cmbWorkgroup_AfterUpdate() Forms![sfrmSubmissionRecords]![cmbCovermemo].Requery End Sub
I am having a problem with calculated fields that are populated on the main form from the subform not saving to the table the main form is linked to.
I created a Purchase Order table that has information on what emplyee created the record, reason for order, customer information if its ordered for a customer, creation date, eta date and notes while the Purchase Order details table is for information on the supplier, product item number, product name, quantity and cost. they are linked by the Purchase Order number which is the primary key in the Purchase order table. it all looked good so i made the form with the Purchase Order Detail as the subform, i got the form all working great and how i wanted it but then i decided i wanted the supplier name and the subtotal of the cost in the main form populated or calculated by the values in the subform.
I copied the fields i wanted populated in the main form to the subform footer and added the calculation for the subtotal then added the formula to the source code on those fields in the main form so the values would populate. it all worked great on the form and the values populated as they were supposed to so i saved the record and went to look at the tables and i found that while the values in the calculated fields that I populated from the subform showed up in the form they didnt save to the table while the non calculated fields saved fine. i did some experimenting and found that if i delete the code and put the data source back to the table in the form and just type something in the text box it would save to the table but not if i had the code in and let it populate.
an example of one of the codes i used to populate the data in the main form is:
I have a Form opening from Access Options. I would like to close this Form using the Timer. The following is the code I have used but it is not working.
Private Sub Cover_Page_Form_Load() OpenTimer = Timer End Sub Private Sub Cover_Page_Form_Timer() If (Timer - OpenTime) = 5 Then DoCmd.Close acForm, "Cover_Page_Form", acSaveYes End Sub
Next question. If I can get this to work can I then use a DoCmd to open new Form within the code above or do I need a new process.
I have developed a database but have had difficulty with sorting data within subform of a main form. The subform displays the related tasks that correspond with main form that has been selected. Within the main form I have also created a text field that defines a particular sorting sequence of the tasks found within the subform which is titled Task Sequence. What I would like to do, is use the Task Sequence field to sort the order of tasks within subform. I have tried: IIf([ID] Is Null, 0, Val([Task Sequence])) within the Advanced filter/sort but either it shows only the first task defined in the Task Sequence or it wants to filter the main form and not the subform.
I have a subform which makes a change to a field on the main form. When focus is returned to the main form, the BeforeUpdate and AfterUpdate events fire. Why? I thought from the form's perspective, the subform is just another control.
BTW, I get the same behavior if I modify the field from within the Exit event of the subform control.
In either case, the main form's Dirty event is NOT triggered.
I have a button on my main form that allows me to view one of my reports. In order to view the report I have to close my main form. My problem is how do I reopen my main form when I close the report that I have viewed? Some code that would reopen my main form when clicking on the X in the upper right hand corner of the report to close it?
I have a form, which is comprised of a sub form, and some of the text box controls sided with a button, and the event had been written to the button.
Now, to give a note on how had the sub form had been created is firstly taking a clone of the "Payments" table and using it as a datasheet, and then create a sub form in the form, it works fine
I have a main form that has two subforms, subform1 and subform2, both connected to the main form. When I enter data into a field in subform1 I want subform2 to requery and update to show the calculated results from the new or changed data in subform1.
I found that if I do a refresh it works when changing the data but not when entering a new line of data in subform1. I tried some code in the after update field of on subform1, but cannot seem to get anything to work.
Me.[subform2].Form.Requery
Does not work. It errors and says it cannot recognize subform2 as a field. I have tried a field name on subform2 but I still got the same error.
I've designed a stock control form which enables the user to view stock bought and sold simutaneously. I have a combo box at the top of the form to select the item the user wishes to view. Then, on two seperate subforms, I have records of stock bought and sold.
The thing works fine, but when I open the form in the first place, the combo box is blank and the data shown on the subforms doesn't correspond.
What I need is for the form to open and show the data for item no 1.
Okay. So, i have this frmProduction that has a cbo box on it, and when i select the value 'sold from field' i want it to open up another form (frmSales) that i have already created. Now, not only do i want it to open it but i want to have some information on frmSales filled out with the values the user entered on frmProduction. I already have it opening the frmSales on the AfterUpdate value on the cbo box (if statement) but i don't know what to do about setting the values of frmSales!
I have a subform with two combo boxes. These boxes select product catagory and products. The main form sets the supplier from which to select products.
If the user can not find the product they require they can double click thje product combo, which opens the product input form
I need the Products Form to be automatically populated by the following info: Products catagory - from combo on sub form Supplier name/id form parent form.
How do I make this work and/or pass these values as parameters to the products form.
I'm still floundering around with Access and I am stuggling!! Thx. Kev
Lets say I have Form A and Subform A with the parent-child relationship established that works well. Subform A has a Text box control that is getting display when I include the subform in Form A.
Now, I decided I dont want to include subform A in the Form A. Is there a way for me to show the contents of that Text box control in Form A without attaching the subform in the main form (Form A)?
I read somewhere that to refer a control on a subform, I have to use the code - Forms!mainform!subform.form!control. But this would be in VBA. What is the equivalent of this in a Control Source in the main form?
If I have not explained myself correctly, please do let me know.
To summarize, my question is without including the subform, I want to reference the values of the subform in the mainform. (I have some design necessity for this requirement) Is there a way for this?
I've a form that has 2 subforms - which subform is used is dependant on the selection of a combo box in the main form. After much time spend trying to set this up I am happy to report that this section works fine.
My problem is that when I have completed the subform I am not able to continue tabbing through the rest of the form.
everytime i try to tab from my subform, it creates a new record for that subform. Also, about the subform, the control that links the main form and sub form is unique. I have now set my Cycle property on my subforms and forms to Current Record. How can I tab from the subform to the main form and vice versa?
Hi, I have this main form, "frmMainPatient" and I am trying to add in another Main form "frmFim2" as a subform into frmMainPatient. I am running into some issues. Can someone take a look and tell me what I am doing wrong. Thank you,
I have a main form that contains basic project information, and one of many subforms that contains project manager and contract information. (forms and subs linked by project ID) My project managers want to have the ability to only show project records that are theirs. I can make a filter based on any field in the main form without a problem using code like below.
Dim strFilter As String strFilter = "ILFID Like '*FME*'" Me.Filter = strFilter Me.FilterOn = True
How do I write a filter to reference the project manager field in a subform that will actually filter the main form and subform records?
This is my first post to these forums, however I have leeched so much information off of all you guys that I can't even begin to express my gratitude. So, now, onto my problem... I'm developing a form for our call centre people to enter information regarding customer returns. Customer orders are placed on one of two systems. In my form, when the person is entering info, I have a drop down box to choose between the two systems, which calls up a respective subform to enter system-specific information. The problem I have is that I can use tab to enter the subform, however I can't use it to get out. There are two records in the subform - order date and order number. After I enter info into these 2 textboxes and try to tab out, it seems that the subform goes to a new record. How can I get my form to tab into the next required field on the main form? Hopefully this makes sense, I just read through it and its kinda questionable. Thank you very much in advance.
I have a main form with 5 fields (I'd like to be able to use any number of them) that I want to use to run a query against that is contained in a subform. What is the best way to go about this?
Hi, I have set up a database for my company which holds records to all the companies that we have as clients. I have created a main form and a subform. The main form is where all the particulars of the companies are entered, and the subform is like a preview window of the companies. By right, when i click on one of the records in the subform, it should reflect in the main form, enabling me to add on additional information using the fields in the main form (i have some features in the main form that should be used to record the informatio), but I just do not know how to go about doing that. is there a way to link the subform to the main form, such that when i click on the past records in the subform, it will reflect on the main form for me to edit? Any help is appreciated.