I have only been playing with MS Access for a little while and I do not know all there is to know yet so I figured I come here to ask a question.
I use MS Access in web design and lately I have been experiencing a problem with my registration form which inserts new users into an MS Access database table.
Lately my registration form has become a target for spammers trying to inject spam in the form of html code into the password field of the online registration form.
I figured that I could deter this from happening by only allowing the letters A - Z and numbers 0 - 9 in the field and not allowing characters like < > and ? and ".
I assume I can do this with a validation rule but I'm unsure as to how I would go about setting this up. Limiting the field size to only 50 characters does not seem to work unfortunately.
Any help on how to set up a validation rule would be appreciated.
In a simple data retrieve/update form, how I can set a text field’s properties Enabled to No based on that particular record value?
For instance, there are 4 fields, employeeid, employeename, employeetitle, employeephone I would like to set the employeephone text field’s properties Enabled = No, if the employeetitle is Manager
I have a form that is intended to be used for both data entry and to edit/delete records.
The form properties are set to: AllowFilters = YES AllowEdits = YES AllowAdditions = YES AllowDeletions = NO DataEntry = YES
When a user opens the form from a menu they are given the choice for NEW, EDIT or DELETE.
If the user chooses NEW, the properties remain as above
If the user chooses EDIT or DELETE the form should open to a specific record as chosen on an interim form.
I have been using the following code to open the form for EDIT: stLinkCriteria = "[fldID] = " & Forms!frmsearchresults.fldID DoCmd.OpenForm "frmJobInfo", acNormal, , stLinkCriteria, , acFormEdit
However, the form continues to open in Data Entry mode.
I have a public variable that is set to NEW, EDIT or DELETE that can be used to trigger code...
Where should the form properties be set to make sure that the form opens correctly?
I am trying to get the properties of enabled and locked set in a continuious subform depending on a yes/no field in each record. I have tried using the answer in thread 160062, but this only works when it is not a subform (unless I have done something stupid!)If the main form is frmMain and the continuious subform is frmSub, where am I going wrong with this code which is in the subforms Class Objects?
Private Sub Form_Current() If Me.MaterialIssue = True Then CRMSignOffDate.Enabled = True CRMSignOffBy.Enabled = True CRMSignOffDate.Locked = False CRMSignOffBy.Locked = False Else CRMSignOffDate.Enabled = False CRMSignOffBy.Enabled = False CRMSignOffDate.Locked = True CRMSignOffBy.Locked = True End IfEnd Submany.
Good afternoon, I have finished completing the initial version of a database and am now ready to begin the testing phase. When looking at the database properties (Specifically - "Statistics") there is a "Revision Number", which is always blank. I expect some changes and would like to set the Version Number each time I make a revision. How do I set the "Revision Number" found under the Statistics tab from Database Properties which was pulled from the "File" button on the toolbar?
I am try to open a form from another and set a button's OnClick properties to a function and I keep getting an error message..Run-Time Error 2450Cannot find the referenced form ..And this is the code I am using.
Is there a way to setup the format on fields to only allow text inputs, no numbers wanted. I know I can do this at the table level but is some cases numbers are ok. So I want to code it so I can control when numbers are ok and when there not.
I know there have been a good number of questions about visibility in forms already but I couldn't find a solution to my problem (or maybe I just didn't get it).
Basically, I have a tabular form (more than one record displayed at once) and one the field is of the Yes/No type. For each record, I'd like to have a text box that displays 'pending', set as visible if the field value is 'Yes' and set as invisible if the field value is 'No'. The table is as follows: id : auto-number Flag: Yes/No [Yes]
If I use the following code on the Flag button: Private Sub Flag_AfterUpdate() Me.pending2.Visible = Me.Flag.Value End Sub
all the 'pending' text boxes appear and disappear together (instead of just the relevant one). I thought of using another text box, with the same data source ('Flag') but which would set itself to visible or invisible wrt to its own value but I couldn't find a way to do it.
Any suggestions ? Thanks in advance ! and many thanks already for the forum and the contributions - it's been extremely helpful, esp. for a beginner.
Then Af lost from view and Bf appears in form view, with Blabel and Bcombox show the value of Atxtbox.
BUT if I try something like this in Bf when an event happens
Code: Me.Bcombox2.RowSource = "SELECT xx FROM tablexx WHERE yy = '" & Nz(Me.Bcombox) & "'"
Nothing will be shown in Bcombox2, because Me.Bcombox return Null. I know this from doing
Code: MsgBox Me.Bcombox
and the message box will shows nothing. The same thing also happen with the Blabel's caption. In form view, it shows Atxtbox value, but when I accessed its caption's value, it returns Null.
What I wanna do is:
1) Open Af, insert value to Atxtbox
2) clicked Abtn, pass the value of Atxtbox to Bcombox
I am making a new Record in the design view of a table (creating a new field in the table), and I am assigning it a date type, is there a hotkey that will select the field properties sheet so that I can select the format of the field without having to move my mouse?
Hi, I would like to change the properties of either the column heads in a combo-box or the column names for tables. I don't think there's any way to adjust the column head properties, and I'm doubtful there's a way to change the column caption properties.
Some of my column titles are long, and I'd like to be able to word wrap them essentially. Anyone know if this is possible? Thanks.
I created and new field and made the source "Unbound" so that it is not connected to the field I copied it from. How do I now make that the information I enter in the new field does not duplicate in all of the similar fields in other entries.
Specifically, my database is a database of employees and the field Title is "Active". If I enter "Yes" by one employee entry, all employee entries will then state "Yes" by the Active field.
How can I change the properties so that by some employees I can write "Yes" and by others I can enter "No".
I am not so familiar with Access so if you can be specific I would greatly appreciate it.
VBA syntax for changing various "Field Properties" on an EXISTING table. Specifically, the field properties I'm trying to change are:
Field Size (I want to make this 'Double') Format (I want this to be 'Standard') and Decimal (I want this to be '2') The Data Type is already set as 'Number'.
I try to put an expression for the property "bound column" so that my lookup values will be directly dependent on one of attribute's choice
I have got four options for my attribute. Each option will use a slightly different set of lookup values. I save all four sets in another table.
Then in my properties definition I refer directly to this table as lookup base. When I put bound column number equal to an expression so as to choose the right column of lookup values it refuses. It seems that it does notl ike anything other than a numeric value.
If that's a no-go, I am not sure how to achieve what I try to do then?
Essentially I have a table that 4 attributes: QID,itemID,CatType,Catchoice
CatType can have only 4 values. Each value will make Catchoice take on a different set of combo values
The problem I am having is that I am stuck at the Catchoice lookup definition because it is dependent on what kind of CatType the user picks.
I have an unbound form which has 2 unbound combo boxes on it, both based on the same table, but I have used a query for each one to created the sort order, one alphabetically by item name (cmbA) and the other numerically by the item number (cmbN) . I also have a text field (ID) upon which is based a report when the user clicks a button. Currently the text box (ID) has a control source of column 1 of cmbA and I have the report working perfectly if one selects from the name combo box (cmbA) What I want to do is allow the user to select from cmbN and have the control source of the ID text box equal the number the selected so the report button will work then also.
I have tried to set the control source after update of cmbN but all that does is blank out the ID text box. I have not done this before so I am sure I have done it incorrectly. I tried again this morning using me.ID.ControlSource = Me.cmbN and stepping through the code shows that the cmbN ControlSource is equal to ID but I can't make the code that follows use the results.
I have a form that adds a record to a table in the database.I want that when i choose a value from a combobox in the form, it will change the value of another textbox according to what value was choosed.So essentially what i did is simply go to the combobox AfterUpdate and there i used this code:
If Me.Combobox.Text = "Solid" Then Me.TextBox1.Text = "grams" ElseIf Me.Combobox.Text = "Liquid" Then Me.TextBox1.Text = "ml" End If
But i encounter 2 problems:
1. When i set a default value to the textbox (which i want to), the changing of the value in the combobox doesn't do anything whatsoever. 2. When i remove any default value from the textbox, the changing of the value in the combobox does change the textbox to the corresponding value but then gives run-time error 2185: "You can't reference a property or method for a control unless the control has the focus".
I have 4 fields that are unbound on a form. img1 img2 img3 img4..When these are entered they are all combined and autofill another unbound textbox = imagename.. what i would like to do is from this unbound textbox 'imagename' ..i would like to populate a textbox that IS bound called FileName
[Event Procedure] Private Sub imagename_Click() Me.imagename = Me.FileName End Sub
This is the first time that I have done any major work with forms. After I thought I had finished a problem came up. There are several forms that are use to input information into a table. When the form is opened it grabs an automated number for tracking. The problem is, that if the form is opened and then closed it creates a line of data with all null values.
What I would like to do is have the form open, the user fills out the information, and upon pressing the "save" button, the data will save to the table. I think I need to have each text box write to a variable and then save on the click event. Or I could be completely wrong and need to do something else.
i'm guessing this is something I would learn in Forms 101 if i had ever taken that type of course
I have a numeric field (long integer) in a table. I've set the format to fixed. No matter what I set the decimal places to, auto, 0 or 2, when I enter a value of 0.71, it displays as 1.00
In my form, I've also set the field property to fixed, but it displays the value as 1.
I am creating a database that should be fairly simple. The database is for a local racetrack and I'm stuck on how to entering race results. I have four tables: Driver, Rank, Home, Class. The form to enter in the results contains a main form with a subform. On the main form there are two combo boxes, one to select the Class of the race, and one to select the Heat of the race: i.e Finals, 1, 2, 3. The subform currently has a text box containing the rank of the driver for that race and the driver's name. I want the Rank to automatically start at one and increase by one each time a new driver is added. The rank field is part of the primary key but cannot be an autonumber field because there will be multiple ranks in the rank table. The rank table contains a primary key of: Class_ID, Rank, Heat. Therefore, each class/heat combo needs to start at 1 and increase. I created a query that finds the max rank value of the class/heat combo and I thought I could use that value +1 for the default value of the Rank field but I'm not having any luck. I have attached the database so that you can see what I all have as there isn't any sensitive information. If it would be easier doing it some other way than using the query that is fine to. I'm open to anything that works. I also want the Driver combo box in the Rank form to be limited to only contain drivers whose Class_ID matches that of the selected class in the main form. I have the row source set up sot that it works when I make my first selection when entering the form but not when I change the selected class and I do have an After_Update event set for requerying. It seems this should be so simple but I'm just missing something. Thanks in advance for your help!
