Hi everyone,
how would i go about setting focus on a tab control? i have a tab control on a form with 6 tab pages. i am on page 4 ( bank ) and i have a button to add a bank account. this opens up the add form and i add the account. i then requery the form and the tab goes back to page 1. how do i set the focus back to the previous opened tab?
many thanks,
Nigel
i have a tabular form, which on its after update event, i requery the form, and it works fine. However, my only problem is that after the requery occurs, the focus moves to the first field of the first record. Is there a way in which after the requery, the focus will be set at the end, in that blank record, where to insert a new record ?
Thanks
What is the syntax for defining the tab that has focus when a tabbed form is opened under various situations?
View 2 Replies View RelatedI am having trouble setting the focus on my forms... I have a parent form with two labels that are coded like this.
Private Sub Advisory Messages_Click()
Me![ Advisory Messages].Visible = _
Not Me![Advisory Messages].Visible
End Sub
[code]...
I have the visible property set to no on the subform allowing the user to toggle the visibility when the label is clicked. The problem though is when I click inside the subform to use the scroll bar to view records, it transfers the focus to the subform making it almost impossible to close by clicking the label again because the label is on the parent form. I found the "me.parent.setfocus" command and a few other set focus commands but I don't know what I should be applying the command to in order to make it work.
it is possible to be able to scroll through a List Box with just a mouse over? Or, do you need to set focus on the ListBox before being able to scroll?
View 8 Replies View RelatedI have a form with a tab control on it. The input for respective fields are placed inside the tab control, and I have the "Confirm" button placed outside, on the main form. Now I wanted to be able to navigate my focus from a control from inside to tab control, out to the Confirm button on the form, to allow smooth flowing data entry.
However, it seems like Access separates the tab indexes for the controls in the tab control and outside on the main form, so setting tab index does not work. I tried using the code ON LOST FOCUS and SET FOCUS;
Private Sub txtPurchaseNote_LostFocus()
Forms![frm Imported]![cmdConfirmPurchase].SetFocus
End Sub
But then a dialog box appears:
Run-time error '2110'
Microsoft access can't move focus to the control cmdConfirmPurchase
(cmdConfirmPurchase is a button control)
I am new to Access and to the forum. I made a check printing system
table name = 'burgan'
form name = 'burgan cheque'
Fields = 'PV' and 'cheque' and 'Beneficiary'
I have inserted a button (Command31).The function I would like to add on clicking the button
1. it should chose the highest value in both fields (PV and cheque)
2. Create new record
3. Increment it by 1 (both fields 'PV' and 'cheque')
4. the focus should stand on 'Beneficiary' field.
Windows vista
access 2007
I'm populating a report with a query which pulls criteria from a form. When the 'run' button is pressed it opens the report, running the query, to filter the data. What i'm attempting (and it works if there is data present).
The data is text, which is a filename, which populates an image control. Most of my records have an image present but for the ones that don't I think I need to turn the image control's picture property to 'blank'.
I'm just now encountering problems with the records with no pictures so when i came up with this it worked with my tests which at that time only had images present....
I have two problems.
1) When I run the code as below i get Run-Time Error 2185; you can't reference a property or method for a control unless the control has the focus.
2) when i try to set the focus on the picture control in the report to see if there is text/value present i get runtime error 2478; database doesn't allow you to use this method in the current view.
I assume this is talking about me opening the report in acViewPreview mode but i thought i needed to do this so the images are displayed in the image control.
Code:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
Dim strDBPath As String
Dim strRelativePath As String
Dim strPath As String
'rptOriginalOwnerCategoryItem!Picture.Text.SetFocus
[B]Me!Picture.SetFocus[B]
'Test to see if the record has a relative path stored
[code]....
I have a Main Form with a tab control. On each of the six tabs is a SubForm that takes up the entire tab. So basically I have a tabbed interface for my forms, just with a bit more control over the layout than if I just opened the forms separately in the Access window.
Anyway, on one of those subforms is a button. When you click it, it opens a separate form in a pop-up window, which is used to find a specific record. Once that record is found, you can click another button, and the idea is that this pop-up window closes, and you return to the underlying form, which jumps to the record you selected.
So far so good. Now, if I am working on my program in Access, and I open that subform's source form separately in its own tab, click the icon to open the record finding form, find a record, and then click the button to load that record, the following code runs, and it runs flawlessly - closing the pop-up window, and passing the information back to the main form which displays the proper record:
Quote:
Private Sub ViewRecord_Click()
Dim RecordID As Integer
RecordID = Me.ID
DoCmd.OpenForm "CDLExam", , , "ID = " & RecordID
DoCmd.Close acForm, "CDLExamCONT", acSaveNo
End Sub
Where my program falls apart is that, in actual use, this form is not open on its own. It's open as a subform on one tab of a tab control on a Main Form. So the third line of code falls apart. Access thinks I want to open CDLExam separately, but it can't because it's already open in the subform, so instead I just end up back at the main window like I want, but the form fails to move to the proper record. Basically, line 3 just doesn't do anything.
How can I make this work? I tried replacing "CDLExam" with the name of the main window, but then it tries to move to the record in the main window, which throws an error as the main window doesn't even have a record source attached to it.
how to refer to the SUBFORM which has CDLExam open, and tell THAT to move to the proper record.
How to set focus to a non Default instance of a form.
Environment
A2007 ADP Project
Document Window Option - Tabbed Documents
MS SQL 2012 Express DB
Windows 7 64 Bit
I using Allen Browne's method to open more that one version of form, storing each form object in a collection declared in a module. No problem there.
Now I'm trying to add a command button on an form to set focus to one of these non-default instances already open.
The form I am trying to set focus to has a the following related properties
Default View: Split Form
Pop-up: No
Modal: No
The form that has the command button on it is of the same type.
Here is the code I've tried:
'Code on Calling Form
Private Sub cmdProjectList_Click()
Dim FunctionResult As Boolean
If AppForms.GoToForm("ProjectList") = False Then
AppForms.Load_ProjectList
[Code] .....
The code compiles and executes with seemingly no problems. It finds the form loaded, then cycles though and finds the form in Forms but the SetFocus call seems to do nothing. When I run the code against a defualt instance ( one not opened using Allen Browne's method) it works fine and sets focus to it as expected.
When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
I have several forms and subforms that display data, but are not used for data entry. The first textbox on every form gets the focus on open. I'm sure I've seen some way to open the form with no focus on any control!
Can someone help me remember?
Thanks,
Sup
thanks for helping.
how do i get a record to get focus when a form opens or a button is clicked on?
thanks again
I am having trouble getting the cursor to change focus after updating a field in my tab control subforms. I have a main form with a tab control and 4 related subforms for each record in the main form.
I have a calendar that pops up with the On Click of my Date field. When the date is selected, it enters it into the field and the calendar closes. For some reason though the user cannot simply go to the next record with the mouse and has to tab to or select another field in the same record first and then click on the Date field in the next record.
I have tried SetFocus to "Hours" (the next field after "Date")and "NextRecord" on every Event I can think of but it does nothing, it just stays on the changed field and the only way to get out of it is to go to another field. I've tried saving, requery, etc. I've also tried the options shown in the forum with no luck and using different events associated with the Calendar form - On Close, Lost Focus, etc.
Any suggestions? Thanks
I have a form that has 9 tab pages. I have an amend button in the form footer that will do a different thing depending on which tab has the focus. How can I find out which tab has got the focus when I click the Amend button?
View 2 Replies View RelatedHi
I have a problem with setting focus to a text box. There is a listview on the form. Double clicking on a row will search the database for that record using SNo field and then display the contents on the respective control. When I click on a row the first time, it works. Clicking on the second row immediately gives the error "error 2110 - Access cannot set focus to the control txtReference.
Here is the code.......
Private Sub lvwOrders_DblClick()
ClearAll
Set rs = New ADODB.Recordset
rs.Open "SELECT * FROM tblOrderEntry where sno=" & ListView.SelectedItem, con, adOpenKeyset, adLockPessimistic
lblFooter.Caption = "Edit Record"
subRetrieve
End Sub
Private Sub subRetrieve()
Form_OrderEntry.SetFocus
With rs
For i = 0 To lstCostCenter.ListCount - 1
If lstCostCenter.ItemData(i) = !CostCenter Then
lstCostCenter.Selected(i) = True
Exit For
End If
Next i
txtReference.SetFocus
txtReference.Text = !ReferenceNo
txtOrderNumber.SetFocus
txtOrderNumber.Text = !OrderNo
For i = 0 To lstCostCenter.ListCount - 1
If lstCostCenter.ItemData(i) = !CostCenter Then
lstCostCenter.Selected(i) = True
Exit For
End If
Next i
For i = 0 To lstDescription.ListCount - 1
If lstDescription.ItemData(i) = !Description Then
lstDescription.Selected(i) = True
Exit For
End If
Next i
For i = 0 To lstOrderStatus.ListCount - 1
If lstOrderStatus.ItemData(i) = !OrderStatus Then
lstOrderStatus.Selected(i) = True
Exit For
End If
Next i
For i = 0 To lstSalesRep.ListCount - 1
If lstSalesRep.ItemData(i) = !SalesRep Then
lstSalesRep.Selected(i) = True
Exit For
End If
Next i
For i = 0 To lstPaymentMethod.ListCount - 1
If lstPaymentMethod.ItemData(i) = !PaymentMethod Then
lstPaymentMethod.Selected(i) = True
Exit For
End If
Next i
For i = 0 To lstCallType.ListCount - 1
If lstCallType.ItemData(i) = !TypeofCall Then
lstCallType.Selected(i) = True
Exit For
End If
Next i
For i = 0 To lstStatus.ListCount - 1
If lstStatus.ItemData(i) = !Status Then
lstStatus.Selected(i) = True
Exit For
End If
Next i
If !Status = "Pending" Then
txtReasons.Visible = True
lstAssign_Reasons.Visible = False
txtReasons.SetFocus
txtReasons.Text = !Reason
ElseIf !Status = "Assign" Then
lstAssign_Reasons.Visible = True
cmdSave.SetFocus
txtReasons.Visible = False
For i = 0 To lstAssign_Reasons.ListCount - 1
If lstAssign_Reasons.ItemData(i) = !Reason Then
lstAssign_Reasons.Selected(i) = True
Exit For
End If
Next i
End If
End With
End Sub
What can be going wrong ?
I have a form, and when it opens it has focus on a box i dont want it to focus on
How do i change which box it has focus on when it is opened?
I have two buttons on a form, one of them adds default information to three boxes, the other clears the info. I want to be able to hide one o the buttons depending on what is in the box.
I know I need to change the focus away from the control in order to hide it, but how do I do it please?
I have this so far, but there is something missing!
Private Sub Command744_Click()
Me.BdeRec40kMarksmanship = Null
Me.BdeRec40kFireStatus = Null
Me.BdeRec40kOpening_Range = Null
Me.Command743.Visible = True
Me.command777.Visible = False
End Sub
i have a main form, in which i have included 2 subforms on it. Now when i am at the last control on the main form, the focus moves to the first control of one of the subforms. However, when i am at the last control of this subform, on hitting the tab key, the focus does not move to the first control of the other subform.
How can i achieve this please?
Thank you!
I have a form that allows a user to select from a variety of options and then generate a report. It consists of three option groups:
1) Select a Team: A B C
2) Select a Report: A B C
3) Input a Date Range: From (blank) to (blank)
If you progress down the list and finish entering the enddate and then click the mouse on the Run Report button, nothing happens. The cursor remains blinking in the enddate field. You have to manually re-select one of your previous options on the form to get rid of the flashing cursor and then re-click the Run Report button to generate the report.
The option to include the Run Report button in the tab order is not available, I don't know why, but it is an image if that makes a difference.
Any ideas? I'm thinking I have to set focus for something. I just don't know when or where.
Thanks for all replies!
How do I delete this dummy record?
http://img.photobucket.com/albums/v401/Rrotz/phonelog1.gif
Also, how do I set the form to maximize fully like the above, when I open the form it defaults to this:
http://img.photobucket.com/albums/v401/Rrotz/phonelog.gif
Hi
I would like a control to have focus when a form is opened or press a button - how do i do this?
Many Thanks
How do i choose the field i want my focus to be on when a form i opened?
View 1 Replies View RelatedI'm trying to force a user to enter text into a field. To this end, I've created a subroutine for the exit method of the text box they are supposed to fill out. I check to see if the .text property is null, and if so create a message box that pops up a notification telling the user they need to fill in said field. After that, I try to use the Me.txtReason.SetFocus (the text box is called txtReason) to return the focus to that text box, but instead it moves on to the next text box. Is there a way I can prevent the user from leaving the text box until they've entered some sort of data into it?
Thanks,
Dave
Little problem with a form and subform. Problem is...I don't know why I'm having this problem! :)
Have a form with a subform. Everything is working correctly,with one exception. The form is entering payments (checks) then the subform handles the distribution. So after you input one or more lines on the subform you click the "new record" icon. Problem is the focus stays in the subform and not to the top of the main form. I know I could code it to force it to set focus to the first field on the main form... BUT.. I've done this before and coding was not needed. So what did I do wrong on this one?
Thanks
Hi
I have a list box setup with all the dates from 01/10/05 to 31/12/08.
I want to always start the list box at the current date while still allow the functionality to backdate if required.
I have used the undernoted code to set the row correctly but I cannot figure how to get the box to scroll down to the correctly selected row.
Dim i As Long
i = DLookup("ID", "tblIMDates", "cdate([Date])=date()") - 1
Me.lstDates.Selected(i) = True
Any ideas?
JC