Show Records From Three Combo Boxes Simultaneously
Jan 16, 2015
I have three identical Combo Boxes which show the names of the classes in our school. They are just three copies of the same combo box. What I want is this: I choose three different classes from these three boxes. Then I want a button at the bottom which when pressed, should show the records of these three classes separately. Preferably, as three columns.I have made the Combo Boxes, but am stuck at the button to perform these actions.
Im kinda new to Access and only been using the "Access 2003 for Dummies" for learning and making small databases. So far I can find out how to do the things I want, but recently got stuck with a combo box feature. What im trying to do is select entries in my combo box so that it will filter the table and show all its contents based on that filter. Im not sure how to link the combo boxes the right way and it seems some VB coding is needed which I dont normally use. If anyone has any idea how to do it, tell me how! Thanks. BTW im using Access 97.
What I am trying to do is create a master table which references the every other table.But the primary key references another primary key.I can get the combo box to display all the options, buy shows options already selected for other records.in other words...
I have 4 reference IDs from table A. (ID1, ID2, ID3, ID4)
Master_Table has a combobox to select between the IDs. if record 1 has ID_1 Record 2's combobox will show all 4 IDs If I only have 1 ID that can be put into record 4, it's combobox still displays all 4 IDs.
What I want is: If ID3 is selected for record 1, it wont be displayed in the comboboxes for the other records.
I have a set of cascading combo boxes. When a value is selected in Cat 1 ID, it narrows down the selections in Cat 2 ID which narrows down the selections in Cat 3 ID.
However, the values don't show up for columns Cat 2 ID or Cat 3 ID until I enter the row. Then I have it set to requery the fields because the underlying data isn't populated. But then when I leave the row, the values go away.
Why doesn't it show the underlying value from the table? Each column is bound to a field in a table - I would assume that the recorded value would show up. Did I miss something easy?
I am extremely handicapped in Access 2010. I am currently trying to create a database for a small company I am interning in. One of the things I would like to do is to update or create multiple fields in different tables simultaneously.
To explain, I have two tables, Production Activity in CY 2012 and Production Activity in $ 2012. Both tables have a field "Date of Activity." In addition to some other fields, Production Activity in CY has a field "Actual Production in CY" and Production Activity in $ has a field "Actual Production in $".
Now I had initially created two forms, each dedicated to one table, however my supervisor wants to use only one form to update both fields.
I also want to know how can I connect/link both of the Date of Activity so that if one changes, the other one changes too. And when I run queries, both "Date of Activity" fields should appear as one (when I want to run query of let's say the maximum or minimum production each month).
Anyone help I have 2 combo boxes cd group and cd name when I select CD group the records only associated yo that cd name display with that group.
Anyway, also the name of songs form works too,. So then now when I go from record to record the records display right with the songs and not with the cd group and name when I select Mormon Tabernacle Chior and name God Bless Ammerica it disaplys for all the records any help.
I have a feeling this is a common and probably easy question, but I couldn't find anything on it in the forums.
I have a main customer form with multiple subforms on it to keep track of my clients insurance policies and claims. I enter their contact data in the main form, and the policy data on one of the subforms. Then when they have a claim, I enter the policy information on the claim subform as well.
How could I have the combo boxes in the claims subform (which is storing data in a claims table) only show the policy numbers (stored in a policies table) assigned to that particular person? I would assume I need to somehow filter the policies query so it only shows records for that particular person, but I'm not sure how to do that on the fly.
I have a main form which has 4 combo boxes all based on tblPeople. Combo0 is skill Combo1 is discipline Combo2 is crart Comb03 is active
The sub form is a datatable list of the tblpeople.
How do I apply the filter to the datatable. I am assuming I need to build a sql statement somewhere like SELECT from tlpeople WHERE me!combo0 = [tblpeople].[skill] and me!Combo1=[tblpeople].[discipline] etc
Is there a sample database? or can somebody tell me how to go about this.
Background: I have a continous form linked to a table and I have 3 combo boxes on the form (linked to fields on the table). The combo boxes are called JOB TITLE, SCHEDULE and SHIFT. The source for the combo boxes are queries named respectively as LKUPJOB, LKUPSCHEDULE and LKUPSHIFT. For the three combo boxes listed abpve, the bound column is the first field of the underlying query and the column width of the first field is set to 0" (so that the second field of the query is displayed).
The way things should work is that for each record on the form, the LKUPSCHEDULE and LKUPSHIFT queries (queries for the SCHEDULE and SHIFT combo boxes), the queries are filtered based on the bound field of the JOB TITLE combo box. The name of the bound field for the JOB TITLE combo is called Labor_Rate_ID.
Problem: Unfortunately, It seems like the value of the labor-rate_ID in the first record (i.e. first job title combo box) determines the query list used by the SCHEDULE and SHIFT comboboxes for all the other records on the form. That is, even though the form has lots of records displayed, the combo boxes for each record don't have a complete list to work with.
Hence, the SCHEDULE and SHIFT combo boxes for some records are showing a blank (since available otions in the combo query list don't match the value in the table for that record.
Can anybody tell me how to get a continous form to refress the list for each record on the form.
I also don't know whether the Requery command for a macro could work and how to use it. I think though, that this problem can't be solved by a macro.
Basically, the question is around what kind of code will let you manipulate the properties of individual controls of a form at the Record level.
I have a table with the following 5 fields. (Service Type), (Valve Name),(Size),(Rating),(Description).
I want to do two thing:
First: I want to select the required information from the first 4 fields using combo boxes and get the last field (description) based on the selected 4 fields. In other words, i want the record to be filtered using first 4 fields to give me the last field info.
Second: I want to store the filtered record (all 5 fields) in another table.
This sounds like a cascading combo box issue but it isn't quite.
I filter my form using 2 unbound combo boxes which can be used in any order, both of which define text strings using case select. These strings are concatenated into a filter text and applied by a routine called in the after update event of either combo. All works well.
My question: How can I show all the filtered records in a third combo box so that users can easily select the record of interest from the filtered set?
I attempted to define SQL for each combination of the 2 comboboxes but it was getting ludicrously complicated so that got the heave ho.
After that, I attempted to use a recordset clone, but I couldn't get this to work: 'Clone record set for combo box rowsource Dim R As Recordset Set R = Me.RecordsetClone R.Bookmark = Me.Bookmark
'Populate combo box with recordset With Me![cboProjectList] .RowSource = R .Requery End With
Reading the Access help, it seems that a combo box can only be populted via query, table or SQL. Is there any way of using a cloned recordset or the me.filter to show the filtered form records in a combo or list box?
On my Class form when assigning students there is a combo box which shows the students names. Once a student is picked in the combo box their name shows up in the subform.
What I would like is a way to NOT show a student in the combo box after they have been selected. Is this possible? Or should I be looking at another way of doing this?
Hello, I am wondering if it is possible to have several combo "boxes" in one form. The form is based on one table. In the table there are several fields which use a look-up (combo) drop down box to choose from: Type, Description, Manufacturer and Location.
In the form I want a combo box for Type, to bring up specific records in a subform, then I want a combo box for Description to bring up another set of records (within that Type of equipment) and a third combo box for Location to bring up all equipment within that location.
When I have tried to set this up - it changes some of the data in the in the subform - which changes it in the underlying table. If it set the form to open in New Record, then nothing shows up in the drop down box. Is there some If, THen code I could use to make it look first in the Type, then in the Description field, then close those out and look for the set of records that match in the location field?
Does that make sense?
I know how to manipulate in MSAccess templates, etc., but I don't know much about the underlying codes.
I'm creating a form that has combo boxes pertaining to each of the following fields from table "Documents": DocumentID (primary key), DocumentTitle, DocumentAuthor, and DocumentYear. No combo box is used with any priority over the others. The working form will allow a user to retrieve the full document record (data for all fields) by using any combo box they want, as well as any combination of combo boxes. This means that if a selection is made in one field's combo box, the drop-down lists in the other boxes need to update based on that preliminary selection. The filtered results for each field, based on any and all combo box selections, are always shown in a single datasheet on the form.
The kicker is that when a user starts filtering records by making selections from the drop down list in a combo box, but then decides to TYPE in another field's combo box, I want the combo box they typed in to do two things: 1) filter the records for that field based on what they typed, if any records meet that criteria (e.g. they typed "B" so only records beginning with B are shown), and 2) if no records match the typed criteria, the search starts all over (at the top of the cascade), filtering all library records based only on what they typed in the most recent combo box.
Does that make sense? Any tips welcomed.
I don't know how to cascade combo boxes in this way.
I made a form for users to go back and see saved records as and when required. However my cascading combo box are not showing the saved information. Information is saved in back end.
I have a form that has four combo boxes on it that enable the user to select entrants in a golf tournament for tee off times and tee. (I have attached part of this database to this post) It all works fine but after selecting the first player in the first combo box and then selecting the second combo player I would like the player selected previously not to show up. Is this possible or do I have to rethink the way players are selected.
I have a combox field on subform C that shows records from a query.How do I get this combo to only show records that relate to an ID on subform B.I have a subform for storing contracts and these are stored against a company name.On subform C I have a field that currently shows all records in a table. I need this combo to only show the records that relate the current record on subform B?
I am trying to get a series of combo boxes to interact and record the selections made in new records within a destination table. Here is situation with respect to the tables involved:
1 table lists the names/acronyms of various research facilities and the branch to which they belong (acronym is PK) 1 table lists Financial Points of Contact for each facility (acronym is FK to relate to earlier table) 1 table lists Technical Points of Contact for each facility (acronym is FK to relate to Facility table) 1 table lists program participants and the branch they belong to (Branch in FK to relate to Facility table)
I am trying to create a form that allows me to set the participant and, from this selection, restricts the facility choices in the Facility combo box to those that fall within the branch to which the participant is assigned. I think the next step is pretty obvious too. Once the facility is selected I have combo boxes that would only display those Financial and Technical PoCs assigned to that facility.
I have watched the 4 Data Pig tutorials and I can easily make functional cascading combo boxes as long as they only refer to the look up tables. I generated perfectly functioning cascading combo boxes on a test form. How do I generate combo boxes that will then store the info selected in my destination table? Whenever I try to set a Control Source it disrupts the functioning of the queries.
I am trying to have a query sort out my invoices by year but also to have the possibility to show all invoices.
I have one table "INVOICE" where I have a column "YEAR" calculated with DatePart function from the invoice date.
On my form "INVOICE LISTING", I want to have a combox "Combo957" selecting the year. I have forced the "ALL" selection to the combox using a UnionQuery.
My problem, I cannot get the query to work. I have tried many ways, the closest I can get is :
I am having an issue trying to show all records when I load my form. It loads correctly when I don't have a record source for the main form. However, the combobox filters will not work. My goal is to have users be able to use the datasheet, subdatasheet and combobox filters. I can get the form to work just fine when I link the Main form and subform, but when the form opens it is filtered on the first record. I have been successful with this approach when using other forms, but they didn't require a subdatasheet.
Is there anyway I can have the comboboxes to filter yet be able to show all records until the user selects filters? Is this possible?I finally got my Manager to agree to use a database instead of Excel files based on this form setup and I need to make as "user friendly" as possible (look and function like a spreadsheet) I attached some pics of the form along with the code for the filter.
I am building a tracking database where we would be able to track information which field are null data and report them to our Administration to fill the null data. For this I have created a form name "Search" and I have a combo box control on that form which is bound to "Table = employee" and its ROW SOURCE TYPE="Field List", I would like to able to query records where the selected value in this combo box is null through out the table.
For example if I select "Telephone" from this combo box dropdown, I would like the query to show all the records where the "Telephone" is null, how to set the criteria in query to take the combo box value as "Field Name" and then compare it with the Field/Column in the table and show the null values.
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts 2. CompanyName (combo box) from tblListOfAircraftsOperators 3. TeailNumber (text box) from tblAircraftOperators 4. AirportNameSearch (combo box) from tblAirports 5. PassengersNumber (text box) from tblAircraftOperators 6. ManufactureYear (text box) from tblAircraftOperators 7. SourceSearch (combo box) from tblInfoSource 8. CountrySearch (combo box) from tblCountry 9. CategorySearch (combo box) from tblAircraftCategory 10. EamilToOperator (text box) from tblAircraftOperators 11. InteriorPhoto (Bound object frame) from tblAircraftOperators 12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
