Some Fields Intermittently Not Showing Data In Access 2013
Feb 12, 2014
I've recently moved up to Access 2013 (from Access 2010) and everything went well, until one day my splash screen was blank and the program had empty fields...after seeing that all the links to the BE were OK, I re-booted and everything worked fine....until the next day the same thing happened...... The program randomly falls over about once or twice a week and I have to re-boot to cure it.....
My splash screen has a standard dlookup ( [=DLookUp("Banner","tblCompanyInfo")] ) to display the active company name...and sometimes its populated and other times its not..... if its not populated then loads of other fields on the forms are also blank - even if they point to valid data in the database!!!!!!
Win7 (both 32 and 64bit) with Access 2013 32bit on three PC's - same problem on all!!!!
View Replies
ADVERTISEMENT
Feb 13, 2014
I've recently moved up to Access 2013 (from Access 2010) and everything went well, until one day my splash screen was blank and the program had empty fields...after seeing that all the links to the BE were OK, I re-booted and everything worked fine....until the next day the same thing happened...... The program randomly falls over about once or twice a week and I have to re-boot to cure it.....
My splash screen has a standard dlookup ( [=DLookUp("Banner","tblCompanyInfo")] ) to display the active company name...and sometimes its populated and other times its not..... if its not populated then loads of other fields on the forms are also blank - even if they point to valid data in the database!
I run Win7 (both 32 and 64bit) with Access 2013 32bit on three PC's - same problem on all!
View 3 Replies
View Related
Aug 13, 2015
I have a people table; Ethnicity Table; Program Type Table; Attendance Table.
I enter the people into the people table then enter people into the attendance table with lookup for name from the people table and a lookup for program type from program type table and enter date attended. I then run a query on the attendance table to remove duplicates. I created a form from the attendance query there are 3 headers Program, Ethnicity, Name. but the program type comes up as the ID number and not the text name.
The Ethnicity did the same thing but when I added the Ethnicity from the people table to the ethnicity header it show up as the name and I hide the box with the number but when I add the program type from the program type table to the program header is changes the source of the report to the program type table and then nothing shows up. It did not do that when I added the ethnicity type from the ethnicity table to the ethnicity header.
View 1 Replies
View Related
Apr 6, 2015
I am trying to Hide or Show the Access Window by using two buttons on a Form. Running Access 2013 in Windows 7 64bit.
I have used code from the Internet as below but added the PtrSafe item to the Function Declaration as below:-
Option Compare Database
'Hide Access desktop screen and float Forms on pc desktop
Private Declare PtrSafe Function IsWindowVisible Lib "user32" (ByVal hwnd As Long) As Long
Dim dwReturn As Long
Const SW_HIDE = 0
[Code] ....
I then have two buttons on a form coded as below:-
Option Compare Database
Private Sub cmd_Hide_dbw_Click()
Call fSetAccessWindow("Minimize", False, False)
DoCmd.OpenForm "frm_Test", acNormal
End Sub
[Code] .....
I have attached a Test Database which demonstrates the problem I am experiencing.
Do the following sequence...............
Open the Test Database. DO NOT ENABLE CONTENT
The Access 'Ribbon'Test_Database.accdb is active and usable
Open frm_Test in Design View in order to inspect, all should be as shown above.
Now click the Enable Content warning
Switch frm_Test to Form View
Click button Hide dbw. Closes the Access Window
Click button Show dbw. Opens the Access Window...HOWEVER....
Attachment 20252The Access Ribbon is locked and usable !!!
I cannot find a way to re-activate the Ribbon
View 2 Replies
View Related
Sep 26, 2014
I have access 2013 windows 7, I'm trying to expand the record keeping on a database someone else designed. I've added the fields i need to the Recordsource(s) (the table, query, and working on the form as well) I can't make the report any larger it seems (its currently at 22") and i need to add another "page" worth of fields horizontally; is there a way to do that? and also to replicate the header and other key fields so they're on that 3rd page.
View 3 Replies
View Related
Mar 27, 2014
I am setting up a database using Access 2013, and am trying to test downloading files from Excel. For some reason it is not allowing me to have more then 4 columns in the excel file, it gives the error "Subscript out of range". I thought it was the type of variable at first, but when I tried deleting different columns on both files, the transfer always worked with 4 columns. How do I allow more columns to be transferred?Also, is there a way to not include the row numbers of the excel file as an ID column and only include the ID given in the first column?
View 4 Replies
View Related
Feb 21, 2013
In Access 2007 and 2010 there was a "Collect Data" group under "External Data" where I could click "Create E-mail" that would build an email form for an outbound email in Outlook based on a table. I would then send the email out, then collect the data back into the table from Outlook when the recipient of the email responded with a filled out form. I don't see how to do that with Access 2013. I do see the "Email" button, but that's for something else. I see no 'Collect Data' in Access 2013 like the picture below shows from Access 2007.
View 6 Replies
View Related
Jan 2, 2014
I want to create a Web App in Access 2013 that contains a table of client names, addresses etc, and a second table that contains order details, including client name. It would be nice to ensure that as someone adds a new order they are give a drop down menu containing existing client names, and I can see how you can do this for a brand new table using the lookup data type. But I already have an Excel spread sheet containing client names. If I import this into my Access web app to create the client table, and import the existing orders to create the order table, I then try and change the data type of the client name (in the order table) from short text to lookup, it won't let me!! (If I create an empty client table from scratch, it lets me define the company name as a lookup data type - but I can't then import from Excel into this empty table)
View 14 Replies
View Related
May 5, 2015
I have a simple line chart plotting price against date.
I would like to plot a secondary line on this chart from an array of data that I calculate. I've searched hi and low but can't seem to find a way of doing this.
The closest I've found is from this:-
[URL]
I can create my array of data but I can't seem to get it to work and think it may be for pivot charts....which access 2013 can't do anymore.
how to plot multiple data sets on the same graph in Access 2013.
View 9 Replies
View Related
May 20, 2013
I am pretty new to access and trying to create a form to enter data into a table. I keep getting a syntax error. Below is the part of code where I keep getting the syntax.
CurrentDb.Execute "INSERT INFO [Tb1 - Information]([Zone], [Controller], [Controller Type], [Panel], [CB #], [Controller Unit], [IP Address], [Modbus Address], [Sub Address/ HTC#], [PP Location], [Opp Priority],[ Startup Priority]) " & _
" VALUES('" & Me.Txtehtzone & "', '" & _
Me.Txtctrler & "','" & _
Me.TxtCB & "','" & _
[Code] ....
View 1 Replies
View Related
Jan 15, 2015
I have 5 tables that I would like to input data in. It can only be done with a single form. The fields I want to input in have the same names in all 5 tables, for example:
Table 1:
Name
Age
DOB
Table 2:
Name
Age
DOB
Table 3:
Name
Age
DOB
Table 4:
Name
Age
DOB
Table 5:
Name
Age
DOB
Is it possible to input data into all of these fields in each table using one textbox for each field?
Preferably without having to use code but if it cannot be done without it then that would be fine.
View 7 Replies
View Related
Jan 21, 2015
I have a report that runs from a query with fields but for some reason its not showing all the text in the field it only shows around 250 characters, I have the field to auto grow in size but still not working?
View 1 Replies
View Related
Apr 24, 2014
My database only has one table of data so it's not complicated.I would like to create a form that can create customisable Excel exports of the data based on set conditions and exporting only select fields. URL...I have one table of data (tblCustomers) which contains all of the fields in the box above.
I would like export the data from the table to excel showing only the fields that are ticked in the box (frmCustomReport).The check boxes are named chk then whatever the field name is eg. chkLocation, chkStatus. The labels are the names of the fields in tblCustomers. Is there a way to do this in SQL or VBA?
View 3 Replies
View Related
Mar 26, 2014
I am using Microsoft Access 2010.
I have a form, having following fields
Nationality, Combo box, Options are Indian/foreign State: With list of States in India.
What I want is, when data entry operator , select, Foreign, State field automatically hides.
And when data entry operator , select Indian, State field shows in the form.
How this can be done in Access 2010
View 5 Replies
View Related
Oct 7, 2005
HI THERE.
IVE GOT A QUICK QUESTION ABOUT DATA ACCESS PAGES AND THE DATA THAT IS SHOWN. IVE CREATED A DATABASE THAT HAS AROUND 25,000 RECORDS OF LANDUSE PROPERTIES AND HAVE CREATED A DATA ACCESS PAGE TO VIEW THESE RECORDS. THE PROBLEM IM HAVING IS THAT WHEN I LOAD THE FORM ONLY 1000 RECORDS SHOW OUT OF THE 25,000 THAT I HAVE IN MY DATABASE.
ARE THERE ANY SETTINGS THAT ALLOW YOU TO CHANGE HOW MANY RECORDS CAN BE SHOWN? IS THIS ONE OF THE SHORT FALLS OF DATA ACCESS PAGES? :confused:
ANY COMMENTS MUCH APPRECIATED.
View 1 Replies
View Related
Jan 14, 2014
I am relatively new to Access 2007, I am having an issue with a sub form not showing all the data from a table.
Basically I have 2 tables: Headers and Line Details, they are linked via an order number. The headers will only ever have 1 record per order number but there can be multiple records on the line details table.
I have imported the data into both tables. When I open my main form, all the data from the header file is all visable and all correct for all records. However when I look at the data in the sub form, it is only showing data for some of the records.
I have checked and the data is correctly linked, and if I change the "source object" to point directly at the table in the sub form it shows the record is there. When I point it back to my sub form it is blank.
View 3 Replies
View Related
May 5, 2015
I have created a database that is hosted on our company sharepoint. The database contains subcontracts with resource information by geographic location and status. I have built queries and added them as reports to the web app but I need to figure out a way to sum totals on the queries. For example, one report lists all resources of a particular type by 4 different zones and 3 different status. I need to have the bottom row show the total resources.
View 6 Replies
View Related
Jul 4, 2014
I have problem sharing an Access 2013 file from one cumputer and then change the data in the file on another computer, or i can change it but the change wont be made one both computers.
I'm working so i need my secretary to be able to change information or add, but i also need to get the change.
View 2 Replies
View Related
Apr 7, 2015
Using MS Access 2013, part of Office 365, I am trying to construct a report that has a different first page footer than the rest of the document. Googling for answers has produced a few options, but none that seem to work. I have virtually no VBA knowledge. I was hoping that there might be some code that I could place in a label in the footer and have it work.
View 1 Replies
View Related
Oct 26, 2013
I have an Access 2013 database file with many fields. One of them, I'll call it Field 3, is a box which I would like to either leave blank or put a check mark in it. I would like to be able to create an Iif field for Field 3 where a check mark is automatically inserted in Field 3 IF Field 1 - Field 2 <or= 0, otherwise I'd like Field 3 to remain empty.
View 9 Replies
View Related
Jan 30, 2015
Access 2013 ... Is it possible to compact a database to a new name?
(In previous incarnations of Access I regularly 'compacted and repaired' databases to USB sticks rather than simply copy the file in the (mistaken??) belief that this was a more reliable approach)...
I can't see where to do this in Access 2013!
View 1 Replies
View Related
Nov 17, 2014
I want to do multiple regression in Access 2013. with the VB code?
View 3 Replies
View Related
Mar 11, 2014
we are moving from Access 2003 to 2013 using Windows 8.1 64bits. We used Leban's code and library to create and merge pdfs. C
Creating pdfs can be done with built-in functionality in Access 2013. But I can't find a way of merging pdfs. I've tried Leban's Dlls files but I am getting run-time error: "File not found:StrStorage.dll" do I need to do something extra to make Leban's code work on Windows 8 64bits ?
View 8 Replies
View Related
Nov 28, 2014
I made a new column in a table in access. The table is not linked and linking unfortunately is not an option. In the new column, I want to create a sum for 5 years of funding. There are multiple columns for a different fiscal year.
In excel, it is simply =sum(range), but I am drawing completely blank how to fill in the column with the sum data.
The end result is the data from 4 tables will be displayed in Forms and Reports.
Essentially what I need is an ability to bulk update a column in access table without a need to reupload the entire datasheet (over 100k rows with about 30 columns).
View 2 Replies
View Related
Jun 18, 2013
I'm currently working on a project which requires integration of sms feature in ms access 2013.
The sms provider which i use for sending sms is smsglobal.
View 1 Replies
View Related
Dec 18, 2013
So I have finished a database and split it which is great. Only issue now is how do I turn the front end into an executable so no access to any parts of the access program or system can happen? I have done this before in a very old version of access but how to do it in Access 2013.
View 2 Replies
View Related