Hi,
I have a form with a subform.
When i click a button on the "main" form i'm able to change the source object of the subform. But the subform now shows the records which are already present i want the subform to start with a new record.
Who can help me out ?
Thanks in advance
Hi,
I have some queries in a list. When I run one of them I would like to show result on form. I made a subform and I defined from code in runtime the actually selected query as the subform's source object. It didn't work. :(
Why? How could I show a query's results on a form?
If somebody could help me , I would be very grateful!
I have OLE Object connected to a source Document. Each time I change the source document to a new one by using the sourcedoc property and action property. What I need is how to programatically print this document.
View 1 Replies View RelatedI'm trying to change a database that consists of a sequence of subforms held individually within different tabs on a subform. There seems to be a bit too much going on, so I've decided to leave the subforms unbound, and set them when the appropriate tab is selected, and unset them when the tab is changed. For most of the subforms, this works fine...
However! There's always an exception!!!
On one of them, when I set the sourceobject, it automatically populates the linkchildfields and linkmasterfields properties with an inexplicably crazy number of fields, most of which aren't even on the forms in question. I've tried to get around this by setting linkchildfields and linkmasterfields after changing the sourceobject. This does not work!
The first thing that happens is it returns error 2335 (relating to an imbalance between the number of fields) when I set linkchildfields. I try to get around this by trapping and resuming to the next step so it sets linkmasterfields and restores the balance, but, despite the fact that the linkchildfields and linkmasterfields are showing the correct fields, the form acts as if it has been bound with the screwy list of fields, and starts asking for fieldnames which are on neither form as parameters. When I hit cancel the subform control is empty.
I'm at a loss as to what the problem is or how I should sort it out! Any suggestions gratefully received.
I have a listbox "lbxMP" that holds names of forms and a subform "ctrlMP" that opens selected form (ctrlMP.sourceobject = lbxMP). I also have some various master cbx that control criteria in each form. I am trying to create a button that will not only clear/null all the cbx values (which works fine), but I am having a hard time telling me.ctrlMP to go back to null or unbound (i want it to blank out the subform to make it look fresh). I have tried requry and also me.ctrlMP = null and ctrlMP=unbound with no luck.
View 1 Replies View RelatedI am trying to join a number of reports into one report. I have a generic report which displays a different dataset given the user's choice on a form. I created a collection where I can store multiple instances of this report (called mcolReportInstances) - this works just fine.
I was looking to combine all the reports in the collection into one report. To that end, I have created a report with a number of subreport controls but with no sourceobject. In the On_Open event of this blank report, I am trying to set the source object of the subreport to one of reports in my collection:
Me.Controls("Child" & i).SourceObject = mcolReportInstances.Item(strKey)
However, it keeps giving me the error 'Type mismatch'.
Hello
I am using Access 2003(11.6355.6360) SPI
When I attempt to create a new DB - by performing Blank Database I immediately get a message 'Object Library not registered'.
If I 'OK' that box and try to create a table, I can do so - create Table in design view.
When I then try to Import external data - an excel file I get the message 'ActiveX component Can't create object'.
I have looked ob various sites for help and forum information regarding these errors but have found nothing conclusive, with specidfic regard to Access 2003.
The version has been loaded on my machine about 1 year as part pf Office Professional but this is the first time I have attempted to run Access itself.
Does any forum member have any ideas as to how this problem could be resolved.
Thank You
Rgds
Paul Langham
I am currently building a database for the company I work for that is fairly similar to the Northwind Database; however it is made from scratch so hopefully some of the common problems with that database won't find their way into mine.My problem is that when I go to my Orders form, I pick a customer from the main form, which creates a record on the Orders table. When I then go to the subform to choose a product/line item, I get the error in my title ("The LinkMasterFields property setting has produced this error: 'The object doesn't contain the Automation object 'OrdersT.") as soon as a product is chosen from the drop down list.
View 1 Replies View RelatedThe error is:
The LinkMasterFields property setting has produced this error: 'The object doesn't contain the Automation object 'tblIndividual.' '
Then it also gives me the same one on another table.
I think it has something to do with the link master/child fields. I've tried all kinds of relationships with the three tables and can't figure it out.
I've tried uploading the database here but it won't. It's on my Sky Drive.
[URL] .....
I have an unbound form with three tabs. On each tab there is a sub form. Each tab is a search form and each sub is a results returned. I have made everything unbound and set the sub form recordsource and its controls control souce on afterupdate of the main form search criteria. Works fine except for after some use the db decides the sub forms are not unbound and sets the record source and control sources.
I'm trying to do a
Me.PollingPlacesResults.Form.RecordSource = ""
Me!PollingPlacesResults!PollID.ControlSource = ""
but this does not seem to work in actualy removeing the record source and control source.
I'm getting an error message (informational only):
The object doesn't contain the automation object 'ClientID.'You tried to run a visual basic procedure to set a property or method for an object. However, the component doesn't make the property or method available for Automation operations.
Check the components documentation for information on the properties and methods it makes available for automation operations.
This happens when I start entering data in the field "productname" of a subform.
So I'm assuming something in the form or in the code of the form is referring to ClientID. but I've checked it, and there is nothing referring to it anymore. Well, at least as far as I'm aware of.
This afternoon access crashed without any error, it just closed. Upon reopening the DB again, all my work of the past one and a half week was gone. Normally I always backup the data, but these past days I didn't due to christmas and still working a lot too. So I forgot.
I did some redesigning in the process this evening, deleting and adding some fields and code.
I can't get rid of this error. Can anyone help? Or point me in the right direction?
Also the DB is 3.5MB in size. While it is completely empty. And I can't imagine that some empty tables, queries, forms and a bit of code can be so much. But that's for a later time to worry about I guess, unless one of you says: this and that, maybe that works... Otherwise, I would really be very glad already if the error disappears....
I am creating an form in a database and whenever one of my procedure's run it creates this error message:
The expression ON Load you entered as the event property setting produced the following error:
Member already exists in an object module from which this object module derives.
*The expression may not result in the name of a macro, the name of a user-defined function, or [event Procedure].
*There may have been an error evaluating the function, event, or macro.
An ideas?
table1 = 21 records
table2 = 21 records
table3 = 441 records
ex 1. (table1+table2)=(table3)
ex 2. (table1+table2)and(table1+table2)makes(table3)
as confusing as that sounds it gets worse
I want to find a way to do a true or false expression for the bottom formula.
There are nearly 195,000 possible combinations for ex 2, so you can see that after a short time you will find yourself doing repeats if you do not have something in place to tell you that you have done this combination before.
So, is there a way to have a msg box come up saying "Ooops, you have already tried this combination before"??
I have seen several examples of code referencing Me.objectname.
I have never used this and can't find any info on what or why to use the Me.
hello,
I am doing a project in vb with access 2000 as back end. I want to add the
photoes of employees in the access tables field and link to the vb project.i am
unable to do this. Help me how to do this(I am using ADO rt)
karunanithi r.
I keep getting this message when I try and input a product ID in the subform in my 'Order Form', the message says 'you can't assign a value to this object' and when i try to click the row below it says 'You cannot add or change a record because a related record is required in table 'Invoices'', how can I change this? do i have to relate it to the Products table and if so how do i do this? Thanks, Bob.
System Link:
Gamez System (http://www.savefile.com/files/5147388)
I want to run code when I change a page in the Tab Control object. The code I run depends on the page selected.
I tried the 'On Click' code of the page, but that didnt seem to run when I clicked on the pages.
The 'On Change' code of the Tab Control object seems to run whenever I change a page.
So the question is:
1/ Is it possible to run code when an individaul page is clicked on?
OR
2/ What is the syntax of identifying which page is selected?
If TabControl = 1 then
....
Else
...
????
Is there a way to tie a send object to a combo box on a form? I know I can write a query to pull information from a selection in a combo box using the [form][formname]thing. What I'm trying to do is I've created a database that allows many users to enter a request in a form. then when the form is complete they need to E-mail the form to their respective manager. I want them to choose from a combo box, then click on a button and the form is e-mailed to their manager for approval. I've gotten everything else to work accept for being able to choose the manager. I know I could also leave that blank and it will ask for them to enter the recipients name. If that's my only option I'm ok with that.
Thanks
PS If this issue has already been addressed I couldn't find it.
Hello everybody.
I have an Access application with a browse button that allows to search for files on computer. It does not work on all computers.
Computer A and computer B both are running XP Pro and Office Pro 2003.
Browse button works on A but throws ".. no object ..." error on B. It also works on a computer running Office 2002. Office was uninstalled [typical] and re-installed as full install on B and that did not fix the problem.
Here's my browse button code.
Private Sub cmdBrowse_Click()
' Prompts user for back-end database file name.
On Error GoTo Err_cmdBrowse_Click
Dim strFileName As String
Dim oDialog As Object
Set oDialog = Me!Xdialog.Object
With oDialog ' Ask for new file location.
.DialogTitle = "Please Select New Data File"
.Filter = "Access Database(*.mdb;*.mda;*.mde;*.mdw)|" & _
"*.mdb; *.mda; *.mde; *.mdw|All(*.*)|*.*"
.FilterIndex = 1
.ShowOpen
' If user responded, put selection into textbox on form.
If Len(.FileName) > 0 Then Me![txtFileName] = .FileName
End With
Exit_cmdBrowse_Click:
Exit Sub
Err_cmdBrowse_Click:
MsgBox Err.Description
Resume Exit_cmdBrowse_Click
End Sub
So, what's the difference between my A and B? Does it have to do with Activex controls?
Any help would be greatly appreciated.
Thank you.
I have an Access2003 database that contains a table. The table has 2 fields. One is a counter and the other stores a picture which is datatype ole object. I want to do a one time export of the pictures. I want to save the pictures as jpegs in a designated directory. I know very little about working with ole object datatypes. Can someone tell me the easiest way to do this?
View 1 Replies View RelatedHi,
I've downloaded a database which creates cascading combo boxes; it's called CreateCascadeCombo, for which I am grateful to whoever took the trouble to create it.
However, after it has done it's work and vreates the form in my own datbase, it says to make sure the latest DAO Object library must exist in the same database. How do I ensure that is is? I'm using access 2003.
I have created a database with Access 2007 and would like to remove some tables and reports that do not work as I had planned. I have tried to select them from the navigation pane and use the right click menu, however the delete option is grayed out.
Thanks
Jim
Is there a way I can print something that will tell what each table and/or query is dependent on and what depends on each one? I don't mean relationships, just the dependencies. I'm trying to clean up a database but it was built before I started and I use some of the prebuilt stuff and don't want to delete anything I need, but the query and table lists are excrutiatingly long. :(
View 4 Replies View RelatedI have a form based on a calculated query.
To allow users to edit some of the non-calculated fields I change the form's recordsource to a non-calculated query, but I still get "Database or object is read only".
I tried putting "msgbox currentdb.udateable" just after where I change the recordsource and I get the message "True" so db should not be in read only state...
If I open the form with the non-calculated query as source to start with, I can update the fields just fine.
What do I need to add to my code after Form_frmMyform.RecordSource="qryWriteable" to allow writing to the recordset?
I'm trying to force a user to enter text into a field. To this end, I've created a subroutine for the exit method of the text box they are supposed to fill out. I check to see if the .text property is null, and if so create a message box that pops up a notification telling the user they need to fill in said field. After that, I try to use the Me.txtReason.SetFocus (the text box is called txtReason) to return the focus to that text box, but instead it moves on to the next text box. Is there a way I can prevent the user from leaving the text box until they've entered some sort of data into it?
Thanks,
Dave
In using the Calendar object in a form I am wanting to be able to click on a date in the calendar and have this date be put in a text or date field. Is this possible?
Thanks in advance,
Dr. Bob