Specific Control In Form Detail Row
Feb 1, 2005
Hi All,
It's my first post to the forum, but I've browsed it a lot the past week! Lots of info here. Unfortunately I couldn't find an answer to my question, so here it is: A simple Form attached to a Table. In the detail section of the Form the Table rows are displayed (all simple textboxes) and there is a hidden button on the row. When I put the focus on a textbox in a row, I want to set visible=TRUE for the little button in that specific row. Obviously I want the button remain hidden for all other rows!
Is there a way to accomplish this, changing the properties of a control in a specific row? When I set visible=TRUE, all rows suddenly display the button.
Thanks for any input!
View Replies
ADVERTISEMENT
Aug 8, 2006
Hi
I have a standard form with Header, Detail, and Footer sections.
The detail section is populated by a mixture of queries and calculated control boxes.
When the detail section overruns its space, I get a vertical scroll bar to the right and then the footer is displayed. So, the footer always stays where it is and the scroll bar only moves the detail section.
Is it possible to get the scroll bar moving the whole lot so that the footer is not permanently viewable on the page and would appear after all the Detail boxes ?
View 3 Replies
View Related
Feb 24, 2015
I have a from that has information icons that opens a separate form to support users make the right choice on a form. With each information form users are able to choose "Yes" or "No" and then it returns them back to the form they started. I am having trouble setting the focus to the control the user original left the form from.
Form A
Control 1
Control 2
Control 3
Form B
Information for Control 1
Form C
Information for Control 2
Form D
Information for Control 3
For Forms B - C I would like the form to close, open Form A and then set focus to the control that the form was providing information for.For example, if you are on Form C and you make a decision, I want Form C to close, Form A to open and focus to be set to Control 2.
Code:
Private Sub image5_Click()
Dim sWHERE As String
Criminal_Background.Value = "Yes"
[code]...
View 8 Replies
View Related
Jan 28, 2014
Essentially I have a form_A with several tab's and then one list control box in each of those tabs. At present if you double click on any item within the control boxes your taken to another form_B with info about that item and when you close that from down again if refreshes form_A.
Is it possible to only refresh the specific list control box that is active instead of refreshing the whole form ?
View 4 Replies
View Related
Jul 13, 2015
I have a form based on a query in datasheet view. What i would like is to show only those records that fulfill the truepart of iif statment, and do not show the ones that fulfill the false part.
I have the following fileds in the query
month
currency 1 checkbox
currency 2 checkbox
sum
In the form, the control named month contains the following code:
control source: =IIf([checkbox1]=no;[month];0)
So this gives the appropriate months, but also shows the all other records with a 0 in the month field. I would like to get only the records shown that are correct with the truepart of the statement.
View 6 Replies
View Related
Apr 3, 2014
Access 2010. I have a form pulling from a query to create a "To Do' list of sorts. On this form is a button to open an input form for the corresponding record (I hope). When this button is used I want it to pull certain data for that specific line from the query and input it into the new record opened by the button. I know this is possible as I use another db that does this but I have not been able to figure out how to make it work in the new db.
View 14 Replies
View Related
Aug 13, 2013
I'm trying to create a report where I can use a section header as a hyperlink to show/hide detail, but only for that section. For example, my customer names are:
Code:
ABC Co.
ZYX Co.
123 Co.
If I click on ZYX Co., I want it to show the contracts for ONLY that customer:
Code:
ABC Co.
ZYX Co.
Contract 1
Contract 2
123 Co.
Right now, my code looks like this for On_Click:
Code:
If Me.Detail.Visible = False Then
Me.Detail.Visible = True
Else
Me.Detail.Visible = False
End If
But it shows and hides detail for ALL customers when I do this. Is there a way to only show/hide for the customer on which I click?
View 1 Replies
View Related
Oct 3, 2013
I have a database in which users have the ability to search by last name...nothing fancy there. However, the users continue to forget to click the Find Client button and instead just type what name they are looking for in the LASTNAME control thus changing the record that they are currently in!!!
I am looking for a way to have a msgbox pop up any time the LASTNAME control is changed. I found the code below but this works for the entire record and I don't want them to have to click Yes every time they make change.
Code:
Private Sub Form_BeforeUpdate(Cancel As Integer)
If MsgBox("Changes have been made to this record." _
& vbCrLf & vbCrLf & "Do you want to save these changes?" _
, vbYesNo, "Changes Made...") = vbYes Then
DoCmd.Save
Else
DoCmd.RunCommand acCmdUndo
End If
End Sub
View 4 Replies
View Related
Jun 4, 2007
I am looking for a way to only print the detail section (no header, no footer) using a print button on a form. it also needs to fit to 1 page. do i need code for this or is there a property that can be adjusted?
View 4 Replies
View Related
Apr 24, 2014
If there a way to set focus to a specific page from a command button on a Tab Control?
I tried Me.TabCtl0.Value = 3.
But it doesn't work.
View 7 Replies
View Related
Aug 11, 2015
I have a form that has a control to search the table for a specific record See code below that is on the AfterUpdate event of a Combo Box
Code:
Set rs = Me.Recordset.Clone
rs.FindFirst "[ClientID] = " & Str(Nz(Me![cboName], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark
[Code]....
What I need to know is how to make the rowsource based on the filter and not the table.
View 4 Replies
View Related
Jun 18, 2015
I have created a stock control system where i put stock that come in into a specific location i can put the same item over several locations depending of the size of the location or i can can put more than one product in a location .
The problem im having is when i do a order that say remove half of all the stock in it is split over more than one location i cant seem to get it to remove the stock from the location to show space available.
View 5 Replies
View Related
Jul 23, 2013
I want to hyperlink from a query direct to the relevant record in a specific form. I have a hyperlink field in the form which shows up in the query. When clicked in the query, this hyperlinks to the form but I cannot make it select the correct record in the form.How do I get it to select the correct record?
View 3 Replies
View Related
Sep 17, 2014
I am relatively new to Access and i am wondering why i cannot find a specific field from a table on the control source when i am and attached it to a check box.
I have created the field on the table, and now i want to attached it to the check box on a form however when i go down the list of control sources i cannot see it.
View 3 Replies
View Related
Mar 2, 2005
Right. I have a textbox say called TextA which is bound to COl A of my table THis table is being shown as continous forms (ie a set of ros in the detail section) and for each row I want to use a VB function to calculate another value from TextA and update the Value attribute of TextB.
I can't for the life of me figure out which event I can use to trigger this function so that EVERY row of the detail section has this function applied to it. I do NOT want to ahve to mouseover or click on etc any fields, I want it all to be calculated when the form has done loading. So far the best I can come up with is OnCurrent, which is no damn use at all - it does the first record and then once loaded the record which has focus.
Please please help - I've got a long night ahead of me and this is due to be finished am tomorrow - argh!
Cheers!!
View 5 Replies
View Related
Jul 17, 2013
I am a novice ACCESS user, so my questions may be elementary. In Access 2007, I have a query that presents the user with a list of the contacts he/she is approved to access. I want the user to be able to "drill down" to the detail form for a specific contact by double clicking on his last name, but I have not been able to find a property sheet for the last name field in the query to which I can apply the code.
View 14 Replies
View Related
Mar 13, 2014
I made a form with a subform - in the form header it just has the title, in the details it has details about level 1, then in the footer it has level 2 with all records assigned to level 1's ID. My problem is in form view the detail section takes up half the page, I only need it to take up an inch or so. I tried dragging it in design view and it seems to work in design view but once i switch to form view it still takes up half the page. I also tried changing the numerical height for the detail section in properties but it wont change.
View 2 Replies
View Related
Jul 2, 2013
I am trying to allow a calendar to search through a text box with a large amount of data in which will have headings using the date so i wanted to use a calendar search. Hopefully this will be be like the find function in word where you type (or in this case select a date) then click search or next which will take you to that specific date.
View 14 Replies
View Related
May 2, 2005
The record source of a form that I have is based on a user selection in a combo box in the header of the form. When the form opens there may or may not be any records to display. Currently I put up a message box when there are no records displayed but this only happens when the form is newly opened.
I was wondering if it is possible to have a label displayed in the detail section instead whenever there are no records to display, such as something along the lines of "There are no records to display with the selected option, please choose an alternative.".
I realise that I may be asking the impossible but I'm a member of the "If you don't ask you'll never know" club.
Tim
View 1 Replies
View Related
Jul 10, 2013
A user requested a change that would change the form header and detail back ground color to white when they click the button print record and then change the color back all in one click after the record prints. I keeping getting a run time error, type mismatch on the line where to code is to be changed. The colors are numbers not vbColors. I am using Access 2007.
Code:
Me.FormHeader.BackColor = "#FFFFFF"
Me.Detail.BackColor = "#FFFFFF"
View 3 Replies
View Related
Jul 31, 2013
I have a bound form which shows list of items in the stock. When i click on a button it should open another form which shows the details of item which we choose from the first form.the code which i have in click event of the form is :
Code:
Dim strCrit As String
strCrit = "PkID=" & Me.RadStocks
DoCmd.OpenForm "frmIssueRadItems", , , strCrit
It works sometimes but most of the time it gives error saying " syntax error(missing operator) in query expression 'PkID=Airmux 200E DC".
View 2 Replies
View Related
May 31, 2013
" Is it possible to toggle the visibility of a picture on a form's detail section for each row based on a query whether a certain condition is met? "
I have a form, which fetches data from a database and populates the content as a number of rows in the detail section.
For each row I want to test if a certain 'yes/no' condition is met on each query and the toggle the visibility on a picture that I have placed in the detail section.
I've tried seveal possible solutions now, like macros and VBA but haven't got it working.
Btw I'm using Access 2010
View 4 Replies
View Related
Nov 13, 2014
i removed the DIsTINCT in my query to move some field to be updateable on the form. Once I did that my detail section of my form was empty ..why and how do I fix this problem.
View 1 Replies
View Related
Feb 27, 2014
I created a search form. It has 6 unbound text boxes and 2 combo boxes in the header. Users can select values from the combo boxes and/or enter names in the other text boxes. These values all go into a filter on my Main table and the filtered results show up in the detail section. That used to work fine.
Now, I've been trying to convert the filter into a query and show the query results in the detail section instead.
(Why? Because of the ever-changing business requirements, of course!)
For some reason, the detail section went blank. All white. When I change the Data Entry property to No, it fixes that.
However, the text boxes for entering the search criteria will not accept any values anymore. It's like they are disabled.
When I change Data Entry property to Yes, I can enter text into the text boxes again. But the detail section blanks out again.
Windows 7 Professional, MS Access 2007/2010
View 2 Replies
View Related
Jun 18, 2013
I have a main form (Parent) along with a subform(Children). I want to have a button that generates a report with the Parent information as a header and the items in the subform as details. In addition, I want the report to show only the children that were recently added not all of the children.
View 1 Replies
View Related
May 28, 2015
I have table that I had to add a new field to which we update with a form. I tried to add a control for the new field but the field does not show up in the list for the control source. I am trying to add a list box to the form with a blank and 5 options.
I have attached screen shots of the table design and the form. The table has the field in datasheet view and I have manually entered a few entries in it but it still will not show in the control source for the form control. The top section of the form is where we enter and select the data for the new records. The bottom section (circled in red) autofills the matching record, from separate tables, for updating with the new entries.
I have added form controls for modified fields in the past so I am confused about why this is happening.
View 2 Replies
View Related
