Spell Number Help
Jun 25, 2007i'm trying to make a report to print checks
how do i make a query that outputs numbers spelled out??
please help
ADVERTISEMENT
Spell Check Contents Works , Need To Suppress The Spell Check Complete Msg Box
Apr 25, 2005Hi
I have sendkey "{f7}" on loss focus.
this works great as a spell check but then I get the mesage box that spell check is complete.
How do I stop this box from occuring?
Turning Off Spell Check?
Aug 25, 2006We need to enter the string INCL as a data value in one of our tables. When we try to exit the field, Access keeps changing it to INCLUDE. This occurs whether the value is entered via a form or directly in the table. I assume it is doing some type of autocorrect based on th spelling. There is no VBA code associated with this field.
Is there some way to turn this off?
Spell Checker Problem
Feb 7, 2008Hi firstly I want to say I am not a programmer or anything like that, I know enough about Access to get me by with simple things but after that i get a little stuck so please dont baffle me with loads of technical coding terms :D
Ok..I have a database with a form where the users enter a subject and description. I have a spell checker running on these 2 fields which works fine up to a certain point. If the users goes in, adds a new record, tabs off the field, the spell checker runs, etc then it works fine. If the user then creates a new record and it picks up a spelling mistake in the new record it jumps back to the previous record that was created and spell checks that again.
If you close the form and open it again before creating the second record it is fine. Could anyone possible shed any light on the situation? Below is the code that I am using (found it on the internet somewhere)
Private Sub Description_AfterUpdate()
'If the textbox contains data run the
'Spell Checker after data is entered.
If Len(Me!Description & "") > 0 Then
DoCmd.RunCommand acCmdSpelling
Else
Exit Sub
End If
End Sub
Private Sub Description_BeforeUpdate(Cancel As Integer)
End Sub
Private Sub Subject_AfterUpdate()
'If the textbox contains data run the
'Spell Checker after data is entered.
If Len(Me!Subject & "") > 0 Then
DoCmd.RunCommand acCmdSpelling
Else
Exit Sub
End If
End Sub
Spell Check Error In Access 97
Aug 2, 2005When I try to do a spell check in a Form by pressing F7 I receive this error:
Can't start the spelling checker because it isn't installed.
How do I get it installed?
Thanks!
Spell Check Current Record Only?
Aug 11, 2005How do you make the spell checker not cycle through all your records when you run it? As it is right now, when a user tries to spell check their entry into the summary block of my form it automatically starts with the first record in the database and goes from there.
This is in Access2003 BTW.
Loop Thru Fields And Then Spell Check?
Nov 4, 2005I have 15 fields beginning with the word Comment. (i.e. comment, comment1, comment2 etc)
What Im trying to do is create a spellcheck command button that will only check these fields and only on the current record.
I've managed to find this piece of code to do the actual check:
With Me.FIELDNAME
.SetFocus
.SelStart = 0
.SelLength = Len(Me.FIELDNAME)
End With
DoCmd.RunCommand acCmdSpelling
Question is, how do I get this piece of code to loop through any field beginning with the word 'comment' and check their spelling?!
Any help would be much appreciated
Spell Check Entire Subform
Mar 20, 2006I have a subform in datasheet view. I would like to put a button on the mainfor that checks all the subform records for spelling mistakes. Is this possible?
View 3 Replies View RelatedModules & VBA :: Spell Checking A Text Box On A Form
Jul 1, 2015I'm trying to get a spell check to work on a text box on a form. i've got it popping the spell check window after the box has been updated but i'd prefer it to just highlight the errors in red, rather than pop the spell check box. another problem i'm having is when it's finished spell checking the box it moves the form back to the first record. this is the code i'm using.
Code:
Private Sub txt_notes_AfterUpdate()
If Len(Me!txt_notes & "") > 0 Then
DoCmd.SetWarnings False
DoCmd.RunCommand acCmdSpelling
DoCmd.SetWarnings True
Else
Exit Sub
End If
End Sub
General :: Spell Check Options For Runtime
Apr 1, 2015I have a Access 2010 database running in runtime. What options do I have for spell check? I can bind to a 2010 Word spell check (if it is installed), but could I do a late bind to utilise any other office spell check? Tried to use a .net spell checker dll and get access to call out the text and get returned the errors? Not sure what options I have really...
View 1 Replies View RelatedSpell Check Provides A Gateway To Access Options Settings?
Apr 10, 2008Hi everyone and many thanks in advance.
I have configured my Access 2007 DB/app to hide the default ribbons and Options settings so that end-users cannot change the config or perform tasks that would jeopardize the integrity of the data. One of the other requirements on this project is to allow the end-user to launch the Spell Check feature.
It was simple enough to launch Spell Check from a button on a form. The problem lies in that the Spell Check feature has an "Options" button that serves as a point of entry to the Access Options that I'm trying to prevent the user from seeing.
Can anyone tell me how to hide or disable the Options button in Spell Check? I fear that this is not possible and I will have to choose between Spell Check and ensuring data integrity.
Many thanks,
Dominick:confused:
General :: Spell Check In MS Access 2010 Runtime
Sep 16, 2013When distributing a program using 2010 runtime, I find that the spell check doesn't work. Is there a spell-check .dll or is there anyway I can get a spell checker?I have several memo fields with long report-type data entry which is being keyed by mutants. Spell checking is essential to get an intelligible report.
View 1 Replies View RelatedForms :: Spell Check On Form Not Working Like Access Says?
Jun 28, 2013If you look at the attachment in access settings it says it is set how to auto correct and "INDICATE SPELLING".
in my forms/tables/queries... it will not bring up spelling mistakes or the sort.
Forms :: Auto Generate File Number Based On Number Of Records In Year
Jan 21, 2014I have a form [IUDATA]
I have a add record button.
I have a date field [DATEIN]
I have a text field [DRPNO]
If the [DPRNO] field is empty, I would like the user to have the [DPRNO] field be automatically populated after the user enters a date.
I'd like the format of [DPRNO] to be "dpr YY-XXX"
Where:
YY is the year of the [DATEIN] field and
XXX is number of records in that year.
So for example, if it was the 4th record with a 2013 date the [DPRNO] would be dpr 13-004.
Tables :: Consecutively Number Table Rows With User Determined Start Number
Jul 13, 2014I have an Access2007/SQL Server 2012 system with 20 users for an insurance company. The company does most of its business via a network of vehicle dealers around the country. If someone comes in to buy a motorcycle, boat, or recreational vehicle at a dealership they need insurance to take it home, and our dealers send the quotes to us.
The dealers, in turn, receive payment from us each month for their efforts. Some are paid a % commission on the premium, some are paid for each quote they send regardless of whether the policy actually sells or not, and some are paid a set amount per sold policy. (Yes, that is relevant information!)
We already have reports that tally the amounts due each dealer based on their payment scheme, but last month our bookkeeper had to write about 650 checks manually because the check writing is not automated. She'd look at the report, and then enter name, address, and amount (in digits and words) into Quick Books and print the checks from there, a horribly tedious process. I've been asked to print the checks from Access. Basically one click would print all 650 checks.
I've opted to use a Make Table query to move the commissioned dealers amounts to a single location, and then to run two append queries to add the records from those paid per quote and those paid per policy. At the end of the day, one table contains all the information necessary to print the checks...except one.
The check number.
I need a way to sequentially number each record in the new table with a user generated starting point, the first check number.
By the way, the check blanks are on standard letter sized paper, three to a page, with tear-off perforations to separate them, in case that information has any relevance.
I think the best way to accomplish this is from the report itself. I've created a blank field on each record for the check number, and what seems most logical is that the sequential number is generated on print and written back to the table, rather than just generating all the numbers at once. That way, should print ever be interrupted, it will be easy to take up where we left off.
Number Fields In Text To Number Field, Formula For Fiscal Year
Nov 26, 2004Date of Birth (DOB) field etc. in one program are text - how do I make another file with the same data into number fields for Date of Birth field etc? When I copy data to file that has number fields the 09252004 is changed to 9252004. Can I get reports with the correct Date of Birth in them by moving data from text file to number file?
There is data entered monthly in file and formula has been set up for January, February etc as ---quarter: Int(([month]-1)/3)+1. I would like formula for the fiscal year for April to be counted as month 1, May - month 2, June as month 3, July as month 4, August as month 5, Sept as month 6, October as month 7, Nov as month 8, Dec as month 9, Jan as month 10, Feb as month 11 and March as month 12.
Thank you
Reports :: Generate Number Of Rows In Report Depending On Number In Another Field
Nov 4, 2013I have a form where we fill in information for supply of equipment to employees.
Each item must be signed for on a printed report.
I am encountering problems trying to create enough rows in my report detail for each signature of the items supplied.
For example, on the form I will select the "equipment" - 4 hats supplied and 3 boots. On the report I want the equipment set as the group and the detail to be a number or rows which equals the number of selected items. therefore under the Hats group heading I want 4 blank rows which are made up of 3 text boxes - Print Name, Signature & Date and another group heading for boots but with 3 lines.
Tables :: Procedure To Restrict / Stop Auto Number Increment For Certain Number Of Record Count
Mar 16, 2014I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
View 8 Replies View RelatedAuto Increasing A Number, Depending On Maximum Number When Condition Is Met
Sep 18, 2006Hi,
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate()
Dim medlemskod
medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod")
Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000")
End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
Grateful for any advice! Thanks!
Find The Lowest Number And Place The Number And Column Name Into In Field
Dec 15, 2005I have a access table with 32 columns and 42,000 rows of numbers. I need to find the MIN number in the row and if the MIN number has duplicates then I need them all placed into another column by column name.
Example:
Starting file
DEST,ORIGIN1,ORIGIN2,ORIGIN3,ORIGIN4, ETC
05512,3,2,4,2
ENDING table needed
DEST,ORIGIN1,ORIGIN2,ORIGIN3,ORIGIN4, NEWCOLUMNname
05512,3,2,4,2,2 ORIGIN2 ORIGIN4
Where the new column name contains the MIN number in the row and all of the associated duplicates column names.
General :: Getting Invoice Number Field To Auto Generate Next Number
Jun 2, 2014I'm trying to get an invoice number field to auto generate the next number, keeping the format as "00000"...this is what I have, which gets the next number but drops the leading 0
Code:
Private Sub Customer_AfterUpdate()
If Len(Me.[InvoiceNumber] & vbNullString) = 0 Then
Me.[InvoiceNumber] = (DMax("[InvoiceNumber]", "[tblInvoiceNumber]") + 1)
DoCmd.RunCommand acCmdSaveRecord
End If
End Sub
invoice numbers are 04024, 04025 etc...how I keep the formatiing?
Auto Number, Year, Month Number Combination
Apr 20, 2008I need to create an auto number for service calls that show the following:
year as 08, 09 etc, month as a letter, Jan = A, Feb = B etc then an incremental number starting at 300 for each month/year combination.
So for example: 08A300
Can anyone help me as I am stuck?
Query That Result Incremental Number, With No Auto-Number
Sep 10, 2006Well, here's my database :
Name : String
Address : String
I want to add an automatically generated column, "no.", to show which number it's in. Like this :
No. Name Address
1. A Unknown
2. B Unknown2
The problem is, I can do that with Auto-Number, but if the user delete row 1, the number in row 2 is still 2, not 1.
Is it possible to generate query that have "no." column in it ?
Report Prints The Same Number Of Times As The Number Of Records
Jul 10, 2006I've created a report and report has the same number of pages as the number of records that it's displaying.
If there are two records, the report has 4 pages...the first 2 are the actual report and then the other 2 are a copy. If there are 3 records, the report would have 3 copies (...6 pages).
Any idea how to change this so that I have only one copy of the report?
General :: Auto Number PK Change Starting Number?
Dec 18, 2013I have a table with an auto number PK. This table will contain orders. I'd like to use the PK from this table as the Invoice number on the invoice. I'd like to have it start at a number other than "1" just because it looks better on an invoice. I don't know how to do this. I looked at the table design to see if there were options available to me there but couldn't find anything. Is it possible? (I do not know how to use code.)
View 7 Replies View RelatedModules & VBA :: Sequence Number In Query Use A Starting Number
Sep 20, 2014creating sequence number in a query using a starting number. For example i want to use the starting sequence number as 5
---SEQNUM---------COLOR-----------
-----5------------------blue--------------
-----6------------------red---------------
-----7------------------orange-----------
-----8------------------black-------------