Stopping Field From Getting Focus
Sep 19, 2005I have 10 fields on a Form. When I load up my Form, I don't want any of them to have the cursor in it.
How do I do that?
I have 10 fields on a Form. When I load up my Form, I don't want any of them to have the cursor in it.
How do I do that?
I have a database that requires new data from an Excel file every month. I have created a linked table, and the the user updates links each month, pointing the table at the new Excel file.
This has been working nicely until today when the Excel file arrived with different column names! The user linked the table as normal and started to run the database, but the queries were looking for different field names so the whole thing crashed. I changed the Excel column names and tried re-linking the table, but all the queries had changed so that the field names were things like "Expr1: [Depreciation_currentmonth]" even though that field name now existed.
Does anyone know of a way of stopping this happening, or restoring the queries without ploughing through each one manually?
Abi
I am currently stuck on set focus property. I have a main from with nested subform. I am trying to move the focus from last field of the subform to another field on the main form.
Customers(mfrm)....>Addresses(sfrm)...>Orders(sfrm Add)......>OrdDetails(sfrmOrders)
Now I have a field name [Securedesign] in frmOrderdetails and I want the tab order to navigate to field [CustomerID] in frmAddresses which is a subform to frmCustomers.
-How can I address the fields on my forms? I just want to create a button that increases a value by one on click.I tried
FORMNAME.FIELDNAME = FORMNAME.FIELDNAME + 1
FIELDNAME = FIELDNAME + 1
FORMNAME!FIELDNAME = FORNAME!FIELDNAME + 1
but the button does nothing. And that is all I found by googling.
-How to focus a field at the beginning? I want to be able to start writing always in the same field.
FIELDNAME.SetFocus
does not work. I dont know if I made any mistake during creating tables and forms, but these codes should actually work, shouldnt they?
I moved the Address field from third postion to first position, so that clicking on a list box places the address from the List Box into the Address field. I adjusted the bound and source boxes and it works perfectly. The cursor now points to the Last Name field (second position, which it did originaly.) I would like the cursor to point to the Address field so as not to confuse the operator. How can this be accomplished? I am sure the correct Event code will do the tick.
View 2 Replies View RelatedLot of questions from me today but anybody know the vb for ongotfocus of a field for the cursor to go the beginning of a field
View 3 Replies View RelatedWhen I insert this code:
Private Sub Phone_Click()
Me.Phone.SelStart = 0
End Sub
Access will no longer make an MDE file. I was trying to make it so when the Phone field was clicked in the focus would be at the beginning of the field.
If I remove these lines, an MDE is possible again. I have tried it at the beginning and at the end. Any thoughts?
I have a SSN field and i want it to have the dashed (I got this part down.) But when I click on the field to copy an paste it I want the dashes to disappear. I am thinking What ever the code (if any) would on in the fields onFocus event. I don't want it to copy the dashes.
View 14 Replies View Relatedhow to set focus in first or last line, but I need set to second.
View 11 Replies View RelatedI have a form (Home_Interview_Form) with several subforms (AirFresheners, Pesticides1 etc), and I would like the cursor to move from the last field in one subform to the first field in the next subform on keydown. I have written the following code, but instead of sending the cursor to the first field (PestSpray) it is going to the next field (PestSprayCom) in the subform for some reason. I am using Access 2013.
Private Sub Fresh2React_KeyDown(KeyCode As Integer, Shift As Integer)
Forms!Home_Interview_Form!Pesticides1.SetFocus
Forms!Home_Interview_Form!Pesticides1.Form!PestSpr ay.SetFocus
End Sub
I am new to Access and to the forum. I made a check printing system
table name = 'burgan'
form name = 'burgan cheque'
Fields = 'PV' and 'cheque' and 'Beneficiary'
I have inserted a button (Command31).The function I would like to add on clicking the button
1. it should chose the highest value in both fields (PV and cheque)
2. Create new record
3. Increment it by 1 (both fields 'PV' and 'cheque')
4. the focus should stand on 'Beneficiary' field.
How do you set the focus on the first field in a modal form when it opens?
View 3 Replies View RelatedHi all,
I have added an OLE WordPad object to a form. However, when I use the form, I cannot select/give the object focus to activate it. Even if I right click the object, it give me the correct popup menu. :confused:
I am using this object as I am having troubles with Memo fields. I use a form to update records, one field of which must be greater than 255 characters long. When I press my update button (it just runs some code to turn off warnings, run two simple update queries and the turn the warnings back on) the update process seems to complete. However, if I go to the table/refresh the form contents, only the first 512 characters are displayed and the last few are strange system characters.:confused: This occurs no matter what I do. I was tole that copy/paste operations can mess memo fields up, but I tested this by using a fresh field and typing everything in. Hence I am now trying the OLE object to get around this problem. :confused:
Any ideas peeps??
Cheers,
Matt
Right I have Windows 7 Ultimate because I am learning Russian and I have created an English Russian dictionary.
Now using Ultimate to go between English Latin alphabet and the Cyrillic alphabet you have to press ALT + SHIFT.
Its awkward and it often doesn't register first time.
Certain fields in my database use the latin alphabet while other fields use the cyrillic alphabet.
Is there a way that on focus of a field I can get the keyboard mapping to ensure that it is correct either English or Cyrillics?
In order to prevent inexperienced users corrupting the design of the Forms, Reports etc. of my Access DB, I have unselected the relevant options at Tools – Startup and it doesn’t display the Objects window. However, I find that when I press F12 key, a pop up window appears with ‘Save As’ ‘Save ‘frm……’ To: As …..’ with OK and Cancel buttons. Though a user can save the form with a different name and this does not interfere with the proper functioning of the DB, I find this an irritant pop up window. Is there a way to stop this pop up window?
View 2 Replies View RelatedI have a form with a command button which sends a message containing information from fields on the form. This works fine. Problem is, the user can use the "Email Button", when there are fields not filled in. Is there a way to stop the email message from being sent?
View 2 Replies View RelatedI have a customer who is concerned that their access database may be copied and used by a competitor. I have told him to set up passwrods for all users amd hide the system file which stores the password info so database won't open off site if copied. He doesn't want to do this though. Is there any other way, possibly by encrypting it?
Regards :confused:
I've got an incrementing invoice number that is just a +1 of the last invoice number. Had a problem today where one user was creating an invoice and took a while to complete the record. As soon as the record was created the invoice number went in as 123 but the record didn't save until she had filled out all the form. In the meantime someone else started to create another invoice and ended up with 123 as well because the previous record hadn't saved. Does anyone have any suggestins how I can stop this from happening? I can't save the record straight away, which would be the obvious answer as they need to fill out quite a few required fields before the record is saved so that they don't have incomplete records.
Thanks
DBL
G'day All,
I have a table that allows for data to be automatically imported into it or manually entered. When data is automatically entered into the table the number field shows the number as a decimal, but when I manually entered data into the column it rounds it up or down to the nearest whole number.
I have checked the the decimal place setting on the particular item and it is set to allow for 2 decimal places the format is fixed and the number itself is Long integer
Any help would be a appreciated.
I have two tables. Table1 has two monetary value fields (both set with auto decimal places) and table2 has one monetary field. Then I have an append query which appends all data from table1 to table2, except for the monetary fields which are added up and then appended into table2's single monetary field (which also has decimal places set to auto). The formula I use for this is as follows:
Total Value: [Gross Value]+[Adj'mt Value]
Problem is, the total figure appended to table2 is rounded off to the nearest integer, whilst still displaying decimal places (45.00, 201.00 etc). Is there some sort of variable to set in the query to stop it from rounding off the result of this formula?
Any help would be appreciated.
Thanks.
I have a booking form database
With a date field.
I want users to be warned when they try to enter a date that already exists in the database in order to avoid double booking:confused: .....
all suggestions appreciated:)
Quick question, (and hopefully a quick and easy answer).
I have a check box and a combo box. If the check box is not checked and a user clicks on the combo box, I have a message box that pop ups and informs the user that he/she must click the check box first. However, after they ok the message box, my combo box shows it's dropdown list.
Is there a way to stop the dropdown from occurring when they click on the combo box?
Thanks in advance.
I have a macro which automatically opens a form. I then want the form
to scroll through all the records by itself until it gets to the last
record.
I've got it scrolling through the records, but it doesn't know when to
stop and throws up an error message.
hi,
can anyone tell me how to stop additions and edits on a particular record in a form, plus the subform that the main form contains,
im trying to put the event behind the change of a text box, shipped date, so when its changed you cant add or edit the record which is the order.
cant anyone point me in the right direction?
cheers
On my switchboard i've got several forms, whenever i click a link to a new form that form opens in a new window, how do i stop this so that they all open in the same window?
View 2 Replies View RelatedI am using to select and append data to an output table. Everything is working fine until the last step. The last step appends all the data to an output table from the initial table. The intermediate steps select the data to output.
"AddExpenseToOutput()" is stopping about halfway through the list of criteria. Initially I thought there might be a null in the list, but it doesn't look like there is after dropping everything into Excel to manipulate.
Code:
Option Explicit
Dim rstAccount As DAO.Recordset
Dim rstAccounts As DAO.Recordset
Dim CAccounts As String
Dim Item As String
Dim AccountKey As String
[Code] ....