I am trying to limit the number of records displaying in a subform [amendedLoans] by selecting only those records that have the same ClientID as the mainform [Customers] and the same loan number as the subforms parent form [ClientAccounts loan changes].[loanno].
I have no difficulty selecting records just using the clientid but as soon as I add the reference to the subform [loanno] field I get no selection of records. I suspect there is an error in the where clause for
[Amended Loans].Loan)=[Forms]![customers]![ClientAccounts loan changes].[Form]![LoanNo]) .
I have built the clause using the expression builder and have had many attempts all ending up with the same result. I'm now at a loss as to where to go from here....
I'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!
I have a form with a tabbed control on it. The tabbed control has 4 tabs that each have a report on them. When I select a company name on the main form, I requery these 4 reports to show data related to that company.
For some strange reason, 2 of my reports requery with no problem, and 2 of them give me a message that the report can't be found. Here is the code:
Code: Private Sub cboCompanyName_AfterUpdate() On Error GoTo cboCompanyName_AfterUpdate_Err ' DoCmd.SearchForRecord , "", acFirst, "[CompanyID] = " & str(Nz(Screen.ActiveControl, 0))
' After selecting a company, requery the subreports to display the appropriate data
As a side note, if I chose the company, say "ok" to the error, and then go run the queries that these reports are based on, I get the correct records. Also, if I chose the company and run the 2 failing reports standalone, they work fine, so I know the problem isn't the reports or the queries themselves.
I have also checked and rechecked for any spelling mistakes and have found none. I should mention that the error message is "Programs cannot find the field 'SubrptCompany_Payback' referred to in your expression".
I have an Access 2010 Database frontend to SQL Server 2008 Backend. So far there are 3 Tabs in the Navigation System. The first one is the primary Data Entry form which has a tab control with 3 subforms.
Here's the problem. The database is designed to track potential members based on different types of Ads. The primary Data Entry form holds all of the demographic data for the person that called in response to an ad. The first tab has a subform to track how many times that person has contacted us. The second subform tracks which advertisements the person is contacting us about and the third tracks which Events that person attended. There is no correlation between contacts, Ads and Events.
On the Advertisements we have about 7 different types of Ads we do and each ad can be run multiple times on different days. We want to be able to track which Ad the person contacted us about. The Advertisement subform has a comgo box for the Ad type and a combo box for the ad date. the source for the combo box for the ad date includes the combobox for the adtype as the criteria. That criteria is what's giving me the problem. I've used:
I have a multi select list box which I am trying to use to open another form and apply a filter based on the user's multiple selections.
List box - lstCatergories Main Form - frmSuppliersSummaryCategories Subform on Main Form - frmSuppliersSummaryCategoriesSubForm
The Subform contains the text box CategoryID
Here's my code which nearly works...
Code: Private Sub cmdFilterSuppliers_Click() On Error GoTo Err_cmdFilterSuppliers_Click
Dim strWhere As String Dim ctl As Control Dim varItem As Variant
[Code] .....
My problem is that the control "CategoryID" is on the subform and I'm having massive problems trying to reference it. This is the part of my code that won't work:
1) I have a Main form with a tabbed form that has two subforms attached to it. How do I move the focus from the last field on the first subform to the first field on the 2nd subform without using the tabs at the top of control.
2) Subform #2 is a dependent form of subform #1. Since I can have many products associated with the customer form, I have added an add new record command button using the wizards. The button does not take me to the first field on the 2nd subform it just sort of blinks.
I'm trying to get the value of a textbox on one of my subforms and can't seem to get it properly referenced.
I have a main form Main with a tabcontrol having two pages. One page is Timesheets. Timesheets has a subform called Detail_data. On the detail_data subform is the text box Time_In that I want to reference. I can get to controls on the timesheet page but not on the detail_data part.
I've distributed a MS 2003 database to another office 1000km away using 2003 as well. The calendar control doesn't seem to be working. I'm assuming that the MSCAL.oxc isn't referenced. Is there a way I can do this programatically without actually having to talk someone through the referencing process over the phone??
I have been using a calendar control on a subform and have now split the data into a tabbed form with 4 subforms. The calendar is now entering the date selected into the first record of each subform instead of just the one on the subform that has the focus.
Do I need to add the calendar control to each subform now or is there a way to reference the correct form in my current code?
Private Sub Calendar_Click()
' Enters the selected date into the DateCompleted field
I have a form called "FormA" within that form i have a tab control and one of the pages is called "Page1" inside that page1 i have a subform named "subform1" and finally inside subform1 i have a field named "field"
what would be the correct syntax to reference the value of the field???
been messing with this for awhile and am getting a headace, was hoping someone can help
I'm trying to check if a control on the subform is null. I've the following line of code:
Private Sub Form_BeforeUpdate(Cancel As Integer) If IsNull(Form!FrmOrderInfoMain!SubFrmOrderInfo.ItemC ode) Then Msgbox "Empty ItemCode" End If End Sub
..whereby FrmOrderInfoMain is the parent form and SubFrmOrderInfo is the subform. I get an error for this code as Im not sure what is the correct code to use. Thanks for the help.
I've been trying : double click a field in a subform and paste the query results into excel. I already have good code to paste in the recordset, but this recordset must reference a control value in a subform.
The query works and shows the proper results manually, but when I run the Sub it throws a "run-time error 3061: Too few parameter. Expected 1."
I can't seem to set the parameters right. Tried EVERYTHING--except the RIGHT thing.
I'm using Access 2003. In "References" (Tools > References > Browse...), I've added in "Microsoft Windows Common Controls 6.0 (SP6)" (c:windowssystem32mscomctl.ocx).
I've then created/inserted an instance of the control "Microsoft ListView Control 6.0 (SP6)" on a Form ("MyForm") and given the listvew control the Name "MyListView".I wanted to decorate MyListView with some custom methods so I've created a new class module ("DecoratedListView") which contains a member field called "lvw".
I want 'lvw' to point/reference to MyListView, but I don't know what reference type to use in its declaration. Importantly, I also want to capture lvw's ColumnClick event.
I've tried:
Code: Public WithEvents lvw As Object Public WithEvents lvw As Control Public WithEvents lvw As MSComctlLib.ListView.2 Public WithEvents lvw As MSComctlLib.ListView Public WithEvents lvw As CustomControl
and none works when I
Code: set lvw = Forms!MyForm.MyListView
The first try (Object) doesn't even compile. I get the exception "Expected: identifier" The second try (Control) doesn't compile either. I get the exception "Object does not source automation events" The third try (MSComctlLib.ListView.2) doesn't compile and throws the exception "Expected: end of statement" The fourth try (MSComctlLib.ListView) compiles but fails at runtime with the exception "Type mismatch". Using TYPENAME() on the control returns "CustomControl". The fifth try (CustomControl) compiles but fails at runtime with the exception "Object or class does not support the set of events".
I can't believe I'm the first person to have tried to capture an ActiveX Control's events in a separate class.
I have a form (named frmAddSession) with a combo box (named Band_Name) and lets say i have it displaying the band "Band A"
I have a query where the criteria is [Forms]![frmAddSession]![Band_Name]. when i run the query the results are blank. but if i type ="Band A" it works just fine.
why won't my reference to the combo box on the form work?
In a series of deductions to try and figure this out, my form only has the one combo box, and my query is based on only one table and only has the one field.
I've set hyperlinks to a couple of forms using the hyperlink address in properties. All works fine, and I've done it this way because the cursor changes to pointy hand when hovering over.
However, I need to navigate to a tabbed form in a main form.
Is there a way of doing this? I've been searching all sorts, and the most probable is to concatenate the destination?
description##Page1#page2... or something like that?
Is this correct?
What ever I've tried doesn't work, this includes ...
adding the main form destination to Hyperlink Address, and tabbed form in the SubAddress (Can't find main form)
Using the hyperlink builder. (Can't find anything)
I made a form for our office to search data through our MS Access database. It was a big hit, and people started using it. Then came another request to make a new form - to search through another few tables. This was a big hit too.
The same process repeated and now I am stuck with 3 different forms, each with it's separate code and selection options.
How can I combine all of them into one and have 3 different tabs for the 3 existing forms without losing all the coding and software flow that I have already created?
I'm not a complete Access beginner, but I'm also far from an expert and not much of a programmer. So I feel that there's a chance this might be a relatively simple issue I'm merely making more complicated than it should be. But hopefully someone can at least point me in the right direction. (For the record, I'm using Access 2007.)
I've created a form to which I've added three tabbed pages. Each of these pages contains a subform the user can use to enter data into three different tables. The tables' relationships look to be set up properly, and there doesn't seem to be a problem with typing the information into the subforms. However, I want a single button press to update the information across all the tables and clear all the fields in the subforms so that the user can then go about entering the next person. I can't seem to figure out how to do this.
I downloaded a number of template databases from Microsoft, and some of them have exactly the kind of functionality I'm looking for: a "Save and New" button that inputs all the data across the tabbed pages and then lets the user start over from scratch with blank forms. I've spent a fair amount of time studying the various forms in the Student template, but I'm having absolutely no luck replicating that functionality. I basically want everything to work almost exactly the same as that, except with different field and table names (of course).
Can someone please explain what I'm doing wrong and how I might fix things, or at the very least how to look at the Students template database to get the information I need on how to do this myself? I'd be very grateful for any help on this matter. Thanks.
Public Declare Function LoadImage Lib "user32" _ Alias "LoadImageA" _ (ByVal hInst As Long, _ ByVal lpsz As String, _ ByVal un1 As Long, _ ByVal n1 As Long, _ ByVal n2 As Long, _ ByVal un2 As Long) _ As Long
[code]...
I can load the little icon on the left on CaptionBar.It works very well on overlapping mode but no on Tabbed documents. How to works with tabbed documents mode?
everything has been working perfectly except for date diffs.I am simply using an unbound text box with a date diff as a calculator of sorts, which meets the form's purposes. Everything works fine when the two dates are on the SAME tab using the formula ' =DateDiff("d",[DOB],[date of treatment]) ' entered in the textbox.
The number of days between treatment and DOB pops up immediately.
However, when trying to create a second date diff between two source text boxes on SEPARATE tabs, (i.e. DOB on Tab 1, and date of treatment and the unbound date diff calc box on Tab 2) the date diff does not work unless the form is opened, and closed again. As in, the only time the number of days pops up is if the form is closed and opened again.
I have a form which consists of four (4) tabbed sheets. The first sheet is the main form and the other three sheets are the linked subforms.
Pressing the tab key on the keyboard navigates from field to field in each individual form; however, I would like that when I get to the last field of each form, pressing tab moves to the next sheet or the first field of the next subform.
The problem I am getting is that when I get to the last field of the main form and/or subforms, hitting the tab button creates a new record in the specific form, which I do not want. I want to just tab to the next subform.
I have an unbound form with 2 tabbed Controls on it.On the first Tabbed Control my command button code works but not for the 2nd tabbed control. Although the command buttons themselves work as far as going to the appropriate record.
What I mean by this is that I use code to enable/disable the command buttons depending on what record you are on.
Example: If there is only 2 record, the other command buttons will be disabled, Do I have to refer to the Tab Control ?
