It's been a while since I've been on the boards. Good to see lots of the same folks are still here. :D
I've got an interesting problem. I have a sub that calls another sub. Pretty simple there. The problem is that when sub A calls sub B, sub B does not appear to run. This is all sub B does:If Not IsNull(Me.txtNumber) Then
Me.txtNumber = Me.txtNumber + 1
End If
The weird thing is, sub B runs just fine if I run the sub B in step mode. If I set a break point and use F8 to step through the code line-by-line, it runs just fine. If I take out the breakpoint, the code no longer works.
Anybody have any ideas? I'm running Access XP Sp2 on Windows XP SP1. Thanks.
in my db i have used in one scenario two separate forms to fill in one record in a respective table.
the user fills out the details in the first form for record 1, presses NEXT, and fills out the remaining details in the second form for record 1.
every time form 1 will be opened, it will need to be at the end of the records (to add a new one of course) so i have used this code in my form 1 open event DoCmd.GoToRecord , , acNewRec
this is fine. however, i have a dilema. when i place that code in form2 also, it skips one further place to the next record(record 2).. and if i dont put any code in form 2, it will always display the record that has just been added previously..
so basically what i need is something to tell form 2 to carry on adding details into the same record that form1 was just on..
I have several subform tabs and one that I have updated no longer shows up when I run the form on Form mode. The tab is there but no content or details of the subform
OK, the syntax below works awesomely in a form. The SSN number is pulled from the main table and dropped into a bunch of text boxes. The only text box that is bound is called [sub#] and is stored in the supervisors table, 6 sub's per supervisor and the supervisors SSN is a child of the main table (tried to keep redundant data to a minimum). Now I need to know if there is any way to perform a similar trick in either a query or report using the [sub#](SSN equal to that of a main table entry) field to call up the record from the main table or from a query to use in a report?
Example of working syntax from form... Private Sub Combo48_AfterUpdate() Rank1 = Combo48.Column(4) Sub1 = Combo48.Column(0) Last1 = Combo48.Column(1) Rank1 = Combo48.Column(4) First1 = Combo48.Column(2) MI1 = Combo48.Column(3) EPR1 = Combo48.Column(5) Rating1 = Combo48.Column(6) Next1 = Combo48.Column(7) End Sub
Can you step into an Event Procedure line by line in Access? I toggled the Breakpoint at the End Sub of the Event Procedure, clicked in the middle of the sub, and pressed F8. Nothing! I do this all the time in Excel.
I have been struggling with what should be a very simple task, at least I would think so. Here is what I have. My customer provides me a rolling 8 week forecast. It looks like this.
So you can see that the first week is always the closest to the current date, and every week a new forecast comes out. The problem is, there are over 900 rows for each 8 week rolling forecast (lots of parts and ship to locations).
I think the best way to handle this is to use Access Database and query the data. But I can't seem to get the query right.
I would like to be able to compare the closest week's forecast with the actual quantity bought. Which means I need to line up the calendar week of the forecast given date with the calendar week of the forecast week. I have attached an example.
So you know, I have been using pivot tables for a year now, but the excel file is 50mb and I am out of rows...so access would be nice. Plus, once I can get this figured out, I will be able to link it to my consumption table and generate on the fly reports for management.
I have a switchboard and when I click a certain button ... it opens a prompt popup.
In the popup you enter the required "item" and you hit enter or "ok"
It then does a search for the specified "item" and brings up that information. At that time I would like to have a calculator pop up for the user to use. (newb) How in laymans terms do I get this to work ?
In my "forms" Design View I have: Switchboard and Calculator
In my "Queries" I have query 1
In the tables section I have : Sheet one (this is were the query is getting its search info from. Switchboard items
Is there something I can add to my query to get it to open the calculator form ? Or is there some other way without using additional buttons to do this.
Hi I have a set of membership records which have data input via a simple form. When looking for a particular record I use the standard Find menu item on the whole record set from the Form view, and move through the results using the Find Next button. Is there a way to move back through the records when I have got to the end of the results. eg. there may be numerous members with a surname Smith and I can move the the Smith records by using Find and Find Next but if I have moved past the record that I want is there a way of stepping back through the records? Apologies if this is a really obvious question
Set Conn = Server.CreateObject("ADODB.Connection") Conn.Open("Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & Server.MapPath(" coordinatordbTC.mdb")& ";PASSWORD=123456") ================================================== ===================================
I have been trying solve this problem for a few days. however, the best i can come into is the above code, however , the following error still approached me.
================================================== =================================== Microsoft JET Database Engine error '80040e4d'
Cannot start your application. The workgroup information file is missing or opened exclusively by another user.
I'm new to access, and have discovered its easy to write large queries by breaking them up into smaller queries and having each subsequent query reference the one before it. My problem now is that I want to combine these queries into a single query, so as to make it easier for anyone who comes after me to edit/understand what was done. I can't seem to find a good explanation of how to do this, but it seems like there should be a way.
There is an Access application somewhere in shared drive.
100 users open this application using a batch file which copies this database on their c: . They start using this database and the master database gets replicated real time. I am not sure if all the database are replicated as it is copied everyday ( so that each one of them has latest version of the application )
Is it possible ( I know it is :) ) but i am not able to figure out how it is happening.
What would trigger an error to occur if there has been no changes to a DB.
My error # is 2427 (You entered an expression that has no value).
This error occurs when I click on a command button to open a report. When I debug, it sends me to an IF statement that I have loaded in the On Format of the report.
This worked perfectly fine before - the If statement is simple, if a value is true, then it changes a box to bold and if the value is false, the box in the report remains the same weight.
I am not understanding why it is saying that I have entered an expression with no value when the IF statement reads both the true and the false of a chkbox and adjusts the box accordingly.
Can someone explain why this is occuring? Im litteraly stuck.
Hi, I have a form which has two separate subforms in it. When the user selects a record in the first subform, I want the values of that record to write to the second subform's fields. OnCurrent works when there is more than record in the subform. My problem is two fold, one I don't want my copy code to run when the form loads and I need it to copy a record when there is also only one record in the subform.
Which event do you recommend?
Also, does anyone have a suggestion on how to allow the user to tab through a form, but really only record by record (with the keyboard) and not having to go through all the fields before getting to the next record.
Hi, I'm a little confused here. I'm using the following on one DAP and it works just fine. When I add it to another page, it does not work. Any ideas?
<SCRIPT language=vbscript event=onclick for=Save> MSODSC.CurrentSection.DataPage.Save() msgbox "Record Saved - you may continue to edit or exit your browser.",64,"Saved" </SCRIPT>
I have a text box (memo field) that the user enters a description. This is sometimes more then one paragraph. In a text box you cant hit enter and goto the next line (or paragraph). I would like to to this? can it be done?
I have a text box (memo field) that the user enters a description. This is sometimes more then one paragraph. In a text box you cant hit enter and goto the next line (or paragraph). I would like to to this? can it be done?
Can someone please help me. I was in the code view of my database and accidentally deleted a few lines of code and now everything i do is coming up with the same error message
Module Not Found
For every form I try to open it does this and even my buttons to close form and to exit system do not work.
Has anybody had this problem before?
Would anybody mind taking a look at it if I sent a zipped version? my email and msn is nicholaseary@hotmail.com
I have installed on my PC, WindowsXP sp.1, MSaccess versions 97 and XP. After I have tested some databases, MSaccess 97 don't works successfully more, but XP version works good. I can't modify files mdb. Access works like in run-time mode: bars and commands reduced, standard icon of access absent, database window absent, ecc. If macro autoexec or a form that play at the start of mdb are present, mdb works but it is impossibile to modify it. Otherwise mdb dont works, I can see access window with only menu files and window.
I have removed access and after yet installed it, but it don't work successfully.
maybe other application leaved files (or modification in file registry) that install procedure of access97 cant rewrite? And that dispose access 97 to work in run-time mode (or like)?
I am hopeless. Can You help me? Can you give me a list of files to remove, or list of modification to do in registry?
I'm using Access 2000 along with Oulook 2003. Since we changed email servers, the send report no longer works. The addresses no longer appear to be valid. I can manually put all the names in every time an email is sent, but that is defeating the purpose!
I even tried changing the addresses to what an outsider would use rather than our internal name list; (milko@valspar.com instead of Mary Ilko) but this didn't work either.
Here's the code: Private Sub cmdMailApproval_Click() OnError GoTo Err_cmdMailApprovalClick
I am using the following vba / SQL to create a query which looks between two dates in a table. It seems to work first time but thereafter my query pulls back dates which are not in the criteria (dates are selected from Combo boxes - search_chasestartdate and search_chaseenddate):
If (Search_ChaseStartDate <> "" And Search_ChaseEndDate <> "") And intPosition = 0 Then strParameter = strParameter & "Sales.Chase between #" & Search_ChaseStartDate & "#And#" _ & Search_ChaseEndDate & "# " intPosition = 1 Else If (Search_ChaseStartDate <> "" And Search_ChaseEndDate <> "") And intPosition = 1 Then strParameter = strParameter & "AND Sales.Chase between #" & Search_ChaseStartDate & "#And#" _ & Search_ChaseEndDate & "# " End If End If
If strParameter <> "" Then strSQL = "SELECT Sales.* FROM Sales WHERE " & strParameter & ";" Set qdf = dbs.CreateQueryDef("Business Master Query", strSQL) DoCmd.OpenQuery "Business Master Query", acViewNormal, acReadOnly Else MsgBox "You have not selected any parameters to search on. Please try again.", vbOKOnly End If
Does anyone have any idea why this is happening? I have been stuck for a while on this.
I have written a subquery that works fine alone, but it returns -1 when with query.
The subquery is supposed to return a total of type currency.
Any help/suggestions will be very much appreciated.
SELECT tblSite.Name, tblPhase.Phase_No, tblVariation_Order.Customer_No, Exists (SELECT Sum(tblVariation_Order.VO_Price) FROM tblCustomer INNER JOIN tblVariation_Order ON tblCustomer.Customer_No=tblVariation_Order.Custome r_No GROUP BY tblCustomer.Customer_No;) AS Expr1 FROM (tblCustomer INNER JOIN tblVariation_Order ON tblCustomer.Customer_No = tblVariation_Order.Customer_No) INNER JOIN (tblSite INNER JOIN (tblPhase INNER JOIN tblHouse ON tblPhase.Phase_No = tblHouse.Phase_No) ON tblSite.Site_No = tblPhase.Site_No) ON tblCustomer.Customer_No = tblHouse.Customer_No WHERE (((Exists (SELECT Sum(tblVariation_Order.VO_Price) FROM tblCustomer INNER JOIN tblVariation_Order ON tblCustomer.Customer_No=tblVariation_Order.Custome r_No GROUP BY tblCustomer.Customer_No;))=True));
I've got a number of different append and delete queries running on command on one of my forms, in which it makes a copy of all of the data on that form and included subforms, copies them into another table, and then deletes all of the data from that record. When this runs, I get an error saying "record deleted" and then another error message. Now it is deleting the records and it is moving them, however when i go onto one of the subforms, all the fields in the subform show "Deleted#" until i go back to the previous record or forward to the next, then they clear, but everytime it brings up the other error message it says "end or Debug" which I don't want it doing.
here is the code I put in the OnExit of the InDate
If DLookup("[BeginDate]", "GroupEvent", "[In Date] >= [BeginDate] And [In Date]<= [EndDate]") Then
It works great BUT I need to get the Activity and Number field information from the record. I cannot use another DLookup cause it pulls the Activity information from the first record and not the found record. Any Ideas?
GroupEvent Table : Fields are BeginDate, EndDate, Activity and Number
Hello All, I have MSAccess ade working in some computers which has WindowsXP-pro(SP1 and SP-2) without any problem. But It doesnot work(When i said it doesn't work means it doesn't work in certain parts which i will give an example) in some computers that has exact same configaration. The problem is when I try to instance a class using a TypeName function, it doesnot recognize the class name and just returns an object rather than recognizing the class's name. Its a strange thing because I have some .ade from past works fine in all machines. The only difference is In the new .Ade is I have included the Microsoft outlook 11.0 object library. But the part of the code thats not working doesn't even use the Outlook library at all. So did anyone has this kind of problem, PLease suggest or ask me if you have more details of this problem. I really appreciate your help. Thanks again ds111
I have a qry I need for picking the info for sending a series of letters out. I finally got it to work and now Im wondering if there is a better more efficient way. The qry I call to generate my report calls on information from 10 other queries and 7 tables. Some of the other queries are needed for other sub-forms that rely on the data. Is this something I should change? or just be happy it works??? -Dan :D
