I have a main form where the user chooses a BoxID. There is a subform on this main form that has a relationship between BoxID on the main form and subform. The users are entering data in the subform and when they have entered 10 lines of info I have a message that tells them to start a new box (I could not work out how to do it any other way as I lack VB skills). The user closes the form or clicks add new record to create a new box. If I view the previous record there should only be 10 lines of information in the subform but there are 11 as it takes the blank line as a new record....
I have searched the forum and asked some of my colleagues about this and I do not seem to be getting anywhere. :(
What I need is to be able to use a (blank, ie showing no current records) form to enter data into a new record.
I have Tables A and B in a 1-to-many relationship and I need to be able to bring up a blank form which has:
1. a combo box, allowing me to select the relevant record from the parent (table A), and ... 2. blank fields (from the child - table B) to fill in with new data.
I can set this up using a standard setup, where all records are shown, but this is confusing to a dumb user, who really only wants to see relevant boxes for them to fill in without the distractions of data in fields they are not concerned with or with other records they do not want to know about.
I have a form, combo box selection, when i make a selection, all the info is good on all my tabs, which holds the subform.My issue is, on one of the subform, it's a data entry form, where I want it to be on a new record page. instead it list all records. I want my users to see a blank page, but have one field populated. is this possible?
1) blank data entry page, but with a populated field?When a CU Name is selected,I want the (Enter Note) tab to go to a data entry or last page or new page.I have tried putting it to data entry form, but the CU Number will not populate.
Hi, I have a form which records computer faults reported by users. On this form there is a subform for comment tracking eg. Phoned user, Date/Time. On the next line would be; Informed user to do this, Date/Time and so on. I have a button on my form which I would like to use to automatically put in a line of data. It is an aknowlegde fault button. What it hopefully would do is when you click the button it will automatically put in the date/time in the subform, Then the word "acknowledged" in the comment field, then prompt for the user name ( for the username field). I am not sure on how to start the command. If i were to do it in the same form then I would just put something like; me.Date.Value = Date() me.Comment.value = "Acknowledged" me.Username.value = "[Prompt]"
As you can see I have two problems though; 1. The data has to be entered in a subform 2. My Prompt I dont think will work.
I have a data entry subform that is only supposed to show an empty record ready to be populated, and a display records subform that is supposed to show all the records. The subforms are both on the same tab of a tab control on my main form.
Problem 1: The data entry subform shows all the records rather than a blank record. Something on my main form is causing it to show the records when it should not. Any ideas? The Data Entry is set to Yes.
To try to isolate the problem, I created a new form and added the subform to it where it behaves properly:confused:
I then added Me.DataEntry = True to the form open to see if that would solve my problem but it still sets the data entry to no.
If I have the properties box open when in form view of my main form, I can set the data entry to Yes and it works fine until I move to the next record of the main form when it resets to no. Teraing my hair out here.:mad:
My final attempt was to search the entire project to see if there is a "DataEntry = False" somewhere but there isn't. What is setting this property? Any ideas where I should look?
Problem 2:
After entering data in the first subform (data entry form), I want to re-query the second subform but I just can't get the syntax right. I have wrestled with the "Syntax for subs" document downloaded from http://www.mvps.org/access/forms/frm0031.htm (Microsoft MVP site) but to no avail.
My main form is called fdlgPrjDetails, the data entry is via fsubPrjCommentsUsersDataEntry and the subform I wish to requery is fsubPrjCommentsUsers.
None of the attempts below worked giving a cannot find control error.
Private Sub Form_AfterUpdate() On Error GoTo ErrHandler
I have an Access 2000 form containing several subforms that needs printing on a regular basis, which works fine when the subform contains data, but sometimes the subforms contain null values. We want to print the subforms without the data to maintain consistency, but when printed they have disappeared and a blank space in the form is printed. The subforms view perfectly in print preview... any help would be appreciated, I have spent a good deal of time researching this issue without any leads
I'm looking for a little help on something that I'm sure is an easy problem. I'm building a form for patients (data from Table: Patients) that contains a subform containing lab values (Table: Lab Values). I'm new at using subforms so I'm in a little over my head.
Both Tables contain the patients name to link them together. When I create the subform, I don't want it to display the patient name, because it is already displayed in the header. But if I don't include that field, I can't link the two tables together. I'm using one of Microsoft's templates off their website (called Contact Manager Database) as a guide, and it has exactly what I want - a sub form that only displays the relevant data for each patient, but when you add a record the data in the table automatically includes the name of the person.
I just can't seem to figure out how to do this. I'm sure I've been very unclear describing this, and I'm sure this is an easy task, but if someone can give me a little direction I would greatly appreciate it.
I have used the Lesban Rich Textbox Control. However, I face a problem with the control and cannot solve. The thing is that whenever I select an item from a combo box which loads a no record it refers to, it always ignore my first letter input. The second one will go just fine (e.g. when I enter ABC...., the control will ignore the A letter) Hope you get what i mean. I dunno if I made mistakes somewhere with the control. Does anyone have any idea that such thing should be done?
2nd:
In the same form as above one, I also designed 2 other subforms, however, it always raises error when I enter data while the main form contains nothing. I want to disable those 2 subforms when the main form record isn't filled out. I found a similar result in the forum, but it doesnot work with Rich Textbox Control's update event.
I apologize if I'm missing something terribly simple.
Here's the background: I have a set of 3 tables linked to a main table based on a field called SampleID. I then have one main form (SAMPLE) with the other 3 tables (INDIVIDUAL, LOCATION & ORGANISM) all as subforms within the main form.
everything seems to work well in terms of links and getting the data into the appropriate tables and retaining the SampleID link. However, during data entry using the tab key, I am unable to find an eloquent way to move from the main form to subform1, then from subform1 to subform2, from subform2 back to main etc. I have set the tab order, and used the afterupdate control to change the focus which works, however as soon as I move from subform1 to subform2, the data just entered disappears from subform1. The data makes it to the table without any problem, but just blanks out the form.
From what I can see, when the subform loses focus it automatically saves the edited record and inserts a new record, thereby blanking out the fields that were just entered. Is there a property that can be set so that a new record is not automatically entered when leaving a subform? Is there a method to do this through coding?
[Solved] I have a report that is based a query formed from 2 tables. The query pulls the address from one table for a client from the other table. This address then appears on the report. There are 6 lines for the address: Company Name, Contact Person, Person's Title, Address 1, Address 2, City/State/Zip. I have this working fine, until an address is shown where there is no Title, or Address 2. Then a blank line is shown. Any suggestions on how I can eliminate the blank line if there is no information to show?
How do I display a more meaningful message instead of the cryptic error about having to enter data into blah blah blah. How can I trap that error and provide them a more meaningful message about entering data. I have tried the following;
Main form name frmPatientRecords Sub form name DentalRecords Subform Private Sub Form_BeforeUpdate(Cancel As Integer) If Nz(tblPatientDetails!recordid, 0) = 0 Then MsgBox ("sorry. Please complete the main record entry") Parent.SetFocus End If End Sub
I have a mainform set to data entry to add records to TABLE1. I inserted a subform that shows fields from TABLE2. I have a field in TABLE2, let's say TBL2FLD1(NUMBER). I want to add TBL1FLD2(NUMBER) from TABLE1 in the mainform to TBL2FLD1 and update said field in TABLE2.
My problem is:
(1) I get a #TYPE! error when I try to add the two fields, which I have tried many, many ways (adding them together in the Default Value; creating an unbound field to hold the calculation and then putting that field into the Default Value of TBL2FLD1; ETC), and (2) I don't know how to get the subform to update TABLE2. It seems like the control gets stuck in the subform. Is there a way to accomplish this without coding it?
I have a form that request the User to enter a Parcel ID number (99-9a-99-99aaa-aaa-aaaa). The sub form asks for the subdivision number, block number, and lot number. The subdivision number, block number and lot number are normally part of the Parcel ID number but sometimes they can be different. I want the sub form to fill in the Subdivision number, block number, and lot number as a default but allow the user to change the value if needed. currently the sub form will only show what is entered into the table itself if a change is made on the main form the sub form does not reflect the change.
I have a main report / subreport relation, just want to have a fixed length of each printout. e.g the total number of lines of the subreport should be 8 lines. However, lots of subreports contain records less than 8. I would like to know how to insert of blank line in the subreport depending on the records with content at each print, in order to make the total number of lines in each subreport is 8 each print!!
I have created a form that searches through one of my tables, via a query, it then automatically creates a report from that query.
I want to add an option into the combo box's that is blank.
Currently if you wanted to choose by 'fault category' but accidently click on 'failure analysis', it will take the top value of the combo as the entry, you can't then blank 'failure analysis'.
Each combo box gets its information from an independent table.
The only think I figured out what adding the refresh button which just closes then reopens the form so all the fields go blank.
I have a lot of fields that I want to make required entry only if one of the check boxes I have is blank. If the check box is blank then I don't want any entries to be required.
For example, I have a form that needs to be filled out only if a machine is running, if the machine is not running then only certain fields need to be filled out and the user will select the check box labeled "Machine not running".
BTW, I'm very new to Access and have no experience with implementing code, other than with excel.
I have code that is executed with the click of a button to enter a new response using 2 fields to differentiate the records: a combobox "cboSrvID" and a textbox "RspnsName". I have a different set of questions for each value in the cboSrvID. Upon selecting my button the record is saved correctly although I would like it to open the blank form associated on the subform "sfrmSurveyResponses" when pushed. I have tried some DoCmd.FindRecord and DoCmd. GoTo functions to try and retrieve the last acLast RspnsID inputted. So far I have had no luck.
Below is the code for the onClick action of my button.
Code: Private Sub cmdEnterResults_Click() DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70 DoCmd.SetWarnings False DoCmd.OpenQuery "qappNewResponses" Me![sfrmResponses].Requery End Sub
I have a form that allows users to search the database for records based on there criteria. The form allows the user to search, through combo boxes, by variables. The first is MAT, the second is Relocation Area. The search works fine when the user selects options form the combo boxes. However sometimes it is neccesary to leave the location field blank and only search by MAT. When the location combo box is left blank no records are found. Is there anyway around this. The SQL code for the query is below:
SELECT [Extract Data].[ID], [Extract Data].AREA, [Extract Data].[MAT], [Extract Data].[Relocation Area 1], [Extract Data].[Relocation Area 2], [Extract Data].[Relocation Area 3], [Extract Data].[Grade Score] FROM [Extract Data] WHERE ((([Extract Data].[MAT])>forms![Data Search]!SearchMAT) And (([Extract Data].[Relocation Area 1])=Forms![Data Search]!SearchArea)) Or ((([Extract Data].[MAT])>Forms![Data Search]!SearchMAT) And (([Extract Data].[Relocation Area 2])=Forms![Data Search]!SearchArea)) Or ((([Extract Data].[MAT])>>Forms![Data Search]!SearchMAT) And (([Extract Data].[Relocation Area 3])=Forms![Data Search]!SearchArea));
I have a switchboard which runs a google style search query to find people based on their first name, surname, date of birth or NI number on clicking the search button. It uses the following criteria in the query Like "*" & [Forms]![SearchF]![Firstname] & "*" for each of the above fields.
This works perfectly until someone inputs a record that doesn't have anything in one of the fields. ie, full name and DoB, but no NI number. When a record is entered in this way, the table stores the record but the search query cannot find it.
How can I get the value from a field in one table (in the sub form) to copy/insert into a field in another table (in the main form) when adding a new record?The main form and sub form are linked using parent/child linking, and the sub form is in a tab.I have table A (Visit Dates) in the main form which is used to record the date of a visit to a church. Table B (Quarters and Peals) is used to record an event that took place at that church during that visit. Note that not all visits in table A require a record to be created in table B - but half or more do.
In tables A and B I have a field called "QuarterOrPealID" and these are both primary keys, though the field in table B is set to 'no duplicates' and in table A it's set to 'duplicates allowed', as table A has its own auto number/pk. They are both linked in the relationships.
So, when I add a new record to table A using the main form, I might then need to click on the tab in the sub form to create a new record in table B, which has to be linked to the same record in table A. When the "QuarterOrPealID" auto number/pk is generated in the sub form (table B), I need that value to update to the "QuarterOrPealID" field of the main form (table A), so that when I'm viewing these records the form pulls all the information nicely together.
Hi! This is my first time writing in. I have been struggling with Access for the past 2 months... I am stuck with a problem. I have a variation of the Order form in the Northwind Example, with a subform called OrderDetailsExtended. The primary keys for the OrderDetails Extended subform and its corresponding table are the orderNumber (which is the link with the mail Orders form) and Item. Basically, my question is.. each time i want to add a new record, I want the Item number to automatically increment (but i am not using autonumber for this). The item field is currently disabled.
However, each time i enter a new record, the item number automatically becomes 0. And if I close the form and reopen it, the number changes to 1... Here is the VBA code i used...
Private Sub ProductCode_Enter()
Dim vItem As Variant vItem = Nz(DMax("Item", "orderDetails", "orderNumber = ' " & Me.orderNumber & " ' "))
i have a form with a subform. the first line of the subform is supposed to mirror some of the data filled in the form. as soon as the appropriate data is filled in the main form, i would like the first line of the subform to reflect this sama data. i also want this first line of the subform to be disabled so that users cannot have different data between the main form and this first line.... is this possible? how would i disable just this first line? is there any function to disable it?
i have a form frmCreditNote with a subform sfrmCreditNote. They are linked by a creditNoteNumber. As soon as i pick a customer in the main form, i want the first line of the subform to have that customer name as well. If I change the customer name in the main form, I need the first line of the subform to correspondingly change as well. If the form was new, i would open a recordset and use .AddNew to put in the new first line date If I was updating the form customer name, then I would need a .Edit to change the first line of the subform. My question is : how do I determine if the subform is empty? Is it a command likeIf subform.HasData, orIf IsNull(?)Please let me know thanks
