I am using Access 2007..I have created a main form and have inserted a subform. When I open the main form, the subform displays correctly. However, when I go to create a Report from the main form, the subform information is not displaying.
View RepliesOn this form, there is a text box for Quantity...At the end of the form, there will be a button that when pressed:The current record the data on the form is entered for is saved,A report is printed on a specific printer,I do not want the report to actual display,The number of copies it prints should be equal to what the quantity field indicates.I do have the report already created and the Quantity field is on the report (just not visible).Once this all happens, it should return the user to the form, that is blank, waiting for a new record entry.
View 1 Replies View RelatedHi,
I got a form name "X-Zone Cyber Cafe by ITE College East"
Inside that form, i got a subform called "PCStatus"
In the main form, i got a image called 'pc01'. I wan to do it something like, when i click the image(pc01), the record of 'pc01' from the PCStatus table will be displayed in the subform.
And when i click on image(pc02), the record of 'pc02' will be display in subform
I have attached a image to explain better
Thanks in advance for your help
http://itecollege.com/Help.GIF
I have a form that displays a specific set of data depending what you select in a group of list boxes before. See image below:
13516
You select a PIPELINE, a YEAR and then a HAZARD, and this brings up a series of risk assessments depending on what you've selected. The RISK ASSESSMENT is actually a subform thats been set up to look like a list box. (Side Note: The reason I have done this rather than just use a normal list box for the risk assessment is I wanted to have a combo box attached to each record in the list box. Access does not allow you to do that so I had to fudge it). The RISK ASSESSMENT subform is populated by a query. At the bottom of the form is a normal list box displaying the same information thats in the RISK ASSESSMENT - I have done this as a test to ensure that my fudged subform is doing it's job.
From the fist screen capture you can see that the combination of PIPELINE, YEAR and HAZARD produces 3 risk assessments - this is also confirmed in my test list box. Everything is ok so far.
The problem I have is that I can only get my subform to display the data when the PIPELINE selected in the first screen capture is selected. Any other pipeline selection does not display the data in RISK ASSESSMENT. However, I know the data is there as my test list box displays the data. See image below:
13517
Therefore, my question is, why would data be displayed in the subform for some selections but not others, even though the data is there?
Any help would be greatly appreciated,
Best Regards,
Aaron
Hi,
This is not a very big issue, but a very annoying one. I'm making a weekly display of tasks preformed (One subform for each day). The functionality is almost like a timesheet. You register the hours worked on spesific tasks/projects.
The problem I got now is that the textbox containing the date (In the subform) is not displayed when there is no records in the subform. The date is set by the motherform - Me.Form!frmday1.Form.VarDate = Me.day1
Hi,
This is a Query / Forms question...
I have 2 tables setup with a 1 to many relationship, simialr to 1 Customer having 1 or more orders. I created a query to prompt for all orders for a particular customer. I then created a form based on this query - i.e. linked the query to a form.
Now when I open the form I am prompted for the customer id and when I enter this all of the results of the query are displayed in 1 form. However, this is not what I want. I would like the orders for the customer to be displayed within a subform on the actual form. In this way the customer details will static and I can cycle through the customer orders in the subform separately.
Is there any way I can setup my query to display the results in this way? I need the prompt for the customer ID. Or is there any way I can setup the form to display the results in the above way?
Any help would be greatly appreciated.
Thanks
I have a subform, which contains only one text box, which works normally, until I set the startup options to hide the menu bars, database window etc...
Can anyone think of any reason why this should be!?
I have 3 tables:
tblAnagrafica
TabellaPIP
TabellaJoinPIP
By wizard I have build a form that collect data from a query: "QueryPIP2Tabelle"
The main Form :" frmtblAnagraficatest"
display correct data from tblAnagrafica,
BUT the subform: "frmTabellaPIP Sottomascheratest" does not display data from TabellaPIP.
Relations are many -to-many but, because it's my first building database, can be incorrect.
Database1.accdb
I have a subform that users enter in Dates of the month and how many people attending specific functions. I dont want the users to have enter in all the Dates for each month I just want them to enter in the number of people attended. How can I do that on my subform called TrainingTanfTrainig. the Table is called Training_tbl thats a child table of the SpecialEvents_tbl.
View 1 Replies View RelatedDear All:
How do I go about displaying the current month and year in a report? I reckon this would be in a textbox.
Any help is greatly appreciated.
Regards,
Dion
I have a form with 2 buttons on it, I'll call them button 1 and button 2. When I click on button 1 it calls a class that will go through and calculate some totals and then write them back to a table, all access to the table is managed through ADO. Then I can go over to button 2 and pull up a report displaying the totals. Although when I click on button 2 the report will be about half empty, only displaying 0's in most cases. If I close the report and open it again using button 2 all the data will be populated. What is going on here???
Thank you for any help
Don't Kill me folks... I know this has been asked and answered, but I'm not able to get it to work. I'm using Access 2000.
I have an image in the Report called ImageFrame and the following code:
Code:Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) On Error Resume Next Me.ImageFrame.Picture = Me.PhotoEnd Sub
What am I doing wrong? Is there something else to set? I don't get an error, but it only shows the image I chose to place the image control in the first place...
In the report I am trying to generate I want every possible option for a specific field to show. I have it set up now as accessing its options from a table but can change it to a value list if that will be easier. I have listed a sample of what I want and what I am getting to explain what I mean by this. If anyone can help me go from one type to the other I would appreciate the help!
** I put dashes between the columns since this forum doesn't exactly show things in a column.
What I want
Locality-Count1-Count2-Count3-Count4-Sum
1-0-0-2-0-$23.34
2-3-2-8-1-$845.36
3-0-0-0-0-$0.00
4-4-2-0-0-$40.12
5-0-0-0-0-$0.00
6-0-0-0-0-$0.00
What I get
Locality-Count1-Count2-Count3-Count4-Sum
1-0-0-2-0-$23.34
2-3-2-8-1-$845.36
4-4-2-0-0-$40.12
Hi, I'm just wondering if it's possible to display the result of a query on a subform which does not have a relationship with any other table.
What I'm doing is creating a search form where a query is built from the users input (through combo boxes and text boxes) of what table, attribute and condition they want to search from. When they press the search button, I want the result to be displayed in a datasheet below the selection criteria
The first thing I thought of using to display information with was a subform, but I think the purpose of having the subform is so that it can be linked with a form. So, is there another control or way of displaying results. The results can come from any table.
Thanks.
sugoi_kat
So i have a combo box that has a criteria set for the query. I have a search button that runs the query that users click.
What i need to happened is i want the results displayed in the sub form the when query is ran.
I have a main form which displays data regarding stock takes for a number of locations. The form is bound to a query which is based on a table containing a STOCKTAKE_ID field which is an autonumber field. The STOCKTAKE_ID is present on the main form
I then have a subform which is linked to the mainform via STOCKTAKE_ID.
When I open the form for a particular location the subform displays data, no problem. When I do the same for other locations the form is blank. If I check the table that the subform is based on, there is a record with correct STOCKTAKE_ID but for some reason the form won't display it. There are also no duplicates.
I run a Query based on some data in a "drop-down" box. It works in just datasheet view, but when I print it on a report, it displays the position that the data is in the drop-down box.
How do I display the data, not the position on the report? Here's an example:
My drop down box contains:
apples
oranges
bananas
My query returns apples, but in the report view it displays the number "1" instead of my data "apples". If the query returned oranges, the report would display "2" instead of "oranges" and so on.
Any ideas?
Jen
I have a form in which I want to retrieve images from a folder. Each record contains a txt field where the path of the image is located. Not every record contains a path to the image file as some records does not have images. I have created an image field in my form and used the following code: Me.Image129.Picture = Me.imagetxt to retrieve the image. I would like to display an image containing the words "No Image" whenever the imagetxt field is blank. How would I do this. I cannot go back and fill in the blank imagetxt field with a path as I am pulling the data from an external source. Also, would this be the same method if I am creating an image field for a report? Any help would be greatly appreciated.
View 2 Replies View RelatedI have a report, which opens a dynamic search form (built off of John Big Booty's code from this site). The form opens, and works as expected.During the dynamic search form testing, I created an 'OK' button that opens another form to display the record, but the dynamic search was opened first.
I would like to reprogram the button to display the selected record in the report which opened it.How can I get the selected record to display in the already open report?
Hello. The problem I am having is related to two tables. I have a table called Void and a table called Panel. A panel can have multiple voids and a void is assigned to only panel (one-to-many). In the Panel table, I set an autoincrementing number(SprayPanelId) for the pK. In the Void table, I set an autoincrementing number (VoidId) for the pk. I place the SprayPanelId into the Void table as a foreign key (same name in the void table). The problem I have is in my forms. I created a Panel form with a button to open a subform for data entry on the voids related to the panel in a new window. Data can be entered and is properly saved in the Void table. I open the Void table in a datasheet view under the table section and see it is properly there. I can run queries where Void.SprayPanelId = Panel.SprayPanelId and it returns the correct void with the correct Panel. The problem becomes when I open my void subform, it no longer displays that record associated with that panel. however, the record is there in my void table. Any thoughts? Do I need a filter perhaps, run any sql commands? Thanks in advance, Kevin
View 2 Replies View RelatedI've attached a link below:
Basically, its a database for an entertainments agency, I've got a form for 'Artists' which shows the performers on the agencies books. I've tabbed the form so one screen shows the artist details and I want the second screen to show the bookings that the specific artist has.
I've linked to the 'bookings' table on the subform successfully, but I can't figure out how to filter it so it just shows the bookings that the specific artist showed has.
i.e.: I want it so that The Deltatones booking tab ONLY shows the deltatones bookings.
Here's the dropbox link : [URL] .....
Hi,
I have a field in a form which displays the Sum of 10 values from other textboxes. I want to display the values of that calaculated field in a report and somehow I am stuck. I am running the report based on a query.
How would I get those field calculation values to display in a report?
Thanks
dfuas
Hi. Back again with a badly designed number of tables that I inherited.
Anyway...
I have 20 tables each with an ID field and a dozen-or-so text fields. - (I planned on using a master report with sub-reports, but perhaps I am ahead of myself here.)
I need the user to enter the ID and a value which would only appear in one of the dozen+ fields for that record, in that table.
I set up queries with parameters for the ID and the desired text value.
However, when run, I get the correct client record, but also all of the fields for that record... Not only the field with the desired value.
Is there a 'simple' way to do this knowing ho wmany possible fields froma ll of the tavbles would have to be searched? And not all tables have the same field names!
Russ
Hi all, help with this would be appreciated.
I have a crosstab query which returns values in a range of categories. I have 5 categories. My problem is that sometimes a category may not return a value in 1 or more of the categories. This means that when I am displaying this data in my report I haven't got the data in the correct columns.
In the underlying queries for this I tried using a LEFT JOIN forcing the category, but when I executed the crosstab I got errors in all fields.
Thanks in advance
Ginny
I have a report that generates the position of certain items. When I produce this report it doesn't put the data in order. All associated data with that position is correct, it is just not in numerical order. The attached screenshot shows the issue I am having. In the position column it should read 1,2,3,4 but in some cases the positions are not in order.
View 2 Replies View RelatedI have a report based on a query. There is a field "comments" that is a memo type however on the report it does not display all of the text. I have the property "Can Grow" set to "yes" however it still only shows partial text. Any ideas? thanks in advance!
View 6 Replies View Related