Subform Problem Is Survey Db

Oct 18, 2005

Hi, all--

Searched for posts related to this problems but didn't find anything.

I have a survey db to be used for data entry of returned survey responses. The main form is a tab control consisting of mutltiple subforms. Each survey question has mutiple parts but each response receives a numerical value.

I am using primarily option groups so the data entry looks similar to the hard copy survey. The enterer only has to click on the correct response.

The data source of each subform is a query with a numberical parameter corresponding to the appropriate question. Because of this, each subform (using continuous form views) has a blank "item" after the survey items. I have hid this on the main form and have tried to turn off the tab stops and removed all scrolls.

I can't keep from the blank item sometime appearing. When this happens, there is no way to slide up to first item.

I hope this is not totally confusing!!! If you understood this, do you have any suggestions?

Thanks.

View Replies


ADVERTISEMENT

SURVEY Database - Problem On "survey Questions"

Jul 16, 2007

Hi, I have a survey database file containing the following tables

tblQuestions - contains survey questions
tblResponse - contains responses inputted by user
tblRespondents - contains info on user (e.g. Name, Add...etc)

Is it possible that answer to some questions are dependent on other questions?
for example:
Question 1 -True/false
Question 2 -True/false

Question 3 -True/false

If question1=false or question2=false then question3=false
(the response to question 3 is automatic and dependent on the responses of question1 and question2)

Thanks in advance for those who can give me some suggestions.

View 3 Replies View Related

Survey Db

Sep 20, 2006

I've been asked to make a survey db by someone. I was wondering what is the best way to go about this? The output spread sheet list several questions asked of the user. The user id and questions asked are in columns. So you could have a columns like the user id: date: when was the last time you reaed a book?:Did you like the book?: Was the book helpful? What type of book was it?. These are listed in many rows one for each survey asked. Is my best bet to just make each column a field name in a table and build off of that? Some of the question asked are very length? I can have the spread sheet altered to column names that are more relivant and shorted so when I import into access and populate them into a table it will be easier to follow. Just looking for a little guidance. All thoughts are appreciated. Thanks...

View 2 Replies View Related

Another Question On A Survey Database

Jul 1, 2005

Ok, I need further help with that my survey database. I wonder if somebody could help me figure this out. So, I have this survey database with questions for visitors of a certain park. I have several Yes or No questions. I created queries that will count how many Yeses or Nos I have for each question. But a problem is happening. Sometimes certain questions are left blank, with no answer. My query is showing the blank answers with a count of zero, even if there are more then one blank answers. How can I get the query to count the blanks? Or, can I fill the blank answers with the word "Blank" automatically somehow?

Thanks

View 3 Replies View Related

Survey Database Design...

Nov 21, 2007

I am trying to set up a database that manages responses to a variety of survey questionaires, and I want to know if I am on the right track before I proceed. Sorry if this gets a bit verbose:

Here's the general 'business rules':

1) There are many different historic survey types. Some have also not yet been defined.

2) A specific question may appear on more than one survey type.

3) Each survey type can have a different number of questions.

4) The 'valid' answers to a survey question fall into two general groupings:
- multiple choice (variable number of choices)
- freeform text (and "other__________ " could be a multiple choice response)

5) There will be a lot of repetition in the multiple-choice choices. For example, there will be lots of "TRUE/FALSE" or "YES/NO" questions, lots of 'Rate the following on a scale of 1 to 5' type questions, etc.

6) Some of the multiple choice valid-answer-sets may be more unique, such as '200,400,600,1000,other'.

7) We (sometimes) want to capture such information as 'don't know', or 'answer illegible' or 'not answered' or 'don't care', but these can just be more 'pre-set' choices in the db that do not appear on the paper forms

After some whiteboarding, I arrived at the attached db structure....

View 4 Replies View Related

Survey - Check All That Apply

May 23, 2007

I will have the following tables:

tblSurvey
tblQuestions
tblAnswers
tblResponses
QuestionID -PK
SurveyTakerID - PK
Response

You get the idea - a normalized table.

Anyway for questions that state "check all that apply" I could either store in the Response Field a yes, or a no (or a number code for those answers) OR simply store the yes values for ones that are checked. Seems like the latter, but for querying later, will I run into problems? I have had different views based on reviewing posts.

View 5 Replies View Related

Test / Survey Table Design

Aug 25, 2005

Hey all, I'm trying to design a Test / Survey database.

Please look at the .jpg attached or download the sample database.

I have looked at some previous survey/tests design posted on this forum and had a good table design based off of a Pat Hartman suggestion. Now i am wanting more out of the database and need more advanced options.

Here is what i am trying to do. When a user decides to make a new question for a test/survey they will have to choose what type of question the question will be. For example say the user wants to make a answer grid question. They would choose Answer Grid from the tblquestionstypes combobox. Then they would have the option of choosing a type of answer grid (Dual Scale, Rating Choice, Ranking Choice) from the tblQuestionOptionTypes combo box. Say the user chose Ranking Choice then they would be presented with a list of options for the Ranking Choice. For example 5 sets of rankings, 4 sets of rankings. 3 sets of rankings. (These are just coming off of the top of my head but i think you know what i mean.)

Question, Is this close to being correct. mind you i have just started this and am just throwing ideas around.
Where could i store the correct answer for each question. Sometimes there will be a answer and sometimes there will not be an answer due to the fact that it could be a test or a survey.

Any help or suggestions would be appreciated. Thanks

View 4 Replies View Related

Survey - Multiple Answer Types

May 16, 2007

I am struggling with an answer table for multiple type answers. Some questions have yes/no answers, some have option group answers (agree, neutral, disagree), and some require text input.

I have reviewed posts on normalization on survey design. In it's simplest form I would have 3 tables.

tblQuestions
QuestionID
QuestionText

tblAnswerCodes
AnswerID
AnswerText

tblResponses
PersonID
date
QuestionID
AnswerID

If all answers required an option group value then I would use the structure above.

If all the answers were yes/no I would eliminate tbl AnswerCodes and simply have an answer field with data type yes/no in tblResponses.

But if an answer requires a user text comment, I would need either a memo field or a 255 length text field. This is where I get confused. It seems inefficient to use a memo or text field for all answers when most of the questions require a yes/no answer. I feel the answer is somewhere in setting up another table with answer types, but I am struggling with this.

On a further note I am struggling with the response data entry form. For an option group answer I could setup an append query for each new survey response. But how about for multiple answer (check all that apply). I guess I need a form based on a query linking tblQuestions to tbl AnswerCodes. This would be a subform on the master form for tblResponses. I keep getting all the answers for all questions. But handling multiple question types on one continuous form seems awkward.

Thanks.

View 4 Replies View Related

Using PivotChart To Display Survey Data

Oct 31, 2007

I have this pivot chart (please see attached screenshot) that I was hoping to use to display results of a survey that was conducted by our nonprofit organization. I have it filtering by a few demographics (age, gender, parental status), and then the results of a few other questions below it. My problem is that I'm not sure what results I'm looking at -- whether they're totals of all the responses, just the "true" responses, or...?

The survey asked questions similar to what you see in the field list. Each question is a column header in my table. Then the row headers are each respondent. The choices for answers were "true", "false", or nothing. So in all the cells, i entered t, f, or nothing accordingly.

I'm not sure if I'm not using the pivot chart correctly, or if I didn't design the table for the data correctly.

View 1 Replies View Related

Calculate Percentages Of Survey Responses?

Apr 22, 2008

I'm setting up a database for student evaluations. Students have several options as to how well the instructor did for each survey question. I've been able to set up the data entry form to my liking, and I can use a query to average the total answers to each question, including a count of how many people responded. HOWEVER, I need to calculate the percentage of responses for each option. For example, I need to know the percentage of students who picked "Excellent" for question 1, how many students chose "Very Good", how many chose "Good", etc., so on and so on for every question. How can I do that? I'm completely stuck and a novice user. HELP!!:eek:

View 3 Replies View Related

Table Design For Survey Response Database

Oct 14, 2005

Hi, All--

I am designing a database to capture the data of returned surveys. I want to design the database to facilitate data analysis through crosstabs or other aggregation queries.

If I design a table where each record is the complete survey responses to all survey items in a returned survey, this is not friendly for such query analysis. (In this, each field would be a survey item). Call this the horizontal method.

The other way would be to have a reference table containing the survey items , and have responses entered in a seperate table linked by item id and response id (from a third table containing a record for each submitted survey). Call this the vertical method. This would take more time to set up but would probably be easier to query.

The item response table would become quite long contaiging every item response for every survey turned although each record is short.

Does anyone have any opinion on this, or perhaps a completely different approach that I haven't thought of that would be easy to set up but also easy to query?

Thanks.

Paul

View 2 Replies View Related

Developing A Customer Satisfaction Survey In Access

Oct 8, 2004

Hi -- my first time here...
Has anyone ever had to develop a survey (e.g., customer satisfaction survey) in Access? Does anyone have any advice?

View 1 Replies View Related

Tables :: Capturing Data From Pre-existing Survey

Jun 17, 2013

I've been tasked with creating a database for responses to a survey (that's already been created). There are several aspects most of which i've been able to handle (i.e. the Demographic portion)...The survey has 12 questions with pre-defined answers...What is the best way to set up the "question/answer" side of the survey.

View 1 Replies View Related

Modules & VBA :: Survey Form - Loop To Get Information

Sep 5, 2014

We have a survey form we are trying to get some information from, and I think I need a loop to get the information, but there isn't a ton of information that I have found for what I need to do.

I have a six question survey that has a range of answers and a comments section (I didn't write the survey):

1. Excellent, Okay, Poor, Very Good, Very Poor
2. Agree, Disagree, Neutral, Strongly Agree, Strongly Disagree
3. Agree, Disagree, Neutral, Strongly Agree, Strongly Disagree
4. Agree, Disagree, Neutral, Strongly Agree, Strongly Disagree
5. Agree, Disagree, Neutral, Strongly Agree, Strongly Disagree
6. Agree, Disagree, Neutral, Strongly Agree, Strongly Disagree

I have a simple query that will separate out the overall Positive and Negative reviews. The overall "Positive" or "Negative" ranking is manually assigned via a combo box on a form from a value list. Poor comments in the comments field can equate to a negative survey, even if questions 1-6 are neutral or better (good, very good, etc.)

What we would like to do is to poll through the responses to the survey and see how many of question 1-6 are consistently receiving Neutral or lower marks.

In my head, it makes sense to count through all the surveys and get a number of those responses. The response table (tblResponses) is setup with a combo box from a look up table that has the above responses. Actually, there are two lookup tables for this...one for question one, and one for questions two - six.

View 2 Replies View Related

Table Setup For Survey DB Using Multiple Sets Of Questions

Sep 19, 2005

Good morning,

I am having problems figuring out how to set up my table/query structure for a series of surveys that are based on specific user groups. In a nutshell how do I set up the relationships for the Questions, Employees, and Answers if I have the following tables (simplified):

tblQuestions
--------------------
QuestionID (P)
UserGroupID
Question

tblEmployees
--------------------
EmployeeID (P)
Name
UserGroupID

tblAnswers
--------------------
AnswerID (P)
QuestionID
EmployeeID
Answer

The functionality requirements are:

1. Create a set of questions for two or more user groups (each set contain different questions).
2. Assign Employees to a specific user group.
3. Employees are able to enter the DB to answer the questions within their user group.

What should happen is the employee accesses their set of usergroup questions and enter the corresponding answers. Each time I try to set up the relationships however, the answer field ends up being uneditable.

Any help you can give would save what little hair I have left.

Thanks!

Bob

View 2 Replies View Related

Survey Table Design, Have Searched Require Clarification.

Jan 12, 2007

Firstly hello, I'm new! :)

Sorry for creating yet another thread on table design/relationships for surveys, I did search just needed a bit of clarification.

From what I understand from my search the best way to create a basic db for surveys would be a question table, response options table, and response table, this is similar to a database I have implemented for a simple online surveying system. Now this works with Y/N, or even limited response questions.

However I can't get it to fit with my current project, and I don't think it will, but I thought I'd check to see if I'm being stupid.

I have a survey, 20ish questions expecting 200-250 responses.
The questions consist of a mixture of:

Yes/No answers
Select all that apply answers
Select one from list
Select one from list or select Other and enter it yourself
Text/Comments


Because of the wide range of values, some completely unique and the possible number of answers per question per survey it seems the above method (and that implemented in At Your Survey which i've had a look at) would not work.

I only need to store responses (not questions), so I'm proposing a main table with related tables for those questions that require it.

So in essence a flat file response table with each field being a different question, each record being a separate survey response.
For those questions with multiple answers a separate table, related to the main response response table.

Data entry will be twofold, a web version of the survey automatically recording responses and manual entry into custom form within access for those paper returns.

Reporting will be faily widespread with a lot of cross referencing.

I know this is not a reusable format, and it is pretty much a one time only project anyway, relatively short lived. But I'd still like to create the most efficient product I can, within the time constraints.

Any views or help would be much appreciated :)

View 1 Replies View Related

Tables :: Survey File - Concatenate 2-3 Field Values In Table

Sep 6, 2014

I have a project that in Access. I'll be handling a survey file that will maintain answers per customer. The visit to customer is done monthly in a year, which means that a customer can have 12 visits in a year. My problem is that if I will maintain this project for the next five years or more, I have to maintain another field in my table that will block the duplicate entries.

View 5 Replies View Related

Forms :: Data Collection From Survey - Prepopulated Form Fields

Jun 11, 2013

I have a form that collects data from a survey. The survey has been undertaken before and the equipment being surveyed may carry an ID number and I have the original survey data in a table. If the old survey ID is entered into a field it automatically populates several other fields with the original data....neat!

But that data is not necessarily correct and for this survey I am going to great lengths to ensure the data is as "normalized" as possible so the data is prepopulated into a field with validation. Normally when something is entered into these combo fields I validate with a not in list event and ask if the entry should be added. If I prepopulate with a me.xxxxxx = oldsurveydata the entry is accepted without question. Is there some way to fire the not in list event? I've tried me.repaint, requery etc. but no success.

View 2 Replies View Related

Forms :: Refresh Pivot Chart In Subform After Changing The SQL Of The Subform's Query?

Sep 16, 2014

I have a form, a couple of comboboxes and text boxes on it. When these are filled out, the SQL of a query is changed using these parameters.

There are three subforms on the form, all pivot charts, all based on the query being changed.

The goal would be to update all three according to the user-given parameters.

Right now the subforms only update if I close and open the form, which is probably not the best solution, since it's too slow.

I've also tried to requery and refresh them, with no result.

Then I tried to overwrite the recordsource of the subforms with the same text that was originally there. This got them to refresh their data, but then all of the charts disappeared and had to be built again, so this is a no go too.

View 7 Replies View Related

Forms :: Selecting Record In Parent Subform From Child Continuous Subform

Jan 26, 2014

I have two subforms on a main form. Both use similar queries and nearly the same set of records and PK. The first subform is for data entry and the 2nd subform is a continuous form that lists the entries in order that are made from the 1st Subform. (for entering in vacation days and appointments)

The continuous form cannot be edited, it is to be a list for viewing the information only.

I have an edit button next to each record on the continuous form. When the button is clicked, I want it to take the 1st subform to that specific record as well (same PK), so the information can be edited there.

I cannot figure out how to get the 1st subform to go to the record on the continuous form when the button next to that record is clicked on the continuous form.

I tried the DoCmdSearch for record and just keep getting object is not open errors.

View 2 Replies View Related

Subform Blues - Data Entry Setting Itself To 'No' & Requerying 1 Subform From Another

Dec 5, 2006

2 Subform problems

I have a data entry subform that is only supposed to show an empty record ready to be populated, and a display records subform that is supposed to show all the records. The subforms are both on the same tab of a tab control on my main form.

Problem 1:
The data entry subform shows all the records rather than a blank record. Something on my main form is causing it to show the records when it should not. Any ideas? The Data Entry is set to Yes.

To try to isolate the problem, I created a new form and added the subform to it where it behaves properly:confused:

I then added Me.DataEntry = True to the form open to see if that would solve my problem but it still sets the data entry to no.

If I have the properties box open when in form view of my main form, I can set the data entry to Yes and it works fine until I move to the next record of the main form when it resets to no. Teraing my hair out here.:mad:

My final attempt was to search the entire project to see if there is a "DataEntry = False" somewhere but there isn't. What is setting this property? Any ideas where I should look?


Problem 2:

After entering data in the first subform (data entry form), I want to re-query the second subform but I just can't get the syntax right. I have wrestled with the "Syntax for subs" document downloaded from http://www.mvps.org/access/forms/frm0031.htm (Microsoft MVP site) but to no avail.

My main form is called fdlgPrjDetails, the data entry is via fsubPrjCommentsUsersDataEntry and the subform I wish to requery is fsubPrjCommentsUsers.

None of the attempts below worked giving a cannot find control error.


Private Sub Form_AfterUpdate()
On Error GoTo ErrHandler

Me.Requery

'Me!fsubPrjCommentsUsers.Requery
'Me!fsubPrjCommentsUsers.Form.RecordSource.Requery
'DoCmd.Requery ([fsubPrjCommentsUsers])
'DoCmd.Requery [fsubPrjCommentsUsers]

ExitHere:
Exit Sub

ErrHandler:
MsgBox Err.Number & " - " & Err.Description & Chr(13) _
& Chr(13) & "Error in fsubPrjCommentsUsersDataEntry: Err 003"
Resume ExitHere
End Sub


Any Ideas?

Both problems have me stumped so I'll be grateful to anybody with a scoobie on this.:)

View 10 Replies View Related

Forms :: Calculate Subtotal On Subform And Display On Upper Subform

Jun 20, 2013

im having problems getting a subform to calculate another subform's total and display it as it keeps coming up with the #NAME?.Basically my database is like this

tblCustomer
- tblOrders
- tblItems

and this is displayed on a form. so you can flick through clients, then flick through the orders and its broken down into the items inside each order.i have seen many answers that are only about calculating something on a subform and displaying on a form but this does not work when displaying on a 'parent' subform. the form structure looks like this

frmCustomers
- sFrmCustomerItems
- sFrmCustomerOrders

i have a calculated control textbox in the footer of sFrmCustomerOrders with sums up all the prices using =sum([Price])and in my sFrmCustomerItems, i have a field called Amount (the total amount of all the items) and the Control Source formula i was using was =[Forms]![sFrmCustomerOrders]![sFrmCustomerItems]![txtTotalPrice] but i get a #NAME? error.

View 5 Replies View Related

Unbound Subform Counts Toward Two Subform Depth Limit?

Jul 26, 2006

I didn't know that Access is supposed to only have 2 subform deep. On my form, I have three subform deep. However, the master form is unbound, not linked to subforms, and nothing more than a container for tab pages which contains their own subforms and has no code directly associated with data. There is a code to move subform to new record when tabs changes, but that's all.

Does that mean there is really only two subforms deep from the topmost form on the tab page or the subform depth has been exceeded whether the master form has no role in data transaction?

View 1 Replies View Related

Filtering Field In 2nd Subform Based On Selection In 1st Subform

Sep 1, 2006

I almost have this form done.

I have a form with a combo box, and 2 subforms from it. When you select in the combo box (Group), it brings up the choices (Sections) for that group in a subform. Then there is another subform, that is supposed to bring up a series of questions that are related to the section that has been selected. The question field has a drop down to a list table, that has all the questions. Once the question has been selected, it stores in a Master table. The relationship is there. If you try to select any questions that do not pertain to the section, it gives you an error message.

What I need it to do, is when the section is selected, filter out the questions that pertain to that section, and have those questions be the only ones available in the drop-down list to choose.

I know that I need to have an After Update code once the section has been selected, but not sure how the coding should be.

I hope that someone can help with this!

:confused:

View 1 Replies View Related

Filtering Field In 2nd Subform Based On Selection In 1st Subform

Sep 1, 2006

I have a form that is almost complete

I have a form with a combo box, and 2 subforms from it. When you select in the combo box (Group), it brings up the choices (Sections) for that group in a subform. Then there is another subform, that is supposed to bring up a series of questions that are related to the section that has been selected. The question field has a drop down to a list table, that has all the questions. Once the question has been selected, it stores in a Master table. The relationship is there. If you try to select any questions that do not pertain to the section, it gives you an error message.

What I need it to do, is when the section is selected, filter out the questions that pertain to that section, and have those questions be the only ones available in the drop-down list to choose.

I know that I need to have an After Update code once the section has been selected, but not sure how the coding should be.

I hope that someone can help with this!

View 1 Replies View Related

Forms :: User Select Subform Filters Other Subform

Oct 8, 2013

i have a form with 2 subforms. when the user selects a record in subform one. the date of that record filters subform 2. in the source query of subform 2 i have this under criteria

Code:
[Forms]![frmeventbuild]![frmBUILD]![EVENT_DATE]

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved