I have a report which is a statement. I want to be able to have a field that calculates rent, and minus payments. There are a few rent types, Pro Rated rent, Rent brought forward and rent changed, then there is 1 payment type. I am trying to write the sum a few ways, but have not had success. If rent type i= 1 or 2 or 3 I want it to add, if rent total = 4 I want it to minus.
=Sum(IIf([RentType]=1 Or 2 Or 3,[RentAmount],0))-Sum(IIf([RentType]=4,[RentAmount]))
Hi can anyone help i dont really have a clue about access but im tryin to make some tables but i dont know how to do somethings with them. I have these 2 tables 1 called order with fields stock and order quant and 1 called fills with fileds called stock and lots. They are linked by the filed called stocks. What i need is in another table a field with remaining Shares where it takes fills from order quant. is this possible if so how would i do it.
im doing a report based on a query (which has a few fields, including KTYPE, EXPIRATION_DATE, OVERAGE). im trying to determine the OVERAGE based on the following conditions:
here are the conditions:
if KTYPE="PO", then OVERAGE:=(EXPIRATION_DATE + 6 months) ie.. KTYPE=PO, OVERAGE:=(01/04/2004 + 6 months) = 07/04/2004
if KTYPE="IAA", then OVERAGE:=(EXPIRATION_DATE + 20 months)
if KTYPE="FA", then OVERAGE:=(EXPIRATION_DATE + 12 months)
and so on and so forth.
I'm very new to Access. What formulas do I use and do I put the formula in the query or the report.
I have a cross tab query that has field names 6, 7, 8, 9, 10 representing months and a relevance date field with a date.
I have a form and from that form i need to get the value of the last three months from a relevance date field.
I.e relevance may be 01/10/2005 so i would need 3 labels, (labels are already made, but there source needs to be) 10, 9, 8. But the next row may have a relevance date of 01/08/2005 in which case it would be 8,7,6.
I am setting up a query to display a records of products within certain sizes.
I want the width to be input, eg; "500" and i want all records - plus or minus 50 of this record to be displayed. I know i could use the "BETWEEN" "AND" command but i want the user to only enter 1 size if it is possible.
Having some problems with a calculated field on a form. The field came from my table but I typed in the calculation (=[cost_price]+[sale_price]) and it works fine but it wont save to my table so when I run a repot off it doesnt have any of the calculated values because they arent saved in my table??? Can anyone help?
How do I get a field to calculate this formula? I want a script to find the precise current date and from another field find a number and add it to the current date day to make current date + number = date in the future.
For example Field: Total Nights Hired = 2 Field: Date due back = 23/02/07 + 2 = 25/02/07
I am sorry if I did not explain this well enough. I am totally new to databases but need help in my corsework. I am designing a video rental system.
So here is my problem i am semi access savy but i have having trouble with one thing. At work when we make a schedule there are 5 possibilites for how you want to mark your day. I have created a field using text as my parameters since my possibilities include both letters and numbers. At the end of each week I need to create a calcuation only utilizing the number which is 1 to add up the total shifts in the week.
I have tried some IIF statements with no luck. The 5 possiblities are 1, c,r,a,l. Each of the letters stand for something. When the scheduler runs the query he needs to see the letters or the number for each day. But i can't create a properly working calculated field for adding all of the 1's together only. The letters don't need to be added. Any ideas?
Also I have to run a sum for the total of each day at the bottom so I am running into the same problem there if there is any letters in the boxes. Going to a number field is not an option thanks for the help
Below is the code I have written to calculate the arrival and departure times based on the users input on time in the air (tripETE) and on the ground (tripGT). The arrival (txtArrTimeZulu) and departure (txtDepTimeZulu) times are unbound boxes since there is no need to save the information. My problem is when the next leg's ground or air times are entered, it updates the arrival and departure times for all the records to that value; overwritting the previous legs times. What am i missing here? Do i need to open a recordset when opening the form or when entering "TripETE" and "TripGT"?....
Hi This is probaly really easy, I want to identify just minus figues in a query ie -5.00. I have tried iif([TotalPrice])<0,[TotalPrice]) this shows no result. Can any one advise. Thanks in advance.
It's unknown for me why Access hasn't got MINUS implemented and Unmatched Query Wizard doesn't help me much. So I'm wondered if anyone had to confront the following task:
Table1
Book Agent ---------- b1 a1 b2 a2 b3 a3
Table2
Book Agent ---------- b1 a1 b3 a3
The problem is I have to eliminate duplicates but I need to find unique row, which is Book and Agent. From my example it's row with (b2 a2). I tried using Select * From Table1 Where (Book, Agent) Not In (Select Book, Agent From Table2) didn't work I also tried EXISTS didn't work Unmatched Wizard compares only one field, not two.
Hi, I've searched this forum and can't quite get what I need. I have a subform on a form, in the footer of the subform I total an amount owing field. Then I get the value from the footer control to the main form. I know that the total should be 0 but on the main form I get a -0.0119. How can I get this to show 0. Thanks
OK, I figured out how to make a calculation. My big problem now is to have a global field, which would be "beginning balance" and "ending balance". I have 5 employees that share the budget. The budget starts at $1280.00. One employee may buy somthing one day and then another day while another employee may also buy something. I want to be able to put in the amount the employee spent and have it deduct from the balance. But then when I go to another employee and subtract what they spend I want that to subtract from the balance. I want the balance to be visible at all times no matter what employee I am on. Hope this makes sense. I have an attached file that shows how I did it for one employee. Cannot figure how to be able to do it for each employee and just the balance changes. Also I built a subform to be able to show different dates. But the problem again is having it subtract from one global balance. Thank you.
I have the calculation =DateDiff("yyyy",[DOB],Now()) in the Data/Control source properties of a numeric field in a database/form which correctly calculates age in years from a date field DOB. How do I get this field to save to the database? Georgina
My Sales! table has fields [ItemType] and [Price] and VAT! table has [ItemType] and [VATRate].
Both tables has a common field which is [ItemType].
I am trying to make a query which will calculate the VAT figure by multiplying the Sales table [Price] with the corresponding [VATRate] in the VAT table by matching the [ItemType] in both tables.
I tried DLookup but couldn’t find a solution. How do I accomplish this?
I have 4 tables, 2 entities, 1 relationship and 1 lookup
Entities are tblOrg and tblForm Relationship is tblVentureParticipation Lookup is tblInfo (Has many different lookups)
When an organization (these are listed in tblOrg) turns in a form, a new record is inserted into tblForm with the ID of that organization and the ID of the form
I want to identify the forms that have NOT been turned in.
So I figured
Step 1: Identify all organizations who are participating (WHERE tblOrg.OrgID = tblVentureParticipation.OrgID)
Step 2: Join all of the previously selected organizations with all of the forms (FROM tblOrg, tblInfo WHERE tblInfo.LookupID LIKE 'F##')
Step 3: Remove all of the entries in tblForm that match the result of Step 2.
I have verified that both of these individual queries return the right information ...
SELECT [qry_1].Month, B_Division_Group.Grouping_Name, Sum([qry_1].Month_Client_Count_from_B) AS Monthly_Count, Sum([qry_1].Month_Assets_from_B) AS Monthly_Total, Sum([qry_1].YTD_Client_Count_from_B) AS Yearly_Count, Sum([qry_1].YTD_Assets_from_B) AS Yearly_Total FROM ([qry_1] INNER JOIN tbl_branch ON [qry_1].BranchCode = tbl_branch.BranchID) INNER JOIN B_Division_Group ON tbl_branch.BranchName = BDivision_Group.N_Br GROUP BY [qry_1].Month, B_Division_Group.Grouping_Name;
While all monthly and yearly values were positive, the query produced exactly the results expected (i.e. one row of data for each Grouping Name/Month combination, containing the overall totals for each field).
Now, however, some Grouping Names have minus values and the query is showing an extra row (one for positive values, one for negative). It's as if having one or more minus values is being treated as a new Grouping Name/Month combination.
Is Sum() the correct method to use, when dealing with negative values, or should I be using some other function?
I am creating a report and I need data about parts that have not been used in the past 12 months. I'm not sure how to get just numbers from the past 12 months. How do I get the current date minus 1 year?
I have a datasheet subform that is acting like a timesheet. I have a TimeIn field and TimeOut field (both fields formatted as Medium Time); and a field for Hours to total the time. I used the expression =HoursAndMinutes([TimeOut]-[TimeIn]) that I found in another post, and it didn't work. All I got was #Name. Any thoughts as to why that's happening? I would preferably like the hours to total in tenths of hours, ie. 10.5.
So I am trying to setup a default value in the tbl design. The Following two fields are the two in question(StartDate & ReportDate). It already has relevant dates properly formatted in the StartDate Field. The ReportDate will always be the day before or minus 1 day from the Startdate. My question is that I can't seem to get the syntax right to make it work.
I have a form which calculates many fields in the form. However, the issue that I have is how to use a different field in the query than the field that is shown in the drop down combo box in the calculation of an expression.
