i have three fields.
StartTime, EndTIme and TotalTime,
i need to sum the StartTime to EndTime so that i will know how many hours it spent.
and also the total min.
pls could anyone help me...
thanks
so i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
View 5 Replies View RelatedI have finger print machine and i already connect to it and get all log.then i tray to get data and here is the code that im using
SELECT Format(CHECKINOUT.CHECKTIME,"dd/mm/yyyy") AS CDate, IIf([CHECKINOUT.CHECKTYPE]=I,Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm")) AS StartTime, Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm") AS EndTime, USERINFO.USERID, USERINFO.Name, CHECKINOUT.CHECKTYPE
FROM CHECKINOUT INNER JOIN USERINFO ON CHECKINOUT.USERID=USERINFO.USERID
WHERE (((Format([CHECKINOUT].[CHECKTIME],"dd/mm/yyyy"))='10/04/2014'));
how i get end time due to CHECKTYPE]=O
Hi,
I have a database that tracks jobs as they are being completed.
I have 2 tables, the first of which contains details of the jobs and the second contains details of the individual tasks that make up each job (Job and Task respectively)
Within the Job table, there are several fields, however the fields I am concerned with are JobKey, JobID, Start_Time and End_Time.
Currently, as each task within a job is completed, a new entry is added to the Job table with an updated End_Time. At the end of a job, there will be several entries in the Job table similar to
JobKey JobID Start_Time End_Time
1 1 10:00:02 11:00:07
2 1 10:00:02 11:01:14
3 2 10:02:12 11:24:45
4 1 10:00:02 11:02:34
5 1 10:00:02 11:05:25
etc
When I query the Job table, I end up with multiple references to the same job, where all I really want is a single reference to a job with the JobID, Start_Time and the End_Time the last entry relating to a particular job.
How would I write a query to give me a single reference to a JobID Start_Time and the final entry for End_Time?
eg From the above, my query should return
JobID Start_Time End_Time
1 10:00:02 11:05:25
2 10:02:12 11:24:45
Thanks for any help with this
W1dge
I'm trying to calculate the difference between start and end time, which works fine with:
Total Time: DateDiff("n",[tblTaskTimes]![StartTime],[tblTaskTimes]![EndTime])
However, this is for a database that calculates billable time in 10th of an hour. So, for example, 1 hours would be 1, 30 minutes would be .5, less than 6 minutes would be .1.
The format for this expression is set up to a general number, if that matters.
It's gotta be something in the formula like multiplying this by 24 (for 24 hours) and then dividing by something. Nothing I'm trying is working.
I have an input form for production. I need to be able to have a unbound box look at the start time and end time. I need it to determine if the times fall during a break or lunch. My fields in my table are - ID, Start Time, End Time. Example of what I need the control source formula to do is this. If I start at 6:00 AM and work till 10:00.AM and my break is Start Time 9:00 AM... End Time 9:10 AM. I need it to then show 10 in the box as result of the break. I have this so far as in my formula builder.
IIF([Start Time]<9:00 AM AND [End Time]<9:10 AM, 10, 0)
When I press enter it says I have an syntax error and I have checked to make sure the fields are correct. Also how would I go about adding on to this formula to add a lunch break on to it.
I have a query that displays the start and finish time for an activity, I am trying to display the reults of the time between each activity....
For example
Name start End
aaa 14:07 14:09
aaa 14:11 14:12
The end time for the first activity was 14:09 and the next job was started at 14:11, so I want it to display 00:02: - (elapsed time)
Its very easy to do in excel as it would be =SUM(B2-C1) but haven't a clue how to do it in access.... is there any way?
I have a subform in which I want to calculate the difference between a start time and finish time, the problem I am having is when the start time is on a different date to the finish time
Start 23:15 on 14th Jan finish 00:015 on 15th Jan, also I want the answer to be the number of minutes. The fields I have are
BatchStartTime Short Time
BatchFinishTime Short Time
BoilTime ([BatchStartTime] - [BatchFinishTime]) General Number.
There are many batches to enter per job and the MainForm has the StartDate as I didn't want to enter the StartDate for each batch.
I created a call logging/work tracking type Database using SharePoint 2007 lists for the backend and Access 2013 front end for about 60 users and it has been running smoothly for around two years .
We use a shared outlook calendar and I want to be able to pull meetings & appointment information into the database from the calendar so I can assign the meetings out to specific people and keep of a record that they where given the request to attend. I was able to use the import outlook folder to create a linked table and it has lots of great information from the calendar apart from the two most important things you need in a calendar Start_time & End_Time . Is there something I'm missing in regards to these two fields? I assume I'm doing something wrong but I can't figure out what, nor did I have much luck with the Search function on here or google.
This is the list of field names it does import(everything apart from the meeting time and is it a recurring appointment)
Importance
Icon
Priority
Subject
From
Message To Me
Message CC to Me
Sender Name
CC
To
Received
Message Size
Contents
Created
Modified
Subject Prefix
Has Attachments
Normalized Subject
Object Type
Content Unread
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
I am trying to write a more complex macro that will start another macro at a preset time, however I am getting stopped at the first hurdle - getting a macro to run another macro.
Here is the code i am using at the moment, all I want to do currently is click the first button, then get the second macro to execute. But no luck, getting error 2157 "cannot find the procedure"
Code:
Private Sub Command3_Click()
MsgBox "1st macro running", vbExclamation, "Note"
Application.Run "teststart1"
' Application.OnTime TimeValue("19:55:00"), "teststart1"
[code]....
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
View 3 Replies View Relatedhow to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)
View 1 Replies View RelatedI have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
Formatting issue regarding elapsed time calculated using DateDiff().
I understand that you can specify the output value for DateDiff(). In my case I have chosen "n" for minutes. Each result in my query shows the correct calculation in terms of minutes.
[PunchIn] = 11/23/2013 8:11:28 AM
[PunchOut] = 11/23/2013 5:43:30 PM
[ShiftLength] =DateDiff("n", [PunchIn],[PunchOut]) = 572 minutes.
Now when I try to format the result in terms of H:MM (be it in a form or a report) I get varied results. I'll illustrate an example below:
=Format(([ShiftLength]/60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 10.32 Not correct
=Format(([ShiftLength]60),"0") & "." & Format(([ShiftLength] Mod 60),"00") Returns 9.32 This is correct but I need my result to be in the form of a decimal such as my next example
=([ShiftLength]/60) Returns 9.53333333. Getting there but how do I have this result only show two decimal points 9.53?
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
View 4 Replies View RelatedI have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday
EXIT FUNCTION
ELSE
IF [PunchOut] ISNOT Between Midnight and 0559 hours
EXIT FUNCTION
ELSE
DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
I have a database consisting of two tables. One is "articles" and the other is "tasks". To put it simply, I would like to find how much time the article spends in tasks, but one article can have many tasks, and they often (but not always) overlap. Tasks have a start and end date field.
View 8 Replies View RelatedHi,
Wonder if someone can help please. I'm quite new to Access so please bear with me.
I have a data field in my database consisting of both a date and time.
I then have a form containing two fields where the user can type a 'To' and 'From' date to extract the records that they are interested in. The query behind this uses the 'Between[Enter The Date] And [Enter The Date]' coding.
The problem is that because the field contains a time it doesn't return any records when I run the query.
Can anyone offer a bit of guidance on how I could ignore the time part of the field perhaps by adapting the above.
Many thanks
Chris
Hi all, I havent' been around in a while (toddler, work, getting my BS degree and new baby coming in a week and a half) so I am hopefully not asking a previously posted question.
I'm suspecting my new work isn't accurately paying for the hours worked. I made a quick simple DB where I input my punch times in short time format. There's the typical In, Out for Lunch, In from Lunch, and Out. I've got it correctly adding the times so that it reports the total hours worked per day, though, in order for it to display correctly, that total is in short time as well.
The problem is, when I group a week together, as soon as the sum of the totals reaches 24 or more, it goes back to 0, as it's on the idea that there's only 24 hours in a day.
Hopefully, it's just a formatting issue or is there a function to convert the times (or just the sum) to number of hours?
Thanks and Happy New Year to all.
-Jim
I am trying to create an Access database where I can let the employees enter their time-in and time-out, at the end of their shift. I already created this function working, but running into another issue. Everyday, employees need to enter a break. Sometimes they take a break and sometimes they don't, if they work shorter hours. Thus, the break is not a default 30min and has to be enterd by the employee.
Below is the code I have to calculate the total hour:
txtCalcTime has the below code in control source:
=Int([CalcTime]/60) & ":" & Int([CalcTime] Mod 60)
Control source for this form "FrmTimes" property, in which Txtcalctime resides:
QryTimes
"QryTimes" query has the code below:
SELECT TimeID, TimeIn, TimeOut, Brake, DateID, DateDiff("n",[TimeIn],[TimeOut]) AS CalcTime
FROM EmpTimes;
This shows the total number of hours worked. But how can I make it to substract the break time entered by the employee in "txtbreak" on FrmTimes
I need a Select Query to display data on a form. When an order is appended to my table the field named Printed is updated with the time it was appended. When my form opens it needs to display the field Printed and a field I call MinutesFromPrint. This field needs to display the total minutes elapsed from the time in the Printed field to the current time. My expression is not working.
MinutesFromPrint: DateDiff("n",[Printed],Now())
Here are a couple of samples of my results when I run the query at 7:49 A.M.:
Printed MinutesFromPrint
2:35 60366554
5:07 60366402
I have a column/field named [DateTaken] which contains test dates and times in the same cell. I am needing to find those with a test time less than 2:30 pm or <14:30pm.
data looks like this:
8/22/13 4:23 PM
1/29/14 12:21 PM
1/28/14 3:27 PM
8/26/13 4:27 PM
[code]....
this is what I have come up with to extract the time component of data set so that I can then later, sort it by the time in a query.
JustTime: TimeValue([YourField])
JustTime: ("hh:mm",([DateTaken])) and or ("hh:mm",[DateTaken])
I get either invalid operator or invalid syntax errors trying both of these.
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only.
([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null)
How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
I have a link table with a field in GMT time. I want to convert the times to local time in a query. I know that I should use DateAdd, but I am just wondering how to know summer and winter time. On the summer our local time is +2 GMT and on winter +1.
View 14 Replies View Related