I have two Numeric fields in my Table, MCRefill and MCTot.
Actually MCtot is the sum of all MCRefill for a given Cust_ID
I have the following expression in the Default value of MCtot in my form showing both the fields
DSum("[MCRef]","Miracle_Cloth_Main","[Cust_ID]='" & [Cust_ID] & "'")
Somehow it doesn't up in the record when you load the Last record for a Cust_ID
Can someone please help ?
I have a sales form. The sales form has many Call, Meetings and Emails linked to each sales record. I want to total all the number of calls, meeting and email records related to the sales record to give a total- Touches.I've created 3 queries;
1 - Counts Calls
2 - Counts Emails
3 - Counts Meetings
These all work fine however when I combine them to attempt to count the results it doesn't produce the correct results.I have a second query as well (no pun intended).
I am trying to sum together a column that has values in Time. The results displays as a decimal. How can I have the result display as a Time i.e. 1:20 (1 hour 20 minutes).
I have 2 field in a table - CourseMarks and ExamMarks. I am making a query to sum these two values. My code entered through the expression builder is Total: [CourseMarks]+[ExamMarks].
When the query is run there are no results if both fields have a score, but If there is a score in the CourseMarks field and none in the ExamMarks field the CourseMark is returned.All the field value data types are interger.
Hi,
I want to sum a calculated field on one of my forms. The field is calculated by multiplying the cost of a good by its quantity. So far I have been unable to sum it. Does anyone know how I can do this?
Here is a link to what the field is related to just so you people know what I am talking about: Project (http://www.access-programmers.co.uk/forums/showthread.php?t=78815&page=1) ...basically I have fixed all the problems mention in that thread. All that remains is this field. I will attach my project in case that helps. (the calculated field is in the Treatment Form) Thanks in advance :)
I am trying to create a sum of a field called ec2mo where mopp is between 0 and 2 and then another sum when mopp is between 2 and 4, etc... I've tried a number of different things, but it doesn't seem to work - instead i get a single value for each field (i'm assuming because there are different values for mopp and many other fields)... I've attached the db with just that table.
Thanks very much for your help!
P.S. I'm not really at all good with using SQL so anything that can be done in a regular query would be most helpful!
I have a table called Products which has a field called "Product ID" and a few others. I have another table called "Sales", which has a field called "Sales Date".
There will be different dates where the products are sold. Here's my problem: I'm trying to make a query to find out which products make the most sales. However, doing so will also display the products separately by their sales dates. So for example, it'll show...
Product #10 / Jan 1, 2013 / 100 Sales
Product #10 / Jan 14, 2013 / 21 Sales
Product #10 / Feb 11, 2013 / 44 Sales
Product #11 / Jan 5, 2013 / 201 Sales
Product #11 / Mar 13, 2013 / 444 Sales
I'd like the products to be together so product #10 would give 165 sales for example. In the Query, Product ID from both tables are connected.
I have a report that has four fields: Item, Qty, Price and TotalPrice for each line in the detail section. Total Price is calculated by multiplying Qty x Price. The text box name that holds the Total Price for each line is txt_TotalPrice. I want to have a Grand Total in the report footer. I placed a text box in the footer with the following expression: =sum([txt_TotalPrice]). When I run the report Access prompts me for the parameter value of txt_TotalPrice. I've been trying to solve this for quite a while now - but I'm totally baffled.
View 3 Replies View RelatedHere is a link that explains a little bit about it: [URL] .....
However, I'm having a problem with summing an entire field. Access does not have a DProduct() function, so it makes the math of "taking the Nth root of a product of 'X' numbers" kind of impossible without writing a custom function.
Hello. I am looking for a way to make a field value automatically default to
the value of the immediate prior field. For example, I am in record 11, and
in Field "City" I type "New York." When I create record 12, I want
City to automatically default to "New York." Is there a way to do this?
Thanks
guys.. i'm using ACCESS 2000.
i wish to add a field
1. fieldname : mytext
2. fieldtype : text
3. default value : none
i have try
ALTER TABLE <TABLE> ADD COLUMN mytext text
but failed to set the DEFAULT value
I would like to create a Default Value for a field in my DB that uses the another field data as the default entry.
View 5 Replies View RelatedHow do I make sure that for every record entered, a certain field automatically has a number 1 in it? I thought that it might be that you set the Default Value to 1 by typing "1" in the bit where it says "Default Value" at the bottom of the page. But this doesn't seem to work. :o
View 4 Replies View RelatedWe have a database form that we use to create "SDN" forms for our engineering department. We want it to autogenerate a number for us for each form. We want this field to be 5600 + the record number. How do I do this?
Thanks for the help.
We have a database form that we use to create "SDN" forms for our engineering department. We want it to autogenerate a number for us for each form. We want this field to be 5600 + the record number. How do I do this?
Thanks for the help.
Hi Guys.
I have a look-up field in a table that looks-up a range of values from another table. How do I set a default value for the field? I have tried entering in numbers as default values (IE the ID numbers for the records that are being looked up) but that doesnt work.
I have a form that is designed from one table. In this form I want one field to have the default value of a different field only if the one field has a value entered.
I've tried in the default value tab to enter =IIF([different field] is null,"",[different field]) nothing happens when I enter a value into the "different field".
Can I make the default value of a field be something in another field in another table. I tried to enter into the default value the following but, it does not find the field.
[tablename].[fieldname] I also tried it [fieldname].[tablename].
I have a List box set to YES and default value set to YES.I would like to hide this field and when I click SAVE in my form, I would like to save it to my table.I did set the control source to the field that I want but somehow it is not working unless if I click on to YES then save.How do I set it in such a way which will save even without me clicking on to the LIST BOX?I want the default value to be saved when I click SAVE command button.
View 3 Replies View RelatedI have created a multivalue field based off of URL... I am getting my values from a different table from within the database. My issue is that I tried to create a default value for the lookup field but it made another selection within the lookup field.
Example:
Reference Table Values are:
Name 1
Name 2
Field referencing table with my defined default value:
Name 1
Name 2
Name 1
High all.
I would like to know how to set a fields default value on a table.
Eg - i have a Yes/No field that and i want the default value to be set to 'Yes'.
I cant use the front end application because the form its on is a generic form used by about 30 other tables.
At present it is not set to anything and so always defaults to 'No' on the form.
Thanks in advance.
Hi,
I have a user who would like the value from the last entry into the form's title field text box to show as the default value when he clicks on enter new issue button to bring up a new record. I do not know if this is possible but I thought I would check for him.
How can I set the default value equal to the value in the previous record?
View 1 Replies View RelatedI have 100 records in a table with a field that does not have a default value specified. If I specify a default value is there an easy way to have all the records updated with the new value without writing an update query?
View 2 Replies View RelatedI have a membership database. A number of members go by their middle names or a nickname rather than their first name. I need to keep track of their real full names, but I want the new-record default of the preferred name field to equal the contents of the first name field. How do I set this in the table design? The table already has 1400 records, and it would be quite a job to manually copy each first name to the preferred name field, a job I would rather avoid.
View 5 Replies View RelatedHi there
I've tried to change the default of a yes/No field so that it's either NUll or "" or Yes. This has proved unsuccessful and all the fields are still showing as No for default unless I obviously select Yes
Does anyone know if there is a way to change the Default of this field to either Yes or so that there is Null?
thanks for any help!
Hello,
MS Access 2000 sp3
When adding a new record to an order file, I have a default value on the ordnum field. It also has a format = "9999-999". The default value is "0603-".
When the user clicks on the new rec nav button, the form has the correct default in the ordnum field "0603-". However, when the user trys to key in the remaining 3 digit sequence number (.i.e. result 0603-123), the default value disappears as soon as the use startes to type the first character. The table source is a query that links the order table to the customer table via cust num. When i use only the order table as the form source, this works ok, no issues but i see this issue when i am using a query joining two tables.
Does anyone have any ideas why or how I can correct this?
Thanks!!
zip file attached with test database