[AR&R Hours]+[PTO # of Hours]+[Meeting/Calls # of Hours]+[System Issues # of Hours]+[BAU Training # of Hours]+[Exception Processing Hours]+[AIG Related Activities]+[Admin Work Hours]+[Migration Hours]+[Project Hours]
Need the fastest and easiest way to auto calculate the above in a field on a form. i can get it to calculate in a query but need it to do in the form as well.
Hi all, sorry to bother you all, especially if this has already been answered, but I can't seem to find the solution to it. Assuming that what I've been doing has been correct that is.
I have three (3) tables with the following fields (where PK is primary key);
[tbl Ingred]: IngredID (PK), ProdID_fk, CompCode, IngredName, Weight, Symbol, RP01, RP02, RP03, RP04, RP05, RP06, RP07, RP08, RP09, RP10
[tbl Prod]: ProdID (PK), ProdName, FP, BP, SBU, ProdNotes
[tbl RPCalc]: RPs, RPs_long (PK), Sym, Limit, Sym_1, RP_1, Comp_1, Add, RP_01, RPNotes
[tbl Prod] has a one-to-many relationship with [tbl Ingred]; that is, for one ProdID, there can be many IngredIDs. The tables are designed so that the final user-displayed form is 'user-friendly'.
I've made a qry called [qry Qcalc] used to calculate the the Quotation (Q) of each of the 10 RPs (RP01 - RP10). Which simply for the first one is; QRP01: [Weight]/[tbl RPCalc_1].Limit, where the [tbl Ingred].[RP01] is linked to a corresponding [tbl RPCalc], by the [RPs] field. As for one [RPs] there may be multiple [RPs_long]. The way it is set up is so that the [RPs] and [RPs_long] are mapped correctly, to be used for calculations.
However, I am now stuck with a problem. I need to sum up these QRP values ([QRP01] - [QRP10]), based on (at least?) two conditions. The user can enter in their RPs; e.g. R10, R20, R21 in any of the [RP01] to [RP10]'s, and in any order.
What I need is to be able to obtain a sum of the Q values for each [RPs_long] (e.g. R10, R20, R21), rather than being the sum of the fields [RP01] to [RP10]. Also, each [RPs_long] may or may not be able to be summed up, depending on another field [Add] which has a "Yes" or "No". "Yes" is for it being able to be summed up, and "No" for it not being additive.
So the end result would be; for each [ProdID], there will be multiple [IngredID] where each will have up to ten (10) "RPs" (that being the [RP01] to [RP10] fields). These inputted "RPs" are then related to [tbl RPCalc] to be able to obtain the Q-values. If the Q-Value is not greater or equal to 1 (>= 1), then the sum of the Q-values for each [RPs_long], provided that the [Add] field is "Yes", will then be able to determine what are the final output RPs to be used, i.e. for the sum of the Q-values are greater or equal to 1 (>= 1), that [RPs_long] will be used.
I've been stuck on this for quite some time, and I know that if I change the whole table structure (like having a field for each RPs in the [tbl Ingred]), I might be able to make it much easier for myself. However, by doing so, it will not be able to offer as much flexibility in the calculations, and also, may not make it as 'user-friendly'. Another thought was maybe to create another table with just the [CompCodeID] (based on [tbl Ingred].[CompCode]), [Weight], [RP], but I'm not too sure how this will work either, but I might give it a shot if this current method doesn't work.
I hope that this made sense, as it is all quite complex (and confusing) to me. Any help on this matter will be much appreciated. Thanks in advance.
I have a sales form. The sales form has many Call, Meetings and Emails linked to each sales record. I want to total all the number of calls, meeting and email records related to the sales record to give a total- Touches.I've created 3 queries;
1 - Counts Calls
2 - Counts Emails
3 - Counts Meetings
These all work fine however when I combine them to attempt to count the results it doesn't produce the correct results.I have a second query as well (no pun intended).
I am trying to sum together a column that has values in Time. The results displays as a decimal. How can I have the result display as a Time i.e. 1:20 (1 hour 20 minutes).
I have run into this problem with several databases I have created. I have my tables all set to store my information. I create the form to enter the information. I try to create the field to calculate a total and every time I enter the amount in the form, I get '?name' or '#name'.
With this particular database, I am looking to track expenses. Expense categories on the left, dates across the top, amounts in the middle, totals across the bottom for dates and down the right for categories.
If there was a way to attach a document, I would send the expense report. If you want to look at it, let me know and I will send it. It's a small xls file.
Thanks.
DT
Hello everyone,
I was working on a database several months ago and I came across this forum while troubleshooting. I had to abandon the incomplete project for some time now, but I am back and ready to get this thing up and running!
My database used to be comprised of lookup tables and other things for each of the fields in my main table, but I have recently scratched that idea for simply using list boxes.
My main problem, I believe, is with my form. I am trying to have two combo boxes, a beginning date and end date, and a keyword text box, all used as criteria in a query.
Seems pretty simple, and I actually got the keyword text box to work, but the combo boxes and between dates critiria return all records.
Can someone double-check my work? I'm sure it's just a simple error, but I will attach a stripped-down database for anyone to look through.
Thanks ahead of time for anyones help, it is greatly appreciated!
Please bare with me as I am an Absolute Access VB code novice . I have a Form in my Access DB and I found the Following code on this site and placed it behind my search button :
Private Sub SearchButton_Click()
DoCmd.OpenReport "All users", acViewPreview, , "[AUP].[First Name] = '" & Me.[Text34] & "'"
End Sub
The Search works great but only searches on the 1 Field "First Name" . How would I expand the VB code to include another 2 fields within my table . ( the other 2 fields I want to serach appear on the Form ) .
Hey there, Im currently making a form so users can enter project information. For this particular project, the user must choose from a variety of options, and each option has a number value assigned to it for a rating. Now at the end of this form, I want a sum of the ratings, and then entered into the table. I am using a text box for the sum of ratings, and can get the sum of ratings to work on the form, but this data is entered as a 0 in the table. If anyone could help me find a way to put the actual sum in the table, that would be excellent.. thx a lot.
If it would be any help, here are the names of text boxes that I'm adding:
Health and Safety Rating, Maintenance Rating, Equipment Rating, School Size Rating, Student Enrollment Rating, SD Priority Rating, Project Requested Previously Rating
Those ratings must be added into "Total Rating"
Thankyou!
Would someone be kind enough to look at the following two attached mini databases. I have this recurring problem when I set things up that I cannot get some figures to appear in the table - only on the form.
In Example 1 I am trying to get the Total Score to show up.
In Example 2 I am trying to get the corresponding score to the description to show up.
I think it is something to do with me referencing the field not the look-up table but I really don't know any more.
Thanks
I am using Access 2007 and have reviewed many blogs and looked at the Northwind db to try to solve this problem. I would like to create a form that functions in the same manner as the "Order Details" form in the Northwind db. Specifically, I want to create a form that will allow me to input a value and have the form get data from another table and populate the table I need populated.
I would like to populate a table "Outside", field names are Key, Name, term, Value, Date.
The table that contains the data is named "CV" and the filed names are Key, Name.
In the form, I would like to enter a value for Key into a combo box, and have it put the value for Key and for Name into the form, and allow me to enter whatever I want to in the Term, Value and Date field. When I tab out, I would like all this data to be in the table "Outside.
Hello, I am a newbie access user, so this might be a stupid question, but here it is:
I have a lot of yes/no fields labeled "10/1", "10/3", "10/5", ... (dates)
They are to record attendance on particular days.
I want to make a query that gives me the sum of a student's attendance and I have no idea to go about that. Any help is much appreciated.
Thanks!!
Hi,
Not sure if this is possible (sounds simple hopefully) but I was wondering if there was a way to sum certain fields in a record on a continuous form.
E.g. Field1 and Field2 in record 1.
Is it something simple like summing columns, i.e. Sum(Field1)?
Any help would be much appreciated.
Hi,
I am trying to figure out the best way to design a table. The table is going to contain data concerning checks that have been given to a church. Each check could be broken down into 3 different categories; Tithes, Offering, Other. In other words one check for $100 dollars might be Tithes $40.00, Offering $30.00, Other $30.00. I need to be able to enter these three amounts into the record and then have them totaled in another field.
Is it best to do this all in one record or should I have two tables? If I have two tables how do I get one form to enter the break down into one table and the total in another table. Fyi, if I do this in one record I don't want them to have to enter in the total. I want the total that is entered to be calculated by the three previous fields.
Thanks for any help you can be on this.
Is there a way to use a query to sum totals of several fields per record? In the db I have designed, I have 5 seperate fields for estimates from different departments. There is also a field for Total estimates. What I would like to do is have the Total Estimates field autocalculate the total sum of the other 5 estimate fields. Is this possible to do through a query? If so how? If not - is it possible at all?
Thanks!
I have 2 fields, Accounts, Accounts CMO. I need those two fields to show in the same table in a new field called Total Accounts. I am summing them, but getting irregular results, some are right, and some are 4 times more than they should be? How would you go about doing this, maybe I am missing something.
View 1 Replies View RelatedHi! I'm trying to create a query using option groups, i have two options the first one is STOCK and the other is PD.
If i select stock the the query i want to create to introduce it on a form is:
I have 5 fields
-denominación
-reserva
-almacen
-cantidad
-stmax
If i select stock
then the query is
If (reserva +almacen)<cantidad then on a sub form have to appear the table with all the rows where (reserva +almacen)<cantidad.
but if i select PD only have to select on stmax the rows where value=PD
PLEASE i need help with this....
I HAVE A DATASETS cSV TEXT FORMAT WHICH HAS A SELECTION OF FIELDS THAT NEED TO BE IMPORTED INTO A TABLE. USING THE ADVANCED IMPORT FACILLITY I HAVE BEEN UNABLE TO IMPORT THE DATA PLEASE HELP AS THIS IS FOR MY A-LEVEL STUDENTS.
THE FIELDS REQUIRED IN THE SESSION TABLE ARE,
Booking ID, Customer ID, Date Booking Made, Pickup Point, Payment Made
The CSV data set attached
tHANK YOU
SIMON
I have 10 tables, 30+ fields on each table (every table has the same 'account number' field). I only need from 5 - 20 fields from each table. How do I get the certain fields from each table and put them in a table, query or report?
View 1 Replies View RelatedHello! I'm new here, and I'm back into Access after a few years of not using it.
What I'm trying to do seems simple, but I can't seem to get the sytax down.
I have 6 columns that have dollar figures in them. I want to get the totals for all 6 columns to show in one field. I'm using the sum([field]) to total the individual columns, but I can't seem to get all of them together in one sum. Is this possible?
Thanks!! :D
hey all, thanks to anyone that can help
i have 5 fields facid custid empid amount invdate.
i need to be able to get totals on the amount based on fac, cust & emp based on a date range given by user, but here's the kicker.. i need to get the current month totals, month totals - 1year (so same month but for last year)
the date range totals, last yeardate range
current ytd, last ytd
i did it using code, but the performance isn't that great. there are 2800 customers it has to cycle through and figured one of the resident experts can help with a query.
i've used dsum() but not quite getting the results i should.
i think one of the problems is the user has the option of filtering the data based on the 3 fields.
anyways if you can help i'd greatly appreciate it..
I'm trying to sum revenue by unit by program by segment but it's seem to be summing it by all units or all programs. my joins
are the first option egaual to both tables. it's a select query and only has two tables. the unit, program, segment are all 'group by' and the revenue is 'sum'. could my joins be wrong or is there another reason i'm not getting the sum by unit by program by segment?
I have a number of fields that hold values (scores - either 0,1 or 2) that need to be summed but in some cases the value is 99 (which is recognised by our stats program as a N/A type of anwer- This occurs when a question is optional and the user hasnt answered it. I did not want to value to be null (since its not like the user didnt answer it because they missed out on it by accident but rather they could not) and it couldnt be 0 either since 0 actually means something different in the context of the questionnaire.Lets say I have Q1 which has a value of 0, Q2 has a value of 1, Q3 has a value of 99 and Q4 has a value of 2I want to get the total of Q1+Q2+Q3+Q4 for a particular entry but if the value of any or all of the questions are 99 I want access to ignore it and just sum the rest of the values i.e. the sum should read 0+1+2+(99)=3 not 102I want to be able to include this sum function in the expression builder if possible since I am using it for a report. Can someone please help?
View 3 Replies View RelatedWould like to create a sum of a field in a sub form. I am using =sum([name of field]) in the footer of the sub form but it only gives me the answer of the first entry in the form. I also created an unbound box in the detail portion =[table1 subform].[form]![name of field]. What am I doing wrong?
View 1 Replies View RelatedIn the footer of my report I have a field that sums the Transaction Amounts - =Sum([Transaction Amount])
I would also like to break the totals down further by Transaction Type Codes.
Something like =Sum([Transaction Amount]) where Transaction Type Code = AL-Exp-Paid
I have a linked table. The table looks like:
Course 1 Name | Course 1 Grade | Course 2 Name | Course 2 Grade |
Student 1
Student 2
Student 3
I need to write a query that will consolidate all the courses (15 total) into multiple rows like this:
Course name | Course Grade
Student 1
Student 1
Student 2
Student 2
What is the best way to do this?
I am involved in centrally managing a project , a part of which involves employees of certain companies being given a weekly subsidy for study on academic courses. I have successfully set up a table for all the learners and a related table for companies.
Each learner will receive a fixed weekly rate subsidy in the first year, and a lower fixed weekly rate subsidy in the second year. Somebody (not me) will need to check their paychecks to ensure that employees have been paid and all is above board. The learners/employees can start on the programme at any time. I need a way to track this (total claimed amounts, where they're up to etc).
My theoretical solution, is to have a field for each week a learner is on the programme (52 first year, 52 second), and instead of entering a currency amount in the field, the check-person can enter the date they saw the evidence and are happy with it. I thought then if I create a query that searches any dates that fall within the current claim period (eg >01/01/2015, <=Date()), and multiplies field count that fall within those parameters by first/second year subsidy rate if they're in that table. I think my logic is sound, I am just not sure how to write the query/expression, or if it's possible, or if there is a much simpler way to do it.
I have 4 revised ship date columns, an est ship date, and an actual ship date. I have a column summing days late for est ship date and one summing revised days late. The expression I am having problems with is to calculate the total days late for the revised. I want it to check the 4th revised and if it has a date calculate from that date. If not I want it to go to the 3rd and calculate from that, and so on. I have pasted the code I was trying to use. It just goes all the way to the bottom of the code and calulates from the 1st revised ship date. I have also attached a jpg of the layout of the columns. I also want to do this in the query using expression builder.
Days Late Revised: IIf( [4th Revised Ship Date] <>null,(DateDiff("d", [4th Revised Ship Date] ,
[Actual Ship Date] )-DateDiff("ww", [4th Revised Ship Date] ,
[Actual Ship Date] ,1)-DateDiff("ww", [4th Revised Ship Date] ,
[Actual Ship Date] ,7)),IIf( [3rd Revised Ship Date]<>null ,(DateDiff("d", [3rd Revised Ship Date] ,
[Code] ......