I have a report I am grouping by a category, and I want to put the total number of records in that category in a textbox in the group footer.
How would I go about doing this? I have searched high and low with no avail...
Despite Google I can't seem to figure this out.
I have some data in a format similar to:
Name / Style / description / speed / distance
john / driver / careful / 80 / 5500
mary / driver / careful / 70 / 7000
pat / racer / reckless / 100 / 6000
anne / driver / careful / 75 / 1000
peter / racer / reckless / 110 / 6500
don / snail / slow / 60 / 6000
I want my report to total by style, without details and to look like:
driver careful 13500
racer reckless 12500
snail slow 6000
How do you get a report to sum the group items by a specific item and to hide the details of that group summing?
I have a report that is group based on a number refered to as "Line". I want to only have three records per group. How can I do this?
View 5 Replies View RelatedI have a a dataset that has recorded encounters with a number of Banded (identified) animals. It is currently setup so that each encounter is its own row; with all the information, including "Band_Num" repeated, but "Encounter_Date" being unique. I wanted to query the table and get it to display the results as "Band_Num" on a row, followed by x columns for with each unique "Encounter_Date" represented. I thought a "Group By" function would work, but that requires a sum, which is not useful.
Complicating this is the fact that not every individual is seen a set number of times, so Animal 1 might be seen 3 different dates, but Animal 2 only on 1 date.
I need to write a report with the following groupings
Customer_GroupHeader
State_Groupheader
Client_Groupheader
Detail Section
Client_Groupfooter
State_Groupfooter
Customer_Groupfooter
What I have noticed, I maybe wrong, the record is a available for the "group_header" section closest to the detai section, in my case, "Client_GroupHeader". However, I need information in the record to format goup header information in the "Customer_Groupheader" and "State_Groupheader. Can anyone help me with this.
thank you
newbie and learning
I've created a report and report has the same number of pages as the number of records that it's displaying.
If there are two records, the report has 4 pages...the first 2 are the actual report and then the other 2 are a copy. If there are 3 records, the report would have 3 copies (...6 pages).
Any idea how to change this so that I have only one copy of the report?
I have a report which gives me a count of records found for each group
group 1 - 10
group 2 - 13
group 4 - 82
what i want is a total below this - ive looked at calculated controls however cant seem to get it what soever - I've tried likes of =sum([counts])
Is there a way to have an expression in the control source of a text box in a report, that re-starts or is exclusive for every group within the report?
View 5 Replies View RelatedI'm sure this is a no brainer for those in the know - but I dont!
So how do I display the total number of records at the end of a report?
I'm creating a report for an imaginary "medical clinic's database", the intended function of which is described as follows: "Create a statistic that shows the total number of distinct drugs prescribed to a patient."
Where I'm at:
I've created a query called UniqueDrugs containing drug and patient info. The SQL is:
Quote:
SELECT DISTINCT Drugs.Drug_Name, Patients.[Patient _ID]
FROM Patients INNER JOIN (Drugs INNER JOIN Prescriptions ON Drugs.[Drug_ID] = Prescriptions.[Drug_ID]) ON Patients.[Patient _ID] = Prescriptions.[Patient_ID]
GROUP BY Drugs.Drug_Name, Patients.[Patient _ID]
ORDER BY Patients.[Patient _ID];
The results of this query seem to be what I need. All I need is for the count formula that I use to return the number of distinct drug names there are that are related to a patient's ID.
I've created a report and I've put the following formula into a text box:
=DCount("[Drug_Name]","[UniqueDrugs]","[Patient_ID]=[PID]")
Where PID is the name of another text box in the report that contains the Patient ID that I want to compare to the drug names returned by the query.
However, this *always* results in #Error, no matter how I change the formula.I have been led to believe that syntax is not the issue, as the following formula worked as intended for a different task:
=DCount("[Prescription_Date]","[UniqueYearQuery]","[Patient_ID]=[PID]")
How do I use a DCount to return the number of different drugs that have been prescribed to a patient?
If it did not require the number of different drugs, I would simply use the following formula, which works just fine:
=Count(Drug_Name)
Hi,
I have a table with a field that shows the number of pieces that a parcel contains. It looks like this:
ParcelID, Pieces, Description
Data example:
1001, 5, Jackets
1002, 10, shoes
etc
I need to print labels for each piece that shows to which parcel it belongs. The report will look like:
1001, Total pieces = 5, 1 of 5 pieces, Jackets
1001, Total pieces = 5, 2 of 5 pieces, Jackets
1001, Total pieces = 5, 3 of 5 pieces, Jackets
1001, Total pieces = 5, 4 of 5 pieces, Jackets
1001, Total pieces = 5, 5 of 5 pieces, Jackets
and
1002, Total pieces = 10, 1 of 10 pieces, shoes
1002, Total pieces = 10, 2 of 10 pieces, shoes
1002, Total pieces = 10, 3 of 10 pieces, shoes
1002, Total pieces = 10, 4 of 10 pieces, shoes
1002, Total pieces = 10, 5 of 10 pieces, shoes
If I could populate a table where the number of records equal the value of the pieces column then it's a pretty simple report but I can't figure this out.
Can anyone help?
In the footer of my report I have a field that sums the Transaction Amounts - =Sum([Transaction Amount])
I would also like to break the totals down further by Transaction Type Codes.
Something like =Sum([Transaction Amount]) where Transaction Type Code = AL-Exp-Paid
I have a report that has four fields: Item, Qty, Price and TotalPrice for each line in the detail section. Total Price is calculated by multiplying Qty x Price. The text box name that holds the Total Price for each line is txt_TotalPrice. I want to have a Grand Total in the report footer. I placed a text box in the footer with the following expression: =sum([txt_TotalPrice]). When I run the report Access prompts me for the parameter value of txt_TotalPrice. I've been trying to solve this for quite a while now - but I'm totally baffled.
View 3 Replies View RelatedI am trying to create a sum of a field called ec2mo where mopp is between 0 and 2 and then another sum when mopp is between 2 and 4, etc... I've tried a number of different things, but it doesn't seem to work - instead i get a single value for each field (i'm assuming because there are different values for mopp and many other fields)... I've attached the db with just that table.
Thanks very much for your help!
P.S. I'm not really at all good with using SQL so anything that can be done in a regular query would be most helpful!
I have a sales form. The sales form has many Call, Meetings and Emails linked to each sales record. I want to total all the number of calls, meeting and email records related to the sales record to give a total- Touches.I've created 3 queries;
1 - Counts Calls
2 - Counts Emails
3 - Counts Meetings
These all work fine however when I combine them to attempt to count the results it doesn't produce the correct results.I have a second query as well (no pun intended).
I am trying to sum together a column that has values in Time. The results displays as a decimal. How can I have the result display as a Time i.e. 1:20 (1 hour 20 minutes).
I am not sure if this possible, the methods I have looked up on the Internet take ages for the query to open but I'll give it a shot.
What I need to do is count (and increment) how many records are returned in a query for each person.
So if 1 person returns 4 unique records, in these records it shows 1,2,3,4 in each record.
The way i have tried is by using DLookup to check the next record and evaluate it using IIF but this takes about 25 seconds to return circa 50 records.
Hello Everyone,I am trying to perform a sum of records for the table belowSeatType| Ext rent | |Internal rent | Work Transfer 2 2VendorOther 2 3LOB BRF GTI BRF 2 5Displacement so that when I run the query I get the following followingSeatType| Ext rent| |Internal rent| | Total |Work Transfer 2 2 4VendorOther 2 3 5LOB BRF GTI BRF 2 5 7Displaceme What I mean is that from the first table how is it possible to get the results below. The query would generate a new column and place the sum of the data in the each row(record) in the same row in the total column. I would be really grateful. Have been bashing my head all day over this. PS I dont know any VBA. Is it possible without VBA?Thank you.
View 5 Replies View RelatedHello & thank you in advance.
I am fairly new to using Access and would appreciate any help.
I have a file with 50,000 records
Example:
NAME CATEGORY
Karen Shoes
Karen Sports
Karen Collectibles
Karen Cars
Bob Music
Bob Sports
Bob Cars
The results that I am looking for are a sum of the total category purchases by each name.
EXAMPLE:
NAME CATEGORY
Karen 4
Bob 3
Is that something that I can do via Acces?
Thank you
I have a query which displays sales and cash deposits for the day. I want a sum of all cash deposits.
So it looks like this..
Date________________Amount_______________SumOfAmou nt____________Exp1
17/7/2013___________$55___________________$55__________ __________$55
17/7/2013___________$22___________________$22__________ __________$22
I tried doing it by two methods.. neither of which are working.
In the Amount field, I put it as a Total: Sum. I also tried creating a new field which is an expression which sums up the Amount field. Neither are summing it and just displays the value.
I have a question about summing information on a report. I am developing a report to see have percentage of time Staff work within a certain area. On the data base the time percentages entered as ranges e.g. 75-100%, or 11-25%. We needed to figure out the total percentage of time so I created a report to add the total time. I used a text box which it titled FTE_Total if embedded iif functions to display the total time. Here is the function I used:
=IIf([FTE_Percentage]="76-100%",1,IIf([FTE_Percentage]="51-75%",0.75,IIf([FTE_Percentage]
="26-50%",0.5,IIf([FTE_Percentage]="11-25%",0.25,IIf([FTE_Percentage]="1-10%",0.1,0))))).
This worked perfectly however I cannot get the FTE_Total fields to sum. I tried the following function in the group footer: =Sum([FTE_Total]) but everytime I try to look at the report in report view I get a message asking for the FTE_Total Parameter.
:confused: Hi everyone,
I have one table that I want to query. It's a basic table that contains:
MYKEY, AMOUNT
1234430, 100
1234435, 200
1234435, 100
1264435, 300
1264430, 200
1154435, 100
1154435, 219
1294430, 983
2010, 845
........ so on and so forth
Now, I simply want to GROUP MyKEY ENDING with 4430 and 4435 into one line and SUM the AMOUNT, thus showing like this:
MYKEY, AMOUNT
1234430and1234435, 100+200+100 --> (123 being the first common group)
1264430and1264435, 300+200
1154435and1154435, 100+219
etc etc.
i tried using simple sum and group by but does NOT work:
SELECT MYKEY, SUM(AMOUNT)
FROM MYTABLE
WHERE MYKEY LIKE ('*4430') OR ('*4435')
GROUP BY MYKEY
It does NOT ROLL-UP the 4430 and 4435 together.
QS: do i need to use VBA for this?
QS: do i need to have subqueries?
QS: please help?
Thanks!
I am using a barcode font in order to generate a number as a barcode on my report records. In order for my barcode scanner to read the barcode it needs an asterisk at the beginning and at the end.
So, if my record ID is 62 - in order for the barcode to be displayed correctly, it needs to be on the report as *62* .
Without digressing into a discussion on barcode methods in Access, how can I precede and succeed each ID number field with an asterisks?
I have a table like the one below. I need to Auto Sequence based on JobIDOne in the field that says sequence in the manner that I've typed. Hand typing is not an option because by table will be updated regularly. All other fields are updated via a form. I need a either a macro or VBA solution that can reconcile this, preferably through the table. Note, I do not want to use a query to create this sequencing or SQL language as I do not know how to write SQL commands.
I know it can be done but I've seen about a thousand ways to do it that I haven't been able to modify for my specific table.
DateOne
TimeIn
JobIDOne
InitialsOne
Dates Worked One
Sequence
7/17/2015
6:45:10 PM
12345
AR
7/17/2015
1
[code]....
Hi,
I've been using excel to keep record uptodate, but i've got more than 300 people to keep track of, so using excel can limit my db.
i'm new to access, wondering if I can get you advice:
Senario:
A community temple, which i'm a member of, spend alot of time loggin who is donating and how much, with pen and paper - then update the excel spreadsheet i've done for them, don't ask me why they do it, its sort of a tradition. Evenone pays about £5 per family, 1 pound for each person.
I was thinking if each familly had a reference number, everytime they donate, they'd give there reference number and the database automatically updates with new records.
So if Mr simpson , ref 69, pays £6, the database adds 6 new records; Granpa, Homer, Marge, Bart, Lisa and Maggie.
how difficult is this to do?
whats best way to design the tables?
Any help is much appreciated.
I have a form where we fill in information for supply of equipment to employees.
Each item must be signed for on a printed report.
I am encountering problems trying to create enough rows in my report detail for each signature of the items supplied.
For example, on the form I will select the "equipment" - 4 hats supplied and 3 boots. On the report I want the equipment set as the group and the detail to be a number or rows which equals the number of selected items. therefore under the Hats group heading I want 4 blank rows which are made up of 3 text boxes - Print Name, Signature & Date and another group heading for boots but with 3 lines.
I have an access form that displays some data about customers and their booking for flight. so lets say if there is a group of five people that made a booking for a certain flight, i have to assign ticket numbers to them and store it in some table.
Now i can display the number of people in a group for a certain flight in a subform, i want to have another textbox in front of their names so i can type in the ticket numbers. So i went to design view and added another textbox, but the problem is if the subform in displaying 5 rows (for 5 customers) when i type in a ticket number for one customer, all the following rows gets and displays the same ticket number. How can i type something and let it not be repeated infollowing rows.