In the footer of my report I have a field that sums the Transaction Amounts - =Sum([Transaction Amount])
I would also like to break the totals down further by Transaction Type Codes.
Something like =Sum([Transaction Amount]) where Transaction Type Code = AL-Exp-Paid
I want to create a Macro saves the report in a specific location, and uses two fields within the report to generate the name of the file. For example, "[Sales Rep Name] + [PayPeriod].pdf" and it should be saved in a predetermined folder.
View 1 Replies View RelatedI am new to access i have a problem which is i have made a form which contains a subform and a read only subreport, what i want is the ability to select a record in read only subreport as in the picture attached and make a button that when i press on it, it should copy the values of the itemsID field, Packing field, ContainerNo field and origin field from the selected record and then paste them in the subform below.
Also i want to add more then one item, so the when i press on another record it should paste the values below the first record.
Hello, I am a newbie access user, so this might be a stupid question, but here it is:
I have a lot of yes/no fields labeled "10/1", "10/3", "10/5", ... (dates)
They are to record attendance on particular days.
I want to make a query that gives me the sum of a student's attendance and I have no idea to go about that. Any help is much appreciated.
Thanks!!
Hi,
Not sure if this is possible (sounds simple hopefully) but I was wondering if there was a way to sum certain fields in a record on a continuous form.
E.g. Field1 and Field2 in record 1.
Is it something simple like summing columns, i.e. Sum(Field1)?
Any help would be much appreciated.
Hi,
I am trying to figure out the best way to design a table. The table is going to contain data concerning checks that have been given to a church. Each check could be broken down into 3 different categories; Tithes, Offering, Other. In other words one check for $100 dollars might be Tithes $40.00, Offering $30.00, Other $30.00. I need to be able to enter these three amounts into the record and then have them totaled in another field.
Is it best to do this all in one record or should I have two tables? If I have two tables how do I get one form to enter the break down into one table and the total in another table. Fyi, if I do this in one record I don't want them to have to enter in the total. I want the total that is entered to be calculated by the three previous fields.
Thanks for any help you can be on this.
Is there a way to use a query to sum totals of several fields per record? In the db I have designed, I have 5 seperate fields for estimates from different departments. There is also a field for Total estimates. What I would like to do is have the Total Estimates field autocalculate the total sum of the other 5 estimate fields. Is this possible to do through a query? If so how? If not - is it possible at all?
Thanks!
I have 2 fields, Accounts, Accounts CMO. I need those two fields to show in the same table in a new field called Total Accounts. I am summing them, but getting irregular results, some are right, and some are 4 times more than they should be? How would you go about doing this, maybe I am missing something.
View 1 Replies View RelatedHi! I'm trying to create a query using option groups, i have two options the first one is STOCK and the other is PD.
If i select stock the the query i want to create to introduce it on a form is:
I have 5 fields
-denominación
-reserva
-almacen
-cantidad
-stmax
If i select stock
then the query is
If (reserva +almacen)<cantidad then on a sub form have to appear the table with all the rows where (reserva +almacen)<cantidad.
but if i select PD only have to select on stmax the rows where value=PD
PLEASE i need help with this....
I have run into this problem with several databases I have created. I have my tables all set to store my information. I create the form to enter the information. I try to create the field to calculate a total and every time I enter the amount in the form, I get '?name' or '#name'.
With this particular database, I am looking to track expenses. Expense categories on the left, dates across the top, amounts in the middle, totals across the bottom for dates and down the right for categories.
If there was a way to attach a document, I would send the expense report. If you want to look at it, let me know and I will send it. It's a small xls file.
Thanks.
DT
Despite Google I can't seem to figure this out.
I have some data in a format similar to:
Name / Style / description / speed / distance
john / driver / careful / 80 / 5500
mary / driver / careful / 70 / 7000
pat / racer / reckless / 100 / 6000
anne / driver / careful / 75 / 1000
peter / racer / reckless / 110 / 6500
don / snail / slow / 60 / 6000
I want my report to total by style, without details and to look like:
driver careful 13500
racer reckless 12500
snail slow 6000
How do you get a report to sum the group items by a specific item and to hide the details of that group summing?
Hi all, sorry to bother you all, especially if this has already been answered, but I can't seem to find the solution to it. Assuming that what I've been doing has been correct that is.
I have three (3) tables with the following fields (where PK is primary key);
[tbl Ingred]: IngredID (PK), ProdID_fk, CompCode, IngredName, Weight, Symbol, RP01, RP02, RP03, RP04, RP05, RP06, RP07, RP08, RP09, RP10
[tbl Prod]: ProdID (PK), ProdName, FP, BP, SBU, ProdNotes
[tbl RPCalc]: RPs, RPs_long (PK), Sym, Limit, Sym_1, RP_1, Comp_1, Add, RP_01, RPNotes
[tbl Prod] has a one-to-many relationship with [tbl Ingred]; that is, for one ProdID, there can be many IngredIDs. The tables are designed so that the final user-displayed form is 'user-friendly'.
I've made a qry called [qry Qcalc] used to calculate the the Quotation (Q) of each of the 10 RPs (RP01 - RP10). Which simply for the first one is; QRP01: [Weight]/[tbl RPCalc_1].Limit, where the [tbl Ingred].[RP01] is linked to a corresponding [tbl RPCalc], by the [RPs] field. As for one [RPs] there may be multiple [RPs_long]. The way it is set up is so that the [RPs] and [RPs_long] are mapped correctly, to be used for calculations.
However, I am now stuck with a problem. I need to sum up these QRP values ([QRP01] - [QRP10]), based on (at least?) two conditions. The user can enter in their RPs; e.g. R10, R20, R21 in any of the [RP01] to [RP10]'s, and in any order.
What I need is to be able to obtain a sum of the Q values for each [RPs_long] (e.g. R10, R20, R21), rather than being the sum of the fields [RP01] to [RP10]. Also, each [RPs_long] may or may not be able to be summed up, depending on another field [Add] which has a "Yes" or "No". "Yes" is for it being able to be summed up, and "No" for it not being additive.
So the end result would be; for each [ProdID], there will be multiple [IngredID] where each will have up to ten (10) "RPs" (that being the [RP01] to [RP10] fields). These inputted "RPs" are then related to [tbl RPCalc] to be able to obtain the Q-values. If the Q-Value is not greater or equal to 1 (>= 1), then the sum of the Q-values for each [RPs_long], provided that the [Add] field is "Yes", will then be able to determine what are the final output RPs to be used, i.e. for the sum of the Q-values are greater or equal to 1 (>= 1), that [RPs_long] will be used.
I've been stuck on this for quite some time, and I know that if I change the whole table structure (like having a field for each RPs in the [tbl Ingred]), I might be able to make it much easier for myself. However, by doing so, it will not be able to offer as much flexibility in the calculations, and also, may not make it as 'user-friendly'. Another thought was maybe to create another table with just the [CompCodeID] (based on [tbl Ingred].[CompCode]), [Weight], [RP], but I'm not too sure how this will work either, but I might give it a shot if this current method doesn't work.
I hope that this made sense, as it is all quite complex (and confusing) to me. Any help on this matter will be much appreciated. Thanks in advance.
I have a number of fields that hold values (scores - either 0,1 or 2) that need to be summed but in some cases the value is 99 (which is recognised by our stats program as a N/A type of anwer- This occurs when a question is optional and the user hasnt answered it. I did not want to value to be null (since its not like the user didnt answer it because they missed out on it by accident but rather they could not) and it couldnt be 0 either since 0 actually means something different in the context of the questionnaire.Lets say I have Q1 which has a value of 0, Q2 has a value of 1, Q3 has a value of 99 and Q4 has a value of 2I want to get the total of Q1+Q2+Q3+Q4 for a particular entry but if the value of any or all of the questions are 99 I want access to ignore it and just sum the rest of the values i.e. the sum should read 0+1+2+(99)=3 not 102I want to be able to include this sum function in the expression builder if possible since I am using it for a report. Can someone please help?
View 3 Replies View RelatedWould like to create a sum of a field in a sub form. I am using =sum([name of field]) in the footer of the sub form but it only gives me the answer of the first entry in the form. I also created an unbound box in the detail portion =[table1 subform].[form]![name of field]. What am I doing wrong?
View 1 Replies View RelatedI am involved in centrally managing a project , a part of which involves employees of certain companies being given a weekly subsidy for study on academic courses. I have successfully set up a table for all the learners and a related table for companies.
Each learner will receive a fixed weekly rate subsidy in the first year, and a lower fixed weekly rate subsidy in the second year. Somebody (not me) will need to check their paychecks to ensure that employees have been paid and all is above board. The learners/employees can start on the programme at any time. I need a way to track this (total claimed amounts, where they're up to etc).
My theoretical solution, is to have a field for each week a learner is on the programme (52 first year, 52 second), and instead of entering a currency amount in the field, the check-person can enter the date they saw the evidence and are happy with it. I thought then if I create a query that searches any dates that fall within the current claim period (eg >01/01/2015, <=Date()), and multiplies field count that fall within those parameters by first/second year subsidy rate if they're in that table. I think my logic is sound, I am just not sure how to write the query/expression, or if it's possible, or if there is a much simpler way to do it.
[AR&R Hours]+[PTO # of Hours]+[Meeting/Calls # of Hours]+[System Issues # of Hours]+[BAU Training # of Hours]+[Exception Processing Hours]+[AIG Related Activities]+[Admin Work Hours]+[Migration Hours]+[Project Hours]
Need the fastest and easiest way to auto calculate the above in a field on a form. i can get it to calculate in a query but need it to do in the form as well.
I have a report that has four fields: Item, Qty, Price and TotalPrice for each line in the detail section. Total Price is calculated by multiplying Qty x Price. The text box name that holds the Total Price for each line is txt_TotalPrice. I want to have a Grand Total in the report footer. I placed a text box in the footer with the following expression: =sum([txt_TotalPrice]). When I run the report Access prompts me for the parameter value of txt_TotalPrice. I've been trying to solve this for quite a while now - but I'm totally baffled.
View 3 Replies View RelatedI have a report I am grouping by a category, and I want to put the total number of records in that category in a textbox in the group footer.
How would I go about doing this? I have searched high and low with no avail...
I have a sales form. The sales form has many Call, Meetings and Emails linked to each sales record. I want to total all the number of calls, meeting and email records related to the sales record to give a total- Touches.I've created 3 queries;
1 - Counts Calls
2 - Counts Emails
3 - Counts Meetings
These all work fine however when I combine them to attempt to count the results it doesn't produce the correct results.I have a second query as well (no pun intended).
I am trying to sum together a column that has values in Time. The results displays as a decimal. How can I have the result display as a Time i.e. 1:20 (1 hour 20 minutes).
I have a question about summing information on a report. I am developing a report to see have percentage of time Staff work within a certain area. On the data base the time percentages entered as ranges e.g. 75-100%, or 11-25%. We needed to figure out the total percentage of time so I created a report to add the total time. I used a text box which it titled FTE_Total if embedded iif functions to display the total time. Here is the function I used:
=IIf([FTE_Percentage]="76-100%",1,IIf([FTE_Percentage]="51-75%",0.75,IIf([FTE_Percentage]
="26-50%",0.5,IIf([FTE_Percentage]="11-25%",0.25,IIf([FTE_Percentage]="1-10%",0.1,0))))).
This worked perfectly however I cannot get the FTE_Total fields to sum. I tried the following function in the group footer: =Sum([FTE_Total]) but everytime I try to look at the report in report view I get a message asking for the FTE_Total Parameter.
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
View 2 Replies View RelatedHey guys,
Is there a setting that will allow me to make specific fields in my table read-only unless I enter a password, or I am the DB administrator?
Erm, hi this is my first post!
Basically im creating a db that the company i work for will use for invoicing creating orders storing the clients we have and so on. This is my first time using access and ive been working on this project for a few months so my vba knowledge is pretty poor to say the least.
What i need is for the orders form to view the current order i have open in report format. Everything on this order form works and is linked to the invoice report that i created, i even managed to get it to print the current report. I just cant seem to get it to view the specific order im looking at, ive tried loads of things from using my crap vba to queries..
Would greatly appreciate some help on this as my boss needs this db completed asap.
Cheers,
MarcF.
Hello everybody. I am new to Access and as such I don’t know how to perform the following. Please help me out.
The project is about a library loan system. I have a database consisting of the following tables: member (MemCode, LName, …), book (BkCode, Title, TotalCopies,…), purchase (PurDate, BkCode, CopiesBought,…) and transaction (MemCode, BkCode, RentalDate,ReturnDate,Returned).
TotalCopies is the total no. of copies there are of the book
CopiesBought is the number of copies that have been purchased
RentalDate is the date on which book is being loaned
ReturnDate is the last date on which the book has to be returned
Returned is a Yes/No field to indicate if the book has been returned
In the library a member can take only one book at a time.
Problem 1:
The library may have several copies of a particular book, but all will have the same code. For example, a book, let’s say Harry Potter 6 has code 97. Initially only 1 copy of the book is purchased. When the librarian sees the book has great demand, he decides to purchase 3 more copies. All the copies will have the same code, i.e., 97. Only the TotalCopies will become 4.
BkCode is Autonumber in book table and Number in Purchase table. Relationship is 1:many.
I have a Purchase form to record details of books being purchased. I have a command button “Book form” that opens the book form when the user clicks on it. He will use it if the book being purchased is not already available in the library. What I want is:
(i)If he opens the book form to fill in details of the book, then when he closes the form I want the book details to automatically appear in the corresponding fields on the Purchase form.
(ii)The CopiesBought will have to be used to update the TotalCopies in the book table. How should I do this?
Problem 2:
When the user wants to record a loan, the system will need to check if that member already has a book which he has not yet returned. If it is so, then the system will need to provide a prompt to inform the user of this and consequently blocks the user from completing the transaction. How do I do this?
Thanking you in advance for your help.
I have 7 combos, which for the most part set the value in another field - however, there are two values in the combo that do not have a value attached - one is AH, the other is SK. I have two textboxes (one for AH, one for SK) that I wish to have a count (preferably running) of how many times each of these values appears in the seven combo boxes.
View 5 Replies View RelatedWe have a PHP website that utilizes an Access 2003 SP3 database. This website is used as an authorization process for a business process in our company. On the website, 8 different people must "sign off" on the process. This sign off process simply consists of typing your name and date into two different text boxes, as well as a third drop-down menu for "APPROVED" or "DENIED". These, of course, correlate to their respective fields in the Access database.
Within the past year or so, the 8th approval section was added. Since then, there have been sporadic issues where all of the approval fields would simply be erased and everyone has to go back to the form and "re-approve" their fields. I believe we have narrowed the issue to when the 8th person signs off before the 7th person. However, the approvals are not cleared every single time this happens, but this condition exists every time data is cleared. So my question is, would this be an issue related to access, or with the coding of the website?