I have four fields in a Table. They are all four date fields. I want to do a query and see information in all four fields, but I only want to see the information if it is before a certain date.
So far I have tried this:
<Date().
This works but it shows all four fields even if it is after this date. How can I suppress the fields to appear blank if the date is not before today's date?
We use an Access database to review multiple banking regulations on a sample of loans each month. I have reports set up to show the findings of different requirements. Each field is populated with a "Yes" "No" "N/A" or is left blank depending on the loan characteristics.
My queries pull regulatory errors if any of the fields = "No" and the reports show all regulatory requirements for that loan. For example, if the loan has real estate as collateral and no flood determination was ran prior to loan closing, they would select "No" from the combobox and it populates the field. All questions dealing with the flood laws populate on the report.
[U]If I want to show ONLY the fields that say "No" with the corresponding label, how do I get all fields that say "Yes" "N/A" or are blank to disappear, the corresponding lable to disappear, and the data to "shrink up" so there is not a lot of blank space?
I have a command button that opens a report with a where filter. The report has a main section and a detail section. Its a Organisation and its Contacts. The Contacts are in the detail section. How can I suppress the detail section (and a label) if there is no records to show in the detail section?
I've created a report which shows zeros in various columns where there aren't any values to report. I think the report would look better and be easier to read without these zeros. I would like to suppress them and display blanks instead. I'm not sure how to do this.
Dim rs as object Set rs = Me!RecordSet.Clone rs.Find first "[Student_ID]='" & Me![Combo134] & "'" Me.Bokmark=rs.Bookmark
If Me! Major_CD = "F16" or "616" or "611" msgbox "MUST COMPLETE SURVEY" End if
End sub
A student ID number is entered into a combobox and it returns name, Major_CD(Major Code) and Degree type. If the major code is "F16" or "616", a message is displayed.
How do I suppress this messagebox the the student has a different major code? In other words, there are students in the database with other major codes that are 111, 121, 363. I would like for the other major codes to NOT display a message box. Right now, it displays a messagebox for everyone.
I have a report that is linked to a query... lets say my query returns no records the report comes up with a whole bunch of #Errors on it. How do i prevent this from happening?
I have a subform which has loads of check boxes for each record but i want to suppress certain boxes depending on criteria in each record. I think i need to do a For..Each statement but, as my user name suggests, I'm buggered!.
i am receiving an access-generated message "Data has been changed".. All of the processing works correctly.. but i get this message. i receive this message on an edit form of mine.. this form has a continious subform.. fields are account and amount.. if i wipe out the first one (account/amount).. that is when i receive this message.. very annoying.. but only happens when i wipe out the FIRST one.. if i wipe out one in the middle or end.. then i get no message.. i searched microsoft, here, and googled it and came up with nothing.. anyone have any ideas?.. thanks!
I need to suppress/hide a blank row on a subform. The Main form is based on a table, contains Site Header information The Subform is based on another table containing Sample Details records
Site Header table to Sample Details table relation ship is one-to-many, with two key fields SiteID and SiteVisitDate
The Form/SubForm is linked by SiteID, SiteVisitDate
The form adds one record to the Site Header Table. Then adds mutliple records to the Sample Details table for that SiteID. Some fields are populated with a script, while others are populated by user input
An empty/blank/new row always appears on the subform before & after the Sample Details are added. The blank row Before new records are added is not a problem but when it appears after new records are added is a pain
When i try to insert data into a backend Oracle table (with ODBC) using a form, (i use docmd.runsql "insert....") Access gives me a message like"You are trying to append 1 row to the table are you sure you want to append?"
i want to suppress this message as i have to insert into 2 tables and delete from 3 tables when the user enters some data in the form, so it asks the user five times (say 2 times for insert and 3 times for delete..) when it inserts or deletes each table. the user doesnt want this to click every time when they do that... how do i suppress these messages, is it Access-specific or oracle specific? I am not able to do this..! is this any kind of exception that i have to put in??
I have a button on a form that appends data to a table. When I click the button, I get 2 warnings:
1) "You are about to append 1 row"
2) "Microsoft Access can't append all the record in the append query."
I know I can use docmd.setwarnings = false then set back to true, but I'm only interested in suppressing the 1st warning, and I want the user to see the second warning.
Is there any way to suppress the 1st warning and display the 2nd?
I have a report that calls a subreport. In most instances, the subreport will have no data and I won't want to show the subreport. I've tried various ways to deal with this:
1) Make the subreport property on the main report the minimum height and set CanGrow = Yes 2) Use the Report_NoData event on the subreport and add the code 'Cancel = 1' 3) Make all the fields on the subreport the minimum height and set CanGrow = Yes
None of these seem to work. I don't have any headings on the subreport, so the only price I'm paying is adding a gap onto the main report the size of one detail line of the subreport. Still, it leaves the report lacking professional quality.
I build the WHERE clause in my form's record source dynamically, depending on the context in which the user opens the form. I can't put the WHERE predicates in the record source and refer to fields on another form, as the context will determine which predicates are required. So I have code like this:
Public gf_FormInstance As Form Dim strSelect as String : Set gf_FormInstance = New Form_F_PerformanceSummary : gf_FormInstance.RecordSource = strSelect gf_FormInstance.Refresh gf_FormInstance.Visible = True
The problem is, the Set statement causes the New form instance to retrieve all records from the existing record source, slowing down the performance.
I'd like to find a trick to suppress the retrieval of records when the Set statement executes, and then allow them to retrieve when the Refresh statement executes.
I've got a report that is displaying addresses which are all identified as 'public' or 'private'. I want to be able to display the 'public addresses' and leave the 'private' addresses blank (but still show other fields.. phone no.s etc). The field that the data appears in is Address 1 (for both public or private), depending on what the data entry clerk has selected as the preferred address (ie public or private).I've been playing with the Iif function, but have not had any success...
Address Type: Private or Public Address1: Address details
How do I suppress the numerical values from being displayed on the "yes/no" check boxes when a user clicks directly in the field, instead of clicking the arrowhead as they should?
Any way in report that I have 2 reference queries just 1 is to populate all details and 2nd query to filter details and will be the final reporting information???
I have a query that creates counts of fields based on the data in other fields, basically it tells me that in a table there are two entries with value ABC????? and three of DEF????? , the query works perfectly.
When I create a form to display this data and base the form on the Query I keep getting a message box asking for the ID (key field) from the base table.
If I type * in the box (to denote all values) and press enter I get the results expected.
Hi I have sendkey "{f7}" on loss focus. this works great as a spell check but then I get the mesage box that spell check is complete. How do I stop this box from occuring?
:confused: I am trying to help someone with a complex problem (so it seems to me) but I will first ask about what should be a simple thing....
First goal: to COUNT the number of times a TYPE of visit is made. There are several different TYPEs but only interested in tracking 2 of them.
When a crosstab query is created - if one of the 2 parameters are not "met", a blank is returned. I have been reading posts about using NZ and IIf IsNull, etc to get past that - but none of them make any sense to me and the Access help suggestions do not work. Hope someone can make it clear with this information: (can't give more specifics to keep privacy intact)
The SQL was written by Access not by me. :)
Here is an example of the Crosstab SQL (which is using a previous query):
TRANSFORM Count([qryTest2.TYPE]) AS CountOfTYPE SELECT qryTest2.CID FROM qryTest2 GROUP BY qryTest2.CID PIVOT qryTest2.TYPE;
----------- qryTest2 SQL: (Grouping by to remove dups)
SELECT DISTINCTROW tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE FROM tblM LEFT JOIN tblC ON tblM.[M#] = tblC.[M#] GROUP BY tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE HAVING (((tblC.TYPE)="Out" Or (tblC.TYPE)="In")) ORDER BY tblM.CID, tblM.LNAME, tblM.FNAME;
Basically i want to sum up the total of fields with a currency value in them from a query! how do i do this
e.g. I run a parameter query at present which shows me all mortgage applications by lender for year 2003 (I enter the lenders name) and the loan of each application.
I want it to sum up the value of all loans from this lender. e.g
I have this query: SELECT A.*, AppointmentCost - Nz((SELECT SUM(PaymentAmount) FROM tblPayment P WHERE A.AppointmentId = P.AppointmentId),0) AS AppBalance, Date()-AppointmentDate AS DaysOutstanding FROM tblAppointment AS A;
When I run it shows: AppointmentID PaymentID AppointmentCost AppBalance DaysOutStanding
I would like the first and last names of patients to show up in this query I have a table called tblPatient which has these two fields in it. Colud you please show how to do this, if it is even possible?
There are 2 types of paths a project can follow: ELC and SDLC. In my database, the user must choose which path they are following for their project.
Once they choose a path, they must then fill in one of the two appropriate grid with dates.
The two grids have around 40 fields each.
I am trying to write a query that looks at the response entered for Path and then looks to see if the user entered dates in the wrong grid. (If they choose ELC, they shouldn't have values in the SDLC grid).
For example: iif(Path="ELC" and SDLCDate1<>Null or SDLCDate2<>Null or ...,SDLCDate40<>Null,"Red",Null)
But typing SDLCDate1...SDLCDate40 <> Null is time consuming, messy and Access probably won't allow such a big query.
I need to know if there is a way to change the actual field that is displayed in a query through criteria. There is a DB table at work that has been set up very poorly. The field names are months Jan - Dec. I need to change the field in the query every month based on whatever month I am running the report for. It sucks and I need to find a way for the query to automatically select the proper month field.
My company has a microsoft access table with about 1200 IDs containing names, addresses etc. Now I want to print this out in an excel sheet because I want to create address stickers, but I want every cell in the excell sheet to add information about the columns in the database together. I might be very unclear, let me demonstrate what I mean: The Acess file might look like this: id | name | address 1 | john | Street 01 2 | sara | Street 02
Now I want to have 2 excell cells which contain the information like this: name_address name_address
In my example, 2 cells with the following information:
john Street 01 sara Street 02
So I dont want 4 cells, I want to add the information together from 1 Id to 1 cell, but I also want to add linebreaks to it, It must eventually become an address sticker